The device has been trying for days to auto-download and all it does is fail constantly. Saying that my connection is slow - gee, I have FiOS, I know it's not slow,maybe it's your Servers Cisco?Well, where can I obtain the direct DL link to that firmware file instead of relying on an unreliable device to get it and apply for me?
View 4 RepliesI have a 4200V2 acting as a Router and (2) more E4200V2's acting as Access Points,The E4200V2 acting as the Router is at Firmware 2.0.37, but, the other Access Points are at Firmware 2.0.36.126507 and when I try to have the Firmware Upgrade Utility in Setup update the Firmware it gives me this message:"Current Version: 2.0.36.126507Available Upgrade: Your router software is up to date"Where is the downloadable Firmware 2.0.7 located?How do I upgrade the Firmware Manually to 2.0.7 and should I ?
View 6 Replies View RelatedI just purchased 3 E4200v2 routers. As I am prepping them to install, I am attempting to update the firmware from 2.0.26 -> 2.0.37. I downloaded the zip file from the Cisco support site and when unzipped the file is named FW_E4200_2.0.37.131047.SSA. When I attempt to do a manual update from the Admin page, I imediately get an image file is incorrect error.
I've downloaded the file a total of three times on 2 separate networks and have tried three different browsers to attempt the update, all with the same error. The support chat sessions have proven worthless, they seem very scripted and the last one kept trying to sell me a support contract...
I want to stay with the Classic firmware, even though it is lacking current bug fixes. Does anyone have a "good" copy of the 131047 firmware? It appears to me that the one on the Cisco site is broken.
Just a few things I've noticed with this build..
1.) If you reboot the modem, it seems to loose UPnP settings. I have to turn UPnP off then back on again in order UPnP to work normally.
2.) Probably petty but when I click the Disconnect button under Router Status, the page doesn't automatically refresh like it did with E4200v1. I have to manually refresh to get the connect button to appear. The refresh issue is also true within the mobile app. Again, not an issue with E4200v1.
link to the original v1.0.0 firmware for the E4200. That was the best firmware for me and sadly I can't find a link to go back. v1.0.0 really had no problems for me. I initially skipped v1.0.1 becuase it disabled IPv6 which is a feature I want. v1.0.2 broke my YouTube and Netflix streaming. So I went back to v1.0.1 and my Netflix and YouTubue steaming returned to normal but I lost IPv6.
Any solution to Netflix and YouTube streaming problem on v1.0.2 when IPv6 is configured. (I'm positive the video is streaming over IPv4, but the IPv6 connectivity is available.)
I was just online when all of a sudden i lost connection. I have a WRT54G V8 and did a quick little browse and found out it could be corrupted firmware. When i download the firmware it wants to download as a .bin file and open VLC Media player!? How do i change this or what do I need to open it with?
View 7 Replies View RelatedV2.0.26.124551 is now available. I did the online upgrade and it took just a couple of minutes including the reboot. The firmware is not available as a download yet for manual install. This firmware is dated 11/14/11 so it doesn't appear to correct the Port 53 issue reported earlier.Release Date: Nov 14, 2011 Firmware version: v2.0.26 (Build 124551) - Support for the WAN L2TP and PPTP protocols
View 1 Replies View RelatedWhere can I download the 2.0.36 firmware?I flashed it through the UI but since the factiry fw is crap I want to try the third party firmware that are available but I want to make sure there is a path back to factory version in case I need to return the product.
View 1 Replies View RelatedI was playing with the router/gateway settings on my WRT54G v3.1 router.... and I managed to hose it. I tried power cycling/ resetting it will not route my traffic through anymore...although i can still get to the setup menu.I am trying to download the firmware to flash it but.
A) the site says that for this v3.1 router I need to use the ancient firmware 4.21.1 and
B) the link to the firmware does not work !!! it downloads an empty zip file url...
linksys support, if you are listening, please restore the link to the firmware so I can try and fix my router.
I have the original firmware, having some rebooting issues, I want to upgrade the firmware, but can't find anywhere to download it! my current firmware is 1.01.06?
View 6 Replies View RelatedWhere can I download the latest firmware for my wrt600n?
View 1 Replies View RelatedWhere I can download an updated firmware for my WRT54G RG
View 4 Replies View RelatedThe firmware update will not download?
View 1 Replies View RelatedI am considering the e4200 Vs the Asus RT-N56U router -- if " download master" type of functionality possible with the e4200 ?(Its a little app that comes with the asus router that allows you to download files directly to the USB storage even after the computer is switched off)
Could I do something similar with the e4200 ?
I am a avid fan of Linksys routers. But one feature which i feel isn't there on linksys is the ability to start downloads on the router and also peer to peer capability such as torrents. Asus routers have this and it works flawlessly love to have this feature on the Linksys routers. This is one and only request i ask for in firmware update
View 5 Replies View RelatedI usually download and update on my Nas in my house. I conneting my nas to the e4200. My laptop get full wifi from my router, but the speed up and down is very slow. I setup the wireless everything is auto.
View 1 Replies View RelatedWhen I click on the pdf icons or the "User Guide" link on the E4200 product page, Firefox 5.0.1 pops open a new window, but it's blank. I can't see the pdf file. Usually, when I click on a link to a pdf, FF gives me the option of saving or opening the file.
View 1 Replies View RelatedDownloading the latest firmware for the E3000. Seems like the link on the page is broken.
View 1 Replies View Relatedis there a link to directly download the EA4500 firmware?
View 3 Replies View RelatedI have a problem with my WRT54G V8 router.I download a wrong Firmware and upgrade it.After this my router never work again.The PC can't get IP from the router.I tried a lot of time to access to the web admin 192.168.1.1 and other IP and nothing happen.I made a lot of reset cycles, with the procedures 30/30/30 or other with the reset button in combination with the power cord.
Exist any other possibility to recover my router.Can I open and touch other button inside the board or something like this?
All I want is functional Wi-Fi in my house like the rest of the world. Unfortunately, I cannot have that for whatever reason.
Now that I said that, Let's me get down to explaining my issue. I orginally owned a Linksys WRT350n. This router worked fine for years, untill one day I decided to do a speed test on my new Motrola Atrix. My Wired computer gets ~22000kbps down and 4000kbps up... My wireless speedtest on my Atrix yielded 2000kbps down and 4000kbps up. I assumed it was the phone, so i went and tried every other wireless device in my house. Everyone of them got the same result.. 2000kbps down.. 4000kbps up.
At this point I went into my router settings and tried every available channel, all of them yielded the same result of 2000kbps down and 4000kbps up.. At this point, I assumed it was the router. Ive had it for a few years and figured it was just reaching EOL. I rushed to my nearest bestbuy to pick up a brand new Linksys E4200. I brought it home, hooked it up and was eager to test my new wireless speeds. Unfortunately the same results of 2000kbps down and 4000kbps up was the yield. Once again, I've tried every possible channel with no change to my speeds. At this point I called up Linksys/Cisco support.. They were POSITIVE it was a hardware issue and had me exchange the router, even though I informed them i had the same issue with my older router of a different model. I went along with it anyway, and exchanged my router. Same issue. I called Cisco/Linksys back up and informed them, and basically they told me "they'd make a note of the issue and call me back at a later date."
I downloaded a WiFi Analyzer on my cell phone. Theres only two other dectable networks in my area, and they are low low low signal. So, I don't believe it's heavy saturation. The router is in the same room as 3 of the wireless devices that get 2000kbps down/4000kbps up. So it's not range either.
I am a avid fan of Linksys routers i blindly go buy it. But one feature which i feel isn't there on linksys is the ability to start downloads on the router and also peer to peer capability such as torrents. Asus routers have this and it works flawlessly love to have this feature on the Linksys routers. This is one and only request i ask for in firmware update?
View 1 Replies View RelatedIm trying to optimize my E4200 settings and Ive noted that ping and download speeds are extremely slow for the internet service I signed up for. Ping speeds are consistently more than 1000ms and dowload speeds typically are less than 3Mbps. These are for both wireless and wired connections to the E4200 router.
When I disconnect the router and hardwire my laptop directly to the the modem, ping speeds are less than 100ms and download speeds are 20Mbps.
Simply put, webpage loading is at a snails pace with wireless and wired connection the router, but blazing fast when hardwired directly to the modem.
On a seperate issue, the iMac I have is also **bleep** slow even when hardwired directly to the modem. Is there an obvious router setting Im screwing up? Router is updated with the latest software.
There is a new firmware for the E4200 router and I have no clue how to get the file. I've been searching in the support section » download tab without success. Any link to the new firmware how to get it?
View 1 Replies View RelatedI was looking for alternative firmwares until Linksys fixes their broken device.What do you guys make of this Tomato firmware? Do you think it has usb drive and Media Streaming (Twonky) support?
View 2 Replies View RelatedThe file uploads fine, but I get an error message saying the router can't be updated atthe moment. I want to do the update because as of now, the router can't see my drive connected on usb (one ntfs partition and another one called wbfs, maybe that one is causing the issue about the drive).
View 2 Replies View RelatedI currently have Model name: Linksys E4200 Firmware version: 1.0.04 build 11 Software version: 1.4.12100.0
I'm trying to upgrade to the second and most up to date version. (Version: 2.0) firmware. Any links or way to do this? I tried doing it through my router settings under administration -> firmware upgrade but it won't update automatically. I have to find the actual update file and update the firmware through that.
Nom du modèle : Linksys E4200Numéro de modèle : E4200Numéro de série : 01C10C17152754Version du microcode (firmware) : 1.0.03 build 14OS : Windows 8Version du logiciel : 1.4.12284.0Type de connexion (réseau étendu) : DHCPAdresse IP (réseau local) : 192.168.0.1Adresse IP (réseau étendu) : 192.168.1.101Adresse IP de l'ordinateur : 192.168.0.135
I downloaded this file :[URL]I upgraded it, I typed 192, etc. in firefox, when to the maintenance tab, put the dowloaded file in "new firmware location" and clicked "update". It said: "you put a wrong file".this is written in the same tab : Current Firmware Version 6.0.0 Build 100906 Rel.43560
I am waiting for half year. And I read the forum know the NAT though put perfromance of 1.0.01 is poor than that of 1.0.03 of E4200.Actually a bit disappoint to CISCO LINKSYS products. It is not value to cost high selling price with poor functions and performance.
View 4 Replies View RelatedI had a e4200,and i used 5ghz wireless.i can't set it to channel 149 or other high channel,my old wireless ethernet card can only support that.make the next version of the firmware can setting 5ghz channel to channel 149、153、157、161.
View 2 Replies View RelatedI cannot connect to my company’s VPN after installing the current firmware (FW_E4200_1.0.02.013_US_20110524) on my E4200 router. Version 1.0.01 was on the router when I received it, and it worked without issues. As soon as I upgraded version 02, I could not initialize a VPN connection. When I try to start a VPN session, I get a "page not found" error when attempting to initiate SSL VPN service using a Microsoft Forefront Unified Access Gateway. VPN pass through is enabled for all protocols in the e4200’s setup. As soon as I revert to firmware 01, everything works fine again.
I did a fresh download and re-flashed the 02 firmware just to make sure that it wasn’t an issue with a bad download or a faulty flash. The problem is consistent and repeatable. I have upgraded and downgraded twice, and the results are exactly the same. My VPN connection works with firmware 01, and it fails with version 02. There is a something different in the 02 firmware that is blocking VPN access.
I've tried to upgrade/downgrade process twice with the same result. After few days without any issue 2.1.39.145204 gets stuck (=routing to internet doesn't work although I can ping from wireless network to all LAN IPs) and I need to reboot the router.
I have about 7 devices. Guest network is disabled, parental control is disabled, USB is not used, DHCP service is used, WPA2 mixed personal mode is used, MAC filtering is disabled, DMZ is disabled, DDNS is disabled, port triggering is not used. All the rest of settings are in default values.
As far as I notied the previous version 2.1.39.144146 doesn't get stuck at all.
I am unable to connect both of my smart phones to the access point. I am using WPA2 encryption on the AP. I can connect my phones to other AP's using WPA2. I have other devices that connect to the AP except my Android phones. I would like to be able to get some debug logs except the web interface says that the logging fictions are disabled when in bridge mode. Cisco/Linksys tech support: Any troubleshooting tips other than resetting the access point and or reflashing it.
View 4 Replies View Related