I was just online when all of a sudden i lost connection. I have a WRT54G V8 and did a quick little browse and found out it could be corrupted firmware. When i download the firmware it wants to download as a .bin file and open VLC Media player!? How do i change this or what do I need to open it with?
View 7 Replies
I was playing with the router/gateway settings on my WRT54G v3.1 router.... and I managed to hose it. I tried power cycling/ resetting it will not route my traffic through anymore...although i can still get to the setup menu.I am trying to download the firmware to flash it but.
A) the site says that for this v3.1 router I need to use the ancient firmware 4.21.1 and
B) the link to the firmware does not work !!! it downloads an empty zip file url...
linksys support, if you are listening, please restore the link to the firmware so I can try and fix my router.
Where I can download an updated firmware for my WRT54G RG
View 4 Replies View RelatedThe firmware update will not download?
View 1 Replies View RelatedI have a problem with my WRT54G V8 router.I download a wrong Firmware and upgrade it.After this my router never work again.The PC can't get IP from the router.I tried a lot of time to access to the web admin 192.168.1.1 and other IP and nothing happen.I made a lot of reset cycles, with the procedures 30/30/30 or other with the reset button in combination with the power cord.
Exist any other possibility to recover my router.Can I open and touch other button inside the board or something like this?
I have lost my installation disk for my WRT54G Version 8. Where I can download the drivers and installation.
View 9 Replies View RelatedV2.0.26.124551 is now available. I did the online upgrade and it took just a couple of minutes including the reboot. The firmware is not available as a download yet for manual install. This firmware is dated 11/14/11 so it doesn't appear to correct the Port 53 issue reported earlier.Release Date: Nov 14, 2011 Firmware version: v2.0.26 (Build 124551) - Support for the WAN L2TP and PPTP protocols
View 1 Replies View RelatedWhere can I download the 2.0.36 firmware?I flashed it through the UI but since the factiry fw is crap I want to try the third party firmware that are available but I want to make sure there is a path back to factory version in case I need to return the product.
View 1 Replies View Relatedlink to the original v1.0.0 firmware for the E4200. That was the best firmware for me and sadly I can't find a link to go back. v1.0.0 really had no problems for me. I initially skipped v1.0.1 becuase it disabled IPv6 which is a feature I want. v1.0.2 broke my YouTube and Netflix streaming. So I went back to v1.0.1 and my Netflix and YouTubue steaming returned to normal but I lost IPv6.
Any solution to Netflix and YouTube streaming problem on v1.0.2 when IPv6 is configured. (I'm positive the video is streaming over IPv4, but the IPv6 connectivity is available.)
I have the original firmware, having some rebooting issues, I want to upgrade the firmware, but can't find anywhere to download it! my current firmware is 1.01.06?
View 6 Replies View RelatedWhere can I download the latest firmware for my wrt600n?
View 1 Replies View RelatedI go to the support page for the WRT54G routers. I set the version number to version 2 and there is no firmware file to download. For every other version there is a firmware file to download but not for version 2. Where can I get the latest firmware for my router.
View 1 Replies View RelatedMy current unit is at Firmware Version: v1.02.8 What can I do?
View 3 Replies View RelatedThis seems to be an epidemic issue with LinkSys routers (with me myself running in the third such issue).This time, I would require the original firmware of the WRT54 ver. 4 series. Download links in older threads have 404d already.
View 1 Replies View RelatedIn hopes of fixing some "flaky" connection issues with my WRT54G V2 Wireless Router, I downloaded and applied the new firmware version released on 08/18/2011, Ver.4.21.4 for my Version 2 Router. I downloaded, went through the application process using the router's firmware update process, it said it was successful and then the router restarted and didn't work. Couldn't ping the address, constant flashing Power light, no response at all from router. Tried again, same result. Performed hard reset, same result. Tried a few other recovery techniques found on the web with no success. Finally I did the process found here [URL] This reset the router and I re-uploaded this same 2011 version. Router still broken. I ran through the process again after downloading an older version of the firmware, specifically version V3.1_4.00.7, the upload ran, and the router worked again! This was proof to me that the newest version completely BRICKED my router. I'm so relieved I was able to reset the router and manually recover, but most will never try this. I recommend Cisco retest this ASAP and pull the new release for the V2 router until they get this resolved!
View 9 Replies View RelatedMy Linksys WRT54G router has been dropping out lately and I've been recommended to update its firmware as it is very out-of-date. Well, everytime I try to upgrade the firmware to it, I get an error message that says "the connection to the server was reset while the page was loading." I'm trying to upgrade the firmware through the router's site 192.168.1.1 under the adminstration tab
View 2 Replies View RelatedI am trying to upgrade the firmware, your web site requires the version number, my version is V8, your site offers up to 7.2 ?
View 2 Replies View RelatedI need to reflash a WRT54G version 2, but on the support page I can not find any firmware. Only for version 2.2. is it the compatible also with version 2?
View 2 Replies View RelatedI have a wrt54g (8.1) that was acting a little funny so did some googling and followed the instructions to install new firmware. First the installation failed, double checked to make sure I downloaded the correct file (FW_WRT54G_8.1.09.02_US_20071227.bin), did a reset and power cycle. Checked the information again and everything on the router setup completely disappeared.
View 8 Replies View RelatedI upgraded my WRT54G ver. 2 with the latest linksys firmware update (4.30.5). My previous firmware was 2. something. After the process i lost internet connection and i can't no longer access my router. I tried to reset the router to factory defaults by pressing the reset button for 10 seconds, but nothing happened. I also turned everything off and on again, but still nothing happened.
View 1 Replies View RelatedDownloading the latest firmware for the E3000. Seems like the link on the page is broken.
View 1 Replies View Relatedis there a link to directly download the EA4500 firmware?
View 3 Replies View RelatedThe device has been trying for days to auto-download and all it does is fail constantly. Saying that my connection is slow - gee, I have FiOS, I know it's not slow,maybe it's your Servers Cisco?Well, where can I obtain the direct DL link to that firmware file instead of relying on an unreliable device to get it and apply for me?
View 4 Replies View RelatedI have a 4200V2 acting as a Router and (2) more E4200V2's acting as Access Points,The E4200V2 acting as the Router is at Firmware 2.0.37, but, the other Access Points are at Firmware 2.0.36.126507 and when I try to have the Firmware Upgrade Utility in Setup update the Firmware it gives me this message:"Current Version: 2.0.36.126507Available Upgrade: Your router software is up to date"Where is the downloadable Firmware 2.0.7 located?How do I upgrade the Firmware Manually to 2.0.7 and should I ?
View 6 Replies View RelatedIs there a way to restrict wireless access to my router from wireless pc's in my home. Two grandsons are off from school now, and are playing online games to the wee hours of the morning. Can I do something to have the routher shut off their connection at a certain time? Is that possible. If I have to go back to dd-wrt to do that, fine. I have lynksis wrt54g with their 4.2.1 firmware.
View 5 Replies View RelatedI have tried to upgrade the firmware to the latest greatest but keep getting the "Incorrect image file" error. I bought two of the V1 units and had no trouble with one of them but the other is frustrating me. I have reset it and even tried a tftp upgrade of the firmware but still get "Incorrect image file" even in tftp.
View 1 Replies View RelatedI'm attempting to upgrade to firmware 5.00.38 for my WRT54G-TM router, but it keeps telling me "upgrade failed" after like 3-4 seconds of trying. It says I currently have firmware: DD-WRT v24-sp2 (06/13/09) mega - build 12288. I've tried restetting to factory defaults before upgrading, but doesn't work.
View 1 Replies View RelatedI have an old wrt54g (version 2) which I just downloaded and installed the latest firmware (4.21.4) and now its dead!!!!
factory reset does nothing, cannot connect via a wired connection, nothing. All the lights work fine.
just troed to update FIRMWARE re our WRT54G_v2
current FIRMWAREFirmware Version: v3.37.7
downloaded and tried to run 130228dl_LINKSYS_FW_WRT54Gv4_4.21.5.000_20120220.bin
BUT got msg' Upgrade are failed!;
I ran the firmware upgrade and hit the reset button for 30 seconds and everything went well until I went to restore my personal settings. When I went to the router page it asked for a user name and password but the old user name and password don't work so I am locked out and can't get to the restore page.
View 3 Replies View RelatedI'm attempting to upgrade to firmware 5.00.38 for my WRT54G-TM router, but it keeps telling me "upgrade failed" after like 3-4 seconds of trying. It says I currently have firmware: DD-WRT v24-sp2 (06/13/09) mega - build 12288. I've tried restetting to factory defaults before upgrading
View 3 Replies View RelatedI have wirless router WRT54G ver.2. and I had firmware 2.0 So I downloaded new firmware From Here and did exactly as in instruction.
After update went successful I unplaged my router for 30 seconds but it's not working. I mean it's flashes and everything but can't access it and it is not broadcasting. and whats most interesting, reset buttom is not working
Want can I do? can I access it with some other way and reinstall firmware?
I tried to upgrade firmware (I entered my model number WRT54G and hardware version 2 into Cisco menu and downloded the upgrade file they provided. My version was v2.02.7, downloded file FW_WRT54Gv4_4.21.5.000_20120220.bin . After I run the upgrade it said upgrade failed. After that I can't connect to internet and can't access the router. I tried to reset it and unplug it- no luck. From my PC control panel I see local area connections status connected, but as I said, it does not connect to Internet.
View 7 Replies View Related
