Linksys Wireless Router :: Cannot Download Latest Firmware For E3000 Webpage
Aug 25, 2011Downloading the latest firmware for the E3000. Seems like the link on the page is broken.
View 1 Replies
ADVERTISEMENT
Linksys Wireless Router :: Download Latest Firmware For Wrt600n?
Mar 24, 2012Where can I download the latest firmware for my wrt600n?
View 1 Replies View RelatedLinksys Wireless Router :: E3000 Restoring Factory Defaults / Upgrading To Latest Firmware
Sep 16, 2010I just upgraded to a E3000 from a WRT54G and I am having some issues with network speed.I have no special settings and have even tried restoring factory defaults and upgrading to the latest firmware to no avail.The time I notice the biggest hit is when transferring files locally on the network (WiFi and LAN).Let me note that I do know the difference between MB/s & Mb/s and the like.I have Comcast 20Mb/s Down, 1.5Mb/s Up (just a FYI, the main issue is local transfers)
With default settings my Laptop (ASUS N82JQ, Atheros AR9285 Wireless Network Adapter), connects to the router at only 65Mb/s (with full signal).Upload seems to be more decent ~600KB/s (Transferring files from wireless n laptop to the gigabit desktop).Download seems to be limited to ~150KB/s (Copying files from the wired gigabit desktop to the wireless n laptop).These speeds are horrible! ~5hrs to transfer 3GB of data!
One of my laptops had a card that was capable of both 2.4 & 5Ghz and I was previously getting ~2000-5000KB/s (2-5MB/s) transfers with this router (But I had to do a system restore on it and reset the router). My ASUS laptop seems to only work with 2.4Ghz though. If I change the 2.4Gh Wireless settings on the router to "Auto(20MHz or 40MHz)" the laptop will connect at 150Mb/s, but the speeds are the same slow speeds as above.
Linksys Wired Router :: Where To Download Latest RV042 Firmware
Mar 25, 2009I am going to this page: [URL] but I can see nothing regarding firmware. The "Download software" link takes me to a page that has QVPN, TFTP utilities, etc, but no firmware.
View 4 Replies View RelatedTP-Link ADSL2+ Wireless :: TD-W8960N - Latest Firmware Download Links?
Dec 15, 2012Region : NewZealand
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111130 Rel.56405n
ISP : Snap
I just bought a v3 TD-W8960N and I'm trying to see what is the latest firmware available?On the modem it came with 1.4.0 Build 111130 Rel.56405n.When I look on the website the listed latest version is w8960nv1_un_1_4_0_111108R40398.up (that is the file inside the zip package/link TD-W8960N_V1_V3_111108)Which is the newer version? The revision number on the firmware that came installed kind of looks like it is actually newer. But if it is newer, why is not available for download from TP-Link?
Belkin Routers :: Cannot Download Latest Firmware For N600 DB
Mar 12, 2013Can't download newest firmware for F9K1102/N600 DB Router. I am on 1.00.19 and there are two newer firmwares, the latest being 3.03.12. This firmware is suppose to allow support for Windows 8. All my computers now have Windows 8 so I want this firmware, but I can't download it because the link provided by belkin no longer exists
View 3 Replies View RelatedLinksys Wireless Router :: Latest Firmware For WRT300N V1.0?
Apr 25, 2012I have WRT300N V1.0 with Firmware v1.03.6.what is latest Firmware for WRT300N V1.0 and where I can get it.I tried at Downloads under Support in Cisco website but it said "No firmware/driver download available".
View 1 Replies View RelatedLinksys Wireless Router :: Get Latest Firmware For WRT54GS V1?
Feb 21, 2012I have a WRT54GS v1 router which is currently loaded with firmware version 2.07.1. I want to upgrade it with the latest firmware. Where I can find the latest firmware download for this model router? Linksys does not have it available on their site.
View 2 Replies View RelatedLinksys Wireless Router :: Latest Firmware For E3200?
Oct 13, 2012what the latest firmware is for the E3200? The version i'm running at the moment is 1.0.03. Also how do i download the new version?
View 1 Replies View RelatedLinksys Wireless Router :: What Is Latest Firmware Version For WRT160n
Jan 20, 2013what is latest firmware version is for router WRT 160n (v1). The Linksys site currently states that it is Ver.1.02.11 (11/08/10). However, on the admin page for my actual router it states v1.52.0 Nov 16, 2007. These versions #s and dates don't jive. How could I have a supposedly newer version that is older than the most recent one posted?
View 3 Replies View RelatedLinksys Wireless Router :: EA6500 Latest Firmware Released
Oct 17, 2012I still don't think the IOT Cable Modem fix did the trick because the EA6500 seems more unstable then it was before.... now every few hours it loses sync with my cable modem and I have to reboot the router for it to function normally.
View 9 Replies View RelatedLinksys Router Befsr41 V3 With Latest Firmware 1.05.00 - Limited Or No Connectivity?
Feb 25, 2011I have a linksys router(befsr41 v3) with the latest firmware(1.05.00) - i have been using it for at least 7 or 8 years now - at one time i had 3 computers hooked up and they all three worked fine. Now i have 2 plugged into the router - both are xppro machines - the one i am on now works with no problems. The other computer however has the limited or no connectivity problem.I used this router for years without any problems then one day this ip conflict message started to appear.
I started getting this ip conflict message on both computers but only occasionaly - it never caused any problems - if you ignored it - it would simply go away.Then one day computer #2 got the limited or no connectivity message - i simple reboot fixed it. This solution worked several times. Computer #1 has never had any problems with the internet connection.Sometime later the limited or no connectivity problem reappeared and this time a reboot did not work - i searched for a fix and decided to try changing the link speed from auto sense to 10mb half duplex - this solved the problem. This solution worked several times.
Sometime after that the limited or no connectivity reappeared and after some searching i upgraded the routers firmware - this solved the problem.Sometime later the limited or no connectivity reappeared and this time i had to actually uninstall the NIC, reboot and then let it redetect the NIC and then the problem was fixed. This solution worked several times.Sometime later (wich brings us to 3 or 4 months ago) the limited or no connectivity reappeared and this time after searching for a fix i was able to fix it by updating the NIC drivers. Problem solved.
This brings us to now - the limited or no connectivity has reappeared and none of the previous fixes correct the problem.When i originally set everything up it worked immediately out of the box.DHCP is enabled - everything is set to obtain an ip address automatically.At first the event viewer on computer #2 reported The IP address lease 192.168.1.100 for the Network Card with network address 0xxxxxxxxx has been denied by the DHCP server 192.168.1.1. {The DHCP Server sent a DHCPNACK message}.
Now the even viewer just tells me it is using ip address 169.254.xxxxxx
I have tried all of the previous fixes to no avail. I've tried shutting everything off and turning everything back on - i've tried resetting both the modem and the router - i've tried upgrading the firmware again. I even downloaded LELA and installed it on both computers thinking maybe it would detect and fix the problem buy no such luck. LELA simply tells me that computer #1 is working normally. On computer #2 when i installed LELA the first thing it did was try to find the router and it tells me it cannot find it.
I tried uninstalling the NIC and removing the drivers, rebooting and then reinstalling them. No luck.
I tried setting a static ip on computer #2 with no luck. When i did these two error messages appeared in the event viewer of computer #1---
The master browser has received a server announcement from the computer (computer #2) that believes that it is the master browser for the domain on transport NetBT_Tcpip_{0876E9A8-C6E. The master browser is stopping or an election is being forced.
The name "MSHOME:1d" could not be registered on the Interface with IP address 192.168.1.100. The machine with the IP address 192.168.1.20 did not allow the name to be claimed by this machine.
If I ping the router from computer #2 it comes back 100% loss.
If I ping the NIC it comes back 0% loss.
I might also add that I can see both computer #1 and #2 in my home network workgroup on both computers. I've tried ipconfig /release and ipconfig /renew - I've tried it one after the other and also a reboot in between. I've tried clicking on repair in the LAN status - I've tried resetting the ip stack with the netsh command - I've even tried different cables and switching ports on the router.
Linksys Wired Router :: BEFSR41 V2 - How To Determine About Latest Firmware
Apr 2, 2011I have the BEFSR41 v2 Router and am trying to determine if I have the latest Firmware vrsion - am having a few connection problems.
View 1 Replies View RelatedLinksys Wireless Router :: E3000 / Cisco Connect Software Download?
Dec 12, 2010I just purchased the E3000. I am trying to set up my laptop with Cisco Connect software but my CD seems to be broken now. Is there anywhere I can download it?
View 9 Replies View RelatedLinksys Wireless Router :: Set Torrent Download To Write Directly To The USB Drive On E3000?
Jan 7, 2011If I try to set a torrent download to write directly to the USB drive on my E3000, it only works for a few minutes (at low speeds) and then I lose access to the drive and the torrent stops. I can access the drive again less than a minute afterwards.
It'd be handy to be able to write torrents straight to the USB drive instead of having to move the completed files to it after the torrent is finished.
Linksys Wireless Router :: E3000 - Possible To Get Any Updated Firmware?
Jan 19, 2012I wonder if an updated firmware for E3000 would come out. Current one have few web-interface issues at QoS, DHCP, Custom Routes and WiFi setup pages.
View 9 Replies View RelatedLinksys Wired Router :: BEFSR81 V2 Ports Become Inactive - Upgraded To Latest Firmware?
Jan 5, 2012I have the Linksys BEFSR V2 router and at least once a day some or one of the ports become inactive and have to unplug the router and plug it back in to reset. I have ungraded to the latest firmware but this is still happening on a daily basis.
View 3 Replies View RelatedLinksys Wired Router :: BEFSR41 V4.3 Latest Firmware - Frequent Internet Drops?
Jan 14, 20112 brand new routers (BEFSR41 v4.3) Firmware - 2.00.4 Build 8, 10-19-2010 - both same problems:Frequent Internet drops, daily resets required.I'm 99.9% sure there's either a defect in this model, or a serious screwup in this firmware.My router uses an IP address, with DHCP off. Also, we have cable modem. Plugging in directly to cable modem works fine.I am an experienced network admin, so refrain from the usual reset / try again response. Have there been many issues with this model and / or firmware? Have there been many returns?
View 2 Replies View RelatedLinksys Wireless Router :: E3000 - Firmware Upgrade Error
Aug 24, 2012I have an E3000 with firmware v. 1.0.01 build 6. I am trying to upgrade to the latest firmware version. I downloaded the file, and when I went to install from the web page I got the error message: Not enough memory available. I tried from 2 computers and got the same message.
View 6 Replies View RelatedLinksys Wireless Router :: E3000 Firmware Upgrade Failure
Sep 14, 2010I was prompted by Cisco Connect to upgrade the router software. During this process it came back and said the update failed. At this time the network connection dropped. The power light is now flashing on the device.
View 9 Replies View RelatedLinksys Wireless Router :: E3000 Original Factory Firmware
Mar 15, 2012I updated my E3000 firmware to Ver. 10.0.4 and did not backup the original firmware. How I can get the original firmware file for this router.
View 3 Replies View RelatedLinksys Wireless Router :: Upgrade Fails For E3000 Firmware 1.0.04
May 25, 2012I have tried repeatedly to upgrade my firmware from 1.0.03 to 1.0.04, but it always fails with a message :cannot upgrade at this time..." I've tried both IE and FireFox, and both wired and wireless connection to my PC (Windows 7).
View 4 Replies View RelatedLinksys Wired Router :: BEFSR41 Router Has Latest Firmware
Feb 7, 2011I have a BEFSR41 that has been flawless to date but it is version 1 (I think). I have gigabit nics on all PCs but I am wondering if the old version 1 is only capable of 10mbps throughput. If that is the case then it may explain why I can get up to 20mbps download speeds off the modem and under 10mbps off the router. The router has the latest firmware and otherwise no problems.
View 2 Replies View RelatedLinksys Wireless Router :: WRT54G Firmware Wants To Download As A .bin?
Mar 4, 2008I was just online when all of a sudden i lost connection. I have a WRT54G V8 and did a quick little browse and found out it could be corrupted firmware. When i download the firmware it wants to download as a .bin file and open VLC Media player!? How do i change this or what do I need to open it with?
View 7 Replies View RelatedLinksys Wireless Router :: E4200V2 Firmware Is Not Available As A Download
Dec 14, 2011V2.0.26.124551 is now available. I did the online upgrade and it took just a couple of minutes including the reboot. The firmware is not available as a download yet for manual install. This firmware is dated 11/14/11 so it doesn't appear to correct the Port 53 issue reported earlier.Release Date: Nov 14, 2011 Firmware version: v2.0.26 (Build 124551) - Support for the WAN L2TP and PPTP protocols
View 1 Replies View RelatedLinksys Wireless Router :: E4200v2 - How To Download 2.0.36 Firmware
Jan 23, 2012Where can I download the 2.0.36 firmware?I flashed it through the UI but since the factiry fw is crap I want to try the third party firmware that are available but I want to make sure there is a path back to factory version in case I need to return the product.
View 1 Replies View RelatedLinksys Wireless Router :: Cannot Download WRT54G V3.1 Firmware
Oct 2, 2011I was playing with the router/gateway settings on my WRT54G v3.1 router.... and I managed to hose it. I tried power cycling/ resetting it will not route my traffic through anymore...although i can still get to the setup menu.I am trying to download the firmware to flash it but.
A) the site says that for this v3.1 router I need to use the ancient firmware 4.21.1 and
B) the link to the firmware does not work !!! it downloads an empty zip file url...
linksys support, if you are listening, please restore the link to the firmware so I can try and fix my router.
Linksys Wireless Router :: Unable To Extract Bin File For E3000 Firmware
Jun 4, 2012PowerArchiver compression sw (newest version) does not recognize the file as valid archive
View 4 Replies View RelatedLinksys Wireless Router :: Slow To Bring Firmware Updates E3000?
Aug 4, 2011Will this router ever see a firmware update so that we can have some additional functionality? The version of Twonky Media server that was bundled with this router was old to begin with, and now we are stuck with it? I tried the E4200 but it just kept spinning my drive that's parked in a ThermalTake BlackX, at least the 3000 doesn't do that, but when can we expect some new firmware, it's been 8 months. I used to love Linksys, but with this kind of support I may have to move to a different brand, and I bet I am not alone. it doesn't break the E3000 like you broke the 4200.
View 1 Replies View RelatedLinksys Wireless Router :: E3000 Firmware 1.0.04 Can No Longer Reach 300 Mbps
Jan 20, 2011I have a laptop with an Intel Centrino 6300 Ultimate-N wireless card. With the previous firmware I was able to reach 300mbps while on the 5GHz band. Since I updated my E3000 to the latest firmware (1.0.04) I can only reach speeds of 144mbps. I have done a factory reset on the router and stll get the same result. Is there any way I can get it to reach 300mbps again with the current firmware?
Also, yes I have uninstalled / updated the driver software for my wireless card. I have also changed the appropriate settings for the 5GHz band. (40MHz channel width, using WPA2 encryption)
Linksys Wireless Router :: E3000 Is Re-flash Simply Downloading And Installing Firmware
Jun 2, 2012I have the latest firmware, have the settings correct (the UPnP is disabled and whatever)
Model number: E3000
Serial number: CVQ01KC13100
Firmware version: 1.0.04 build 6
Operating system: Windows 7 SP 1
Software version: 1.3.11006.1
Connection type (WAN): PPPoE
Went out of town 2 weeks in March, and all through April didn't have any disconnects. Have had this problem since I got it, it gets really bad from time to time (like now). Thought it was my provider for the longest time, but found out if I connect via wired, no disconnects! Is re-flash simply downloading and installing firmware?
Linksys Wireless Router :: E3000 Cannot Connect To Cable Modem After Firmware Upgrade
Aug 28, 2011Upgraded my E3000 from 1.0.02 to 1.0.04 and now I cant get an ip from my arris modem. I did the 30/30/30 reset and everything but no luck. I've had to plug the modem directly into the computer for now. Where can I find the 1.0.02 download or how can I fix this?
View 3 Replies View RelatedLinksys Wireless Router :: Download Source For E4200 V1.0.0 Firmware?
Aug 1, 2011link to the original v1.0.0 firmware for the E4200. That was the best firmware for me and sadly I can't find a link to go back. v1.0.0 really had no problems for me. I initially skipped v1.0.1 becuase it disabled IPv6 which is a feature I want. v1.0.2 broke my YouTube and Netflix streaming. So I went back to v1.0.1 and my Netflix and YouTubue steaming returned to normal but I lost IPv6.
Any solution to Netflix and YouTube streaming problem on v1.0.2 when IPv6 is configured. (I'm positive the video is streaming over IPv4, but the IPv6 connectivity is available.)