what is latest firmware version is for router WRT 160n (v1). The Linksys site currently states that it is Ver.1.02.11 (11/08/10). However, on the admin page for my actual router it states v1.52.0 Nov 16, 2007. These versions #s and dates don't jive. How could I have a supposedly newer version that is older than the most recent one posted?
View 3 RepliesLooking into a firmware upgrade. I have a WRT160N. The label on the back, next to Model Number, simply says WRT160N with no version number. I therefore conclude, per info on the Cisco site, that it is a V1 model, not V2 or V3. And yet the Admin web page for the router says firmware version is 3.0.02. I'm pretty confident I have never upgraded firmware on this router, which means this is how it came out of the box long ago. Latest firmware for V1 is 1.02.11; latest firmware for V3 is 3.0.03.
Should I upgrade to 3.0.03? Is there a way to downgrade to 1.02.11? I'm having some minor issues whch may or may not be the ruter's fault, I figure a firmware upgrade (downgrade?) will at least rule out router firmware issues.
what is the latest firmware version for d-link dir-825? It tell me that i currently got the 2.60VT, is it the last one? If no, where can i download and how the latest version?
View 14 Replies View RelatedWhen you will release the latest version for Wireless router Linksys E2100L?, because I bought a MAC with Lion and I can´t use my Router.
View 4 Replies View RelatedWhere the list of changes for the latest firmware version can be found? My new DIR-655 has firmware from May 2010, and I see the latest and greatest on the DLINK website is from September. But it doesn't state what the changes are, so I'm not sure if I should upgrade or not.
View 8 Replies View RelatedJust purchased a Belkin AC1200 Router Modem and unable to locate the model number what is the current firmware version It is the UK model and I guess it must be very new?
View 4 Replies View RelatedAll of a sudden, my GUI look like this I'm using the latest version of Safari on a MacBook and FW 1.0.04 on the E4200.When I click on one of the menu items the only thing I get is "404 File not found".
View 3 Replies View RelatedI have WRT300N V1.0 with Firmware v1.03.6.what is latest Firmware for WRT300N V1.0 and where I can get it.I tried at Downloads under Support in Cisco website but it said "No firmware/driver download available".
View 1 Replies View RelatedI have a WRT54GS v1 router which is currently loaded with firmware version 2.07.1. I want to upgrade it with the latest firmware. Where I can find the latest firmware download for this model router? Linksys does not have it available on their site.
View 2 Replies View Relatedwhat the latest firmware is for the E3200? The version i'm running at the moment is 1.0.03. Also how do i download the new version?
View 1 Replies View RelatedWhere can I download the latest firmware for my wrt600n?
View 1 Replies View RelatedI still don't think the IOT Cable Modem fix did the trick because the EA6500 seems more unstable then it was before.... now every few hours it loses sync with my cable modem and I have to reboot the router for it to function normally.
View 9 Replies View RelatedDownloading the latest firmware for the E3000. Seems like the link on the page is broken.
View 1 Replies View RelatedI just upgraded to a E3000 from a WRT54G and I am having some issues with network speed.I have no special settings and have even tried restoring factory defaults and upgrading to the latest firmware to no avail.The time I notice the biggest hit is when transferring files locally on the network (WiFi and LAN).Let me note that I do know the difference between MB/s & Mb/s and the like.I have Comcast 20Mb/s Down, 1.5Mb/s Up (just a FYI, the main issue is local transfers)
With default settings my Laptop (ASUS N82JQ, Atheros AR9285 Wireless Network Adapter), connects to the router at only 65Mb/s (with full signal).Upload seems to be more decent ~600KB/s (Transferring files from wireless n laptop to the gigabit desktop).Download seems to be limited to ~150KB/s (Copying files from the wired gigabit desktop to the wireless n laptop).These speeds are horrible! ~5hrs to transfer 3GB of data!
One of my laptops had a card that was capable of both 2.4 & 5Ghz and I was previously getting ~2000-5000KB/s (2-5MB/s) transfers with this router (But I had to do a system restore on it and reset the router). My ASUS laptop seems to only work with 2.4Ghz though. If I change the 2.4Gh Wireless settings on the router to "Auto(20MHz or 40MHz)" the laptop will connect at 150Mb/s, but the speeds are the same slow speeds as above.
My router is the WRT160N, and it doesn't display the version number on the bottom which according to your website means my router is a VERSION 1.SO, why is it that my router says it has:
Firmware Version: v1.53.0 Dec 19, 2007
And the latest firmware is
Firmware 11/08/2010 Ver.1.02.11
That looks like an EARLIER firmware version to me judging by the firmware version yet it is dated later. **bleep**. If you want, I can upload a photo of my router's model no. for all to see.My question is, am I safe to 'upgrade' to this 'earlier but dated later' firmware version or not? Why is mine showing as having a later version.
I had issues with my router incorrectly resolving URLs. For example, going to facebook.com would gtive me a "wiki does not exist" message. Pinging facebook.com would give me an IP that belongs to wikipedia. The answer was SUPPOSED to be upgrading to v3.0.03.I upgraded and now my router WILL NOT connect to my DSL modem. Oh, it says it's connected and shows the correct IP address for my DSL modem but the gateway is showing 0.0.0.0. Direct connection to my PC works just fine.I have cycled the power on both the router and the DSL modem several times. The DSL modem is working just fine. I have done several IP release/renew on the router. I have reset the router. To no avail. This firmware update (which completed successfully) seems to have killed my routers ability to communitcate with the internet.
View 4 Replies View RelatedWhere can I find revision 8 of the WRT160N version 2 firmware?
View 8 Replies View Related(F5D9230-4 v5111 Belkin mimo router ) is version 5.02.08 the most up to date firmware for my router?
View 1 Replies View RelatedI have a linksys router(befsr41 v3) with the latest firmware(1.05.00) - i have been using it for at least 7 or 8 years now - at one time i had 3 computers hooked up and they all three worked fine. Now i have 2 plugged into the router - both are xppro machines - the one i am on now works with no problems. The other computer however has the limited or no connectivity problem.I used this router for years without any problems then one day this ip conflict message started to appear.
I started getting this ip conflict message on both computers but only occasionaly - it never caused any problems - if you ignored it - it would simply go away.Then one day computer #2 got the limited or no connectivity message - i simple reboot fixed it. This solution worked several times. Computer #1 has never had any problems with the internet connection.Sometime later the limited or no connectivity problem reappeared and this time a reboot did not work - i searched for a fix and decided to try changing the link speed from auto sense to 10mb half duplex - this solved the problem. This solution worked several times.
Sometime after that the limited or no connectivity reappeared and after some searching i upgraded the routers firmware - this solved the problem.Sometime later the limited or no connectivity reappeared and this time i had to actually uninstall the NIC, reboot and then let it redetect the NIC and then the problem was fixed. This solution worked several times.Sometime later (wich brings us to 3 or 4 months ago) the limited or no connectivity reappeared and this time after searching for a fix i was able to fix it by updating the NIC drivers. Problem solved.
This brings us to now - the limited or no connectivity has reappeared and none of the previous fixes correct the problem.When i originally set everything up it worked immediately out of the box.DHCP is enabled - everything is set to obtain an ip address automatically.At first the event viewer on computer #2 reported The IP address lease 192.168.1.100 for the Network Card with network address 0xxxxxxxxx has been denied by the DHCP server 192.168.1.1. {The DHCP Server sent a DHCPNACK message}.
Now the even viewer just tells me it is using ip address 169.254.xxxxxx
I have tried all of the previous fixes to no avail. I've tried shutting everything off and turning everything back on - i've tried resetting both the modem and the router - i've tried upgrading the firmware again. I even downloaded LELA and installed it on both computers thinking maybe it would detect and fix the problem buy no such luck. LELA simply tells me that computer #1 is working normally. On computer #2 when i installed LELA the first thing it did was try to find the router and it tells me it cannot find it.
I tried uninstalling the NIC and removing the drivers, rebooting and then reinstalling them. No luck.
I tried setting a static ip on computer #2 with no luck. When i did these two error messages appeared in the event viewer of computer #1---
The master browser has received a server announcement from the computer (computer #2) that believes that it is the master browser for the domain on transport NetBT_Tcpip_{0876E9A8-C6E. The master browser is stopping or an election is being forced.
The name "MSHOME:1d" could not be registered on the Interface with IP address 192.168.1.100. The machine with the IP address 192.168.1.20 did not allow the name to be claimed by this machine.
If I ping the router from computer #2 it comes back 100% loss.
If I ping the NIC it comes back 0% loss.
I might also add that I can see both computer #1 and #2 in my home network workgroup on both computers. I've tried ipconfig /release and ipconfig /renew - I've tried it one after the other and also a reboot in between. I've tried clicking on repair in the LAN status - I've tried resetting the ip stack with the netsh command - I've even tried different cables and switching ports on the router.
I am going to this page: [URL] but I can see nothing regarding firmware. The "Download software" link takes me to a page that has QVPN, TFTP utilities, etc, but no firmware.
View 4 Replies View RelatedI have the BEFSR41 v2 Router and am trying to determine if I have the latest Firmware vrsion - am having a few connection problems.
View 1 Replies View RelatedI recently updated the firmware in my WRT160N V3.Ever since, the wireless signal is intermittent.It worked all day yesterday, and now today it doesn't connect at all.I can't remember exactly the settings I used to have before updating the firmware, should have written them down.From looking at articles on this site, I have the following settings:
MTU Manual 1492
MAC Adress enabled
Network Mode: Mixed
Channel Width 20MHz
Channel: 11
[code].....
I have the Linksys BEFSR V2 router and at least once a day some or one of the ports become inactive and have to unplug the router and plug it back in to reset. I have ungraded to the latest firmware but this is still happening on a daily basis.
View 3 Replies View Related2 brand new routers (BEFSR41 v4.3) Firmware - 2.00.4 Build 8, 10-19-2010 - both same problems:Frequent Internet drops, daily resets required.I'm 99.9% sure there's either a defect in this model, or a serious screwup in this firmware.My router uses an IP address, with DHCP off. Also, we have cable modem. Plugging in directly to cable modem works fine.I am an experienced network admin, so refrain from the usual reset / try again response. Have there been many issues with this model and / or firmware? Have there been many returns?
View 2 Replies View RelatedI updated the fimware on my WRT160N v3 and followed it up with a reset of the router. I then restored the router settings that I had saved. All the settings appeared to be good, but none of my wireless devices would connect. I reneted the pass phrases (WPA2) but still nothing. Tried to change the passphrase, still no good. I then did a factory reset of the router from the setiings page and manually re-entered and save the settings, again nothing. All of my devices are able to "see" the network and the correct SSID.
View 9 Replies View RelatedI was having problems with the speed being between 30-58 kpbs when going through the WRT160N router, whether its hooked up wired or wireless, the speed with both was extremely slow and wouldnt fully open pager or would take dsl day slow. I hooked up straight to modem and I got 100+ kpbs so I figured its not my ISP, so I read that upgrading my firmware might make it faster, so I upgraded and hit and held the reset button for 30 secs like it recommended but now the 192.168.1.1 wont open, I get a message saying it cant open this page
View 4 Replies View RelatedI have a BEFSR41 that has been flawless to date but it is version 1 (I think). I have gigabit nics on all PCs but I am wondering if the old version 1 is only capable of 10mbps throughput. If that is the case then it may explain why I can get up to 20mbps download speeds off the modem and under 10mbps off the router. The router has the latest firmware and otherwise no problems.
View 2 Replies View RelatedI need to reflash a WRT54G version 2, but on the support page I can not find any firmware. Only for version 2.2. is it the compatible also with version 2?
View 2 Replies View RelatedI own the linksys wrt160n v2...It has latest firmware 2.03 build 9...After installing this firmware i have noticed the internet speeds have reduced,the router requires frequent reboots to make it stable..
i used to have firmware version 2.02 build 15...It was stable unlike the current firmware...i cant find the old firmware anywhere...how do i revert back to old firmware?
All settings are currently at default.
Is there any firmware update for this product? I'm not hable to find it... Product: WRT54GC Version 2.0 (wwith external anthena)
View 9 Replies View RelatedIt appears that there is no firmware I can download for my WRT54GL Version 1.1. While it may never have been updated from what the router came with from the factory, it would still be useful to have it available. In my case, I would like to revert the router from the DD-WRT firmware to factory specs.
View 3 Replies View RelatedI am needing to update the firmware for my router. befw1154 version 4. I went to the download section of the linksys website, and it does show that there is an update there, but I have read in alot of places that the update downloads are in a zip file. WEll it definately wasnt in a zip file, and all it did was download a strange file and there was nothing to install or anything. My router is still on the blitz, and going down every few minutes and I am having to restart just to have it go down again. firmware update for this router?
View 1 Replies View RelatedI purchased a WRT160N router last Friday. After setting it up, everything seemed to work fine, but after a couple of hours, the router stopped responding to any requests. The LEDs stayed on as if nothing had happened, but the router was dropping everything coming from both the WAN and a wired LAN interface. Since than, I had to restart it 3 times during the last 3 days.The firmware is 1.53.0, which seems to be the latest firmware for the European market - even when I try to get a newer firmware, this site only offers the US version 1.02.2.Should I update the firmware to the US version 1.02.2 ? Is there any difference between the 1.53.0 and the 1.02.2 version ? Is there a way to restore the original firmware in case the update fails ? I haven't found any link to 1.53.0 version..Also, does this firmware updating affect my warranty ?
View 9 Replies View Related