Linksys Wireless Router :: Slow To Bring Firmware Updates E3000?

Aug 4, 2011

Will this router ever see a firmware update so that we can have some additional functionality? The version of Twonky Media server that was bundled with this router was old to begin with, and now we are stuck with it? I tried the E4200 but it just kept spinning my drive that's parked in a ThermalTake BlackX, at least the 3000 doesn't do that, but when can we expect some new firmware, it's been 8 months. I used to love Linksys, but with this kind of support I may have to move to a different brand, and I bet I am not alone. it doesn't break the E3000 like you broke the 4200.

View 1 Replies


ADVERTISEMENT

Linksys Wired Router :: RVO82 Firmware Updates Not Being Applied?

Feb 12, 2011

I'm havoing probems with my network "stuttering" and wanted to update the firmware. The RVO82 is currently running v2.0.0.19-tm and I have downloaded the latest; V 4.0.0.0.07-tm and tried to upload it to the router using both Safari and Firefox but the update won't take. I have followed the instructions to go to a fixed ip of 192..168.1.50 and have a connection directly to the router( bypassing the switch) but cannot get it to update.

View 1 Replies View Related

Linksys Wireless Router :: E3000 - Possible To Get Any Updated Firmware?

Jan 19, 2012

I wonder if an updated firmware for E3000 would come out. Current one have few web-interface issues at QoS, DHCP, Custom Routes and WiFi setup pages.

View 9 Replies View Related

Linksys Wireless Router :: E3000 Gets Slow After A While

Feb 17, 2011

It seems like after a certain amount of time, maybe a few days... my E3000 gets slowww.. I'm talking dog slow.  And it's not just the internet, I have a media server connected to it, and usually when I put something on it, the transfer rate is about 3.5MB/s (not bits, bytes).  But everything is slow, I top out at speed of maybe 1/6 normal on the internet as well.

View 8 Replies View Related

Linksys Wireless Router :: E3000 - Firmware Upgrade Error

Aug 24, 2012

I have an E3000 with firmware v. 1.0.01 build 6.  I am trying to upgrade to the latest firmware version.  I downloaded the file, and when I went to install from the web page I got the error message:  Not enough memory available. I tried from 2 computers and got the same message. 

View 6 Replies View Related

Linksys Wireless Router :: E3000 Firmware Upgrade Failure

Sep 14, 2010

I was prompted by Cisco Connect to upgrade the router software.  During this process it came back and said the update failed.  At this time the network connection dropped.  The power light is now flashing on the device. 

View 9 Replies View Related

Linksys Wireless Router :: E3000 Original Factory Firmware

Mar 15, 2012

I  updated my E3000  firmware to Ver. 10.0.4 and did not backup the original firmware. How I can get the original firmware file for this router.

View 3 Replies View Related

Linksys Wireless Router :: Upgrade Fails For E3000 Firmware 1.0.04

May 25, 2012

I have tried repeatedly to upgrade my firmware from 1.0.03 to 1.0.04, but it always fails with a message :cannot upgrade at this time..."  I've tried both IE and FireFox, and both wired and wireless connection to my PC (Windows 7).

View 4 Replies View Related

Linksys E3000 Wireless-N Router Slow Speed?

Feb 25, 2011

I have FiOS and their supplied wireless router Actiontec #MI424WR. I have home theater equipment that uses the newer N signal so I purchased a Linksys E3000 Wireless-N Router. I have one of the LAN outputs on the Actiontec feeding the Linksys input and Wi-Fi turned off on the Actiontec. This is working good for my wireless home theater equipment but I am having problems with my wired speed. It has gone from averaging anywhere from 20 to 30 mbps on numerous test sites when plugged into the Actiontec to averaging around 10 mbps when plugged into the Linksys.

1) Is my wireless N speed going to top out at 10mbps or less since that is all the router is showing on wired? Shouldn�t N be broadcasting a faster speed if given the ability?

2) I have my computer currently plugged directly into the Linksys verses the Actiontec. This makes it easier to program the Linksys router. Since I am no longer using the wireless part of the Actiontec there really is no need to be plugged into it. Is there anything I can do get the speed higher on the Linksys, a setting I can change? Will I have to plug the computer back into the Actiontec to get the higher speed and then move it every time I may need to make a change to the Linksys?

View 2 Replies View Related

Linksys Wireless Router :: Unable To Extract Bin File For E3000 Firmware

Jun 4, 2012

PowerArchiver compression sw (newest version) does not recognize the file as valid archive

View 4 Replies View Related

Linksys Wireless Router :: Cannot Download Latest Firmware For E3000 Webpage

Aug 25, 2011

Downloading the latest firmware for the E3000. Seems like the link on the page is broken.

View 1 Replies View Related

Linksys Wireless Router :: E3000 Firmware 1.0.04 Can No Longer Reach 300 Mbps

Jan 20, 2011

I have a laptop with an Intel Centrino 6300 Ultimate-N wireless card. With the previous firmware I was able to reach 300mbps while on the 5GHz band. Since I updated my E3000 to the latest firmware (1.0.04) I can only reach speeds of 144mbps. I have done a factory reset on the router and stll get the same result. Is there any way I can get it to reach 300mbps again with the current firmware?
 
Also, yes I have uninstalled / updated the driver software for my wireless card. I have also changed the appropriate settings for the 5GHz band. (40MHz channel width, using WPA2 encryption)

View 9 Replies View Related

Linksys Wireless Router :: E3000 Cause Internet Speed To Slow Down

Jan 19, 2013

I came home yesterday and my Internet was really slow. I later found out that it was due to my Linksys E3000 because if I bypass my E3000 and go directly to my cable modem, it work just fine.I tried reconfigure, update firmware, factory reset and none of these has worked.

View 8 Replies View Related

Linksys Wireless Router :: E3000 Is Re-flash Simply Downloading And Installing Firmware

Jun 2, 2012

I have the latest firmware, have the settings correct (the UPnP is disabled and whatever)

Model number: E3000
Serial number: CVQ01KC13100
Firmware version: 1.0.04 build 6
Operating system: Windows 7 SP 1
Software version: 1.3.11006.1
Connection type (WAN): PPPoE
 
Went out of town 2 weeks in March, and all through April didn't have any disconnects. Have had this problem since I got it, it gets really bad from time to time (like now).  Thought it was my provider for the longest time, but found out if I connect via wired, no disconnects!  Is re-flash simply downloading and installing firmware?

View 6 Replies View Related

Linksys Wireless Router :: E3000 Cannot Connect To Cable Modem After Firmware Upgrade

Aug 28, 2011

Upgraded my E3000 from 1.0.02 to 1.0.04 and now I cant get an ip from my arris modem. I did the 30/30/30 reset and everything but no luck. I've had to plug the modem directly into the computer for now. Where can I find the 1.0.02 download or how can I fix this?

View 3 Replies View Related

Linksys Wireless Router :: E3000 Has Slow Ethernet Speed But Internet Ok

Jun 14, 2012

My Cisco E3000 has slowed it's Ethernet speed so slow that it times out when going to Facebook, YouTube or any site that is complex. It worked fine until one day it just gave up. It's connected to DSL Modem with Ethernet To a Apple Mac G5 power PC There are two other older macs connected via Ethernet, same problem. When I took the router out of the chain, and connected G5 directly to modem, normal internet speed. My firmware is up to date. Both wireless bands work great. When I look at Cisco Connect, everything looks normal. factory settings.

View 7 Replies View Related

Linksys Wireless Router :: E3000 Extremely Slow Menu Access?

Feb 29, 2012

I just purchased an E-3000 and when I log into the user interface it seems changing pages and saving settings takes forever. I click on a section in the router menu and it takes what seems like 30 seconds for the page to change or accept the new settings. It's not my browser it's definitely a Linksys Router issue. I updated to the latest firmware and latest Cisco Connect software as well. Is this slow user interface a normal thing with these routers?

View 1 Replies View Related

Linksys Wireless Router :: E3000 Slow Network Transfer Speeds Over N

Jul 11, 2011

I'm having very slow file transfer speeds between the 2 computers on my network. One is a gigabit pc wired (cat6) to the e3000. The other is a wireless N laptop. Both computers running Win7. Speeds are like 1.5 - 2 MB/s. when I connect the laptop to the router with a cable (cat6) I get proper high speed. Trying to figure out if it's a problem with the router or windows or what. Speedtest.net says I'm getting 16 MB/s DL wirelessly to my laptop. Shouldn't wireless N be capable of higher speeds than 1.5 MB/s?? Tests are done approx 10 feet from the router.

View 1 Replies View Related

Linksys Wireless Router :: E3000 Restoring Factory Defaults / Upgrading To Latest Firmware

Sep 16, 2010

I just upgraded to a E3000 from a WRT54G and I am having some issues with network speed.I have no special settings and have even tried restoring factory defaults and upgrading to the latest firmware to no avail.The time I notice the biggest hit is when transferring files locally on the network (WiFi and LAN).Let me note that I do know the difference between MB/s & Mb/s and the like.I have Comcast 20Mb/s Down, 1.5Mb/s Up (just a FYI, the main issue is local transfers)
 
With default settings my Laptop (ASUS N82JQ, Atheros AR9285 Wireless Network Adapter), connects to the router at only 65Mb/s (with full signal).Upload seems to be more decent ~600KB/s (Transferring files from wireless n laptop to the gigabit desktop).Download seems to be limited to ~150KB/s (Copying files from the wired gigabit desktop to the wireless n laptop).These speeds are horrible! ~5hrs to transfer 3GB of data!
 
One of my laptops had a card that was capable of both 2.4 & 5Ghz and I was previously getting ~2000-5000KB/s (2-5MB/s) transfers with this router (But I had to do a system restore on it and reset the router). My ASUS laptop seems to only work with 2.4Ghz though. If I change the 2.4Gh Wireless settings on the router to "Auto(20MHz or 40MHz)" the laptop will connect at 150Mb/s, but the speeds are the same slow speeds as above.

View 9 Replies View Related

TP-Link 300Mbps Wireless :: Firmware Updates For WR841N?

Dec 31, 2012

Region : UnitedStates
Model : TL-WR841N
Hardware Version : V7
Firmware Version : 3.11.7 Build 100531 Rel. 72021n
ISP :

We received new tablet and smart tv but cannot use them due to connection problems. The tv will not connect to the router and the tablet shows strong router strength but will not connect to the internet. I checked for firmware updates and there are 3. Do I simply install the latest firmware or all 3?

View 1 Replies View Related

Cisco Wireless :: RV180W Downloads (Firmware Updates)

Feb 7, 2013

I've just bought a Cisco RV180W and I am trying to find its newest firmware but I am getting 404 everytime I access or search for this updates.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 - Firmware Updates Overwritten Configuration

Apr 17, 2013

Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : TD-W8968_V1_130217

Having just updated the firmware I was surprised that it overwrote my configuration (WAN LAN & WiFi) settings.Is this normal for TP-Link firmware updates ?

View 3 Replies View Related

D-Link DIR-655 :: How To Update Firmware And Bring Up All Necessary Tools

Sep 1, 2012

Today i has tryed to update the firmware of my DIR-655 router, but in the screen under the administrative tools menu there is nothing to use.

how do I update the firmware and bring up all the necessary tools?Dir-655 works because they are connected to the internet and manages the wireless network.

View 2 Replies View Related

D-Link DIR-825 :: Slow To Bring Up Settings Pages

Dec 26, 2011

I'm using a Dell computer CPU i7 8 gig of ram. It is wired in to the router. Why does it take so long to log into the router and bring up the different pages in the settings. I have never seen a router take so long. I have not updated the firmware version 2.02NA. I have not upgraded it yet. oh I have a cable connection. When I surf the web the pages come-up fast.

View 13 Replies View Related

Linksys Wireless Router :: E1500 When Swipe Screen And Bring Them Back / Wifi Is Not Connected

Apr 8, 2012

I installed this Linksys E1500 yesterday and have had a problem keeping my iPhone 4 and an iPod Touch connected to WiFi.The devices go to sleep.  When I swipe the screen and "bring them back" the WiFi is Not Connected.  I have to go in and re-enter my network password again.  As long as the devices don't go to sleep, they maintain connectivity.  Once connected they function properly.
 
The iPad 2 & Samsung Galaxy S phone we have seem to be keeping their WiFi connectivity, as well as a G62 HP laptop running Windows 7, an older XP machine using a Cisco AE1000 wireless network adaptor and the Xbox 360.  The issue is just with the iPhone 4(ios 5) and the iPod Touch(ios 4).
 
I had issues with the iPad and the Galaxy phone until i disabled WMM Support in App & Gaming.I would bring this back to the retailer but I had it sitting on my desk for about 30 days and it's past their return policy.The firmware is up to date on the Router.  I've tried power cycling all the devices including the cable modem & the new router.

View 1 Replies View Related

D-Link :: DIR 825 - Firmware Updates And Configuration

Apr 4, 2011

Just bought three D-Links from abroad ( Canada) and now am in Mauritius. They are brand new and now going to set them up.

1) DIR-825 H/W : B1 F/W : 2.02NA
2) DNS-323 H/W : C1 F/W : 1.09
3) DWA-140 H/w : B2 F/H : 1.50

I already own a Beetel 220BX2 modem. I will be connecting :
1) my PC through the DWA-140
2) three Samsung Galaxy S
3) One LG phone (b/g)
4) Network Player (Yet to be bought)
5) Laptop

What are the steps to follow (Firmware updates, Configurations). I was planning to do VPN and to have each device have its own IP.

View 14 Replies View Related

Cisco Firewall :: Getting ASA 5505 Firmware Updates?

Jun 19, 2011

We are a relatively new Cisco partner. We used to work with CDW and now we are buying from distribution and selling directly. We buy a lot of ASA 5505 units from D&H.
 
My question is, aside from the disc that comes with the unit where do we download the latest firmware image and management software? It appears you have to have a contract ID to get these through the Cisco website. Do we not get "car blanche" access as a Cisco partner to these resources?
 
Also doesn't the Cisco ASA 5505 at least come with a license for the latest firmware? Many ship with very old software and even old CDROMs.

View 2 Replies View Related

Slow Wi-Fi N On Linksys E3000?

Aug 16, 2011

LAN on my Linksys E3000 is very fast but wifi N is slow. copying a 4GB file from WLAN (Intel Wifi 1000) to LAN is about 5MBps, using 2.4GHz and disabling UPnP. reset and reboot do not work.

View 2 Replies View Related

Routers / Switches :: Actiontek PK5000 - No Updates For The Firmware Available?

Jun 6, 2011

I have an Actiontek pk5000, and it disconnects wifi every few minutes, I have this computer hooked to ethernet, and it still works, but my macs, and tablets won't connect wirelessly I have rebooted the modem 6 times now, and I get about 5 minutes of internet every time I reboot. I have tried to upgrade the firmware on it, but it says there are no updates for the firmware available for the router.

View 3 Replies View Related

Linksys Wireless Router :: E1200 - Get Notifications When External Ip Changes And Updates Dyndns?

Jun 28, 2012

Is there a way to get notifications (emails) when the external ip changes and the rotuer updates dyndns?i need to get an email about this change of ip. The only constraint is it has to work without a computer attached to the router as it would have to be powered on 24/7 So ip change notifiers like trueip or  ipcheck won't work as they are programs that run in a computer.

View 9 Replies View Related

Belkin Routers :: Newer Firmware Updates For The N300 (F9K1002v2)?

May 25, 2013

I have an N300 (F9K1002v2) and I'd like to know if there are any firmware updates newer than 2.00.08, I've tried flashing firmwares 3, 4, and 5 but they all fail.

View 1 Replies View Related

Linksys E3000 - Reconfigure Settings After Firmware Update?

Feb 4, 2013

I have a Linksys E3000 router, which originally had all sorts of security settings, and names for the wireless networks, etc. It was all set up. I upgraded the firmware, and all of those settings sent away. Is there a way to reconfigure the settings to get them back to how they were, and if so, how do I do it?

View 2 Replies View Related

Slow Connection Between Linksys E3000 And Atheros AR9825?

Aug 28, 2011

Operated 802.11N connection between Linksys E3000 and Atheros AR9825 at 150Mkbs? Can't get faster than 65Mkbs. AR9825 is in Sony Vaio laptop, have used multiple drivers that produce maximum of either 54 or 65 Mkbs. E3000 has current firmware (1.04). AR9825 uses only 2.4Ghz frequency, claims max speed of 150 Mkbs. Running Windows 7 SP1.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved