Routers / Switches :: Actiontek PK5000 - No Updates For The Firmware Available?
Jun 6, 2011
I have an Actiontek pk5000, and it disconnects wifi every few minutes, I have this computer hooked to ethernet, and it still works, but my macs, and tablets won't connect wirelessly I have rebooted the modem 6 times now, and I get about 5 minutes of internet every time I reboot. I have tried to upgrade the firmware on it, but it says there are no updates for the firmware available for the router.
Ok, my roomate is hogging the bandwidth on our shared router downloading junk. I'm not sure if he's using a torrent, but just in case he is here is my question:How do I turn off the ports for torrenting on my qwest pk5000 modem? Is there anything else I can do that would work as well?My friend reccommended I turn off every port after 9000 or something.
I have an N300 (F9K1002v2) and I'd like to know if there are any firmware updates newer than 2.00.08, I've tried flashing firmwares 3, 4, and 5 but they all fail.
I already own a Beetel 220BX2 modem. I will be connecting : 1) my PC through the DWA-140 2) three Samsung Galaxy S 3) One LG phone (b/g) 4) Network Player (Yet to be bought) 5) Laptop
What are the steps to follow (Firmware updates, Configurations). I was planning to do VPN and to have each device have its own IP.
We are a relatively new Cisco partner. We used to work with CDW and now we are buying from distribution and selling directly. We buy a lot of ASA 5505 units from D&H.
My question is, aside from the disc that comes with the unit where do we download the latest firmware image and management software? It appears you have to have a contract ID to get these through the Cisco website. Do we not get "car blanche" access as a Cisco partner to these resources?
Also doesn't the Cisco ASA 5505 at least come with a license for the latest firmware? Many ship with very old software and even old CDROMs.
Region : UnitedStates Model : TL-WR841N Hardware Version : V7 Firmware Version : 3.11.7 Build 100531 Rel. 72021n ISP :
We received new tablet and smart tv but cannot use them due to connection problems. The tv will not connect to the router and the tablet shows strong router strength but will not connect to the internet. I checked for firmware updates and there are 3. Do I simply install the latest firmware or all 3?
I'm havoing probems with my network "stuttering" and wanted to update the firmware. The RVO82 is currently running v2.0.0.19-tm and I have downloaded the latest; V 4.0.0.0.07-tm and tried to upload it to the router using both Safari and Firefox but the update won't take. I have followed the instructions to go to a fixed ip of 192..168.1.50 and have a connection directly to the router( bypassing the switch) but cannot get it to update.
Region : UnitedKingdom Model : TD-W8968 Hardware Version : V1 Firmware Version : TD-W8968_V1_130217
Having just updated the firmware I was surprised that it overwrote my configuration (WAN LAN & WiFi) settings.Is this normal for TP-Link firmware updates ?
Will this router ever see a firmware update so that we can have some additional functionality? The version of Twonky Media server that was bundled with this router was old to begin with, and now we are stuck with it? I tried the E4200 but it just kept spinning my drive that's parked in a ThermalTake BlackX, at least the 3000 doesn't do that, but when can we expect some new firmware, it's been 8 months. I used to love Linksys, but with this kind of support I may have to move to a different brand, and I bet I am not alone. it doesn't break the E3000 like you broke the 4200.
We have currently LMS 3.2 installed. We know have some new switches C2960-48PST-L that are not supported in CiscoView and Common Services.When trying an update in Software Center | Device Update, we receive an error message:Error while downloading package information from Cisco.com for the selected products. See the C:/PROGRA~1/CSCOpx/log/psu.log file for details.
The psu.log file shows the following: [ Wed Sep 26 14:33:15 CEST 2012 ] INFO [SecurityHandler : getCSProxyLogin] : No proxy User Name configured [ Wed Sep 26 14:33:15 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured [ Wed Sep 26 14:33:24 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured [ Wed Sep 26 14:33:24 CEST 2012 ] INFO [SecurityHandler : getCSProxyPort] : No proxy port confgured [ Wed Sep 26 14:33:26 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured [ Wed Sep 26 14:33:26 CEST 2012 ] INFO [SecurityHandler : getCSProxyPort] : No proxy port confgured
I have Prime 1.3, two WLC 5508 and 8 switches 2960s I try update my devices through Prime, but I can't.
When I start "Upgrade Analysis" and select switch (Catalyst WS-C2960S-24PS-L) and image (c2960s-universalk9-mz.150-2.SE2.bin) then click to "Run report"
Prime shows me that "Image not Applicable for this Device" I try different images, but it does not work.
And with WLC 5508 the same trouble. Why Prime can't do right analysis and updates devices?
We have the RVS4000 and have IPS turned on. How can I be notified (email would work) when updates to the IPS signatures are available, so I can keep our IPS signatures current?
#1: I have an N300 router and all of my devices (two laptops, one PS3, and one 3DS) connect to the internet just fine. But I'm having a problem when trying to connect to a friend on my 3DS when playing Pokemon Black Version 2. I've never had this problem before I got my N300 router. The 3DS connects to the internet without issue to download updates and shop the Nintendo store, but this in-game connection is not working.
#2: When I started using that same N300 router, suddenly my access to www.omegle.com was severely limited. It's a video chat site on which now I can no longer see the other users' video. Rarely a video will come through, by 90% of the time I just get black screens which I know I shouldn't be getting.
I've recently switched to a Verizon hotspot. For additional range while I'm at home, can I configure my Actiontec PK 5000 as a repeater for the hotspot signal?
Why do I have to reboot my Actiontec gateway 7 or 8 times a day? Is this normal now days with any of the DSL services? I have Century link New computer.
After reading posts in this forum and others, and reviewing MSFT tech docs, I'm still not able to establish file sharing between the wired PC and the wireless-connected laptop. Maybe I'm working under some stupid assumptions. I am able to ping each computer by their IP address - I can ping the laptop from the desktop, and vice versa. The desktop shows the Basecomputer under network places, but on the laptop, nothing at all shows up under network places. Laptop missing something?
The details: a) Connecting to internet via DSL, Qwest ISP, Actiontec PK5000 Advanced Networking Network Router. Advanced Networking router, to me, means that home networking shouldn't require any other hardware. Stupid assumption?
b) Desktop PC is connected to the modem/router via ethernet cable
c) Laptop is connected to the modem/router via wireless, (Dell Wireless WLAN 1350 WLAN Mini PCI Card). Assocation tab of the wireless properties gives the network authentication/data encryption types as Open/WEP.
d) Some settings of the modem, viewed via the browser (192.168.0.x) - Wireless security type: WPA - MAC authentication Enabled - Firewall security level: Off (NAT only)
e) Desktop PC is Windows XP Home Edition, SP 3
f) Laptop is Windows XP Professional Version 2002, SP3
g) Both are running Windows Firewall; File and Printer Sharing is checked for both, under the Exceptions tabl
h) I ran the Network setup wizard for both, using same Workgroup name, called HOME. Desktop is called BASECOMPUTER, and Laptop is called LAPTOP. No errors in the setup. On the desktop PC, under Windows Explorer, Network Places -> Entire Network, I can see a 'Home' network under a Microsoft Windows Network icon, with the Basecomputer listed. However, LAPTOP is not listed. This is after a couple of restarts.
I ran a cat5 from my house which has the dsl modem to my workshop; about 120ft.I can plug that cable into my pc and get internet. But if I plug the cable into the Linksys, and the a cable from the Linksys to the pc, no internet connection. How to configure the Linksys so that I can connect it to my PC? I also want to connect my Verizon wireless Network extender to the Linksys.T
I have tried to update the firmware of my srw2016 but after this update my switch wouldn't start again.
It shows this message in my console: Exit from boot menu. Continue with flow. Preparing to decompress... Image in address: 0x0 - Check Sum error! Please download a new image. Downloading code using XMODEM.
I have just received a Cisco SF 200E-24P switch and need to upgrade the firmware. The current version is 1.0.0.12 an need to load the latest (or at least 1.1) to get CDP etc. However when I use the upgrade option in the switch I get an error of.Firmware Image download through HTTP failed. Wrong File Type.I have tried 3 different versions of the firmware and get the same error message each time.
I have downloaded the new firmware for the SG500. I see there are two files included in the download, a boot file (rfb) and regular firmware image (ros). I have looked and haven't seen anything about the rfb files. I know it is a boot file, but do not know if I should update the boot file first and then the firmware image or vice versa. Also, in my update screen on the SG500, the boot file option is greyed out.
We have Sg-300-28 serious switches(SRW-2024 k9-EU) and i want to upgrade switch with latest firmware, any info for latest firmware is used for the same ?
We just purchased this device and was curious if the firmware 3.0.2.0 or 3.0.1.0 has the CLI functionality like the Sx300 models with 1.1.2.0. I find it easier to configure via CLI then the WebUI.
