Cisco :: WLC 5508 - Prime 1.3 Can't Updates Switches
Feb 20, 2013
I have Prime 1.3, two WLC 5508 and 8 switches 2960s I try update my devices through Prime, but I can't.
When I start "Upgrade Analysis" and select switch (Catalyst WS-C2960S-24PS-L) and image (c2960s-universalk9-mz.150-2.SE2.bin) then click to "Run report"
Prime shows me that "Image not Applicable for this Device" I try different images, but it does not work.
And with WLC 5508 the same trouble. Why Prime can't do right analysis and updates devices?
We have currently LMS 3.2 installed. We know have some new switches C2960-48PST-L that are not supported in CiscoView and Common Services.When trying an update in Software Center | Device Update, we receive an error message:Error while downloading package information from Cisco.com for the selected products. See the C:/PROGRA~1/CSCOpx/log/psu.log file for details.
The psu.log file shows the following: [ Wed Sep 26 14:33:15 CEST 2012 ] INFO [SecurityHandler : getCSProxyLogin] : No proxy User Name configured [ Wed Sep 26 14:33:15 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured [ Wed Sep 26 14:33:24 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured [ Wed Sep 26 14:33:24 CEST 2012 ] INFO [SecurityHandler : getCSProxyPort] : No proxy port confgured [ Wed Sep 26 14:33:26 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured [ Wed Sep 26 14:33:26 CEST 2012 ] INFO [SecurityHandler : getCSProxyPort] : No proxy port confgured
I have an Actiontek pk5000, and it disconnects wifi every few minutes, I have this computer hooked to ethernet, and it still works, but my macs, and tablets won't connect wirelessly I have rebooted the modem 6 times now, and I get about 5 minutes of internet every time I reboot. I have tried to upgrade the firmware on it, but it says there are no updates for the firmware available for the router.
I have newly deployed a Prime Infrastructure (PI) in my network, and i want to add my wirless controller in it. I get an error SNMP time out whenever i add my controller to PI through SNMP.
There are default SNMP configurations in the controller and i am simply adding them in PI with their private/public SNMP string.
WLC 5508 is connected to my core switch and PI is connected to another switch which is directly connected to core switch via Layer 3.
Is there any configuration required to be done on the switch side.?
We are going to implement high availabilty in 5508 WLC with version of 7.3.101 . We will be using Prime infrastructure 1.2 for monitoring purpose.With Prime, whether we can monitor and manage redundant WLC also or only active WLC?.
I am looking for a "no marketing babble" explanation of what exactly Cisco Prime Infrastructure does, that the built in 5508 Wifi administration console and Cisco Network Assitant does not do.I already use the "Cisco UC560 Configuration Assistant", the "Cisco Network Assistant" for our switches, and the "Wifi 5508 web admin console", and I am fine with that.At another site where I work, that is now going with Cisco Wifi, it is suggested that "Cisco Prime Infrastructure" be purchased.Is it important to me to have a "single pane of glass" view of the entire network? NO IT IS NOT.
All this marketing babble about having everything converged and accessible for mobile BYOD users. Yeah, that's great, but what is Cisco Prime Infrastructure actually going to do about all the mobile wifi devices coming in to the network that MUST use a web proxy to get out of our network? Many don't deal with proxy.pac correctly or don't read it at all, unless that function is explicitly turned on, by the individual device owner, in an often hidden location in their device settings. I am mainly looking at the $3000 a year price for Prime Infrastructure and going, no way, the Cisco Network Assistant and 5508 Wifi web console that are thrown in for free with the new hardware is fine with me.
I'm looking for getting a Cisco prime NCS appliance (PRIME-NCS-APL-K9). I'm a little bit confused regarding to the license scheme:
1. Does the appliance has any license coming with it or we need to order the license separately? 2. If I have an WLC 5508 (license support 12 APs) & 12 3500 APs, then number of devices counted will be 1 (WLC) or 12 (APs) or 13 (WLC + APs) ?
We are currently running WCS but have built a new Prime Infrastructure 1.3 system from scratch on a brand new server, we have sucessfully migrated the old WCS database on to the new Prime server and as a test I have pointed 1 anchor controller to it. Possible to point the WLC's to both WCS and Prime Infrastructure concurrently - I was thinking that it would be a quick fallback if we has any problems with Prime (I know there have been some!) We are not running MSE but we do have mobility groups, the WLC's are 5508 running 7.0.235.3 .
When performing an audit from NCS Prime 1.3 on our 5508 controllers (500 lic) we are getting mismatch messages from many of our 3602i AP's that say the following...
(Type)Configuration Name Audit Status Attribute Prime Infrastructure Value Controller Value (AP APname, Interface) 802.11a/n Mismatch Spectrum Intelligence true false
These AP's are not configured as Spectrum Intelligence on the controllers, rather as local. It seems that NCS believes that they are supposed to be SI. We have refreshed the config from controller many times but this does not change. The 5508's run v.7.2.111.3 Is there a change I can make on NCS or otherwise to make this mismatch go away? Is this a bug? It is not causing any problems (that we can see) but as most would rather not have these mismatches.
I'm trying to do configuration archiving in Prime Infrastructure 1.2 with a 5508 WLC (7.4).The job always fails (Admin -> Background Jobs) with the following error (see attachement):"SNMP: Failed to establish SNMP connection xxxx - Cause: Device is Unreachable. Check the ReadOnly community string." I double checked the SNMP credentials, they do match. For testing I also added a Public community just for the PI. Same result.Am I missing something?Is this not intended for Wireless Controllers?
before I open a TAC case: How does Cisco Prime NCS handle the device licenses for stack of 3750 switches? Just one device license for the stack or a license for every physical switch in the stack? I can't find a answer on the Cisco website, but maybe one of you knows it from a deployment you have done..
I'm currently running CiscoWorks LMS 4.0.1 on Windows 2003 under VMware and just got upgrade licensing for Prime Infrastructure 1.2. I am assuming that I will need to upgrade the current server to Prime LMS 4.2 in order to ensure that data migration to Prime Infrastructure goes well. I am planning to follow Cisco's recommendation to run Prime LMS and Prime Infrastructure in parallel for a time and migrate individual functions.
My real question is about Syslog handling. All of the managed devices are currently sending Syslog data to LMS. As a last step in the migration, is it possible to change the IP address of the Prime Infrastructure server to replace the Prime LMS server so that the Prime Infrastructure server will just start getting all the Syslog data, or do I need to go change hundreds of managed devices to point to a new address?
What is the relation between: cisco NCScisco Prime LMSCisco Prime infrastructure.As i orderd a Cisco Prime infrastructure from a Cisco Partner and what i got is :
x2 cisco NCS appliances x1 DVD cisco prime infrastructure x1 DVD Cisco prime 4.2
I have to realize a connection between an 5508 WLC and 3750 switch using one SFP cable. I found on Cisco documentation some reference about two different SFP cables. The first one is CAB-SFP-50CM, but this is used to interconnect two 3560 switches. The second is SFP-H10GB-CU1M. This one has SFP+ transceivers on both ends which I don’t know if are compatible with the standard SFP ports that can be found both on WLC and switch.
My question is if I can use one of these cables in order to connect my devices, or if you know other one piece SFP cables.
I have Cisco 5508 Wlan Controller and its having 6 Fiber Ports and I have AIR-LAP1131AG-E-K9 Access Point. Can this Access Point will work with this Lan Controller? Can i connect 3 switches to this wlan controller?
Configuring HP switches for Flexconnect. I am not sure if or not its doable? Access Points are 2600 and 3600 with 5508 as a controller. Idea is to keep the branch traffic local but the switches are HP.
I have cisco 5508 wlan controller with 8 ports can i connect 8 switches on these port. If i connect what will be configuration to work all these ports because only port 1 is working if i connect to switch remaining ports when i connect status showing is enable but not working.
we have some strange problem on our c7200 IOS 12.2(31) with an e BGP peer. the eBGP session begins as usual and without any problem, all prefixes (Full BGP table) are announced to the neighbor, of course during this time the CPU goes high up to 80%. Then the both peers are in sync and traffic run as usual, but after some minutes the CPU goes again up to 80% and the debug on the neighbor side shows that it gets again the BGP updates for all BGP prefixes from our 7200 with "rejected - duplicated" comments for every received prefix, it means that it gets the updates for prefixes which are already exists in BGP table.
And it happens every 3-5 minutes. Truly said I can't explain why our 7200 always tries to send the Full bgp table again and again. The work-around was to configure the peer with "soft inbound", it's OK and we'd like to use it anyway , but from my opinion BGP shouldn't send Full BGP table very 5 minutes without "soft inbound" as well.
Having issue in applying package updates in LMS 4.2.3?
I am getting an error whether going via the GUI or CLI. The key issue appears to be (according to the PSU.log):
[ Sat May 11 16:41:25 EST 2013 ] ERROR [PsuPkg Resolver : pick Unselected BasePackages] : Consistency check failed for base package SharedSwimRtr800(2.2) I have the version 2.0.1 of SharedSwimRtr800: 327.SharedSwimRtr8002.0.1SharedSwimRtr800 device package
And I can't seem to find 2.2 anywhere in the downloads section for LMS 4.2
I have a PS3 and I just got wireless internet. I was excited to update games and such and I knew it would be fast because both are close together. Every time I get done downloading one update, it gives me an error and I've found it to be dmz. It works on every other device but that one. I'm using a brand new Apple Airport Express and it's fully configured and I use Vista.
I have a problem downloading software and device updates for LMS 4.0.1.
In the psu.log I get the following:
[ Mon Nov 26 12:51:51 CET 2012 ] INFO [SwUpdateAction : getUpdatesFromCCO] : Validated Cisco.com credentials.. [ Mon Nov 26 12:51:51 CET 2012 ] INFO [SecurityHandler : getCSProxyHost] : No
We are a relatively new Cisco partner. We used to work with CDW and now we are buying from distribution and selling directly. We buy a lot of ASA 5505 units from D&H.
My question is, aside from the disc that comes with the unit where do we download the latest firmware image and management software? It appears you have to have a contract ID to get these through the Cisco website. Do we not get "car blanche" access as a Cisco partner to these resources?
Also doesn't the Cisco ASA 5505 at least come with a license for the latest firmware? Many ship with very old software and even old CDROMs.
Does cisco provides updates for underlying windows server in ACS SE 1113 ? Patch updates are available for ACS 4.2 , but how can we update underlying windows server , Does patches for ACS is enough to secure underlying windows server .
We have the RVS4000 and have IPS turned on. How can I be notified (email would work) when updates to the IPS signatures are available, so I can keep our IPS signatures current?
Running Windows 7 64bit, ISP is EATEL connected through a PACE 3801HGV to a new Linksys EA6500. Since the initial setup ( I was walked through the setup via Linksys support) I cannot access windows update, (the error screen tells me to restart my computer, "Windows update cannot currently check for updates because the service is not running. You may need to restart your computer", and I have done so 25 times) and I cannot update my Microsoft security essentials. Windows firewall tells me that the 'advanced settings snap-in' failed to load. Is it safe to uninstall and try to reinstall these or is there a way to start the services?
I already own a Beetel 220BX2 modem. I will be connecting : 1) my PC through the DWA-140 2) three Samsung Galaxy S 3) One LG phone (b/g) 4) Network Player (Yet to be bought) 5) Laptop
What are the steps to follow (Firmware updates, Configurations). I was planning to do VPN and to have each device have its own IP.
Is there a document that explains how the configurations are updated to the standby ASA and what needs to be manually added tot he ASA? I have two ASA 5510 running ASA ver 8.3(2) and ASDM 6.4(1). When I add static routes to the primary ASA the routes are not sent to the failover ASA. Is this to be expected or do I have a bug?
I have an 1841 running Advanced Enterprise Services 12.4(22)T3 that is functioning as a DHCP server and DNS server. What I am trying to figure out how to do is have the DNS service respond to queries about the clients of the dhcp service. I have successfully enabled it as a caching server for other requests, like "google.com" and "cisco.com", but what about the hosts on the local LAN?
As an example, let's say a Windows computer connects to the network with the hostname "computer" and receives an IP address from the 1841 with the domain name "test.net". I would like the 1841 to serve DNS queries for "computer.test.net" with the IP address that it assigned.
I am trying to get a 1811 to update routes on a 3750x. My static routes are being redistributed to the switch fine, however my connected networks are not My router has Vlan with several subnets attached.
interface Vlan1 description $ETH-SW-LAUNCH$$INTF-INFO-FE 2$$ES_LAN$$FW_INSIDE$ ip address xxx.xx.xx7.185 255.255.255.0 secondary ip address 172.90.0.185 255.255.255.0 secondary ip address 172.99.0.1 255.255.255.0 secondary ip address 10.170.10.254 255.255.255.0 secondary
[code]....
A host on the xxx.xx.xx6.0 network cannot ping a host on the 10.10.44.0 network. All ports on the switch and the router are in vlan1