Wireless :: Re Downloads And Updates Are Not Working
Nov 12, 2012It is on my home network. My administrator says I hog the internet. I cannot even update programs
View 6 RepliesIt is on my home network. My administrator says I hog the internet. I cannot even update programs
View 6 RepliesI've just bought a Cisco RV180W and I am trying to find its newest firmware but I am getting 404 everytime I access or search for this updates.
View 1 Replies View RelatedWe have currently LMS 3.2 installed. We know have some new switches C2960-48PST-L that are not supported in CiscoView and Common Services.When trying an update in Software Center | Device Update, we receive an error message:Error while downloading package information from Cisco.com for the selected products. See the C:/PROGRA~1/CSCOpx/log/psu.log file for details.
The psu.log file shows the following:
[ Wed Sep 26 14:33:15 CEST 2012 ] INFO [SecurityHandler : getCSProxyLogin] : No proxy User Name configured
[ Wed Sep 26 14:33:15 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Wed Sep 26 14:33:24 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Wed Sep 26 14:33:24 CEST 2012 ] INFO [SecurityHandler : getCSProxyPort] : No proxy port confgured
[ Wed Sep 26 14:33:26 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Wed Sep 26 14:33:26 CEST 2012 ] INFO [SecurityHandler : getCSProxyPort] : No proxy port confgured
[code]....
I have cisco router 800 series 887 VAW. WiFi is connected to all my devices through this router, i.e., Windows XP, Vista, Wii, Nexus 7 and HTC Desire S. I can access internet from all these devices. The apps which are already downloaded on my Android devices connect to internet, but the bigest problem is here:
1. Google Play does not connect (on both Nexus 7 and Desire S).
2. Chrome does not work on Nexus 7
3. Nexus 7 fails to check for any system update.
4. Fails to sync accounts.
I tried to contact to the company which gave me this router, but they told the problem lies with my tablet. But the tablet works perfectly fine with others networks and Android phone works fine with 3G and other networks.
the download speed of my downloads has been very slow, and most of the RAR files I download get RAR CRC errors like theseMy desktop has no active firewall on, and is clean from Maleware.What could be the problem with so many bad CRC files being downloaded?
View 1 Replies View RelatedI'll be downloading off of newsgroups and be pulling 3-4 MB/sec, no problems. My downloads are charted so I can see my speed never drops at all.but my web browsing will just STOP, for ~30 seconds. I'll have multiple tabs just STOP and crap out, while my downloads run fine. This also happens when I'm not downloading, so I know it's not a bandwidth issue,i assumed it was a router issue until I replaced my router and am getting the same issue.
View 1 Replies View Relatedjust purchase this RV016 and the firmware has been updated to 3.0.2.01-tm.
Almost every download I try through the router leads to a curruption somehow, even though the download manager gets it all. If I go straight from the cable modem I have no problems. I use a cat5 lead from the front ports on the router to my PC. A few small downloads under 512kb work.
I haven't change much from the default setup apart from the IP address to 192.168.12.10
It's a 4mbps upload and 0.8 downlink from what speedtest shows. I have tried diff DL managers, and get the same result on different connected PC's when through the router. The great thing about the RV016 is it speeds up the connection on this cable modem.
What can I change to get downloads working?
just purchase this RV016 and the firmware has been updated to 3.0.2.01-tm.Every download I try through the router leads to a curruption somehow, even though the download manager gets it all. If I go straight from the cable modem I have no problems.It's a 4mbps upload and 0.8 downlink from what speedtest shows. I have tried diff DL managers, and get the same result on different connected PC's. The great thing about the RV016 is it speeds up the connection on this cable modem.What can I change to get downloads working?
View 1 Replies View RelatedWireless reception became poor after recent Windows 7 updates.Can't find recent windows 7 64 bit driver for this card.
View 1 Replies View RelatedRegion : UnitedStates
Model : TL-WR841N
Hardware Version : V7
Firmware Version : 3.11.7 Build 100531 Rel. 72021n
ISP :
We received new tablet and smart tv but cannot use them due to connection problems. The tv will not connect to the router and the tablet shows strong router strength but will not connect to the internet. I checked for firmware updates and there are 3. Do I simply install the latest firmware or all 3?
I have 3 WAP321, all set to uk time zone, all the settings restor apart from the time on reboot that defaults back to 1999 despite NTP server listed, interestingly have to manually reset time to present before NTP will update it
View 1 Replies View RelatedIs there a way to get notifications (emails) when the external ip changes and the rotuer updates dyndns?i need to get an email about this change of ip. The only constraint is it has to work without a computer attached to the router as it would have to be powered on 24/7 So ip change notifiers like trueip or ipcheck won't work as they are programs that run in a computer.
View 9 Replies View RelatedRegion : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : TD-W8968_V1_130217
Having just updated the firmware I was surprised that it overwrote my configuration (WAN LAN & WiFi) settings.Is this normal for TP-Link firmware updates ?
Will this router ever see a firmware update so that we can have some additional functionality? The version of Twonky Media server that was bundled with this router was old to begin with, and now we are stuck with it? I tried the E4200 but it just kept spinning my drive that's parked in a ThermalTake BlackX, at least the 3000 doesn't do that, but when can we expect some new firmware, it's been 8 months. I used to love Linksys, but with this kind of support I may have to move to a different brand, and I bet I am not alone. it doesn't break the E3000 like you broke the 4200.
View 1 Replies View RelatedI am on a 4Mbps internet line.i have 3 PCs connected to the internet through a router. i noticed that direct downloads on the 2 PCs that are connected to the router wirelessly are capped at about 50-60kbps/sec per download. just to clarify, i can still achieve a full speed of 400kbps in total, but just that each download is capped at 50-60kbps.however, on the PC that is connected directly to the router via ethernet cable i am able to download well over 150kbps per download.so i don't think it's my ISP that is capping my downloads here, but i can't figure out why downloads would be capped on the wireless PCs. is it some settings on my router? i have everything pretty much set on default. the modem is a D-Link 2640B.
View 10 Replies View RelatedI would like to setup a a wireless antenna so one of my relatives can get online. I live in the city with a dsl connection and they live two houses down and out of the city limits. Can I configure the wireless connection so they can not use it to download music and movies ? Just to use it to browse the internet and check mail. Is it possible to throttle the band width they could use?
View 1 Replies View RelatedI recently switched to cable with Comcast. I am getting 20+Mbps wired, but I only get 1 Mbps w/wireless download. I am getting 4+ upload via wireless. Is my set up wrong? I reset my modem and Internet worked fine without any other changes. I am planning on buying a modem (instead of leasing) should I buy a gateway? I didn't think this router was out dated yet.
View 2 Replies View Relatedtrying to join an 1142 on a WLC_SRE version 7.4.
the AP can ping the controller and vice versa. In the controllers GUI: Monitor>Statisticc>AP join, I can find the mac of the AP that I am trying to get joined.
the details of this mac show:
Last error occurred: Lwapp discovery request rejected
last occurred error reason: Too many concurrent AP image downloads
Last Join Timestamp:
I can't get utube videos when I'm going through the router. I can get them if I'm on the modem only. The same applies to long PDFs, software updates, long virus definition updates, videos in general and graphics heavy websites. It just slows down eventually to a standstill and the download fails. As stated when the router is not connected the above items pop up or download reasonably quickly through the modem. We have moderate speed DSL.
View 1 Replies View RelatedI recently upgraded my internet speed service from my ISP (Brighthouse). They installed a gateway to replace their old modem, but I have had it bridged so it should act as a modem. Speedtest.net shows downloads on the order of 40-50 Mbps and uploads around 5 Mbps. If I try doing something interactively that pushes the speed and size of files (like flying over Google earth using my mouse to guide the direction and speed) my connection seems to hang. I have to reset the router (unpower and repower it) to get my internet connection to work. This has also happened when I quickly downloaded a series of large images - I click to get the next page fairly soon after the current page has finished downloaded. My router is a WRT350N.
View 6 Replies View RelatedI just got a new EA2700 and I notice that there is no way to get the same downloads speeds in wireless when compared to wired.Wired to my SHAW Cable modem I get 50 Mbps when I go wireless I get simply haalf of that. I spent almost 2 hours with the Linksys support on the phone and they said my router was bad.I do not buy that but it seems that something is not clear, or Linksys do a bogus advertisement saying that we can get 10x more speeds with this generation of routers or wireless technologies are just like that, cut your wired downloads speeds in half. Getting half download speeds in wireless connections versus full when wired?
View 9 Replies View RelatedWe just installed our EA6500 Smart Wi-Fi router and it works great! All admin set up, wired pc connected, wireless notebooks connected, wifi printer connected, and 2 game consoles connected. All work fine!BUT, the router is located here on my desk by the wired pc, cpu, & speakers and we can hear when a software download, software update, or even a router speed test is conducted! What a record sounded like when played at too fast a speed, that is what we are hearing: static and fast high pitched sounds.Tried moving our speaker further away from the router but there is only so far it can be moved.
View 1 Replies View RelatedI have a PS3 and I just got wireless internet. I was excited to update games and such and I knew it would be fast because both are close together. Every time I get done downloading one update, it gives me an error and I've found it to be dmz. It works on every other device but that one. I'm using a brand new Apple Airport Express and it's fully configured and I use Vista.
View 1 Replies View Relatedwe have some strange problem on our c7200 IOS 12.2(31) with an e BGP peer. the eBGP session begins as usual and without any problem, all prefixes (Full BGP table) are announced to the neighbor, of course during this time the CPU goes high up to 80%. Then the both peers are in sync and traffic run as usual, but after some minutes the CPU goes again up to 80% and the debug on the neighbor side shows that it gets again the BGP updates for all BGP prefixes from our 7200 with "rejected - duplicated" comments for every received prefix, it means that it gets the updates for prefixes which are already exists in BGP table.
And it happens every 3-5 minutes. Truly said I can't explain why our 7200 always tries to send the Full bgp table again and again. The work-around was to configure the peer with "soft inbound", it's OK and we'd like to use it anyway , but from my opinion BGP shouldn't send Full BGP table very 5 minutes without "soft inbound" as well.
Running Windows 7 64bit, ISP is EATEL connected through a PACE 3801HGV to a new Linksys EA6500. Since the initial setup ( I was walked through the setup via Linksys support) I cannot access windows update, (the error screen tells me to restart my computer, "Windows update cannot currently check for updates because the service is not running. You may need to restart your computer", and I have done so 25 times) and I cannot update my Microsoft security essentials. Windows firewall tells me that the 'advanced settings snap-in' failed to load. Is it safe to uninstall and try to reinstall these or is there a way to start the services?
View 14 Replies View RelatedHaving issue in applying package updates in LMS 4.2.3?
I am getting an error whether going via the GUI or CLI. The key issue appears to be (according to the PSU.log):
[ Sat May 11 16:41:25 EST 2013 ] ERROR [PsuPkg Resolver : pick Unselected BasePackages] :
Consistency check failed for base package SharedSwimRtr800(2.2)
I have the version 2.0.1 of SharedSwimRtr800:
327.SharedSwimRtr8002.0.1SharedSwimRtr800 device package
And I can't seem to find 2.2 anywhere in the downloads section for LMS 4.2
Just bought three D-Links from abroad ( Canada) and now am in Mauritius. They are brand new and now going to set them up.
1) DIR-825 H/W : B1 F/W : 2.02NA
2) DNS-323 H/W : C1 F/W : 1.09
3) DWA-140 H/w : B2 F/H : 1.50
I already own a Beetel 220BX2 modem. I will be connecting :
1) my PC through the DWA-140
2) three Samsung Galaxy S
3) One LG phone (b/g)
4) Network Player (Yet to be bought)
5) Laptop
What are the steps to follow (Firmware updates, Configurations). I was planning to do VPN and to have each device have its own IP.
My organization has about 15 workstations, all running XP Pro. Our server is running MS Server 2003.Is there a way to push Security Essentials definition updates to all these machines behind the scenes, rather than having each one download the updates individually?I would like to automate the process, if possible, so that once a week the update file is downloaded from MS update, then applied to all workstations, but I don't know where to begin.
View 6 Replies View RelatedI have Prime 1.3, two WLC 5508 and 8 switches 2960s I try update my devices through Prime, but I can't.
When I start "Upgrade Analysis" and select switch (Catalyst WS-C2960S-24PS-L) and image (c2960s-universalk9-mz.150-2.SE2.bin) then click to "Run report"
Prime shows me that "Image not Applicable for this Device" I try different images, but it does not work.
And with WLC 5508 the same trouble. Why Prime can't do right analysis and updates devices?
I have a problem downloading software and device updates for LMS 4.0.1.
In the psu.log I get the following:
[ Mon Nov 26 12:51:51 CET 2012 ] INFO [SwUpdateAction : getUpdatesFromCCO] : Validated Cisco.com credentials..
[ Mon Nov 26 12:51:51 CET 2012 ] INFO [SecurityHandler : getCSProxyHost] : No
[Code].....
We are a relatively new Cisco partner. We used to work with CDW and now we are buying from distribution and selling directly. We buy a lot of ASA 5505 units from D&H.
My question is, aside from the disc that comes with the unit where do we download the latest firmware image and management software? It appears you have to have a contract ID to get these through the Cisco website. Do we not get "car blanche" access as a Cisco partner to these resources?
Also doesn't the Cisco ASA 5505 at least come with a license for the latest firmware? Many ship with very old software and even old CDROMs.
I am on my second 3520 Laptop (first one purchsed in November 2012, returned last week) and the same problem is happening. This is that after every Windows Update I am unable to connect to the Internet. Wi-Fi checks out and used by other PC's in the house, I thought I'd cured it recently by being able to go in and sign into Mcafee (22/1) then an update on 23/1 and BAM! No Internet, no way can I get into McAfee to sign in, and the only options are restore to 21/1 (did that still no joy) or back to Factory (23/12/12) and re-install Office 2010 AGAIN! I have spent over £10 in calling the Dell Premium line, I have emailed the Support Director who arranged the laptop swap and still have this problem. I have posted it on Windows 8 forums, other forums I can find, Googled 'No Internet after Windows8 updates' 'till the cows come home, have gone back to Factory about 10 times over the 2 machines, tried to create Restore points myself but they disappear after the updates, all very frustrating. I 'could' get a refund but this is the 6th Dell machine we've had and I like the support. This machine, like 2 others (1 on Vista about to be upgraded to Win7 the other just upgraded) this new one will be used in a church based Debt Advice charity so eventually will be in a cupboard and used every Wednesday by an admin volunteer. It will be a terrible pain to have this trouble as she's not that young nor a PC expert so I need a seamless, invisible solution that will work without a hitch like all updates in XP, Vista and Win7.
View 3 Replies View RelatedDoes cisco provides updates for underlying windows server in ACS SE 1113 ? Patch updates are available for ACS 4.2 , but how can we update underlying windows server , Does patches for ACS is enough to secure underlying windows server .
View 4 Replies View Related