Webpages Stop Working Every Few Minutes But Downloads Run Fine
Jul 24, 2012
I'll be downloading off of newsgroups and be pulling 3-4 MB/sec, no problems. My downloads are charted so I can see my speed never drops at all.but my web browsing will just STOP, for ~30 seconds. I'll have multiple tabs just STOP and crap out, while my downloads run fine. This also happens when I'm not downloading, so I know it's not a bandwidth issue,i assumed it was a router issue until I replaced my router and am getting the same issue.
View 1 Replies
ADVERTISEMENT
Apr 15, 2013
I have an odd problem where http downloads will stop after a few seconds. I can stream video, do anything else with the internet perfectly. It's just when downloading files from websites will this happen.I use a wired connection. I have tried Firefox, Chrome, and IE10, and this problem happens in all of them. I use a WRT54GS router. I have tried downloading files in Ubuntu 12.10, Windows 7 using wireless, and WinXP, and they all can download files perfectly. Only Windows 8 seems to have this problem. Another thing is that my Windows 8 is a fresh install.I have also tried disabling Windows Firewall to no avail.
View 1 Replies
View Related
Jun 8, 2011
I'm having a problem with my router a Dlink DIR-655. I know its the router because if I direct connect from my cable modem the problem does not exist. What happens is I start downloading/streaming something it will start and then just stop prematurely causing me to restart it to get it too finish. For example on youtube, I start loading a video it loads normally for 2 mins of video and then will stop. I can get it to restart if I swap video quality and then it just does same thing. Loads around 2 mins of video then stops loading.
I have tried switching browsers, and I changed my MTU size from 1500 to 1300.My motherboard is a GA-P67A-UD4-B3 if that matters. I have the latest firmware on my router.
View 8 Replies
View Related
Nov 8, 2012
Applications such as skype, teamviewer, etc, are all working fine, however, when I try to load certain webpages, such as Facebook and forum boards, they don't load, just stay white screen.
Youtube, google, both load, I imagine this is because they're both on the Google servers, apart from any Google related sites, I can't find any that will load for me.
I think this is a problem wth my DNS addresses, I've tried a range of solutions, clearing my DNS, changing my IPv4 address, restarting the router, PC, but I can't seem to find a fix.
Running on windows 7 Home premium
NOTE: I had the Metropolitan police virus yesterday, I did a system restore to remove it, my internet worked fine after, it's only since I've moved from the router at my other house, to the one here that I'm having problems.
View 1 Replies
View Related
Dec 10, 2010
I have some issues with router configuration. I cannot open any external web pages, but ping or telnet is just fine. Im using router-on-a-stick scenario. Router connected to LAN trough EtherSwitch module. Config attached.
View 8 Replies
View Related
Aug 24, 2012
Internet works fine for a few minutes(around 2-5 usually), then it completely stops. It doesn't say it was disconnected, it just stops.Wireless has been working just fine the past few days.) We have used a desktop computer with this type of setup before and it worked just fine, that desktop was like a 2001 Dell that could barely stay on.
View 5 Replies
View Related
Feb 15, 2013
ASUS Notebook G60Vx Series
Windows 7 Home Premium 64-bit
Intel(R) WiFi Link 5100 AGN
A few days ago my internet suddenly stopped working. I plugged in the ethernet cord and everything worked fine. Checking the properties in the device manager showed the device was working properly, I also tried resetting it to make sure it was enabled but it did not work.
Upon troubleshooting, the "Windows Network Diagnostic" said the problems was that the Wireless adapter was not turned on. Using the switch on the front of the laptop as well as the function keys does nothing. Usually a graphic pops up showing if the WiFi is on or off, changinging transparent to show the WiFi is disabled. Now when I turn the switch on it always appears transparent, effectively going from off to off
So I know the computer reads both the function keys and the switch on the front but both methods never actually turns the adapter on. I just finished a system restore and nothing has changed
View 1 Replies
View Related
Nov 12, 2012
It is on my home network. My administrator says I hog the internet. I cannot even update programs
View 6 Replies
View Related
Nov 26, 2011
the download speed of my downloads has been very slow, and most of the RAR files I download get RAR CRC errors like theseMy desktop has no active firewall on, and is clean from Maleware.What could be the problem with so many bad CRC files being downloaded?
View 1 Replies
View Related
Jun 10, 2012
just purchase this RV016 and the firmware has been updated to 3.0.2.01-tm.
Almost every download I try through the router leads to a curruption somehow, even though the download manager gets it all. If I go straight from the cable modem I have no problems. I use a cat5 lead from the front ports on the router to my PC. A few small downloads under 512kb work.
I haven't change much from the default setup apart from the IP address to 192.168.12.10
It's a 4mbps upload and 0.8 downlink from what speedtest shows. I have tried diff DL managers, and get the same result on different connected PC's when through the router. The great thing about the RV016 is it speeds up the connection on this cable modem.
What can I change to get downloads working?
View 3 Replies
View Related
Jun 9, 2012
just purchase this RV016 and the firmware has been updated to 3.0.2.01-tm.Every download I try through the router leads to a curruption somehow, even though the download manager gets it all. If I go straight from the cable modem I have no problems.It's a 4mbps upload and 0.8 downlink from what speedtest shows. I have tried diff DL managers, and get the same result on different connected PC's. The great thing about the RV016 is it speeds up the connection on this cable modem.What can I change to get downloads working?
View 1 Replies
View Related
Nov 26, 2012
Here at home I have great WIFI connectivity but on my main PC that is hard wired into the modem I have no Internet access. My service seems fine as my cable/VOIP telephone/wifi work great. I'm not sure how to detect my ISP settings. In 'device manager' it shows that the teredo tunneling adapter will not start. I don't know what that is or if its important here.
View 14 Replies
View Related
Jun 19, 2012
I have changed the channels, changed the firmware, changed the position of the wireless router, reinserted my wireless card on my rig, changed the security, turned everything setting on or off.
View 2 Replies
View Related
Feb 27, 2013
I work in a small office/production building and lately we have been having problems with an unstable connection. We are using a Meraki MR24 access point in our warehouse, the connection always starts out strong but sooner or later everyone will briefly lose connection and the AP goes away, then comes back and we're reconnected at excellent connection again.
View 3 Replies
View Related
Apr 3, 2011
Had a look inside my HP Pavilion p6685l recently and found there wasn't any wifi card which was odd because it's been working fine for months.Device Manager says theres a 802.11n Wireless Lan Card in there but I traced the wires from the ariel to a chip on the board (MSI 2A9C according to Belarc ). Property sheet says it's a Ralink Card and so does the vendor id ( 1814 ) but the device id (3092) belongs to an Intel I20 1.5 Raid Controller which is where I got lost. I didn't know Raid Controllers did wifi.
View 14 Replies
View Related
Nov 26, 2011
I'm staying n hotel, its having secured wirless netwrk, but its not working in my windows 7 64 bit, but it works in 32 bit..
View 1 Replies
View Related
Mar 1, 2011
Ethernet stop working, but the wireless is fine, check in the device manger for any conflics none. open the network sharing centre and ran the truoble shooting utiiity and message came up with ethernet cable not plug in or brocken, which i have change it for a new one so its not the cable and its not the routor because B.T just gave me the new B.T Hub3, this network adaptor is on board and i have a wireless card in the PCI slot and the is a new main board which i built, everything was fine afew months ago til this started to acur
View 4 Replies
View Related
Jun 21, 2012
Router: Linksys Wireless-G Model: WRT54G v8
Wireless Adapter: Belkin model F7D1101 v1
I have two computers in my house, one is set up directly to the modem/router and the other (in my room) is set up wireless using that belkin adapter above.
Everything has always worked perfectly, but two days ago things went haywire. If my PC connects to the wireless, then it makes the router stop working for the other computer and any wireless devices I have. As long as I don't have my PC connected, then things run smoothly and there are no problems, so it's definitely stemming from my PC?
I thought it might have been the router at first, so I switched it out and it worked fine for over 24 hours, but then the problem came back.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Sunako-PC
Primary Dns Suffix . . . . . . . :
[Code].....
View 1 Replies
View Related
Feb 19, 2013
Nothing seems to be able to connect to my wireless network. It seems to have occurred after I installed a new copy of windows 7 onto my sister's desktop. A message appeared saying we have the same ip address. I've tried renewing our ip address on both desktop but it won't give us new ip address for some reason.
View 14 Replies
View Related
Apr 12, 2012
We have FIOS at our home. All the wall connections for ethernet are wired to the control panel in our house which are then connected to a wired router. We have another wireless router in the upstairs which gets internet through the wall port and it works fine.We had another downstairs wireless router in the living room that was working fine as well, but I reset it for certain reasons and it no longer works properly. All the proper lights light up: internet, port, power but the computer can only connect to the network and not the internet for some reason.
View 9 Replies
View Related
Apr 19, 2011
i share internet with my neighbor (we split the bill) and every so often like in the last 2 days, and usually not again for another 3 weeks for 2-3 more more days each time, am not able to browse(ff, chrome, ie) or use windows live messenger, but yet if i turn on bittorrent, the downloads are fine, the trackers don't update, but DHT and peer exchange update fine.And also, i can get on Gameranger (which uses UDP port 16000) and play games, and this happens to all 5 computers on the network, (4 wireless at my house[3 XPs 1 Win7] and one wired at her house[Win 7]), so it's not something on the computer, also, usually when i check my router the subnet is usually 255.255.255.0 but this morning before i came to work i noticed it was 255.0.0.0 , not sure if that matters, this has been happening for months, usually between every 3-4 weeks, we have no browser and msn use for 2-3 days?
View 1 Replies
View Related
Feb 9, 2012
I have an asa 5585x cluster. I get ssh access but no console access on the standby unit.
On the active unit, when I try console access, ASA ask for a password. I have tried all the one that I have configured, but without success.
View 5 Replies
View Related
Jun 27, 2011
Yesterday my wireless internet just appeared to stop working completely, it has always worked fine up unti now!I have checked all the usual issues, it is nothing to do with my router as i can use other laptops/desktops to access the internet fine.I am using a Pavillion DV6-1215sa which has a Atheros AR9285 802.11b/g WiFi Adapter.It has full strenght but just says Limited Connectivity, so it is picking up the wireless network but wont actually let me connect to the internet via it.
I am able to access the internet when i hard wire the ethernet cable into my laptop, but the just wont work for wireless.I have tried lots of different suggestions so far, but still cannot access the internet.
View 9 Replies
View Related
Oct 22, 2012
Whenever I start a Cisco VPN from any machine on the network, DNS requests to the DIR-655 stop working. If I reboot the router, DNS starts working again (the VPN was left on). Why starting the Cisco VPN would freak out the router?
View 3 Replies
View Related
Feb 7, 2013
Have a v2 E1200. Connect with PPPoE to ISP. IPv4 works fine. With firmware included on router, 2.0.01, it would receive a /64 of IPv6 from the ISP. This /64 would show up under 'status' / 'local network'. Although it did not seem to advertise this space to PC's on my network so I was unable to use it. I updated firmware to 2.0.04. Now it does not even pick up the IPv6 /64 at all.
Anyone have PPPoE and IPv6 working? Anywhere I can download 2.0.01 to try it again?
Is there a model of router that actually works with IPv6?
View 2 Replies
View Related
Nov 30, 2012
Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : Alice (Telecom Italia)
I have just bought this new device, installed, DSL is working fine but not the USB printer sharing. Allways tells me: "This system was not supported yet." Here is the message box: usb_printer_error.JPG.I have a HP DeskJet 1050 and a Canon Pixma MP150 machine. I know, the HP is not in the supported printer list, indeed Canon is.
View 13 Replies
View Related
Jun 10, 2011
all of a sudden my internet stop working and its now saying limited access ive tried all of thoose ipconfig things and none of them worked
View 19 Replies
View Related
Dec 20, 2012
I'm trying to get a static IP because I'm hosting a team fortress 2 server.So on windows, I made my internal IP static and that worked.On my router(cisco EPC 3925) you can go to administration ,then management and it says connection mode: DHCP which you can change to Static IP. When you change it to static IP it askes you:[CODE]
View 5 Replies
View Related
Apr 23, 2012
Once again I'm stuck to tethering on my phone due to my router deciding to call it quits for the random moment. I cannot access its control panel, the network just goes kaput. Given that I don't have access to the router since it's part of a double house (the side I'm not on of course), this is getting beyond irritating to reboot it when this happens as that is the only way to fix it. The connections are even wired, too. What kind of money does it take to get a router that is going to STAY on and just work? I'm ready to dump some serious cash into this at this point because this happens at least twice a week anymore. I just want a router that works. It needs to be wireless as my neighbor does use his kindle on it every once and a while.
View 4 Replies
View Related
Sep 15, 2012
I have installed VM ware v Sphere Enterprise Plus 5.0.0 and created a VM using an OVA file with LMS 4.1 running in Linux. It was working good since 3 weeks ago and I was adding snmp server configuration in all my devices (routers/switches) and suddenly one day DCR Server process stop working. I was trying the following actions:
1.- dmgtd stop -> to stop daemons
2.- dmgtd start -> to start again the daemons
And the DCR Server does n´t start up automatic.
Then I try this:
1.- pdexe DCR Server
And show this message:
[CPLMSCOL01/root-ade ~]# pd exec DCR Server
ERROR:Get reply from server failed:
and don´t start up the DCR Server.
View 1 Replies
View Related
May 11, 2012
I have setup a Cisco SR520W and everything appears to be working. After a few hours, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device.
If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my the modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again.
Here is my config file:
Building configuration...
Current configuration : 17830 bytes!version 12.4no service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msecservice
[Code].....
View 1 Replies
View Related
Dec 9, 2012
i've one of my 3500 that when finish to download the os, the front led stop working. During the power on and all the test the led is flashing in various colors pretty ipnotizing :-) When it bacame operative, the led stops. If i issue the test led flashing console command it works.
View 1 Replies
View Related
Aug 20, 2011
just today, my PC's connection will work for 10 minutes then totally shut down. Although it still says it is connected nothing will connect. Im posting from my old laptop and obviously is still working with my internet.
View 1 Replies
View Related
