Broadband :: Ethernet Adapter Not Working But Wireless Fine?
Mar 1, 2011
Ethernet stop working, but the wireless is fine, check in the device manger for any conflics none. open the network sharing centre and ran the truoble shooting utiiity and message came up with ethernet cable not plug in or brocken, which i have change it for a new one so its not the cable and its not the routor because B.T just gave me the new B.T Hub3, this network adaptor is on board and i have a wireless card in the PCI slot and the is a new main board which i built, everything was fine afew months ago til this started to acur
View 4 Replies
ADVERTISEMENT
Sep 7, 2011
Daughter is at college with brand new Vostro 3450. Was working on school network during summer but drops the connection multiple times during the day. She runs the Troubleshooting which then allows her to connect and 30 minutes later the connection is dropped again. The laptop works fine when connected to the internet via the ethernet cable. Here is what has been done by the IT support at the school.
1 - Deleted the Intel wireless utility as they thought it was "fighting" with the Windows software for control over the wireless.
2 - Increased the power for the wireless card to "high performance".
3 - Reinstalled Windows 7 to eliminate that there is a software issue.
4 - Replaced the Intel Wireless Card with new part sent by Dell.
Now the IT supports recommendation is to "get a new system" and that perhaps the Vostro's wireless card is "not compatible with their network". For Dell computers they sell the Latitude to the students.
My daugther likes the Vostro. She doesn't want to give it up. Wants the system to work. She had the laptop during the summer session and had problems with connection. The Windows software was reinstalled thinking there was a virus (although no evidence of one) and then she had no connection problems for the whole summer. She came home for 2 weeks and returned back to school and then the system would not work again.
I don't know what to do. Can I buy a USB wireless adapter for her to temporarily use until I can figure out how to fix this problem. Personally, I think there is a design flaw with the vostro.
View 3 Replies
View Related
Mar 10, 2011
My pc has a on board ethernet adaptor that stopped working all of sudden... I have no idea about what to do... I tried to check if there were any problem with a driver or something but the nic isn't even detected by the pc..
View 1 Replies
View Related
Nov 15, 2012
So I have an HP Pavilion dv9000 laptop with window 8 installed and when I try to connect to the internet I keep getting an error that says the "Ethernet" Adapter is not working properly. I used to be able to go on the internet and then my dad had my computer for a while and now it's not working.
View 7 Replies
View Related
Jan 2, 2013
why my computer cannot connect to wifi but can only connect to ethernet and broadband only?
View 2 Replies
View Related
Jun 30, 2012
While im playing games like battefield 3 left 4 dead 2 or minecraft i get rubberbanding lag which is basically my game character running foward then being shot back to his original postion. I originally was using a wireless usb adapter so i blamed it for the cause of the lag. (My pings were fine btw) I went to ethernet for a week and the lag went away so everything is fine via ethernet. I just bought a new wireless card but there is still this terrible lag!
View 10 Replies
View Related
Apr 5, 2012
I built my first computer yesterday and everything went amazing. Unfortunately, I am having trouble simply connecting to the internet via wired, ethernet, cables. I can connect wirelessly but I need to connect wired as well. My IP when I am only using a wire starts as 169..I know this typically means there is a problem with my router, however, due to the fact that my laptop can use the wire router perfectly fine but my computer doesn't I am at a loss. I have downloaded the ethernet drivers but I don't know what to do.
View 2 Replies
View Related
Jul 9, 2012
I have a Dell Inspiron 6400 running Windows Vista with a Broadcom 440x10/100 Integrated Controller. I've had the computer for 5 years, and have always connected to the internet using wireless with no problem. Just moved to a new place, don't have a router yet, and now when I try to connect via the ethernet cable my internet is sooo slow, taking about a minute to load a page. My roommate's computer runs great using the ethernet.
View 1 Replies
View Related
Aug 12, 2011
My computer won't connect to a .net address but it will to a .com address
View 1 Replies
View Related
Jun 19, 2012
I have changed the channels, changed the firmware, changed the position of the wireless router, reinserted my wireless card on my rig, changed the security, turned everything setting on or off.
View 2 Replies
View Related
Mar 1, 2011
connect new computer running windows 7 to small peer to peer network...modem to connect to interenet is speadstream 5660...network works fine but cannot access internet...i works great in my office with a different modem...i can access the windows 7 computer remotely using go to assist also...trying to find out if there are issues with windows 7 and the speedstream 5660 modem...
View 2 Replies
View Related
Nov 26, 2011
I'm staying n hotel, its having secured wirless netwrk, but its not working in my windows 7 64 bit, but it works in 32 bit..
View 1 Replies
View Related
Feb 15, 2013
ASUS Notebook G60Vx Series
Windows 7 Home Premium 64-bit
Intel(R) WiFi Link 5100 AGN
A few days ago my internet suddenly stopped working. I plugged in the ethernet cord and everything worked fine. Checking the properties in the device manager showed the device was working properly, I also tried resetting it to make sure it was enabled but it did not work.
Upon troubleshooting, the "Windows Network Diagnostic" said the problems was that the Wireless adapter was not turned on. Using the switch on the front of the laptop as well as the function keys does nothing. Usually a graphic pops up showing if the WiFi is on or off, changinging transparent to show the WiFi is disabled. Now when I turn the switch on it always appears transparent, effectively going from off to off
So I know the computer reads both the function keys and the switch on the front but both methods never actually turns the adapter on. I just finished a system restore and nothing has changed
View 1 Replies
View Related
Feb 19, 2013
Nothing seems to be able to connect to my wireless network. It seems to have occurred after I installed a new copy of windows 7 onto my sister's desktop. A message appeared saying we have the same ip address. I've tried renewing our ip address on both desktop but it won't give us new ip address for some reason.
View 14 Replies
View Related
Feb 7, 2013
Have a v2 E1200. Connect with PPPoE to ISP. IPv4 works fine. With firmware included on router, 2.0.01, it would receive a /64 of IPv6 from the ISP. This /64 would show up under 'status' / 'local network'. Although it did not seem to advertise this space to PC's on my network so I was unable to use it. I updated firmware to 2.0.04. Now it does not even pick up the IPv6 /64 at all.
Anyone have PPPoE and IPv6 working? Anywhere I can download 2.0.01 to try it again?
Is there a model of router that actually works with IPv6?
View 2 Replies
View Related
Nov 30, 2012
Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : Alice (Telecom Italia)
I have just bought this new device, installed, DSL is working fine but not the USB printer sharing. Allways tells me: "This system was not supported yet." Here is the message box: usb_printer_error.JPG.I have a HP DeskJet 1050 and a Canon Pixma MP150 machine. I know, the HP is not in the supported printer list, indeed Canon is.
View 13 Replies
View Related
Dec 19, 2012
Earlier my desktop was to b in d same place where the router was der. Everything worked fine. Now I decided to shift my desktop to another room. I have kept the router at the earlier place only. I have brought a 25m long new cat 5 cable. When I connected it to my desktop, the orange led on ethernet port do not light up and the desktop is unable to detect the ethernet cable and hence the internet connection. On the router, a light of ethernet keeps on blinking every 1 second. I was worried whether my ethernet port got fried. So i inserted another ethernet cable, but then the ethernet orange light came and the pc detedted the connection. Therefore I thought the cable might be faulty. Therefore I connected my laptop with that 25m cable. But my laptop detected it and showed the internet connection. But now when i again connect the cable to my desktop, there's no light and the pc does not detect it. However, if i connect the 25m cable to my desktop then during boot the ethernet light on router is stable just as when it is normally connected to the internet. But when i go into windows it starts blinking every 1 second.
My router is MTNL Model No. UT-304R2
Desktop - Asus P7H55, core i5
Laptop- HP 2000
Windows 7 Ultimate on both desktop and laptop.
View 17 Replies
View Related
Jan 11, 2011
Recently my desktop has experienced very slow download speeds (~0.11 Mbps), however the upload speed appears to be in line (~2.0Mbps). These numbers are taken from Comcast's speed test (my ISP). It is obviously a problem with my PC because everything else on the network (PS3, Laptop) have great signals with no problems. I just recently reverted the Desktop back to its factory state, and everything was working fine for a couple of months. The desktop in question uses Vista 32-bit and the Belkin Basic USB Wireless Adapter.
View 1 Replies
View Related
Feb 12, 2013
I have a P7H55 Asus Motherboard with the Ethernet port and cable working fine individually. However, when i connect them together,the Ethernet light on the router remains stable as if connected but still the desktop shows not connected. i have installed the drivers which came from the motherboard manufacturer and are the latest.In the Network and Sharing Center, the icon is enabled.It does not show cross sign.
View 1 Replies
View Related
Nov 5, 2011
I have a XPS 15 (502x). It has the above adapter installed but when I insert my sim card it says no network available.
I use the same sim card in a USB modem and it works fine.
View 3 Replies
View Related
Feb 10, 2013
I have a P7H55 Asus Motherboard with the ethernet port and cable working fine individually. However, when i connect them together,the ethernet light on the router remains stable as if connected but still the desktop shows not connected. This time i have installed the drivers which came from the motherboard manufacturer and are the latest. In the Network and Sharing Center, the icon is enabled. It does not show cross sign.
View 10 Replies
View Related
Dec 19, 2012
Earlier my desktop was to b in d same place where the router was der. Everything worked fine. Now I decided to shift my desktop to another room. I have kept the router at the earlier place only. I have brought a 25m long new cat 5 cable. When I connected it to my desktop, the orange led on ethernet port do not light up and the desktop is unable to detect the ethernet cable and hence the internet connection. On the router, a light of ethernet keeps on blinking every 1 second. I was worried whether my ethernet port got fried. So i inserted another ethernet cable, but then the ethernet orange light came and the pc detedted the connection. Therefore I thought the cable might be faulty. Therefore I connected my laptop with that 25m cable. But my laptop detected it and showed the internet connection. But now when i again connect the cable to my desktop, there's no light and the pc does not detect it. However, if i connect the 25m cable to my desktop then during boot the ethernet light on router is stable just as when it is normally connected to the internet. But when i go into windows it starts blinking every 1 second.
My router is MTNL Model No. UT-304R2
Desktop - Asus P7H55, core i5
Laptop- HP 2000
Windows 7 Ultimate on both desktop and laptop.
View 14 Replies
View Related
Jul 21, 2011
My desktop with Windows Vista is connected to the modem with a standard ethernet cord, and when I try to plug the same cord into my laptop I don't get any internet access. My laptop is running Windows 7. I have tried powering the modem off for 15 seconds multiple times, but to no avail. I am just trying to make this connection work until I purchase a router.
View 7 Replies
View Related
Nov 26, 2012
Here at home I have great WIFI connectivity but on my main PC that is hard wired into the modem I have no Internet access. My service seems fine as my cable/VOIP telephone/wifi work great. I'm not sure how to detect my ISP settings. In 'device manager' it shows that the teredo tunneling adapter will not start. I don't know what that is or if its important here.
View 14 Replies
View Related
Feb 27, 2013
I work in a small office/production building and lately we have been having problems with an unstable connection. We are using a Meraki MR24 access point in our warehouse, the connection always starts out strong but sooner or later everyone will briefly lose connection and the AP goes away, then comes back and we're reconnected at excellent connection again.
View 3 Replies
View Related
May 8, 2011
My broadband works fine on my laptop but my Wi-Fi will not connect,it keep on saying "not connected"
View 3 Replies
View Related
Apr 3, 2011
Had a look inside my HP Pavilion p6685l recently and found there wasn't any wifi card which was odd because it's been working fine for months.Device Manager says theres a 802.11n Wireless Lan Card in there but I traced the wires from the ariel to a chip on the board (MSI 2A9C according to Belarc ). Property sheet says it's a Ralink Card and so does the vendor id ( 1814 ) but the device id (3092) belongs to an Intel I20 1.5 Raid Controller which is where I got lost. I didn't know Raid Controllers did wifi.
View 14 Replies
View Related
Jul 24, 2012
I'll be downloading off of newsgroups and be pulling 3-4 MB/sec, no problems. My downloads are charted so I can see my speed never drops at all.but my web browsing will just STOP, for ~30 seconds. I'll have multiple tabs just STOP and crap out, while my downloads run fine. This also happens when I'm not downloading, so I know it's not a bandwidth issue,i assumed it was a router issue until I replaced my router and am getting the same issue.
View 1 Replies
View Related
Apr 12, 2012
We have FIOS at our home. All the wall connections for ethernet are wired to the control panel in our house which are then connected to a wired router. We have another wireless router in the upstairs which gets internet through the wall port and it works fine.We had another downstairs wireless router in the living room that was working fine as well, but I reset it for certain reasons and it no longer works properly. All the proper lights light up: internet, port, power but the computer can only connect to the network and not the internet for some reason.
View 9 Replies
View Related
Apr 19, 2011
i share internet with my neighbor (we split the bill) and every so often like in the last 2 days, and usually not again for another 3 weeks for 2-3 more more days each time, am not able to browse(ff, chrome, ie) or use windows live messenger, but yet if i turn on bittorrent, the downloads are fine, the trackers don't update, but DHT and peer exchange update fine.And also, i can get on Gameranger (which uses UDP port 16000) and play games, and this happens to all 5 computers on the network, (4 wireless at my house[3 XPs 1 Win7] and one wired at her house[Win 7]), so it's not something on the computer, also, usually when i check my router the subnet is usually 255.255.255.0 but this morning before i came to work i noticed it was 255.0.0.0 , not sure if that matters, this has been happening for months, usually between every 3-4 weeks, we have no browser and msn use for 2-3 days?
View 1 Replies
View Related
Feb 9, 2012
I have an asa 5585x cluster. I get ssh access but no console access on the standby unit.
On the active unit, when I try console access, ASA ask for a password. I have tried all the one that I have configured, but without success.
View 5 Replies
View Related
Apr 10, 2012
i changed my laptop from windows 7 home basic 32bit to ultimate 64bit but now the programs in the old windows does not want to install, and i was asking is the anyway i could get the programs from my old windows to work on my new windows? my laptop is a HP 620
View 1 Replies
View Related
May 9, 2011
XP Home edition, went to tools can't find working off line or working online to make sure off line is not checked so I can get on line DSL Verizon , Wireless router, wireless switch in on, on the cpu
View 1 Replies
View Related
