Here at home I have great WIFI connectivity but on my main PC that is hard wired into the modem I have no Internet access. My service seems fine as my cable/VOIP telephone/wifi work great. I'm not sure how to detect my ISP settings. In 'device manager' it shows that the teredo tunneling adapter will not start. I don't know what that is or if its important here.
View 14 RepliesASUS Notebook G60Vx Series
Windows 7 Home Premium 64-bit
Intel(R) WiFi Link 5100 AGN
A few days ago my internet suddenly stopped working. I plugged in the ethernet cord and everything worked fine. Checking the properties in the device manager showed the device was working properly, I also tried resetting it to make sure it was enabled but it did not work.
Upon troubleshooting, the "Windows Network Diagnostic" said the problems was that the Wireless adapter was not turned on. Using the switch on the front of the laptop as well as the function keys does nothing. Usually a graphic pops up showing if the WiFi is on or off, changinging transparent to show the WiFi is disabled. Now when I turn the switch on it always appears transparent, effectively going from off to off
So I know the computer reads both the function keys and the switch on the front but both methods never actually turns the adapter on. I just finished a system restore and nothing has changed
Had a look inside my HP Pavilion p6685l recently and found there wasn't any wifi card which was odd because it's been working fine for months.Device Manager says theres a 802.11n Wireless Lan Card in there but I traced the wires from the ariel to a chip on the board (MSI 2A9C according to Belarc ). Property sheet says it's a Ralink Card and so does the vendor id ( 1814 ) but the device id (3092) belongs to an Intel I20 1.5 Raid Controller which is where I got lost. I didn't know Raid Controllers did wifi.
View 14 Replies View RelatedWe have FIOS at our home. All the wall connections for ethernet are wired to the control panel in our house which are then connected to a wired router. We have another wireless router in the upstairs which gets internet through the wall port and it works fine.We had another downstairs wireless router in the living room that was working fine as well, but I reset it for certain reasons and it no longer works properly. All the proper lights light up: internet, port, power but the computer can only connect to the network and not the internet for some reason.
View 9 Replies View RelatedI try pinging google, its fine, antivirus and other software update in time, but internet browsers cannot browse net
View 4 Replies View RelatedDaughter is at college with brand new Vostro 3450. Was working on school network during summer but drops the connection multiple times during the day. She runs the Troubleshooting which then allows her to connect and 30 minutes later the connection is dropped again. The laptop works fine when connected to the internet via the ethernet cable. Here is what has been done by the IT support at the school.
1 - Deleted the Intel wireless utility as they thought it was "fighting" with the Windows software for control over the wireless.
2 - Increased the power for the wireless card to "high performance".
3 - Reinstalled Windows 7 to eliminate that there is a software issue.
4 - Replaced the Intel Wireless Card with new part sent by Dell.
Now the IT supports recommendation is to "get a new system" and that perhaps the Vostro's wireless card is "not compatible with their network". For Dell computers they sell the Latitude to the students.
My daugther likes the Vostro. She doesn't want to give it up. Wants the system to work. She had the laptop during the summer session and had problems with connection. The Windows software was reinstalled thinking there was a virus (although no evidence of one) and then she had no connection problems for the whole summer. She came home for 2 weeks and returned back to school and then the system would not work again.
I don't know what to do. Can I buy a USB wireless adapter for her to temporarily use until I can figure out how to fix this problem. Personally, I think there is a design flaw with the vostro.
I have changed the channels, changed the firmware, changed the position of the wireless router, reinserted my wireless card on my rig, changed the security, turned everything setting on or off.
View 2 Replies View RelatedI work in a small office/production building and lately we have been having problems with an unstable connection. We are using a Meraki MR24 access point in our warehouse, the connection always starts out strong but sooner or later everyone will briefly lose connection and the AP goes away, then comes back and we're reconnected at excellent connection again.
View 3 Replies View RelatedI'm staying n hotel, its having secured wirless netwrk, but its not working in my windows 7 64 bit, but it works in 32 bit..
View 1 Replies View RelatedI'll be downloading off of newsgroups and be pulling 3-4 MB/sec, no problems. My downloads are charted so I can see my speed never drops at all.but my web browsing will just STOP, for ~30 seconds. I'll have multiple tabs just STOP and crap out, while my downloads run fine. This also happens when I'm not downloading, so I know it's not a bandwidth issue,i assumed it was a router issue until I replaced my router and am getting the same issue.
View 1 Replies View RelatedEthernet stop working, but the wireless is fine, check in the device manger for any conflics none. open the network sharing centre and ran the truoble shooting utiiity and message came up with ethernet cable not plug in or brocken, which i have change it for a new one so its not the cable and its not the routor because B.T just gave me the new B.T Hub3, this network adaptor is on board and i have a wireless card in the PCI slot and the is a new main board which i built, everything was fine afew months ago til this started to acur
View 4 Replies View RelatedNothing seems to be able to connect to my wireless network. It seems to have occurred after I installed a new copy of windows 7 onto my sister's desktop. A message appeared saying we have the same ip address. I've tried renewing our ip address on both desktop but it won't give us new ip address for some reason.
View 14 Replies View Relatedi share internet with my neighbor (we split the bill) and every so often like in the last 2 days, and usually not again for another 3 weeks for 2-3 more more days each time, am not able to browse(ff, chrome, ie) or use windows live messenger, but yet if i turn on bittorrent, the downloads are fine, the trackers don't update, but DHT and peer exchange update fine.And also, i can get on Gameranger (which uses UDP port 16000) and play games, and this happens to all 5 computers on the network, (4 wireless at my house[3 XPs 1 Win7] and one wired at her house[Win 7]), so it's not something on the computer, also, usually when i check my router the subnet is usually 255.255.255.0 but this morning before i came to work i noticed it was 255.0.0.0 , not sure if that matters, this has been happening for months, usually between every 3-4 weeks, we have no browser and msn use for 2-3 days?
View 1 Replies View RelatedI have an asa 5585x cluster. I get ssh access but no console access on the standby unit.
On the active unit, when I try console access, ASA ask for a password. I have tried all the one that I have configured, but without success.
Have a v2 E1200. Connect with PPPoE to ISP. IPv4 works fine. With firmware included on router, 2.0.01, it would receive a /64 of IPv6 from the ISP. This /64 would show up under 'status' / 'local network'. Although it did not seem to advertise this space to PC's on my network so I was unable to use it. I updated firmware to 2.0.04. Now it does not even pick up the IPv6 /64 at all.
Anyone have PPPoE and IPv6 working? Anywhere I can download 2.0.01 to try it again?
Is there a model of router that actually works with IPv6?
Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : Alice (Telecom Italia)
I have just bought this new device, installed, DSL is working fine but not the USB printer sharing. Allways tells me: "This system was not supported yet." Here is the message box: usb_printer_error.JPG.I have a HP DeskJet 1050 and a Canon Pixma MP150 machine. I know, the HP is not in the supported printer list, indeed Canon is.
We have a pair of CSS 11503 installed in our DC. Stickiness is configured for one of the application since long back and was working pretty fine till last couple of months. Since last two months, we observed that CSS is not distributing sessions the way it suppose to be. Mostly, it forwards the session to same server even though request is coming from different sources. Once we refresh the sessions manually, it starts working fine. We have to do this exercise manually every alternate day.
View 1 Replies View RelatedI was using the Internet fine lastnight switched on my acer laptop this morning and wasnt connected to the router. I tried connecting but it just fails. I'm still able to connect with my iPad and iPod. I tried uninstalling and reinstalling the network adapter however this fails to successfully install. I've searched for hours but can't find a solution. I'm also unable to reset the router etc because I live in china and the router is in a roommates room whose door is locked.
View 2 Replies View RelatedI have a WRT120 wireless router that works fine, but the wired connection has failed. I have restarted the modem, router and the computer and still doesn't recognize the wired connection.
View 9 Replies View RelatedI have an HP Mini running windows xp. When its connected to wifi everywhere else it works but this new place it will not allow my internet to bring up anything.
View 1 Replies View RelatedMy newly installed E1200 only sends speeds of about 16 mbps wireless, but sends the ful 60 mpbs when wired. What is going on. Firmware is up to date. Changing the channels didn't do anything. Is there a way to figure out if the problem is with my laptops wireless card.
View 9 Replies View RelatedOn my phone I connected to the wireless network but the internet won't work apparently you have to do something with a proxy and type in a router code.
View 2 Replies View RelatedWe got a lynksys model at our home. it seems that everything is working the pc's connected with cables are working with internet. The wifi sends out and you can get on it. But internet isn't working with wifi also if it says connected etc.
View 1 Replies View RelatedInternet works fine for a few minutes(around 2-5 usually), then it completely stops. It doesn't say it was disconnected, it just stops.Wireless has been working just fine the past few days.) We have used a desktop computer with this type of setup before and it worked just fine, that desktop was like a 2001 Dell that could barely stay on.
View 5 Replies View RelatedSo I have 2 laptops, a win 7 and a win 8,The windows 7 laptop works on the internet fine, but the windows 8 one always disconnects, even when the win 7 isn't on.It disconnects usually when I'm running multiple programs that use the internet on it, but when I run a game like counter-strike, it disconnects too, but not nearly as often.The router is from 2008 or 2009, but it's a tiny aztech one. I'm sure it's not the isp, because like I said, the other laptop works fine.
View 2 Replies View RelatedSo,I'm living in a university campus and I've got an internet connection via a proxy server.The thing is,when ever I plug in the network cable,my PC recognizes the network,but the little network tray says "No internet access". But the curious thing is that the internet actualy works.My browser works,I can access any website (well,except the restricted ones via proxy) but it works just like any other internet connection in the campus. But,recently I've got my hands on a VPN account to have access to things that my proxy wouldn't allow me (torrents for example).But,probably because of that "No internet access" problem,when ever I try to make that VPN account,it tells me that I need to connect to the internet first. I already am,but my PC still keeps requiring an internet connection.I can't manualy connect to it,since I don't have the ISP data required. I've only got my VPN account data (VPN username and password).
This is kind of annoying,since this only happens to me,my other room mates don't have this problem,they plug in their cables,their network adapters recognize both the network and the internet access. Only mine says "No internet access" but the internet works fine.My operating system is genuine,when ever I go home and connect to my home network this problem doesn't ocure anymore,this only happens when I connect to my university's internet connection.I've tried reinstalling my operating system.Still no results.I'll attach a printscreen so you could see exactly what I mean.
All the light indicator of the router are working as they should,however there will be no internet connection.This happens about once a day(rest of the day the internet works fine),I then have to switch off the router,wait for a good amount of time and then switch it back on and then internet will work fine.I use the router for many devices like my windows 7 laptop,an ipad,iphones.
View 1 Replies View RelatedMy friend's wireless internet just suddenly failed last night. She was watching Youtube videos, but had to do something, so she closed the window. When she came back, she couldn't connect, and was given an error, something about user connectivity.Her wired connection is still working.
View 5 Replies View RelatedI am facing with internet download speed reduced to 1/4th (500kbps) of promised speed (2Mbps).
ISP: Tikona India Type: Wireless unit at roof connected to PoE and ethernet cable
OS:Win7 and ASUS Express Gate I am using the ISP for over a year and was happy but for past 1 month got issues.
The first service engineer came and changed the poer adapter, clipped the ethernet LAN cable. The AI NET 2 utility in BIOS showed the pair 1-2 and 3-4 are short. So second service engineer changed the cable, power adapter and router.
I hoped that things will get resolved but still the speed was slower so the enginner unplugged the LAN cable from my desktop and checked the speed in his laptop. He was getting 2.5Mbps. Then I checked in safe mode with networking and asus express gate but still got reduced speed from 500 to 600kbps.
I had a NIC replacement so tested with that also and got same reduced speed.
connect new computer running windows 7 to small peer to peer network...modem to connect to interenet is speadstream 5660...network works fine but cannot access internet...i works great in my office with a different modem...i can access the windows 7 computer remotely using go to assist also...trying to find out if there are issues with windows 7 and the speedstream 5660 modem...
View 2 Replies View RelatedA couple of days ago I bought a new desktop PC (Here is the link if anybody wants info on the PC [URL] but anyway, I'll get to my problem. My wireless router is downstairs in the living room and my desktop PC is upstairs in the bedroom. Theoretically, My PC's wireless card should be able to reach the router perfectly, being as I have several other PC's in the house that I use from my bedroom and the connection is 'Very Good' to 'Excellent'. Although with this new computer the connection's strength is very weak and it's so slow using the internet or trying to download things. It's internet is almost unusable. I've tried swapping the wireless card, but to avail. The connection is still awful.
Or of a way to boost the signal of my wireless card?
I have a Netgear WPN824 v2 wireless router. The router login page has become horribly slow recently but the rest of the network seems unaffected. Some times the page doesn't even load all the way or properly, such as with a standard font and options missing.
View 4 Replies View Relatedwhy my computer cannot connect to wifi but can only connect to ethernet and broadband only?
View 2 Replies View Related