Set Up Linksys Router No Microsoft Updates
Feb 5, 2013
Running Windows 7 64bit, ISP is EATEL connected through a PACE 3801HGV to a new Linksys EA6500. Since the initial setup ( I was walked through the setup via Linksys support) I cannot access windows update, (the error screen tells me to restart my computer, "Windows update cannot currently check for updates because the service is not running. You may need to restart your computer", and I have done so 25 times) and I cannot update my Microsoft security essentials. Windows firewall tells me that the 'advanced settings snap-in' failed to load. Is it safe to uninstall and try to reinstall these or is there a way to start the services?
View 14 Replies
ADVERTISEMENT
Sep 25, 2012
We have currently LMS 3.2 installed. We know have some new switches C2960-48PST-L that are not supported in CiscoView and Common Services.When trying an update in Software Center | Device Update, we receive an error message:Error while downloading package information from Cisco.com for the selected products. See the C:/PROGRA~1/CSCOpx/log/psu.log file for details.
The psu.log file shows the following:
[ Wed Sep 26 14:33:15 CEST 2012 ] INFO [SecurityHandler : getCSProxyLogin] : No proxy User Name configured
[ Wed Sep 26 14:33:15 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Wed Sep 26 14:33:24 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Wed Sep 26 14:33:24 CEST 2012 ] INFO [SecurityHandler : getCSProxyPort] : No proxy port confgured
[ Wed Sep 26 14:33:26 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Wed Sep 26 14:33:26 CEST 2012 ] INFO [SecurityHandler : getCSProxyPort] : No proxy port confgured
[code]....
View 2 Replies
View Related
Feb 12, 2011
I'm havoing probems with my network "stuttering" and wanted to update the firmware. The RVO82 is currently running v2.0.0.19-tm and I have downloaded the latest; V 4.0.0.0.07-tm and tried to upload it to the router using both Safari and Firefox but the update won't take. I have followed the instructions to go to a fixed ip of 192..168.1.50 and have a connection directly to the router( bypassing the switch) but cannot get it to update.
View 1 Replies
View Related
Jun 28, 2012
Is there a way to get notifications (emails) when the external ip changes and the rotuer updates dyndns?i need to get an email about this change of ip. The only constraint is it has to work without a computer attached to the router as it would have to be powered on 24/7 So ip change notifiers like trueip or ipcheck won't work as they are programs that run in a computer.
View 9 Replies
View Related
Aug 4, 2011
Will this router ever see a firmware update so that we can have some additional functionality? The version of Twonky Media server that was bundled with this router was old to begin with, and now we are stuck with it? I tried the E4200 but it just kept spinning my drive that's parked in a ThermalTake BlackX, at least the 3000 doesn't do that, but when can we expect some new firmware, it's been 8 months. I used to love Linksys, but with this kind of support I may have to move to a different brand, and I bet I am not alone. it doesn't break the E3000 like you broke the 4200.
View 1 Replies
View Related
Mar 26, 2011
I did not put a wep code/passphrase in my router when asked if i wanted it secure. I said yes and router was set up secure but I don't know the code. How do i find it?
View 1 Replies
View Related
Aug 25, 2012
I'm trying to configure 1700 K9 router to act as PPTP client and connect to Microsoft VPN server (in order to enable all clients on LAN to seamlessly access host on remote location). [URL]
I'm using GMS3 to test everything in lab environment. I managed to connect to Microsoft VPN server but the connection drops immediately. Below is debug info from router R1 (router R2 just simulates host on LAN) and configurations for both routers. The only clue I got from debug is that immediately before closing connection there's a message "CCP: Failed to negotiate with peer"...
R1#sh debug
PPP:
PPP detailed event debugging is on
MPPE Packet Details debugging is on
[Code].....
View 2 Replies
View Related
Dec 25, 2012
I have a PS3 and I just got wireless internet. I was excited to update games and such and I knew it would be fast because both are close together. Every time I get done downloading one update, it gives me an error and I've found it to be dmz. It works on every other device but that one. I'm using a brand new Apple Airport Express and it's fully configured and I use Vista.
View 1 Replies
View Related
Mar 16, 2010
we have some strange problem on our c7200 IOS 12.2(31) with an e BGP peer. the eBGP session begins as usual and without any problem, all prefixes (Full BGP table) are announced to the neighbor, of course during this time the CPU goes high up to 80%. Then the both peers are in sync and traffic run as usual, but after some minutes the CPU goes again up to 80% and the debug on the neighbor side shows that it gets again the BGP updates for all BGP prefixes from our 7200 with "rejected - duplicated" comments for every received prefix, it means that it gets the updates for prefixes which are already exists in BGP table.
And it happens every 3-5 minutes. Truly said I can't explain why our 7200 always tries to send the Full bgp table again and again. The work-around was to configure the peer with "soft inbound", it's OK and we'd like to use it anyway , but from my opinion BGP shouldn't send Full BGP table very 5 minutes without "soft inbound" as well.
View 6 Replies
View Related
Nov 12, 2012
It is on my home network. My administrator says I hog the internet. I cannot even update programs
View 6 Replies
View Related
May 10, 2013
Having issue in applying package updates in LMS 4.2.3?
I am getting an error whether going via the GUI or CLI. The key issue appears to be (according to the PSU.log):
[ Sat May 11 16:41:25 EST 2013 ] ERROR [PsuPkg Resolver : pick Unselected BasePackages] :
Consistency check failed for base package SharedSwimRtr800(2.2)
I have the version 2.0.1 of SharedSwimRtr800:
327.SharedSwimRtr8002.0.1SharedSwimRtr800 device package
And I can't seem to find 2.2 anywhere in the downloads section for LMS 4.2
View 7 Replies
View Related
Apr 4, 2011
Just bought three D-Links from abroad ( Canada) and now am in Mauritius. They are brand new and now going to set them up.
1) DIR-825 H/W : B1 F/W : 2.02NA
2) DNS-323 H/W : C1 F/W : 1.09
3) DWA-140 H/w : B2 F/H : 1.50
I already own a Beetel 220BX2 modem. I will be connecting :
1) my PC through the DWA-140
2) three Samsung Galaxy S
3) One LG phone (b/g)
4) Network Player (Yet to be bought)
5) Laptop
What are the steps to follow (Firmware updates, Configurations). I was planning to do VPN and to have each device have its own IP.
View 14 Replies
View Related
Sep 20, 2012
My organization has about 15 workstations, all running XP Pro. Our server is running MS Server 2003.Is there a way to push Security Essentials definition updates to all these machines behind the scenes, rather than having each one download the updates individually?I would like to automate the process, if possible, so that once a week the update file is downloaded from MS update, then applied to all workstations, but I don't know where to begin.
View 6 Replies
View Related
Feb 20, 2013
I have Prime 1.3, two WLC 5508 and 8 switches 2960s I try update my devices through Prime, but I can't.
When I start "Upgrade Analysis" and select switch (Catalyst WS-C2960S-24PS-L) and image (c2960s-universalk9-mz.150-2.SE2.bin) then click to "Run report"
Prime shows me that "Image not Applicable for this Device" I try different images, but it does not work.
And with WLC 5508 the same trouble. Why Prime can't do right analysis and updates devices?
View 6 Replies
View Related
Nov 25, 2012
I have a problem downloading software and device updates for LMS 4.0.1.
In the psu.log I get the following:
[ Mon Nov 26 12:51:51 CET 2012 ] INFO [SwUpdateAction : getUpdatesFromCCO] : Validated Cisco.com credentials..
[ Mon Nov 26 12:51:51 CET 2012 ] INFO [SecurityHandler : getCSProxyHost] : No
[Code].....
View 2 Replies
View Related
Jun 19, 2011
We are a relatively new Cisco partner. We used to work with CDW and now we are buying from distribution and selling directly. We buy a lot of ASA 5505 units from D&H.
My question is, aside from the disc that comes with the unit where do we download the latest firmware image and management software? It appears you have to have a contract ID to get these through the Cisco website. Do we not get "car blanche" access as a Cisco partner to these resources?
Also doesn't the Cisco ASA 5505 at least come with a license for the latest firmware? Many ship with very old software and even old CDROMs.
View 2 Replies
View Related
Jan 23, 2013
I am on my second 3520 Laptop (first one purchsed in November 2012, returned last week) and the same problem is happening. This is that after every Windows Update I am unable to connect to the Internet. Wi-Fi checks out and used by other PC's in the house, I thought I'd cured it recently by being able to go in and sign into Mcafee (22/1) then an update on 23/1 and BAM! No Internet, no way can I get into McAfee to sign in, and the only options are restore to 21/1 (did that still no joy) or back to Factory (23/12/12) and re-install Office 2010 AGAIN! I have spent over £10 in calling the Dell Premium line, I have emailed the Support Director who arranged the laptop swap and still have this problem. I have posted it on Windows 8 forums, other forums I can find, Googled 'No Internet after Windows8 updates' 'till the cows come home, have gone back to Factory about 10 times over the 2 machines, tried to create Restore points myself but they disappear after the updates, all very frustrating. I 'could' get a refund but this is the 6th Dell machine we've had and I like the support. This machine, like 2 others (1 on Vista about to be upgraded to Win7 the other just upgraded) this new one will be used in a church based Debt Advice charity so eventually will be in a cupboard and used every Wednesday by an admin volunteer. It will be a terrible pain to have this trouble as she's not that young nor a PC expert so I need a seamless, invisible solution that will work without a hitch like all updates in XP, Vista and Win7.
View 3 Replies
View Related
Jul 18, 2012
Does cisco provides updates for underlying windows server in ACS SE 1113 ? Patch updates are available for ACS 4.2 , but how can we update underlying windows server , Does patches for ACS is enough to secure underlying windows server .
View 4 Replies
View Related
Aug 15, 2011
We have the RVS4000 and have IPS turned on. How can I be notified (email would work) when updates to the IPS signatures are available, so I can keep our IPS signatures current?
View 3 Replies
View Related
Jun 6, 2011
I have an Actiontek pk5000, and it disconnects wifi every few minutes, I have this computer hooked to ethernet, and it still works, but my macs, and tablets won't connect wirelessly I have rebooted the modem 6 times now, and I get about 5 minutes of internet every time I reboot. I have tried to upgrade the firmware on it, but it says there are no updates for the firmware available for the router.
View 3 Replies
View Related
Apr 5, 2012
I've got a problem with Norton 360 6.0. Everytime it updates its definitions, my internet disconnects and I have to reboot my computer to get it back. However, every time I try to command prompt a ping, it says I'm connected as does my networking center.
View 1 Replies
View Related
Jun 21, 2011
Wireless reception became poor after recent Windows 7 updates.Can't find recent windows 7 64 bit driver for this card.
View 1 Replies
View Related
Dec 31, 2012
Region : UnitedStates
Model : TL-WR841N
Hardware Version : V7
Firmware Version : 3.11.7 Build 100531 Rel. 72021n
ISP :
We received new tablet and smart tv but cannot use them due to connection problems. The tv will not connect to the router and the tablet shows strong router strength but will not connect to the internet. I checked for firmware updates and there are 3. Do I simply install the latest firmware or all 3?
View 1 Replies
View Related
Aug 21, 2011
Is there a document that explains how the configurations are updated to the standby ASA and what needs to be manually added tot he ASA? I have two ASA 5510 running ASA ver 8.3(2) and ASDM 6.4(1). When I add static routes to the primary ASA the routes are not sent to the failover ASA. Is this to be expected or do I have a bug?
View 10 Replies
View Related
Jan 19, 2013
I have an 1841 running Advanced Enterprise Services 12.4(22)T3 that is functioning as a DHCP server and DNS server. What I am trying to figure out how to do is have the DNS service respond to queries about the clients of the dhcp service. I have successfully enabled it as a caching server for other requests, like "google.com" and "cisco.com", but what about the hosts on the local LAN?
As an example, let's say a Windows computer connects to the network with the hostname "computer" and receives an IP address from the 1841 with the domain name "test.net". I would like the 1841 to serve DNS queries for "computer.test.net" with the IP address that it assigned.
View 7 Replies
View Related
Jan 8, 2013
I am trying to get a 1811 to update routes on a 3750x. My static routes are being redistributed to the switch fine, however my connected networks are not My router has Vlan with several subnets attached.
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-FE 2$$ES_LAN$$FW_INSIDE$
ip address xxx.xx.xx7.185 255.255.255.0 secondary
ip address 172.90.0.185 255.255.255.0 secondary
ip address 172.99.0.1 255.255.255.0 secondary
ip address 10.170.10.254 255.255.255.0 secondary
[code]....
A host on the xxx.xx.xx6.0 network cannot ping a host on the 10.10.44.0 network. All ports on the switch and the router are in vlan1
View 3 Replies
View Related
Feb 7, 2013
I've just bought a Cisco RV180W and I am trying to find its newest firmware but I am getting 404 everytime I access or search for this updates.
View 1 Replies
View Related
Mar 6, 2011
When I run the Upgrade software from Cisoc.com Wizard in ASDM i get this error:
You are not authorized to download encrypted software. Please register your self for this service.
CRYPTO_REQUEST_URL
View 1 Replies
View Related
Sep 5, 2012
I've got LACP-enabled port-channels between a Cisco 3750 stack and a few different switches (some Cisco 3750s and some Juniper EX2200s). The Ciscos are all sending slow LACP updates, the Junipers are sending fast LACP updates (but the Cisco they connect with is responding with slow LACP updates).
I have a couple of questions:
1) what are the pros and cons of slow vs fast updates? my research has led me to the conclusion that fast updates are better for network resiliency as long as you have plenty of bandwidth overhead (which I do at the moment). is there anything to add to this conclusion?
2) is there any way to configure the Cisco 3750s for fast updates?
View 3 Replies
View Related
Dec 3, 2012
#1: I have an N300 router and all of my devices (two laptops, one PS3, and one 3DS) connect to the internet just fine. But I'm having a problem when trying to connect to a friend on my 3DS when playing Pokemon Black Version 2. I've never had this problem before I got my N300 router. The 3DS connects to the internet without issue to download updates and shop the Nintendo store, but this in-game connection is not working.
#2: When I started using that same N300 router, suddenly my access to www.omegle.com was severely limited. It's a video chat site on which now I can no longer see the other users' video. Rarely a video will come through, by 90% of the time I just get black screens which I know I shouldn't be getting.
View 1 Replies
View Related
May 25, 2013
I have an N300 (F9K1002v2) and I'd like to know if there are any firmware updates newer than 2.00.08, I've tried flashing firmwares 3, 4, and 5 but they all fail.
View 1 Replies
View Related
Mar 8, 2013
I currently have 2 5505 SEC BUN as Primary/FO Firewalls and I am considering purchasing the ASA5510-AIP10-K9 for use as a dedicated IPS device. Looking at url... I see that for service updates, CON-SU1-AS1A10K9 is available for this product, providing "IPS Signature and Engine Updates" and "OS Updates."
It is my understanding that in the ASA5510-AIP10-K9 there are 2 OS:
1. ASA OS
2. AIP SSM-10 OS
My question is: Are both the ASA and AIP SSM-10 able to receive "OS updates" with this service contract? Essentially, I want to make sure that when I submit by budget, there isn't another contract that I also need.
View 8 Replies
View Related
Feb 11, 2011
I have been trying to get my 851W to work with DDNS for a long while now. In fact I walked away from the problem in frustration and loaded DD Client on a Linux box until I had time to re-visit this. The folks at Zone Edit were not able to offer much with CLI problems.
When I debug DDHS updates I get to a point where the the router tries to resolve the DDNS update address and fails.So I have a number of questions:
a) Is this error the result of lack of DNS server names written to the config?
b) My WAN interface is a DHCP client to my modem. If the DDNS updater does need to resolve a name, shouldn't the DNS server info be provided by the DHCP process for the WAN interface? How do I ensure that name servers are automatically assigned for the DDNS updater to use?
[Code] ........
View 1 Replies
View Related
