Cisco Switching/Routing :: 887W - Google Chrome And Updates Not Working
Nov 1, 2012
I have cisco router 800 series 887 VAW. WiFi is connected to all my devices through this router, i.e., Windows XP, Vista, Wii, Nexus 7 and HTC Desire S. I can access internet from all these devices. The apps which are already downloaded on my Android devices connect to internet, but the bigest problem is here:
1. Google Play does not connect (on both Nexus 7 and Desire S).
2. Chrome does not work on Nexus 7
3. Nexus 7 fails to check for any system update.
4. Fails to sync accounts.
I tried to contact to the company which gave me this router, but they told the problem lies with my tablet. But the tablet works perfectly fine with others networks and Android phone works fine with 3G and other networks.
View 5 Replies
ADVERTISEMENT
Jun 1, 2012
I cant seem to run a proxy in google chrome when i try and run my ip hider program the internet just gets error?
View 1 Replies
View Related
Jul 30, 2012
I am using Chrome as my primary broswer, but recently I can't get access to a particular website, but while I use other browsers to access that site, it is perfectly fast and without any problems at all. I don't know if i have accidentally pressed any key or accepted any setting that has made google chrome to block access to that site.
View 3 Replies
View Related
Apr 14, 2012
Recently i have to change my modem (lightning struck) which of course, done by my ISP worker.The problem is, since then, I've been getting the "DNS lookup failed" error message constantly while using Google Chrome. Or sometimes the "This web page is not available - The connection to [URL] was interrupted".I have to refresh the search once or twice to get to the site, which is very annoying. I tried surfing on my friend's laptop, using the same wireless connection and it seemed to work fine. This problem only occurred on MY laptop.One more thing is, the connection doesn't seem to go wrong because i could play online game with no trouble like lagging or disconnection whatsoever. (Starcraft)
These are the details:
ISP - Streamyx (malaysia)
Broadband - ADSL wireless
Modem - ZyXel p-600 series
Anti-Virus - Trend Micro Titanium Internet Security
Firewall - Windows Firewall
View 10 Replies
View Related
Feb 24, 2013
Is is possible to run Transmission or Google Chrome only using OpenVPN? Other applications should use default connection (eth0) since I am connected to Intranet which won't be accessible if all traffic is routed through VPN. I am using Ubuntu 12.10 and some Premium VPN server (similar to HMS VPN)
View 1 Replies
View Related
Jun 20, 2011
I have just gone through hours of tech support with my ISP and still cannot seem to get online. Problem is the same as recent posts by jerguy1928, with message "DNS lookup failed...." coming up in Google Chrome. Both IE and FF just say cannot connect.Running Windows 7 on laptop. I have tried alt DNS settings (Google and others), all the CMD suggestions, disabling firewalls etc, etc! Other computer in house connects just fine.Ping works fine. Really, there appears to be no reason to not be able to connect - since I am actually connected!
View 13 Replies
View Related
Mar 24, 2011
I can't connect to the internet through Google chrome or explorer, pages simply won't load.
-can't ping the pc from other pc but can ping the modem
- internet shows connected and receiving data
- all connections tight
- internet/wireless modem working fine working fine with my other pc/laptop
- all other programs on the pc seem to work fine
- I have changed no settings on the pc since I last used it and the internet
- I had not used the internet in approx 2 months on the problem pc
- I tried turning off the firewall.
- running XP
View 3 Replies
View Related
May 10, 2012
configuration for wireless on the cisco 887w? i would like wireless and wired users on the same vlan if possible i am trying to bring the radio up but it says reset and down and cant get it to bring it up ( i have done vlan1, ip unmbered vlan1 bit and logged onto ap using service-module wlan-ap0 session command) Also is wpa 2 enterprise possible on the cisco 887 w ( if possible i would like it to authenticate with our acs servers on our main site)
View 8 Replies
View Related
Oct 4, 2012
I created a second VLAN and a second SSID. My problem is that from a PC on the native VLAN 1 I can ping the IP of VLAN 2 192.168.2.254 but I cannot ping any other device that has connected to the second SSID. How do I get routing to work between the two VLAN? I thought it would be automatically setup when I created the second VLAN using Cisco Configuration Professional?
View 3 Replies
View Related
Jan 19, 2013
I have an 1841 running Advanced Enterprise Services 12.4(22)T3 that is functioning as a DHCP server and DNS server. What I am trying to figure out how to do is have the DNS service respond to queries about the clients of the dhcp service. I have successfully enabled it as a caching server for other requests, like "google.com" and "cisco.com", but what about the hosts on the local LAN?
As an example, let's say a Windows computer connects to the network with the hostname "computer" and receives an IP address from the 1841 with the domain name "test.net". I would like the 1841 to serve DNS queries for "computer.test.net" with the IP address that it assigned.
View 7 Replies
View Related
Jan 8, 2013
I am trying to get a 1811 to update routes on a 3750x. My static routes are being redistributed to the switch fine, however my connected networks are not My router has Vlan with several subnets attached.
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-FE 2$$ES_LAN$$FW_INSIDE$
ip address xxx.xx.xx7.185 255.255.255.0 secondary
ip address 172.90.0.185 255.255.255.0 secondary
ip address 172.99.0.1 255.255.255.0 secondary
ip address 10.170.10.254 255.255.255.0 secondary
[code]....
A host on the xxx.xx.xx6.0 network cannot ping a host on the 10.10.44.0 network. All ports on the switch and the router are in vlan1
View 3 Replies
View Related
Sep 5, 2012
I've got LACP-enabled port-channels between a Cisco 3750 stack and a few different switches (some Cisco 3750s and some Juniper EX2200s). The Ciscos are all sending slow LACP updates, the Junipers are sending fast LACP updates (but the Cisco they connect with is responding with slow LACP updates).
I have a couple of questions:
1) what are the pros and cons of slow vs fast updates? my research has led me to the conclusion that fast updates are better for network resiliency as long as you have plenty of bandwidth overhead (which I do at the moment). is there anything to add to this conclusion?
2) is there any way to configure the Cisco 3750s for fast updates?
View 3 Replies
View Related
Nov 6, 2012
We have several DMVPN-connected sites that are connected to our 2821 ISR pair.They're all configured as eigrp stub connected summary. Yesterday, a few of the sites went inaccessible, but the VPN tunnels were still up and running. Upon further investigation, we noticed that the remote sites stopped receiving routing updates from our 2821's. As a quick fix, we added static routes to bring the sites back up.Later that night, we removed the static routes and cleared the eigrp neighbors, hoping it would fix the problem. When it didn't, we cleared them two more times.Suddenly, the router lost all downstream adjacencies. While we were adding statics to at least bring the sites back up, all of the adjacencies came back.
View 2 Replies
View Related
Nov 12, 2012
It is on my home network. My administrator says I hog the internet. I cannot even update programs
View 6 Replies
View Related
Sep 25, 2012
We have currently LMS 3.2 installed. We know have some new switches C2960-48PST-L that are not supported in CiscoView and Common Services.When trying an update in Software Center | Device Update, we receive an error message:Error while downloading package information from Cisco.com for the selected products. See the C:/PROGRA~1/CSCOpx/log/psu.log file for details.
The psu.log file shows the following:
[ Wed Sep 26 14:33:15 CEST 2012 ] INFO [SecurityHandler : getCSProxyLogin] : No proxy User Name configured
[ Wed Sep 26 14:33:15 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Wed Sep 26 14:33:24 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Wed Sep 26 14:33:24 CEST 2012 ] INFO [SecurityHandler : getCSProxyPort] : No proxy port confgured
[ Wed Sep 26 14:33:26 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Wed Sep 26 14:33:26 CEST 2012 ] INFO [SecurityHandler : getCSProxyPort] : No proxy port confgured
[code]....
View 2 Replies
View Related
Apr 19, 2011
i share internet with my neighbor (we split the bill) and every so often like in the last 2 days, and usually not again for another 3 weeks for 2-3 more more days each time, am not able to browse(ff, chrome, ie) or use windows live messenger, but yet if i turn on bittorrent, the downloads are fine, the trackers don't update, but DHT and peer exchange update fine.And also, i can get on Gameranger (which uses UDP port 16000) and play games, and this happens to all 5 computers on the network, (4 wireless at my house[3 XPs 1 Win7] and one wired at her house[Win 7]), so it's not something on the computer, also, usually when i check my router the subnet is usually 255.255.255.0 but this morning before i came to work i noticed it was 255.0.0.0 , not sure if that matters, this has been happening for months, usually between every 3-4 weeks, we have no browser and msn use for 2-3 days?
View 1 Replies
View Related
Aug 25, 2012
My google search has recently stopped working in both IE and firefox. When i search bing or yahoo they work just fine. I have tried using google.com an also tried using the toobar on my computer.
View 6 Replies
View Related
Jun 17, 2012
I'm using my iPhone to write this, because any other site that's not google just ends up as a blank white screen!Internet connection is 5 bars, and I tried cable and changing DSN servers.
View 4 Replies
View Related
Sep 24, 2011
The issue that I have is around getting second SSID work on my router! So I have created two Vlans, 30 & 200. Vlan 200 is the native and is associated to SSID "Bitter". This SSID works like a charm however the other Vlan cannot be even pinged from router side the ip that I tried to ping is 192.168.30.1. I have posted the config below. Also i tried to brak wlan-gig into sub interfaces but the IOS does not accept that!
Vlan 30 >>>RadioDot 11 0.30>>>>Gigabit 0.2>>>>bridge group 2
Vlan 200>>RadioDot 11 0.200>>>Gigabit 0.1>>>>bridge group 1 (native Vlan)
Router side:
ip source-route
!
!
!
ip dhcp excluded-address 10.10.10.1
[Code]...
View 1 Replies
View Related
Oct 15, 2010
I just received a 887W and would like to setup using the SDM.I don't know and cannot find the default IP.
View 7 Replies
View Related
Jun 9, 2011
My computer won't connect to any of Google's servers. ANY of them. Gmail, docs, reader, nothin. I can visit youtube, but I cannot get to the log-in page. EVERY other site works pretty well. Heck, even using a site that uses a Recaptcha it doesn't load the recaptcha!Nothing wrong with my hosts file.
Tracert results in 6 successful hops and then times out (I think at my ISP?)
the last 2 successful hops are
chnddsrj01-ae2.0.rd.ph.cox.net
And then
langbprj02-ae2.rd.la.cox.net
Then all time outs
My other PC is connected to the SAME wifi network right now, and I'm posting from it, and it works fine. Both are on XP. Reboots haven't worked. Happens on all browsers. Every other website I can find is just fine.
View 9 Replies
View Related
Oct 8, 2011
I recently installed a new Cisco 887W router @ my place and everything is working like a charm but the Macbook Air! The devices that are working currently are: iPhone, iPad, HP laptop, Nokia mobile phone.I have checked two Macbook Air so far and both have the same problem with the wireless network! I even manually added the SSID to "Airport Preferred network setting" but still couldn't make it to work!So the issue is the Macbook Air can detect the SSIDs intermittently however when it detects the SSID it doesn not connect to the wireless network and it comes up with the error of "connection timeout". I have used the command "show dot11 association" to see if the Macbook air will be detected on the router side unfortunately that was in vain. The setting that I have on the router under SSID is "guest-mode" i.e. it broadcasts the SSID, security is WPA 2 with AES encyrption.
View 3 Replies
View Related
May 21, 2013
I have a Cisco SG 300-20 as the core switch, layer 3. It is 192.168.4.6 on VLAN1 and 192.168.5.1 for VLAN2 (VOIP). All the ports are set in trunk mode. DHCP relay is setup on this switch.
The phones connected into a layer 2, Catalyst 2960-S switch. All ports are set in trunk mode. Default gateway on it is set to 192.168.5.1.
DHCP for both VLANs is provided by a Windows Server 2008 R2 server (the relay IP 192.168.4.15).
There is also an ASA 5510 in the mix which is 192.168.4.1. It has a route added to it for the 192.168.5.0 network to go to the SG 300 (192.168.5.1).
Just the two switches can ping each other on the 192.168.5.x network when I "add vlan 2" to the trunk port that is connected between the SG 300 and the 2960. The phones don't get DHCP on the 2960 switch. And I cannot ping 192.168.5.x from the ASA or anything else on the 192.168.4.x network.
After a bit of reading on intra-vlan routing for the SG 300 switch, I am thinking the SG 300 has to be the "center" of things so I need to make it 192.168.4.1 to be the gateway for both VLANs and change the ASA to 192.168.4.2 for VLAN1, etc. And I really can't do asymmetric routing with this switch.
View 1 Replies
View Related
Nov 23, 2011
I am using a cisco 3750 in my network as a gateway, and above it I use a squid machine for caching my internet. My network is like this:
Basically I have two VLANs on my network which are VLAN10 and VLAN100, VLAN10 is the cooperate network of my office. VLAN100 is the management VLAN which i use for the switches. I keep the squid as well the client in VLAN10.
squid (192.168.1.50)---->cisco 3750(192.168.1.123)---->Distribution Switch(cisco 2960)---->client PC (192.168.1.5)
I have done nating on squid and internet is working pretty fine when I use the client gateway as the squid, but when I use the cisco 3750 as my gateway after adding route maps for forwarding the internet traffic coming to the cisco 3750 to squid it disconnects me from internet as well I cannot even reach the switches from the corporate network. These are the only Lines I used for the routing:
!
route-map proxy-redirect permit 10
match ip address 110
[Code]......
View 6 Replies
View Related
Jan 3, 2012
My network is like this:
Cisco 3750 (Core Switch)-----> Cisco 2960 (Distribution Switch)-----> Client (PC, Laps, Printers…etc)
Basically I have 3 VLAN’s. Office VLAN (for cooperative usage) which is VLAN 999 which has a defined IP address of 192.168.1.123 and Guest VLAN (for the guests who visits our hotel, most of it are wifi AP’s) VLAN 20 which has an IP address of 10.172.4.1. All these SVI are defined on the core switch.
Is there any way I can introduce a new VLAN lets say VLAN 40 and use PBR to route the packets going to VLAN 40 in the IP range 192.168.1.x to VLAN 999 and 10.172.4.1 to VLAN 20? I have tried this already and it is not working. Here are the configurations I have used.
Access-list 110 permit ip 10.172.4.0 0.0.0.255 any
access-list 120 permit ip 192.168.1.0 0.0.0.255 any
route-map INT_RVLAN permit 10
match ip address 120 110
set ip next-hop 192.168.1.123 10.172.4.1
interface VLAN 40
ip policy route-map INT_RVLAN
Where have I gone wrong?
View 8 Replies
View Related
Jul 8, 2012
MY ISP installed one router in my lab.for internet connectivity they mail me steps :connect your Laptop directly to gi0/3 port to check internet connectivity with public ip 1.1.1.x and Gateway 1.1.1.1 with subnet mask 255.255.255.240 after connection I surprised because I am able to access only google sites like gmail,google search etc. but I am able to ping/traceroute all sites.from browser I am able to access only google sites only.In Router no firewall no such access list.
View 2 Replies
View Related
May 2, 2012
I want to police the traffic coming from host 10.0.0.10 that is connected to another switch via port-channel interface the port-channel have interfaces G2/049 and G2/0/50 , i have applied below config to the SVI 112 but this is not working, as the host is still able to go beyond the policed rate also in the "sh policy-map interface vlan 112" command everything is showing 0(zero).
class-map match-all CM_FTP_PORT_49
match input-interface GigabitEthernet2/0/49
class-map match-all CM_FTP_PORT_50
[Code]......
View 4 Replies
View Related
Mar 10, 2013
We bought a 3560 PoE switch to replace tons of PoE-injectors but when connecting the devices our logs were flooded with
Mar 11 15:09:20.725: %ILPOWER-7-DETECT: Interface Fa0/7: Power Device detected: IEEE PD
Mar 11 15:09:20.725: %ILPOWER-5-INVALID_IEEE_CLASS: Interface Fa0/7: has detected invalid IEEE class: 7 device. Power denied
Mar 11 15:09:20.968: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/8, changed state to down
Mar 11 15:09:20.985: %ILPOWER-7-DETECT: Interface Fa0/7: Power Device detected: IEEE PD
Mar 11 15:09:20.985: %ILPOWER-5-INVALID_IEEE_CLASS: Interface Fa0/7: has detected invalid IEEE class: 7 device. Power denied
While the message seems quite clear im wondering if there's any workaround on the problem?
View 13 Replies
View Related
Jul 16, 2012
We are setup like a hotel style workers camp. We have wings full of rooms and residents with 3750 stacks in them. Those switches connect back to our core 6500's. The network is mostly all Layer 3, interfaces are routed with IPs.
When it was built before my time they included an ACL for each wing so that residents couldn't access internal devices (IE SSH to 6500) but I've come to notice it's not working.
I see hits on the ACL for accepts but nothing is hitting the deny rule at the top.Here is the configuration below:
mls qos aggregate-policer INTERNET1 24000000 80000 80000 conform-action transmit exceed-action drop
mls qos aggregate-policer INTERNET2 24000000 80000 80000 conform-action transmit exceed-action drop
mls qos aggregate-policer INTERNET 24000000 80000 80000 conform-action transmit exceed-action drop
[Code] ....
View 5 Replies
View Related
Jun 7, 2013
My network card do not work i am sending you the output.
View 7 Replies
View Related
Mar 14, 2013
I have created a PBR in 3650 switch to route traffic from a specific IP address to a specific next hop or IP address(Router)
ROM: Bootstrap program is C3560 boot loader
BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE (fc1)
SW1 uptime is 6 weeks, 2 days, 16 minutes
System returned to ROM by power-on
[Code]....
View 6 Replies
View Related
Jun 4, 2012
I have an switch 2960 and i have made an SSH connection . But the problem is that whenever i try to open with my teraterm or putty it ask for username and after that password but does take the password. It shows an error of password what should be the problem.
Commands that i entered to make SSH
config# username admin password pankaj
config# ip domain-name home.local
config# crypto key generate rsa
config# 1024
config# ip ssh version 2
View 6 Replies
View Related
Jun 4, 2012
I have an switch 2960 and i have made an SSH connection . But the problem is that whenever i try to open with my teraterm or putty it ask for username and after that password but does take the password. It shows an error of password what should be the problem.
View 1 Replies
View Related