Error Message In Google Chrome - DNS Lookup Failed
Jun 20, 2011
I have just gone through hours of tech support with my ISP and still cannot seem to get online. Problem is the same as recent posts by jerguy1928, with message "DNS lookup failed...." coming up in Google Chrome. Both IE and FF just say cannot connect.Running Windows 7 on laptop. I have tried alt DNS settings (Google and others), all the CMD suggestions, disabling firewalls etc, etc! Other computer in house connects just fine.Ping works fine. Really, there appears to be no reason to not be able to connect - since I am actually connected!
View 13 Replies
ADVERTISEMENT
Dec 31, 2012
Whenever I try to goto a webpage within any browser,despite me being connected to my network(though 1 received packet to every 20 or so sent packet ratio) it tells me that DNS lookup failed. I had a similar issue on my other pc that I use more often,though connecting through WIFI momentarily resolved the issue,before I returning to wired,where everything has been fine. My other pc however has no wifi adapter. So ive been stuck.
View 12 Replies
View Related
Aug 28, 2011
whenever i open chrome or anything i get DNS Lookup failed.
View 11 Replies
View Related
Jun 1, 2012
I cant seem to run a proxy in google chrome when i try and run my ip hider program the internet just gets error?
View 1 Replies
View Related
May 26, 2011
I am unable to connect to the internet on my desktop computer. The error message I receive is" Download failed(12007) The sever name or address could not be resolved" I am running windows 7. Hooked up to att uverse. My laptop is working as you can see by sending this message. I have been trying to fix this problem for the last 2 days to no avail. I uninstalled norton hoping it was a firewall problem. On the local area connection it shows IPV4 connedtivety: No Network access.
View 2 Replies
View Related
Jul 30, 2012
I am using Chrome as my primary broswer, but recently I can't get access to a particular website, but while I use other browsers to access that site, it is perfectly fast and without any problems at all. I don't know if i have accidentally pressed any key or accepted any setting that has made google chrome to block access to that site.
View 3 Replies
View Related
Apr 14, 2012
Recently i have to change my modem (lightning struck) which of course, done by my ISP worker.The problem is, since then, I've been getting the "DNS lookup failed" error message constantly while using Google Chrome. Or sometimes the "This web page is not available - The connection to [URL] was interrupted".I have to refresh the search once or twice to get to the site, which is very annoying. I tried surfing on my friend's laptop, using the same wireless connection and it seemed to work fine. This problem only occurred on MY laptop.One more thing is, the connection doesn't seem to go wrong because i could play online game with no trouble like lagging or disconnection whatsoever. (Starcraft)
These are the details:
ISP - Streamyx (malaysia)
Broadband - ADSL wireless
Modem - ZyXel p-600 series
Anti-Virus - Trend Micro Titanium Internet Security
Firewall - Windows Firewall
View 10 Replies
View Related
Feb 24, 2013
Is is possible to run Transmission or Google Chrome only using OpenVPN? Other applications should use default connection (eth0) since I am connected to Intranet which won't be accessible if all traffic is routed through VPN. I am using Ubuntu 12.10 and some Premium VPN server (similar to HMS VPN)
View 1 Replies
View Related
Oct 24, 2012
Upon checking the logs, I'm seeing a lot of these messages:
*emWeb: Oct 25 14:11:01.345: #LOG-3-Q_IND: spam_lrad.c:10136 Validation of STAT_PAYLOAD failed - AP 00:3a:98:09:4e:d0
Always the same MAC address, which I assume is a Cisco AP trying to join. The output interpreter/message decoder isn't much useful. 5508 Controller running ver 7.3.101.0.
View 11 Replies
View Related
Mar 24, 2011
I can't connect to the internet through Google chrome or explorer, pages simply won't load.
-can't ping the pc from other pc but can ping the modem
- internet shows connected and receiving data
- all connections tight
- internet/wireless modem working fine working fine with my other pc/laptop
- all other programs on the pc seem to work fine
- I have changed no settings on the pc since I last used it and the internet
- I had not used the internet in approx 2 months on the problem pc
- I tried turning off the firewall.
- running XP
View 3 Replies
View Related
Nov 1, 2012
I have cisco router 800 series 887 VAW. WiFi is connected to all my devices through this router, i.e., Windows XP, Vista, Wii, Nexus 7 and HTC Desire S. I can access internet from all these devices. The apps which are already downloaded on my Android devices connect to internet, but the bigest problem is here:
1. Google Play does not connect (on both Nexus 7 and Desire S).
2. Chrome does not work on Nexus 7
3. Nexus 7 fails to check for any system update.
4. Fails to sync accounts.
I tried to contact to the company which gave me this router, but they told the problem lies with my tablet. But the tablet works perfectly fine with others networks and Android phone works fine with 3G and other networks.
View 5 Replies
View Related
Mar 11, 2013
I been having trouble with my pc ... it looks like it wants to load the page and takes forever and then it says DNS lookup failed ... sometimes it loads but I have to keep trying until it does load.. It's a Windows XP
View 9 Replies
View Related
Sep 26, 2012
So I just got a new Acer ultrabook and it was working fine until a few days ago. It keeps saying the DNS lookup failed. I've tried everything I can. I made sure it wasn't chrome, doesn't work in Firefox. Reset the modem, did a DNS dump, set the DNS to a 888thing. Utorrent is connecting to the internet fine and I can connect for random periods of time. If I do trouble shoot over and over eventually it starts working. Everyone else in my house gets internet even my sister with the same computer and model.
View 14 Replies
View Related
Oct 24, 2011
dns lookup failed, on all web browser (IE, Google, Firefox). I did ip and winsock reset, did networking ins safe mode, it will ping my ip address but will not ping any other address. My computer (running Vista home premium) says that I have internet access but it does not work. This happened on one computer and then on another one about 6 days later and they both are wired to a router.
View 4 Replies
View Related
Oct 13, 2011
My WLAN has been working fine for the past 6 months. Recently it started connecting and disconnecting itself. ANd now it will only connect to the network but wont give internet access. I can connect to the same router using an ethernet cord. And I can connect to the wireless network using my phone or other computer. There are no driver updates for my network adapter, and I tried reconfiguring the router. That worked for a short period of time, but now I have the same issue. I tried a system restore back to before a recent virus software update to see if maybe that update was causing the firewall to block something.
View 14 Replies
View Related
Feb 15, 2013
Well first of all id say im pretty good at these types of things as they have happened to me so many times. But i cant figure this one out. Yesterday my internet just went out. All of the lights on the modem are still on everything says it should be connected but just doesnt work. When i try to open webpages it says DNS Lookup failed. Called tech support they are sending me a new modem atm, but i have 2 other ones around that i have tried and they say that im connected to the internet, but nothing same lookup error and everything so i do not think it is the modem. Flushed dns, manually entered the isps dns , Dont know what else to try at all.
View 14 Replies
View Related
Jun 3, 2011
Iv had this problem with two wireless repeaters now. when im connected to just the router, i am able to access the internet. however when i plug in and set up the wireless repeater ( the latest one is a amped wireless sr300) it works for a few min and then i get a "DNS lookup failed" when trying to access sites. this repeater replaced a hawking hwren1. which would work for a few min and then lose the network.i believe this is a problem with our internet connection into the house, but could it be a caused by the router? (wrt400n) our isp says its not their problem and that its our router, but this is the 4th one in under a year.
View 2 Replies
View Related
Dec 20, 2011
I have a Windows XP laptop and a Windows 7 desktop. The desktop has no wifi support, I had built it myself. To get internet on my desktop (used for games), I had connected my laptop to the pc, and the laptop picked up wifi from my AT&T gateway in another part of the house. ( I can't move the gateway currently) I have been wanting to connect the desktop to a router/repeater/bridge that would pick up my gateway signal, therefore eliminating the use of the laptop. I also have an Xbox right next to the pc, so I din't want to get an adapter because then I would have to purchase two, so I picked up a a wireless n router with 4 ethernet ports. ( then I could connect both systems using 2 ethernet cables) [URL] I knew when purchasing the router that it had repeater/bridge support. Currently, I have it configured as a wifi bridge. I can connect to it via my laptop, on the wireless networks page, it shows my gateway signal, and the bridge/router, so I connect to the router. It says I have excellent connection, but I can't connect to the internet? Using Google Chrome, it says DNS lookup failed. I can't get on any website, only the router's config page, which is 192.168.1.1. I also connected the router to my pc, and when troubleshooting it says DNS server not responding, may be non existant or incorrect?
View 4 Replies
View Related
Dec 22, 2012
I've been having an issue with my internet connection, which has been getting a lot worse over the past 1 month. I purchased the WRT120N about a year and a half ago, and occasionally observed dropped connections, but it was no big deal. Over teh past month or so, however, it seems like I get the "DNS lookup failed" error about every 15-30 minutes. Every time, I have to disconnect and reconnect my computer to my router. In addition, I will be disconnected from XBox Live. This problem may occur every 5 minutes or every few hours.
I have updated the firmware on the router. I have reset the router, and have reset DNS 1 t0 8.8.8.8 and DNS 2 to 8.8.4.4. THe network is configured as a DHCP. The X-Box has a wired connection, and my laptop experiences this problem whether I use a wired connection or a wireless one.
View 2 Replies
View Related
Aug 31, 2012
On a 5500 series WLC I see I have an issue where peap clients get randomly disconnected with these errors
MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:444 Max EAPOL-key M1 retransmissions exceeded for client 24:77:03:35:79:34
AAA-6-ARP_LOOKUP_FAIL: radius_db.c:3232 Default gateway arp lookup failed.
aaaQueueReader: Aug 31 19:12:14.938: %AAA-4-RADIUSMSG_SEND_FAILED: radius_db.c:3567 Unable to send RADIUS message to
View 7 Replies
View Related
Feb 12, 2011
I've tried to upgrade firmware through chrome, but chrome abruptly shut down during upgrade.Since that, I have not even loggin set-up menu which should be shown up putting 192.168.0.1 to make it back. Amber light is just blinking on Power lamp.
View 2 Replies
View Related
Nov 17, 2012
My wireless internet at uni is showing up with two errors, when its connected it will come up saying that there is an ip address conflict then it will work for a short time then show this message when I try to load a webpage:The server at Google can't be found because the DNS look-up failed. DNS is the network service that translates a website's name to its Internet address. This error is most often caused by having no connection to the Internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing*Google Chrome*from accessing the network.
View 13 Replies
View Related
Jul 7, 2011
whenever I start downloading any large file I start getting DNS lookup errors from Chrome. I can still download the file and even connect using TeamViewer so I am still connected to the internet is some fashion. My roomate is connected to the same network wirelessly and has not had the issue yet. I am currently connect directly to the router which a Belkin.
View 5 Replies
View Related
Jan 19, 2012
I am having Cisco 3845 series router with c3900-universalk9-mz.SPA.151-4.M2.bin IOS . I want to install new Licence on it for DATA. When i am trying to install licence on it i am facing the error "% Error: License installation failed with error: XML parsing failed".
View 4 Replies
View Related
Jan 16, 2013
When downloading files using chrome I keep getting "unknown network error" before the download is complete. Why is this happening and what can I do about it? I am using vista on an acer aspire 5535 laptop. I tried using internet explorer a few times instead but it has also happened there.
View 1 Replies
View Related
Aug 1, 2012
canon pixma MX 715 network set up failed X P home edition
View 1 Replies
View Related
Aug 1, 2012
Two Vlans (ID1 and 100)are on a Cat 4500, which connects to an ASA, interface DMZ. On 4500, there is default route point to the ASA DMZ interface Issue, server on vlan 100 cannot ping a server on Vlan 1, vice verse. When I enable the realtime log, it gives me a “Translation creation failed” message, please see the attached files.
View 1 Replies
View Related
Mar 23, 2012
I have a stack of Catalyst 3750E switches.
IOS image :c3750e-ipbasek9-mz.122-55.SE3.bin
I have been seeing multiple occurance of the below message in the switch logs.
"Failed to send hrpc non blocking message"
I could not find a relevant reference for this message in the Cisco.com.
View 4 Replies
View Related
Aug 6, 2012
I have a pair of 3750E-24PD-S stacked together, it seems after stacked together the stacked switch always flood the console screen with these messages which are not true: [code] Switch-2 is the stack member, Switch-1 is the stack master. The RPS fan failed refers to RPS2300 or the internal power supply of 3750E? Even when I turned on the RPS2300 the stacked switch still display the messages. Also I have two RPS2300 serving stack master and stack member respectively both RPS2300 were switched off why the messages only refer to Switch-2 and not Switch-1? [code]
View 1 Replies
View Related
Feb 20, 2011
i am attaching the image which i recieved last night when i was assigning the IP but i got the error message which does not resembel to IP conflict error messsage
View 1 Replies
View Related
Aug 6, 2012
Sometimes, either browsing from my computer, iPad or iPhone, I sometimes get a "can't connect to server" error, and it's not just a few forums here and there, it is a lot of them. But if I give them 5 or 10 minutes they will come. Imkmow that this isn't a normal up issue with sites servers actually being down. I thought it was a Google chrome issue, but it's been happening on safari. It hasn't started till we switched our Internet plan to 3mbps and a new router.
View 19 Replies
View Related
May 12, 2012
I keep dropping off my internet connection and getting this error.
View 11 Replies
View Related
Sep 30, 2012
After making some physical changes to my home network (which had been running for sometime without incident) my desktop machine stopped (home built MSI X58 Platinum MB) talking to the network. I get "media not connected" even though I am connected, and the connection works for any other computer I attach. I get indication of proper physical connection at both ends (router and computer ethernet port), however I get no connection and the default 169 .... IP address. It does not matter if I create a fixed IP address in the router and set the ip address of the port to correspond. I have tried all the ip resets, stack resets, remove and reinstall the network ports, etc., to no avail. Connecting directly to the cable modem did not work. I even installed a new buss ethernet card with its own drivers and I get the same 'media not connected'.
View 3 Replies
View Related
