Network IP Error Message?

Feb 20, 2011

i am attaching the image which i recieved last night when i was assigning the IP but i got the error message which does not resembel to IP conflict error messsage

View 1 Replies


ADVERTISEMENT

Error Message - Network Password Needs To Be 40 / 104 Bits Depending?

Apr 24, 2012

So I have an issue with getting a laptop hooked onto the router signal. The router is a brand spankin new Linksys EA4500 and the laptop is an IBM which is running Win XP (not sure of SP version as it is a customer's comp. at a hotel I run). Anyway, the error message I am encountering is:The network password needs to be 40 bits r 104 bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal charactersAt first I thought is was my router password since it contained a $ symbol so I changed it to only letters and numbers but still didn't work. I have never encountered this error message on any laptops and no other rooms have been affected.

View 2 Replies View Related

TP-Link TD-W8960N / Connecting To Wireless Network Loops But No Error Message?

May 7, 2011

My roommate has just gotten a second hand laptop and he's trying to connect it to the Wireless network so that he can browse the internet from his room.However, although all the settings are correct, attempting to connect to the network loops.It comes up showing the Wireless Networks available, I select the network and click connect, it then asks for the encryption key. I enter the key and hit connect again, it comes up with the 'Connecting' pop-up and then loops back to the Available Networks screen again.There are no error messages, it just goes back to the starting screen and it hasnt connected.The Laptop in question is a Lenovo T60 with a Intel PRO/Wireless 3945ABG card.The router is a TP-Link TD-W8960N.

View 5 Replies View Related

Netgear WNR612 Wireless Router - Network Error Message Saying Windows Has Detected IP Address Conflict

Jan 5, 2013

I have a Netgear WNR612 wireless router, which worked fine for a few weeks. Then something happened and I can't keep the connection anymore. It happened right after I used iTunes to update my iPhone, perhaps a coincidence, but I'm mentioning that just in case. Internet still works fine with ethernet cable straight from the computer, only the wireless connection doesn't work. This happened about a month ago and I haven't been at home much to fix the problem. I have turned off and unplugged everything for several days at a time while gone. I get a Network Error message saying, Windows has detected an IP address conflict. I have tried restoring the router back to factory settings and reinstalling the wireless card. I have tried changing the IP address settings both in the Network and Sharing Center and the router admin page. What I think I should do is change the IP address in Command Prompt, but when I type "ipconfig /release", it says "No operation can be performed on Wireless Network Connection 2 while it has its media disconnected" and the same for Local Area Connection. I don't understand what this means, because there is a wireless key in my keyboard and there is a white light (not orange) like there should be. Also in the Network and Sharing Center, I can see that the connections are enabled.

View 14 Replies View Related

Error Message / Can't Connect To Server

Aug 6, 2012

Sometimes, either browsing from my computer, iPad or iPhone, I sometimes get a "can't connect to server" error, and it's not just a few forums here and there, it is a lot of them. But if I give them 5 or 10 minutes they will come. Imkmow that this isn't a normal up issue with sites servers actually being down. I thought it was a Google chrome issue, but it's been happening on safari. It hasn't started till we switched our Internet plan to 3mbps and a new router.

View 19 Replies View Related

Error Message / Default Gateway Not Available

May 12, 2012

I keep dropping off my internet connection and getting this error.

View 11 Replies View Related

Error Message - Media Not Connected

Sep 30, 2012

After making some physical changes to my home network (which had been running for sometime without incident) my desktop machine stopped (home built MSI X58 Platinum MB) talking to the network. I get "media not connected" even though I am connected, and the connection works for any other computer I attach. I get indication of proper physical connection at both ends (router and computer ethernet port), however I get no connection and the default 169 .... IP address. It does not matter if I create a fixed IP address in the router and set the ip address of the port to correspond. I have tried all the ip resets, stack resets, remove and reinstall the network ports, etc., to no avail. Connecting directly to the cable modem did not work. I even installed a new buss ethernet card with its own drivers and I get the same 'media not connected'.

View 3 Replies View Related

Wireless Configuration Error Message?

Jan 2, 2012

OS: Windows 7 Home Premium -- Service Pack 1, 64-bit
Browser: IE 9
Computer: Dell Studio 1745

I am receiving an error message window titled "Wireless Configuration" with the following message:

"OLE initialization failed. Make sure that the OLE libraries are the correct version."

I cannot find anything about updating OLE libraries in Windows 7. I have not installed any new software, and my computer is barely 2 years old. I do not find it a coinicidence that my free Dell tech support expired last month, and now I'm having issues with the Dell wireless card.

View 6 Replies View Related

Primary DNS Server Error Message?

Jan 30, 2012

My laptop will not connect through my router anymore. I'm getting the message ( Cannot communicate with Primary DNS server (192.168.1.254). It works fine with an ethernet cable. I have a WII that uses the router also and I can watch a Netflix movie on it so the router seems to be working. My desktop computer is working fine through a DSL connection. The laptop is a Gateway and is running Vista.

View 14 Replies View Related

Cisco WAN :: C2960 Error Message With A New IOS?

Aug 2, 2011

I’m deploying new images on my switch 2960 24TT L. After installing the new image (c2960-lanbasek9-mz.122-58.SE1.bin) and reboot the switch I have always this error message : “Error loading "c2960-lanbasek9-mz.122-58.SE1.bin"
 
Interrupt within 5 seconds to abort boot process.
Loading "flash:/c2960-lanbasek9-mz.122-58.SE1.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ ”
 
But the switch still boot well. Why do I have this error message?

View 6 Replies View Related

Cisco :: LMS 4.0.1 Backup Error Message

Jun 24, 2012

LMS installed on Windows 2003. Backup fais with message "Backup failed.ERROR(1297): Fatal error: Database engine 'UPMDbEngine' could not be started on database 'upm' in Bulk mode.."
 
dbbackup.log attached.

View 9 Replies View Related

Servers :: Cannot Set Time Through Command - Getting Error Message?

May 22, 2011

After setting thru set time command, error message is display on server 'synthetic time issued'.

View 2 Replies View Related

Send Email Get Error Message Ox800CCC69?

Nov 19, 2012

Server Error: 550 emails blocked from send.

View 1 Replies View Related

Wireless :: Error Message - Cannot Communicate With Scanner

Sep 25, 2011

i keep getting an error message when i scan. error message: cannot communicate with scanner for these reasons

-scanner is turned off

-scanner is disconnected (it is disconnected from LAN, if using on LAN)BUT MY MACHINE IS ON

View 3 Replies View Related

Wireless :: Error Message Cannot Find Server DNS

Feb 25, 2013

Sylvania Smartbook synet7wic-bk cannot get online. It shows my wifi is on, but I do not have a tab for wifi information, to put my info in it.

View 2 Replies View Related

Cannot Access PC In LAN - Get Error Message Logon Failure?

Jan 22, 2013

I have three PCs in my lan. (A, B & C).I can access shared drives of B & C from A

I can access shared drive of A from C but cannot access B from C

I can access shared drive of C from A & B.

I get error message "Logon failure: the user has not been granted the requested logon type at this computer".

All the systems are Win 7, A & B are desktop and C is a laptop.I added the C's name in A's "Security Settings -> Local Policies -> User Rights Assignment -> Access this Computer from the Network" too. Still can't access.

View 1 Replies View Related

Error Message - Wifi Adapter Cannot Be Found

Sep 10, 2012

even after installing t driver,i'm getting t same error message.Wifi adapter cannot be found

View 1 Replies View Related

Error Message On All Browsers - DNS Lookup Failed

Dec 31, 2012

Whenever I try to goto a webpage within any browser,despite me being connected to my network(though 1 received packet to every 20 or so sent packet ratio) it tells me that DNS lookup failed. I had a similar issue on my other pc that I use more often,though connecting through WIFI momentarily resolved the issue,before I returning to wired,where everything has been fine. My other pc however has no wifi adapter. So ive been stuck.

View 12 Replies View Related

D-Link DIR-601 :: 6rd Config - Error Message - Invalid IP

Jul 12, 2011

Does 6rd working on the DIR-601?

For example if I enter the Comcast 6rd parameters:

6rd IPv6 prefix 2001:55c:: /32 6rd border relay IP address 69.252.80.66

I then click on "Save Settings".  Now I get a pop up message that says "Invalid IP address" I'm running firmware 1.02NA

View 7 Replies View Related

Cisco :: CSM 4.0 Error Message When Connecting Client

Sep 5, 2012

tying to connect CSM client to CSM server (ver 4.0) and getting attached error message. The server is running, no errors reported while installation, all services are up and fine. I tried to install client locally on the server and connect it that way with no luck. CSM server runs on Win 2008, firewall disabled.

View 0 Replies View Related

Cisco WAN :: ASR 1002 Memory Error Message

Dec 21, 2010

As soon as I connected my ASR 1002s to the Internet and digested the Internet BGP table, I began receiving this message.  I’ve google’d and turned up nothing so far.  I assume I need to allocate more memory to this process.

%PLATFORM-4-ELEMENT_WARNING: R0/0: smand:  ESP/0: Committed Memory value 312% exceeds warning level 310%
 
Here's a sh mem:
 
#sh mem                Head    Total(b)     Used(b)     Free(b)   Lowest(b)  Largest(b)Processor   3008A008   1758530508   647878488   1110652020   1110104020   1109994164lsmpi_io   98FEB1D0     6295088     6294120         968         968         968

View 1 Replies View Related

Cisco VPN :: AnyConnect Disconnects With SVC Message Error Asa 8.4

Jun 6, 2012

We recently upgraded our any connect client from -2.5.3055 to -3.0.07059. This is running on a ASA HA pair running 8.4(2)8. Since the upgrade our users are seeing continual disconnects.

View 2 Replies View Related

Cisco WAN :: C6509 - Error Message In Syslog

Sep 15, 2009

We have 2 Cat 6509 connected to 1 Gbps Ethernet WAN Link. On each 6509 we use 2 Gbps IPSec SPA Encryption cards for Encryption. The encrypted traffic goes to a GRE Tunnel. This morning I found some error messages in syslog.

%CONST_DIAG-SP-3-HM_TEST_FAIL: Module 1 TestIPSecEncrypDecrypPkt consecutive failure count:2
 
There were also several short tunnel downs/ups. I wonder if there is a bug in the new IOS image 12.2(33)SXI2a. We upgraded to this image last weekend.

View 2 Replies View Related

Net Send Command Error The Message Alias Could Not Be Found

May 14, 2012

net send command not working. Even after starting messenger. Error : The Message Alias could not be found on the network

View 3 Replies View Related

Error Message Receive Download Failed (12007)

May 26, 2011

I am unable to connect to the internet on my desktop computer. The error message I receive is" Download failed(12007) The sever name or address could not be resolved" I am running windows 7. Hooked up to att uverse. My laptop is working as you can see by sending this message. I have been trying to fix this problem for the last 2 days to no avail. I uninstalled norton hoping it was a firewall problem. On the local area connection it shows IPV4 connedtivety: No Network access.

View 2 Replies View Related

Error Message In Google Chrome - DNS Lookup Failed

Jun 20, 2011

I have just gone through hours of tech support with my ISP and still cannot seem to get online. Problem is the same as recent posts by jerguy1928, with message "DNS lookup failed...." coming up in Google Chrome. Both IE and FF just say cannot connect.Running Windows 7 on laptop. I have tried alt DNS settings (Google and others), all the CMD suggestions, disabling firewalls etc, etc! Other computer in house connects just fine.Ping works fine. Really, there appears to be no reason to not be able to connect - since I am actually connected!

View 13 Replies View Related

Error Message Popped Up - Unable To Uninstall Device?

Feb 1, 2011

So I was having trouble loading a game on my computer and I was scrolling through forums looking for an answer and one answer that supposively worked for a lot of people was to unisntall and reinstall my network card.IT told me to go to devices -> right click network adapter -> uninstall -> then scan for hardwarer changes to reinstall When I clicked uninstall an error message popped up and said "Unable to uninstall device because device is required on startup" and then it apparently just uninstalled it anyway and it showed back up after I clicked "scan for hardware changes".Now ever since, everytime I try and connect to the internet my computer says "Limited or no connectivity" and I'm unable to access the internet on that computer, the computer I am on now can connect just fine, so it must have something to do with the network card that i supposively unisntalled.

View 17 Replies View Related

Can't Connect To Internet- Clear NetBT Error Message?

Apr 14, 2012

My wireless network connection appears to be working; I can access the Internet from my laptop, iPad, iPhone, but not from the Dell PC that is the 'host' computer. Local Area Connection 2 Status window shows it as working, when I try to repair it, I get hung up with an error msg:

>>"Windows could not finish repairing the problem because the following action cannot be completed:
Clearing NetBT
For assistance, contact the person who manages your network." <<

System info: Dell PC (don't know model) running Windows XP Home Edition v. 2002 Service Pack 3;
Intel Core 2 Duo CPU E 7500 @ 2.93GHz, 1.96 GB of RAM

View 14 Replies View Related

Cannot See Computers In Work Group - Error Message About Permissions

Jan 19, 2011

I have two desktops connected to the internet through wired connections to a router. I also have one laptop that is wireless connected to the internet via the same router. (Also have another laptop running Vista, but not using it right now.) and all are part of the same work group with unique computer names.Desktop 1 can see that there is a work group, but cannot see the computers in the work group. Error message about permissions.

View 1 Replies View Related

Servers :: Error Message - The Site Is Blocked By Netgear

Feb 24, 2011

When I want to open youtube or facebook,the mesage appear as "The site is blocked by netgear"

View 1 Replies View Related

Error Message Install Wireless Internet Hardware?

Jun 13, 2012

My desktop is telling me I need to install wireless internet hardware. Is that something I buy and install? I am trying to connect to the internet through time warner cable wireless.

View 1 Replies View Related

Linksys Wireless Adapters :: WRT 110/ WPC 100 - No Connection Error Message

Dec 31, 2008

I purchased a WRT110 wireless router several weeks ago.  Used it with my WPC55AG with no problems at all.  I liked the wireless-N, so I decided to upgrade to a wireless-N notebook card and purchased a WPC100.  I can always connect to the router with 100% signal strength.  However, when trying to access the Internet, sometimes I can connect to websites, but I regularly get an error message that Internet Explorer cannot connect to the internet, even though the signal strength is still 100%.
 
Tried going back to my WPC55AG and do not get any connection error messages.  Tried connecting to my router with my PSP and do not get any connection error messages.  Connected to another wireless router that didn't have WPA or WEP using my WPC100 and didn't get any connection error messages..

View 5 Replies View Related

Cisco AAA/Identity/Nac :: Radius Accounting Error Message In ACS 5.3

Jul 2, 2012

I have an error when i try to generate radius accounting.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved