Linksys Wireless Adapters :: WRT 110/ WPC 100 - No Connection Error Message
Dec 31, 2008
I purchased a WRT110 wireless router several weeks ago. Used it with my WPC55AG with no problems at all. I liked the wireless-N, so I decided to upgrade to a wireless-N notebook card and purchased a WPC100. I can always connect to the router with 100% signal strength. However, when trying to access the Internet, sometimes I can connect to websites, but I regularly get an error message that Internet Explorer cannot connect to the internet, even though the signal strength is still 100%.
Tried going back to my WPC55AG and do not get any connection error messages. Tried connecting to my router with my PSP and do not get any connection error messages. Connected to another wireless router that didn't have WPA or WEP using my WPC100 and didn't get any connection error messages..
View 5 Replies
ADVERTISEMENT
Apr 29, 2013
I am trying to set up a E2500 router to a Arris/Comcast modem. I connected the blue cable to the router then to the modem and followed the Cisco instructions on the disk. I was 90% done when I received a error message 82BD0118 - Description - adapter connection time out period expired with no IP address.
View 2 Replies
View Related
Apr 14, 2012
I recently bought the E2500 Router and I am using the EA2500 Adapter with it . I have this set-up on 2 Desktop PC's . 1 Pc is working just fine with this set-up . The other keeps giving me an Error message of "Invalid Key Manual" . What does this mean ? The adapter is working because it does find the Router as a usable connection . It just isn't able to connect to it and keeps giving me the same Error message .
View 8 Replies
View Related
Feb 13, 2012
My WRT54G router is already feeding 2 wireless PC's with no problem. Haven't been as successful getting my new Samsung Series 7 TV wireless connection working. The TV screen prompts for a 'security key', but once entered, tells me the connection is unsuccessful. The TV does not provide any specific error message - just tells me to re-enter the security key and/or re-start the router (which I have done many times with no success). I am entering the 'Encryption key' from the WRT54G router when prompted by the Samsung TV for the 'security key'.
View 2 Replies
View Related
Oct 30, 2012
Is there I can customize the error page which is shown when someone visits a blocked site
View 3 Replies
View Related
Sep 17, 2011
i got an error while connecting to my PIX (515e) via ssh connection there is an error message appears (The server has disconnected with error, server message reads: Internal Error) and at the console session at the time time, the following message appears also (process_create: out of memory)
View 1 Replies
View Related
Oct 28, 2012
When i try to connect kf to wifi router, I keep getting password error message when I type my network pw. I have no problem connecting to other wifi connections
View 6 Replies
View Related
Aug 7, 2011
I have during the day attemped to install the card on my machine.
At first attempt, I followed the instruction on the CD. It took forever, and ended up giving me the notorious "Error 211".
I then tried the different solutions. First this one: [URL] The difference however being that the card indeed was found and identified properly by the device manager. Installed the downloaded drivers manually, but if I remember correctly (this was a few hours ago) it timed out and I got a message the device wasn't properly installed.
[URL] Here I couldn't even perform the first step, since I couldn't even remove the drivers! The process of uninstalling drivers gets stuck, and I waited for over an hour, and eventually decided to just rip the USB dongle out. That stopped the uninstalling process. Refitted the USB dongle in the computer, and the network device showed up the same way as it did before.
So, what apperas to be the case is that the device seems to have the proper drivers installed, but for some reason it cannot communicate properly with the computer. I can see it in the device manager; I can see the properties and even change the settings. However, I cannot uninstall it, remove it (with the Remove USB Device dialogue) or access it in any other way - it becomes completely unresponsive and if anything happens, it times out. The card does not show up in the list of avaliable network devices. The blue diode on the dongle lights, and sometimes flashes as if it was working.
System spec:
Case: ANTEC HTPC FUSION M-ATX
Mobo: ASUS MAXIMUS III GENE P55 S-1156 M-ATXRAM: CORSAIR 8GB DDR3 XMS3 INTEL I5/I7 PC10666 1333MHZProcessor: INTEL CORE I5 750 2.66GHZ 8MB S-1156OS: MICROSOFT WINDOWS 7 HOME PREM 64-BIT ENG
HDD: 2x WESTERN DIGITAL CAVIAR BLACK 500GB 7200RPM SATA/300
Graphics: XFX GEFORCE GTX 275 LITE 896MB GDDR3 PCI-E
View 1 Replies
View Related
Aug 23, 2012
my Linksys Ethernet bridge WET11 V1.0, where working perfect, but when i reset the device, and try lo login whit user admin and password admin, my browser show error 404, this happ whit crome, mozilla, an I Explorer, i download the Setup wizard, and the error message is "the setup wizard was unable to locate a wirless ethernet bridge on the network......"
when i connect the cable to de device, the lan led is on, and the ping command give me reply.
another port to configure, such as telnet?
View 1 Replies
View Related
Mar 17, 2011
I am using the USB network adaptor, Model : WUSB600N version 2. It has worked fine whenever I have needed it. Except now. I received “Your adapter may not be installed properly”” ERROR 211: The network adapter is not installed properly” message last night. Also the Windows pop-up message: “USB device not recognized” message. I removed the adaptor and reinstalled it into another USB port. The same thing happened. I moved it again to a third USB port, I received the same error on all five of my PC’s USB ports. I was not able to access the network at all last night.
I brought in laptop into work today , because the antenna/extension is kept there. I inserted the adaptor and it started right up. After an hour of usage, I disconnected the antenna and the adaptor and reinserting the adaptor without the antenna directly into the USB port. And it still worked fine.I turned the PC off, disconnected everything and went to lunch. When I returned, booted up the PC, and inserted the adaptor and, once again got the error message: “ERROR 211 – The network adapter is not installed properly…. I tried again, this time using the antenna, and it is up and working for now.
View 1 Replies
View Related
Dec 28, 2007
Ive tried to reinstall XP, to redownload driver, to reinstall driver etc...
View 9 Replies
View Related
Jan 9, 2012
I am having trouble installing the wusb100 adapter on a Windows 7 Pro 64 bit machine. I have downloaded the updated files and when I go to install the software, I get to the section that says, "plug in the adapter." At that point, it says it can see the adapter and it sits for 3 minutes trying to complete the install. The I get error 211 which says the adapter is plugged in wrong and to try again. I notice that the adapter is set up with drivers in the Hardward Management area of Windows, however, I cannot access the adapter to set it up. Thoughts? I have also tried to manually install the drivers but they are installed. The trouble is I can't see the adapter.
View 2 Replies
View Related
Oct 27, 2008
Trying to install WMP54G v4.0 on XP SP3. I have tried all three PCI slots. Removing driver RT2500.SYS system will boot. Put it back and BSOD Error:driver_irql_not_less_or_equal
View 8 Replies
View Related
Oct 17, 2011
i have acer travelmate2350. i want to use internet in my laptop by wireless but i am getting a message "no supported wireless adapters available in the system" on the icon of wireless (red cross is also showing).
View 1 Replies
View Related
Jan 2, 2012
OS: Windows 7 Home Premium -- Service Pack 1, 64-bit
Browser: IE 9
Computer: Dell Studio 1745
I am receiving an error message window titled "Wireless Configuration" with the following message:
"OLE initialization failed. Make sure that the OLE libraries are the correct version."
I cannot find anything about updating OLE libraries in Windows 7. I have not installed any new software, and my computer is barely 2 years old. I do not find it a coinicidence that my free Dell tech support expired last month, and now I'm having issues with the Dell wireless card.
View 6 Replies
View Related
Sep 25, 2011
i keep getting an error message when i scan. error message: cannot communicate with scanner for these reasons
-scanner is turned off
-scanner is disconnected (it is disconnected from LAN, if using on LAN)BUT MY MACHINE IS ON
View 3 Replies
View Related
Feb 25, 2013
Sylvania Smartbook synet7wic-bk cannot get online. It shows my wifi is on, but I do not have a tab for wifi information, to put my info in it.
View 2 Replies
View Related
Jun 13, 2012
My desktop is telling me I need to install wireless internet hardware. Is that something I buy and install? I am trying to connect to the internet through time warner cable wireless.
View 1 Replies
View Related
Jan 16, 2012
My wireless internet has been working perfectly well on my XPS 17 (L701X) until last weeky. I was on the internet and then my wireless turned off suddenly. the error message says "turn wireless capability on". BUt on the wardware, the witch is on, but when I check windown mobility center, it shows "wireless off" . Ran network diagnostics, but same error massage "turn wireless capability on". For now, when it happens, I need to restart my computer and it back to nomal. This happens at least 3-4 times a day.
View 1 Replies
View Related
Jan 19, 2011
computer was working fine a few days ago, all of the sudden not able to get online anymore at all,recieve error message 651 with dsl connection, and when trying to connect to wireless get an error message saying invalid ip adress configuration,
ipconfig/all reveals:
C:Usersygydfre>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : bygydfre-PC[code]......
View 14 Replies
View Related
Jul 29, 2012
It did work ok but not now.Even after I put the setup disc into it, it does not show that it has recognised the router. I can only get it to work by using an ethernet cable. I tried to install my router onto it and it came up with a message saying it had "two network adapters, please click on one of them" or words to that effect. It didn't show anything to click onAlso she has recently bought a new desktop computer (Windows 7) and when I was looking into the routers settings it is still showing her name of the old PC she has scapped in the Network. Therefore on the BASIC NETWORK INFORMATION screen it says Network 2. I know this is probably not important but if she ever buys a new PC in the future it will show Network 3So what can I do to get rid of the old computer name on the router settings?
View 1 Replies
View Related
Oct 12, 2011
I have an HP C5280 printer running wirelessly via a TP Link wireless print server and D Link Di 624 wireless router. I can print successfully from either my desktop (which is connected direct to the D Link router) or either of my laptops (wireless). However, when I select the double-sided print option I get a print error message after re-inserting the odd number pages to print the other side of the paper and then click 'continue'.Could I resolve this by connecting the printer both direct to the desktop using USB AND leaving it connected via the wireless TP Link print server? This would enable me to print double-sided from my desktop (as I did before when the printer was only connected via the USB desktop port).
View 1 Replies
View Related
May 7, 2011
My roommate has just gotten a second hand laptop and he's trying to connect it to the Wireless network so that he can browse the internet from his room.However, although all the settings are correct, attempting to connect to the network loops.It comes up showing the Wireless Networks available, I select the network and click connect, it then asks for the encryption key. I enter the key and hit connect again, it comes up with the 'Connecting' pop-up and then loops back to the Available Networks screen again.There are no error messages, it just goes back to the starting screen and it hasnt connected.The Laptop in question is a Lenovo T60 with a Intel PRO/Wireless 3945ABG card.The router is a TP-Link TD-W8960N.
View 5 Replies
View Related
Oct 24, 2012
Upon checking the logs, I'm seeing a lot of these messages:
*emWeb: Oct 25 14:11:01.345: #LOG-3-Q_IND: spam_lrad.c:10136 Validation of STAT_PAYLOAD failed - AP 00:3a:98:09:4e:d0
Always the same MAC address, which I assume is a Cisco AP trying to join. The output interpreter/message decoder isn't much useful. 5508 Controller running ver 7.3.101.0.
View 11 Replies
View Related
Sep 5, 2012
I have a Linksys WUSB100 ver.2 which i'm using on my desktop (uptodate Windows 7) for over a year now. I never had any problems with it until about a week ago.
After starting the computer, it had no network-connection, nor could it find any network anymore . The led-light keeps flashing blue and the device gets pretty hot.
I've tried about everything, i think:
- I've tried to update the drivers, but the installed driver were already uptodate.
- I have re-installed the device with no effect.
- i've installed the device on 2 other computers; my Windows 7- laptop and my old Windows XP SP3-computer. The problems were the same there.
View 2 Replies
View Related
Apr 5, 2013
Region : UnitedKingdom
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP : Virgin Media Limited
when I forward ports I get the following error message:
Things to note:I have the web GUI running on 8080, because I run a file-server on port 80.
I am using a Virgin media branded router in 'modem mode', this would not cause issues.
I did not do anything to change anything, I went to add an additional port to forward and it didn't work.
I am on a Dynamic IP
After it stopped forwarding, I upgraded firmware to: 3.13.26 Build 130129 Rel.59449n.
View 11 Replies
View Related
Jan 28, 2012
I have a Cisco Linksys WRT120N wireless router in one bedroom. On another bedroom which is hardly 15 feet away, I have set up my laptop to connect to it via a Cisco Linksys AE1000 wireless USB adapter. There are two thick walls between one bedroom and another.
Neverthess I find AE1000 dropping connection all the time. There are times I unplug the laptop and take into the same room as my router but it still doesn't connect. The wireless strength constantly varies from Very Good to Excellent but no matter what I try AE1000 never connects to it. If I restart my laptop, sometimes it does connect.
All in all its very frustrating that two Cisco products can't communicate effectively with each other.
P.S: I have both my ASUS tablet and my verizon droid both connecting to the wireless router from the same room as my laptop without any issues.
View 9 Replies
View Related
Dec 20, 2009
I bought the WMP600N because Linksys and Microsoft listed it as 'compatible' for Windows 7 x64. My experience:
- unstable and weak connection
- pings to websites like google.com drops, average: 1 out of 3
- low signal, on the same spot my three years old HP-laptop with 'a build in wireless card' has full signal strength in Windows 7
- it works well under Windows XP (32 bit)
I am convinced that drivers for the WMP600N are not ready for Window 7 x64. Linksys (or Ralink, which developed the chipset), release a proper driver for the WMP600N.
View 9 Replies
View Related
Feb 23, 2011
I'm using the WUSB54GSC on a IBM Desktop computer, not old, but not new by any means. We have wireless internet through Comcast, and my room is on the second floor. The router is on the first floor, but it's almost just underneath my room. The internet seems to connect completely fine, but it will disconnect at some things. For example, when I tried to go to mapquest, it was like it was flooding, and it dropped the internet connection. I also play games online, and when I play the actual game itself (GTAA/Online) it plays just fine, no lag, nothing like that, but when I try to connect to Teamspeak, when it's loading the channels after it connects, it just drops the connection..
View 1 Replies
View Related
Jan 24, 2013
I had this card working on this notebook with Windows XP, but with only 256mb ram it ran too slow. So I went back to 2000 on it. But I can't get the card to work, I've tried using the setup, the link light on the card does flash on and off. But in the linksys program just says no association with access point and says WPC54GS is inactive. I tried just installing the driver when it detects it but that didn't work. Also I try to start the wireless configuration and just get error 1747 the authentication service is unknown. What do I need to do to get the card working on here so I have internet access?
View 5 Replies
View Related
Nov 6, 2011
Every now and then my adapter won't be able to connect to the internet for a few minutes, and then it just comes back. This happens frequently, varying from every few minutes to every few hours. If I re-connect the adapter, though, a connection instantly comes back. There's no sign that it's lost connection, the taskbar still displays Internet access and a 5 bars, and the blue light on the adapting keeps flashing; but I just can't connect to the iternet at all.
View 1 Replies
View Related
Dec 9, 2011
I have the AE1000 adaptor on my wife's computer and direct wired on mine is the E2000.The e2000 is set to 2.4mhz and when connected to the wireless network, my wifes ae1000 shows it is connected at 144mbps.When I change the e2000 to 5.0 mhz and then my wife connects to the internet, she shows the ae1000 at 16-53 mbps. When I switch back to 2.4 she shows 144. I thought that when the e2000 is connected at 5.0 she should have a "faster connection".
View 1 Replies
View Related
Oct 1, 2010
I have the problem that my WUSB600N loses the connection to the internet after a few minutes. I boot the system and the wireless stick run impeccable. After a few minutes the windows 7 network icon show me a yellow exclamation mark and no more internet access is possible. When I unplug the WUSB600N from the system und plug it on again the internet connection is possible again and run then over houres without a problem.
View 8 Replies
View Related
