Message Saying It Had Two Network Adapters?
Jul 29, 2012
It did work ok but not now.Even after I put the setup disc into it, it does not show that it has recognised the router. I can only get it to work by using an ethernet cable. I tried to install my router onto it and it came up with a message saying it had "two network adapters, please click on one of them" or words to that effect. It didn't show anything to click onAlso she has recently bought a new desktop computer (Windows 7) and when I was looking into the routers settings it is still showing her name of the old PC she has scapped in the Network. Therefore on the BASIC NETWORK INFORMATION screen it says Network 2. I know this is probably not important but if she ever buys a new PC in the future it will show Network 3So what can I do to get rid of the old computer name on the router settings?
View 1 Replies
ADVERTISEMENT
Dec 31, 2008
I purchased a WRT110 wireless router several weeks ago. Used it with my WPC55AG with no problems at all. I liked the wireless-N, so I decided to upgrade to a wireless-N notebook card and purchased a WPC100. I can always connect to the router with 100% signal strength. However, when trying to access the Internet, sometimes I can connect to websites, but I regularly get an error message that Internet Explorer cannot connect to the internet, even though the signal strength is still 100%.
Tried going back to my WPC55AG and do not get any connection error messages. Tried connecting to my router with my PSP and do not get any connection error messages. Connected to another wireless router that didn't have WPA or WEP using my WPC100 and didn't get any connection error messages..
View 5 Replies
View Related
Oct 17, 2011
i have acer travelmate2350. i want to use internet in my laptop by wireless but i am getting a message "no supported wireless adapters available in the system" on the icon of wireless (red cross is also showing).
View 1 Replies
View Related
Oct 8, 2011
I am looking for a way to send messages over my open network just like you wanted to. Can't seem to find an answer so far on line.
View 1 Replies
View Related
Jul 8, 2012
I was trying to connect my computers on a home network so that I can access either one via the other.When I try however I get the message:
"***-PC is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
long failure: user account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a police restriction has been enforced.
That is the message from computer 1 to computer 2.
Computer 2 gives me the message:
Windows cannot access \***-PC
Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose.
View 2 Replies
View Related
Feb 20, 2011
i am attaching the image which i recieved last night when i was assigning the IP but i got the error message which does not resembel to IP conflict error messsage
View 1 Replies
View Related
Jan 23, 2012
I have a Asus EeePC SeaShell 1005HA-H and i have a LINKSY ROUTER in my home. I recently been having problems with my wireless internet. I know it isnt the router because i have went to my boyfriends house and my laptop usually automatically connects to his internet and the same message continues to show up "Acquiring Network Address message". I try to repair the network and a error comes up. Then i went to check the firewall settings and the firewall is tured off.
View 1 Replies
View Related
Nov 26, 2012
I just recently bought a new HP Envy m6 laptop that's not even close to a week old yet and I've run into problems with the wired connection. I have two different belkin ethernet cable cords to use and neither of them seem to be connecting whenever I plug them into the ethernet socket on my laptop. I've tried uninstalling the network adapters and updating the drivers. None of that seemed to have solved my problem so far.
Is there anything that I can do to solve this problem? I would be fine with the wireless connection that I'm currently using if it didn't fluctuate so horribly. I live in an apartment complex that provides internet access to me so I don't know what company they are using nor the router that is providing me with the wireless connection. I will be checking in with the management to see if it's not a problem with their internet tomorrow.
As for the network adapter itself, I have a Qualcomm Atheros AR9485 802.11b/g/n WiFi Adapter and a Realtek PCIe GBE Family Controller. I'm assuming the Realtek adapter is the one that deals with wired connections. I'm currently running Windows 8 on the laptop.
View 3 Replies
View Related
Nov 25, 2011
I'm running a home network with 3 computers via a linksys router attached to a westell modem. Is there a local network messaging system I can use to pop a message on a screen to one of the other computers? Can I use DOS?
View 1 Replies
View Related
Aug 10, 2011
how do i broadcast a message on my network using command prompt?
View 2 Replies
View Related
Jul 19, 2012
I received the recovery CD's from Dell and reinstalled the operating system, But now I can't connect to the Internet and get the message that there is no network adapter. What do I do now? Do I need to use the Driver CD and reinstall also? [code]
View 2 Replies
View Related
May 22, 2011
Same problem ' network cable unplugged' even if it is physically connected. I have sony vaio pczim series with win 2000 xp home edition with a broadband (cpe adsl2+ type) connection. While everything working fine for past two years, suddenly after a thunderstorm night, I noticed the network connection failure with the message. I checked the router, cable and the same are working fine with other hp laptop. Even the vaio is running with the same router while usb port is used and even the wireless and bluetooth are fine, but network with ethernet cable connection does not.
View 1 Replies
View Related
Aug 1, 2012
canon pixma MX 715 network set up failed X P home edition
View 1 Replies
View Related
Apr 24, 2012
So I have an issue with getting a laptop hooked onto the router signal. The router is a brand spankin new Linksys EA4500 and the laptop is an IBM which is running Win XP (not sure of SP version as it is a customer's comp. at a hotel I run). Anyway, the error message I am encountering is:The network password needs to be 40 bits r 104 bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal charactersAt first I thought is was my router password since it contained a $ symbol so I changed it to only letters and numbers but still didn't work. I have never encountered this error message on any laptops and no other rooms have been affected.
View 2 Replies
View Related
May 24, 2012
I am able to connect to internet using micromax modem having aircel sim.But "no network access" message is shown and so i am not able to accesss any website.
View 1 Replies
View Related
Nov 5, 2011
My friend has just got a laptop and when she is at my place it shows that my computer is nearby but message says "Windows was unable to find a certificate to log in to network".
View 6 Replies
View Related
May 20, 2012
... and made a fundamental mistake of uninstalling adapters hastily without looking into it. Now when I try to re-install the adapters, I'm running into difficulties. Specifically, I don't have the CD-ROM I originally must have used, and the following message is popping up: "Files Needed - The file 'atl02_2k.sys' on Atlansic Fast Ethernet Adapter Installation Disk is needed. Type the path where the file is located and then click OK." Unfortunately, I don't have any idea if there is a path where this is located, so installation cannot complete.
The reason I took this option to begin with was that the wireless connection on my laptop [Asus, Windows XP] was acquiring network address without ever connecting fully to the internet. I had previously tried another of other methods, such as manually entering an IP address, to no avail.
View 7 Replies
View Related
Aug 13, 2012
i am having a problem with my desktop right now, just recently i re-installed Windows7, a clean format... but then i suddenly noticed that i cant connect to the internet, no network adapters are detected on the Network Connections, its empty i looked at the Device Manager and saw a yellow warning on realtek rtl8139/810x family fast ethernet nic, i download the driver using my laptop (wireless connection)... and installed that driver on my desktop pc then checked the device manager once again, but it still has a yellow warning.i dont know what to do anymore, and at the last screenshot theres this error message: This device cannot find enough free resources that it can use. (Code 12) If you want to use this device, you will need to disable one of the other devices on this system.i have two lan cards, one at the motherboard(not in use) and the other PCI-E lan card (tp-link ) ...im just wondering if that Realtek i just installed is the lan driver for the motherboard?
View 2 Replies
View Related
Apr 2, 2013
I am looking for some information concerning network adapters. Many server vendors (HP, Dell, IBM and so on) use multiport single network adapter (one card,several ports -let's assume 4 ports). What resources are shared in multiport solution? For example:
- does multiport nic has significant limitations? For example, it's cpu cannot handle full 4-port load?
- interrupt sharing?
- buffer size?
View 3 Replies
View Related
May 7, 2011
My roommate has just gotten a second hand laptop and he's trying to connect it to the Wireless network so that he can browse the internet from his room.However, although all the settings are correct, attempting to connect to the network loops.It comes up showing the Wireless Networks available, I select the network and click connect, it then asks for the encryption key. I enter the key and hit connect again, it comes up with the 'Connecting' pop-up and then loops back to the Available Networks screen again.There are no error messages, it just goes back to the starting screen and it hasnt connected.The Laptop in question is a Lenovo T60 with a Intel PRO/Wireless 3945ABG card.The router is a TP-Link TD-W8960N.
View 5 Replies
View Related
Sep 29, 2012
Laptop connects to wifi network. But it shows "No Internet Access" message.My Macbook connects to the internet just fine and the wifi on my iphone works as well.The ethernet on the laptop works and I am able to access the internet this way. The laptop does connect to some of the other access points but I've had issues with my router.I tried the usual debugging mechanisms - disable/enable adapter, reset the router, reset the tcp/ip stack. [code]
View 1 Replies
View Related
Jan 5, 2013
I have a Netgear WNR612 wireless router, which worked fine for a few weeks. Then something happened and I can't keep the connection anymore. It happened right after I used iTunes to update my iPhone, perhaps a coincidence, but I'm mentioning that just in case. Internet still works fine with ethernet cable straight from the computer, only the wireless connection doesn't work. This happened about a month ago and I haven't been at home much to fix the problem. I have turned off and unplugged everything for several days at a time while gone. I get a Network Error message saying, Windows has detected an IP address conflict. I have tried restoring the router back to factory settings and reinstalling the wireless card. I have tried changing the IP address settings both in the Network and Sharing Center and the router admin page. What I think I should do is change the IP address in Command Prompt, but when I type "ipconfig /release", it says "No operation can be performed on Wireless Network Connection 2 while it has its media disconnected" and the same for Local Area Connection. I don't understand what this means, because there is a wireless key in my keyboard and there is a white light (not orange) like there should be. Also in the Network and Sharing Center, I can see that the connections are enabled.
View 14 Replies
View Related
Oct 19, 2011
I want to use 2 network adapters in the same computor. 1 will route thru our domain/network/firewall/internet. The other will bypass everything and go straight out the same internet but through a different router. I need to get to a website that for some reason our firewall blocks a few functions on that site. When I bypass the firewall everything is good.
View 1 Replies
View Related
Jun 23, 2012
I am using Thomson moden. Recently when ever I start Skype the moden stop working and is held up, requiring to reset. On trouble shooting : 'Cannot find network adaptors' appears. After resetting work well with all other programmes. Took my coputer to another place and another moden- skype works well.
View 3 Replies
View Related
Jun 27, 2011
I just upgraded his personal computer. It has an internal wireless card and we have a USB wireless adapter installed.What is the proper way to configure one adapter to connect to the network (via the existing linksys router) and the other adapter to connect to the ATT Hotspot? The goal being able to access the internet from the PC while still being connected to the network. Not interested in sharing the internet connection across the network or anything.It works sometimes, but establishing and maintaining a working connection to both simultaneously is not consistent. From the internet research I've done, it seems like there can be issue with the IP addresses, but I can't find a tutorial for my exact situation.
View 1 Replies
View Related
Aug 26, 2012
I currently have a set ( 2 ) of these plug in the wall network adapters so I can use my gaming pc in the other side of my house. I am looking to hook up my gaming pc to my printer which is upstairs by using this same method but obviously only need one ( to plug the printer into ) so I was wondering if I bought one of these network adapters, which I can get for5 all in including delivery, would I be able to sync it to work with my existing adapters
View 4 Replies
View Related
Jul 28, 2011
I am having problems with any type of Network Card or Network USB adapter working with my PC running Windows 7. I had a LinkSys WMP54G PCI card working on this computer about a year ago as I was needing to use a wireless connection but then I didn't use it for 6 months. When I went to use it again, it wouldn't pick up connections at all.Thinking it was an issue with the card, I picked up a Edimax 7612UAn USB adapter thinking it should work out of the box. When I plug the USB adapter in, the standard Windows driver installation tries to run but an error message occurs stating "Device driver software was not successfully installed" accompanied by "Realtek RTL8191SU Wireless LAN 802.11n USB Failed". If I try to install the drivers manually, nothing changes and in Device Manager the following error message is displayed under Device Status "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)".
View 3 Replies
View Related
Jul 27, 2011
I am having problems with any type of Network Card or Network USB adapter working with my PC running Windows 7. I had a LinkSys WMP54G PCI card working on this computer about a year ago as I was needing to use a wireless connection but then I didn't use it for 6 months. When I went to use it again, it wouldn't pick up connections at all. Thinking it was an issue with the card, I picked up a Edimax 7612UAn USB adapter thinking it should work out of the box. When I plug the USB adapter in, the standard Windows driver installation tries to run but an error message occurs stating "Device driver software was not successfully installed" accompanied by "Realtek RTL8191SU Wireless LAN 802.11n USB Failed". If I try to install the drivers manually, nothing changes and in Device Manager the following error message is displayed under Device Status "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)".
View 1 Replies
View Related
Jul 31, 2011
I just installed a fresh copy of XP on an old Dell E310 my wife and kids use. Just an FYI, I used D-link prior to the re-install with no issues for a few years. Anyway, after XP was up, I put the D-link drivers on. The internet came up and worked like normal for 5-10 minutes, then 'poof', gone. Each time I attempted to connect after that I got a warning message stating I do not have network adapters? I was under the impression that is what D-link was?
View 1 Replies
View Related
May 28, 2012
My Dell Laptop is connected to Wildbue via LAN connection to Broadband. January or February I connected Belkin Router to obtain Wi-Fi access for other laptops, Cell and PS3, Everything seemed to be working fine. I tried to disconnect the Dell in order to use it via Wi-Fi. This caused problems when my sons laptop lost connection. My guess was that it was actually routed through the Dell via network. Anyway, as I was working to network all correctly. My sons friend decided that he couldn't wait for internet and forced another laptop to login to internet. In the process, it appeared that he changed by router password so that I could not access it. Being a beginner when it comes to network connections, etc., I spent alot of time trying to correct the Belkin Router. I finally disconnected the router and attempted to remove all detail on my Dell. I am sure that my adapter information is not completely accurate. Or so it appears. Note that I do have LAN internet connection and I can search for wireless access. If necessary, I will reinstall the Belkin Router since it is my understanding that it is needed for Wi-Fi access to my internet provider connected via Broadband modem.
I am sure that there will be corrections. I am sure that there is more that will need to be done in order to provide access to other laptops and cells. At this time, I am getting internet on my main laptop that is connected via LAN connection. However, I am having problems understanding adapters for wireless connects.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsPenis>IPCONFIG/ALL
Windows IP Configuration
[code]...
View 1 Replies
View Related
Sep 25, 2011
i jus restarted my computer and i cant connect to the internet... it says im connected on the bottom corner and even my network connections says connected to wifi. I am using a netgear flash drive plug in. but wen i go to my task manager under the networking tab it says that there are no active network adapters found... what do i do?
View 1 Replies
View Related
Jan 9, 2012
Can I have some programs use my wireless connection, and some use my wired? they are connected to two different networks, (wired - school, wireless - phone tether).Also, is it possible to have two virtual machines be connected to two different network adapters, ie. wired and wireless?
View 4 Replies
View Related
Feb 25, 2013
I have a weird issue with my daughter's laptop. It will connect to the wired network, and give internet access, but it won't allow any connections via a wireless network adaptor.The laptop is on Windows 7 Home Premium 64 bit.In device manager it says the wireless adaptor is working properly. The drivers are the latest. Down in the notification area it says "not connected - no connections are available". She has a wifi switch (Fn+F3) on the laptop, but switching it makes no difference. I have an old desktop pc that connects via a USB wifi dongle, so I plugged the dongle into the laptop. It installed without problems, but in the notification area it says the same thing, "not connected - no connections available" So now I'm thinking, "what sits between the network adaptors and Windows? How come it will connect on wired, but not wireless?"
This all started when I updated her Atheros wifi driver. From that moment on it wouldn't connect using wifi. I thought I had somehow physically broken the wifi adaptor hardware, so I bought a new one (a Killer n1202), but installing it made no difference. It's as though I have somehow altered the way that Windows communicates with any wireless adaptor.When I go to the command line and type "ipconfig /all", there is no entry for "wireless LAN adaptor wireless network connection", as there is on my other laptop.
View 17 Replies
View Related
