I am using Thomson moden. Recently when ever I start Skype the moden stop working and is held up, requiring to reset. On trouble shooting : 'Cannot find network adaptors' appears. After resetting work well with all other programmes. Took my coputer to another place and another moden- skype works well.
View 3 Repliesi am having a problem with my desktop right now, just recently i re-installed Windows7, a clean format... but then i suddenly noticed that i cant connect to the internet, no network adapters are detected on the Network Connections, its empty i looked at the Device Manager and saw a yellow warning on realtek rtl8139/810x family fast ethernet nic, i download the driver using my laptop (wireless connection)... and installed that driver on my desktop pc then checked the device manager once again, but it still has a yellow warning.i dont know what to do anymore, and at the last screenshot theres this error message: This device cannot find enough free resources that it can use. (Code 12) If you want to use this device, you will need to disable one of the other devices on this system.i have two lan cards, one at the motherboard(not in use) and the other PCI-E lan card (tp-link ) ...im just wondering if that Realtek i just installed is the lan driver for the motherboard?
View 2 Replies View RelatedMy adapter AE 3000 can't find my wireless network. Other adapters can.
View 1 Replies View RelatedI've just bought a WUSB300N Wireless USB Network Adapter and installed it with the Vista drivers on my Windows 2008 server. Drivers are succesfully installed and the Device status says "Device is working properly" but when I want to connect to a network it doesnot show any networks. I'm sure there are network available because I'm connected now on my other laptop ;-) typing this message.
View 5 Replies View RelatedHow to find the mac address of the AE2500?
View 2 Replies View RelatedSo I lost the CD to my Cisco Linksys AE1200 wireless USB adapter and I can't seem to find the drivers for it ANYWHERE.
View 1 Replies View RelatedI cannot find a driver for this model. The linksys donwload site has version 1, 2, and 4... not ver.3
View 5 Replies View RelatedI am trying to install the Ae1200 on my notebook (windowsXP), which doesn't have a cd drive. I downloaded the driver from cisco page, and also copied setup disc from a 2nd comp onto a usb drive. Using both options, the wizards starts correctly, but then ends with error message saying "cannot find specified file"
View 2 Replies View RelatedI've been having major issues with my wireless on this computer (randomly decides not to work while computers in the same room are fine) so I got a new wireless card to see what it could do. Installed it, everything says it's installed fine, but it will NOT detect any wireless networks. Not just mine, any of the 8+ networks I can usually detect from my room. I'm on Win7 Professional 64.
Things I've tried (and I'll be seriously annoyed if people reccomend doing them a 14th time, as I've already spent an hour on livechat with a support person telling me to do things I told her I'd already done):
Installed with 4 different drivers (the ones on the CD, the ones on the website, two versions directly from Ralink for the chipset) Tried both the manual and automatic "update driver" options in device manager. Uninstalled/reinstalled it like 4 times. Moved it to a new PCI slot.
Removed the old adapter before installing it. Removed the old adapter after installing it. Tried connecting to my network as a "hidden" network (which it's not). Installed only the driver and not the adapter utility, and used the utility. Installed the software before physically installing the adapter. Installed it after physically installing the adapter.
I'm at a loss. It doesn't detect ANY networks. No, it's not a problem with my network, there's more than a half dozen that my other adapter, in the same computer, can detect. And I don't know why. It has not ever worked properly. The antennae are on properly, nothing is interfering with it (though that would be odd since it's 3 inches from an adapter that can detect other networks). I might be willing to accept that it's just DoA, but that would be odd considering it installs just fine and reports that it's working just fine.
So I recently took the WMP54GS ver 1.1 wireless adapter out of my old XP computer and put it in my new Vista 64bit computer. I successfully installed the adapter, downloaded the drivers (WMP54GS-v1.1_v4.102.15.53_Vista_dr), and unzipped them on my C drive to their Linksys Driver folder. When I go to find available networks it says "Windows cannot find any additional networks," and when I try to set up a wireless network it shows a blank window and says "an unexpected error has occurred." I can see the adapter in the device manager, so it obviously installed correctly.
View 5 Replies View RelatedI purchased two WUSB600N V2 wireless adapters recently and have had nothing but problems on an otherwise stable network where I have iPads, iPhones, Netbooks, media centres, wireless printers, Notebooks and other USB PC-based network devices working without problems.
The WUSB600Ns are connected to desktop PCs, running WIndows XP SP3. I have removed the Linksys Network Management software and use Microsoft's wireless network management software. I am running the latest drivers 1.4.10.0 for the cards. My WAP is a Belkin F5D-8236-4 running in WAP only mode. It is set to 40Mhz Channel 11 primary, Channel 7 secondary. Protected Mode is off, Broadcast SSID is on. I run WPA2-PSK AES for encryption. Note: I've tried all combinations of bandwidth and channel settings. I've run Netstumbler to find clear air channels - 11 seems best.
The issues are:
* seldomly connects at boot automatically without intervention.
* occasionally does not find WAP to connect to.
* sometimes will not connect to WAP - sits at "Acquiring Network Address".
* sometimes will not even get to Acquiring Network Address.
* Will often, once connected, after a while lose connection - the timeframe is inconsistent.
All of my other devices do not have these issues. I've been working on this issue for about a week trying to stabilise, even get a consistent failure pattern, but I'm about to send them both back.These are close to the most frustrating devices I've configured and I've got a lot of stuff on my network.
I just installed a new router E3200.... now to install compatible USB adapter (AE2500)..... problems. The error is that the Cisco Connect software cannot find the USB adapter when I plug the AE2500 into any of the USB ports. The target machine is a lenovo T61 with XP installed.I have successfully installed the AE2500 on an older machine lenovo R52 with XP , no problems, so not the adapter.
I downloaded more recent version of Cisco Connect v 1.0.03, still no luck on T61.I also disabled firewall and virus protection, that did not work. Other possibilities I can try? I got the AE2500 for the T61, would like to get there.
I cant find the WUSB600n ver.2 drivers on your support page: url...When I click "Version 1.0" it shows me the Win7 driver but by clicking "Version 2.0" it just says: "Guides and Information" but theres no drivers. I suppose it's a bug.I have a new Laptop so I need the Win7 64bit driver for ver.2.
View 2 Replies View Related... and made a fundamental mistake of uninstalling adapters hastily without looking into it. Now when I try to re-install the adapters, I'm running into difficulties. Specifically, I don't have the CD-ROM I originally must have used, and the following message is popping up: "Files Needed - The file 'atl02_2k.sys' on Atlansic Fast Ethernet Adapter Installation Disk is needed. Type the path where the file is located and then click OK." Unfortunately, I don't have any idea if there is a path where this is located, so installation cannot complete.
The reason I took this option to begin with was that the wireless connection on my laptop [Asus, Windows XP] was acquiring network address without ever connecting fully to the internet. I had previously tried another of other methods, such as manually entering an IP address, to no avail.
I am looking for some information concerning network adapters. Many server vendors (HP, Dell, IBM and so on) use multiport single network adapter (one card,several ports -let's assume 4 ports). What resources are shared in multiport solution? For example:
- does multiport nic has significant limitations? For example, it's cpu cannot handle full 4-port load?
- interrupt sharing?
- buffer size?
I want to use 2 network adapters in the same computor. 1 will route thru our domain/network/firewall/internet. The other will bypass everything and go straight out the same internet but through a different router. I need to get to a website that for some reason our firewall blocks a few functions on that site. When I bypass the firewall everything is good.
View 1 Replies View RelatedIt did work ok but not now.Even after I put the setup disc into it, it does not show that it has recognised the router. I can only get it to work by using an ethernet cable. I tried to install my router onto it and it came up with a message saying it had "two network adapters, please click on one of them" or words to that effect. It didn't show anything to click onAlso she has recently bought a new desktop computer (Windows 7) and when I was looking into the routers settings it is still showing her name of the old PC she has scapped in the Network. Therefore on the BASIC NETWORK INFORMATION screen it says Network 2. I know this is probably not important but if she ever buys a new PC in the future it will show Network 3So what can I do to get rid of the old computer name on the router settings?
View 1 Replies View RelatedI just upgraded his personal computer. It has an internal wireless card and we have a USB wireless adapter installed.What is the proper way to configure one adapter to connect to the network (via the existing linksys router) and the other adapter to connect to the ATT Hotspot? The goal being able to access the internet from the PC while still being connected to the network. Not interested in sharing the internet connection across the network or anything.It works sometimes, but establishing and maintaining a working connection to both simultaneously is not consistent. From the internet research I've done, it seems like there can be issue with the IP addresses, but I can't find a tutorial for my exact situation.
View 1 Replies View RelatedI currently have a set ( 2 ) of these plug in the wall network adapters so I can use my gaming pc in the other side of my house. I am looking to hook up my gaming pc to my printer which is upstairs by using this same method but obviously only need one ( to plug the printer into ) so I was wondering if I bought one of these network adapters, which I can get for5 all in including delivery, would I be able to sync it to work with my existing adapters
View 4 Replies View RelatedI am having problems with any type of Network Card or Network USB adapter working with my PC running Windows 7. I had a LinkSys WMP54G PCI card working on this computer about a year ago as I was needing to use a wireless connection but then I didn't use it for 6 months. When I went to use it again, it wouldn't pick up connections at all.Thinking it was an issue with the card, I picked up a Edimax 7612UAn USB adapter thinking it should work out of the box. When I plug the USB adapter in, the standard Windows driver installation tries to run but an error message occurs stating "Device driver software was not successfully installed" accompanied by "Realtek RTL8191SU Wireless LAN 802.11n USB Failed". If I try to install the drivers manually, nothing changes and in Device Manager the following error message is displayed under Device Status "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)".
View 3 Replies View RelatedI am having problems with any type of Network Card or Network USB adapter working with my PC running Windows 7. I had a LinkSys WMP54G PCI card working on this computer about a year ago as I was needing to use a wireless connection but then I didn't use it for 6 months. When I went to use it again, it wouldn't pick up connections at all. Thinking it was an issue with the card, I picked up a Edimax 7612UAn USB adapter thinking it should work out of the box. When I plug the USB adapter in, the standard Windows driver installation tries to run but an error message occurs stating "Device driver software was not successfully installed" accompanied by "Realtek RTL8191SU Wireless LAN 802.11n USB Failed". If I try to install the drivers manually, nothing changes and in Device Manager the following error message is displayed under Device Status "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)".
View 1 Replies View RelatedI just installed a fresh copy of XP on an old Dell E310 my wife and kids use. Just an FYI, I used D-link prior to the re-install with no issues for a few years. Anyway, after XP was up, I put the D-link drivers on. The internet came up and worked like normal for 5-10 minutes, then 'poof', gone. Each time I attempted to connect after that I got a warning message stating I do not have network adapters? I was under the impression that is what D-link was?
View 1 Replies View RelatedMy Dell Laptop is connected to Wildbue via LAN connection to Broadband. January or February I connected Belkin Router to obtain Wi-Fi access for other laptops, Cell and PS3, Everything seemed to be working fine. I tried to disconnect the Dell in order to use it via Wi-Fi. This caused problems when my sons laptop lost connection. My guess was that it was actually routed through the Dell via network. Anyway, as I was working to network all correctly. My sons friend decided that he couldn't wait for internet and forced another laptop to login to internet. In the process, it appeared that he changed by router password so that I could not access it. Being a beginner when it comes to network connections, etc., I spent alot of time trying to correct the Belkin Router. I finally disconnected the router and attempted to remove all detail on my Dell. I am sure that my adapter information is not completely accurate. Or so it appears. Note that I do have LAN internet connection and I can search for wireless access. If necessary, I will reinstall the Belkin Router since it is my understanding that it is needed for Wi-Fi access to my internet provider connected via Broadband modem.
I am sure that there will be corrections. I am sure that there is more that will need to be done in order to provide access to other laptops and cells. At this time, I am getting internet on my main laptop that is connected via LAN connection. However, I am having problems understanding adapters for wireless connects.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsPenis>IPCONFIG/ALL
Windows IP Configuration
[code]...
i jus restarted my computer and i cant connect to the internet... it says im connected on the bottom corner and even my network connections says connected to wifi. I am using a netgear flash drive plug in. but wen i go to my task manager under the networking tab it says that there are no active network adapters found... what do i do?
View 1 Replies View RelatedCan I have some programs use my wireless connection, and some use my wired? they are connected to two different networks, (wired - school, wireless - phone tether).Also, is it possible to have two virtual machines be connected to two different network adapters, ie. wired and wireless?
View 4 Replies View RelatedI have a weird issue with my daughter's laptop. It will connect to the wired network, and give internet access, but it won't allow any connections via a wireless network adaptor.The laptop is on Windows 7 Home Premium 64 bit.In device manager it says the wireless adaptor is working properly. The drivers are the latest. Down in the notification area it says "not connected - no connections are available". She has a wifi switch (Fn+F3) on the laptop, but switching it makes no difference. I have an old desktop pc that connects via a USB wifi dongle, so I plugged the dongle into the laptop. It installed without problems, but in the notification area it says the same thing, "not connected - no connections available" So now I'm thinking, "what sits between the network adaptors and Windows? How come it will connect on wired, but not wireless?"
This all started when I updated her Atheros wifi driver. From that moment on it wouldn't connect using wifi. I thought I had somehow physically broken the wifi adaptor hardware, so I bought a new one (a Killer n1202), but installing it made no difference. It's as though I have somehow altered the way that Windows communicates with any wireless adaptor.When I go to the command line and type "ipconfig /all", there is no entry for "wireless LAN adaptor wireless network connection", as there is on my other laptop.
My hp computer is not recognizing any network adapters. Im running windows 7.
View 14 Replies View Relatedvirus disabled my Network adapters and my internet dongle is "unavailable".....i removed all viruses but i m not able to use my LAN, Wifi, Bluetooth, Internet Dongle etc...
View 1 Replies View Relatedmy latency values are extremely high, sometimes millions(!) of microseconds. THe problem is always solved by disconnecting the 11b/g wireless LAN adapter, or the Intel(R) Gigabit Network connection. However, I can't work without internet.
View 19 Replies View RelatedI'm planning to build a network in a office and I've decided to do that with powerline AV network adapters.I
1. what is the real limit of numbers of powerline AV adapters in one network?
2. what if my neighbours are planning to build their own network and total number of adapters in building exceeds the maximum possible number. How to filter powerline networks from each other?
I am trying to assign a static IP address for network adaptor as i am going to be using it to install Active Directory on VMWare Worksation. I was told that if i went into Device Manager within my worksation then Advance > Locall Administered Address and set a static IP, when i install AD and it asks to whether set a static or dynamic IP it would continue the install process. However, after setting a static ip it did not, can somebody tell me how i can set the correct IP address for me to continue instaling AD.
View 12 Replies View RelatedI updated my graphics card driver and when I rebooted, the wireless wasn't working. I went into device manager, and all the network adapters listed there had a yellow exclamation mark beside them. Attempts to disable/enable and uninstall/reinstall haven't worked. I'm at a total loss. I've tried system restore but it failed, and I've tried reinstalling the graphics card driver update, but that hasn't worked either.
View 1 Replies View Relatedi've just upgraded my graphic card and now i don't have any network adapters listed in the device manager (only firewire under +IEEE 1394 and all the other devices) I've already reinstalled Windows 7 (64 Bit) and tried installing another LAN card (10/100) - that wasn't recognized.
Within the BIOS (award- Motherboard- GA-P35-DS4 ) i couldn't find anything related that should be turned off/on? [URL]
Could it be broken if it is not appearing there? If yes- why isn't the motherboard recognizing my other LAN Adapter that i've installed on the bottom slot
Should i reset the Bios by pulling the battery/using the cmos jumper?