Getting Network Connections / Adapters Verification?

May 28, 2012

My Dell Laptop is connected to Wildbue via LAN connection to Broadband. January or February I connected Belkin Router to obtain Wi-Fi access for other laptops, Cell and PS3, Everything seemed to be working fine. I tried to disconnect the Dell in order to use it via Wi-Fi. This caused problems when my sons laptop lost connection. My guess was that it was actually routed through the Dell via network. Anyway, as I was working to network all correctly. My sons friend decided that he couldn't wait for internet and forced another laptop to login to internet. In the process, it appeared that he changed by router password so that I could not access it. Being a beginner when it comes to network connections, etc., I spent alot of time trying to correct the Belkin Router. I finally disconnected the router and attempted to remove all detail on my Dell. I am sure that my adapter information is not completely accurate. Or so it appears. Note that I do have LAN internet connection and I can search for wireless access. If necessary, I will reinstall the Belkin Router since it is my understanding that it is needed for Wi-Fi access to my internet provider connected via Broadband modem.

I am sure that there will be corrections. I am sure that there is more that will need to be done in order to provide access to other laptops and cells. At this time, I am getting internet on my main laptop that is connected via LAN connection. However, I am having problems understanding adapters for wireless connects.

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsPenis>IPCONFIG/ALL
Windows IP Configuration

[code]...

View 1 Replies


ADVERTISEMENT

Cabling / Cards :: Can't Find Network Adapters On Network Connections

Aug 13, 2012

i am having a problem with my desktop right now, just recently i re-installed Windows7, a clean format... but then i suddenly noticed that i cant connect to the internet, no network adapters are detected on the Network Connections, its empty i looked at the Device Manager and saw a yellow warning on realtek rtl8139/810x family fast ethernet nic, i download the driver using my laptop (wireless connection)... and installed that driver on my desktop pc then checked the device manager once again, but it still has a yellow warning.i dont know what to do anymore, and at the last screenshot theres this error message: This device cannot find enough free resources that it can use. (Code 12) If you want to use this device, you will need to disable one of the other devices on this system.i have two lan cards, one at the motherboard(not in use) and the other PCI-E lan card (tp-link ) ...im just wondering if that Realtek i just installed is the lan driver for the motherboard?

View 2 Replies View Related

Linksys Wireless Adapters :: AE1000 Requires Connections To Be Managed By Windows 7

Jan 19, 2011

Trying to install the Linksys AE1000 wireless adapter on Windows 7 x64. So I follow the instructions. insert CD. Insert adapter.The i get this error:
 
"Linksys Wireless-N Router requires that wireless connections are to be managed by the Microsoft Windows Wireless Connection Manager. Some laptops and computers are pre-loaded with a different wireless connection manager which prevents your Valet or Linksys Wireless-N Router installation from loading. If this is the case, then you will need to disable or turn OFF the other wireless connection manager, and enable the Microsoft Windows Wireless Connection Manager instead."
 
What manager? This is windows 7, I'm not using any third party wireless utility so I don't understand why I'm getting this particular error. If windows wireless connection manager is off, how do I enable it?I've always managed my network setting through the Network and sharing center,I've tried:
 
(1) sweeping registry files before install(2) Plugging in AE1000 first and manually installing drivers
 
When I did this, the device shows up successfully in device manager and the driver installs smoothly, however when I go to network adapters, the AE1000 is listed as disabled. I tried enabling it but to no avail. Running the network diagnostics claims the driver doesn't work despite the fact that it installed successfully.
 
After several restarts and disabling/re-installations I recieve the same error.The end goal is to connect the AE1000 to a Cisco E3000 router.

View 2 Replies View Related

Cisco :: LMS 4.1 Credential Verification Report

Nov 6, 2011

when running Credential Verification Report, I get following notification: "None of the devices have credential verification data".I have made different Default Device Credential sets that I'm using when I add devices to LMS. I could not see wether this is bug in LMS 4.1 or if I have to do this a different way?

View 1 Replies View Related

Cisco :: 7921 Certificate Verification Failed

Mar 31, 2009

I am trying to install a digi cert on a 7921 and I get the message on import of "certificate verification failed".as there does not seem to be much documentation with the above error message.

View 2 Replies View Related

Cisco :: LMS 4.0 Device Credentials Verification Report?

Jan 3, 2012

I have a problem when doing this report. If I do a device credentials report on a user defined group (40 devices) 11 of these devices fails to connect via SSH. I can make an SSH connection to all 11 devices from the CiscoWorks server, but 11 devices still fails on the report
 
     Device Name     Read Community   Read Write Community            SSH
1. 149.212.XXX.164      Ok                          Ok                         Failed to connect. 
2. 149.212.XXX.153      Ok                          Ok                         Failed to connect. 
3. 149.212.XXX.152      Ok                          Ok                         Failed to connect. 
4. 149.212.XXX.151      Ok                          Ok                         Failed to connect. 
5. 149.212.XXX.150      Ok                          Ok                         Failed to connect. 

[code]....

View 2 Replies View Related

Cisco :: LMS 4 / Device Credential Verification Failed

Aug 16, 2011

i get for all devices telnet credential failed in my credential verification report. I exported the device from the Device Manager into a csv file to verify the correct passwords.The export shows the correct values in

<DEVATTRIB Name="primary_username">cwuser</DEVATTRIB>
<DEVATTRIB Name="primary_password">secretpassword</DEVATTRIB>

View 4 Replies View Related

Cisco :: Prime LMS 4.1 Credential Verification - Nexus SSH Fails

Feb 21, 2012

I recently installed and configured the Prime LMS 4.1 Soft Appliance. After discovering the devices on the network I ran a credential verification check on everything. All of my devices passed accept for the Nexus 7010s and Nexus 5020s -- these show up in the failed device report with a BLANK value for SSH and "Did Not Try" under Enable by SSH. I have verified SSH is enabled and accessible outside of Prime, and that there are no access lists preventing access. All other tests pass for these devices.
 
I've also visited the troubleshooting workflow section for these devices, and when I test the connectivity, SSHv2 passes.
 
I've downloaded all of the updates available for the device packages and have tried other credentials. All other aspects seem to be working properly.

View 10 Replies View Related

Cisco Switching/Routing :: 891-W Access Verification Prompt?

Jan 25, 2013

Recieved this unit from an individual who has very little knowledge (like myself) with the 800 series.
 
I'm having issues just getting into this device, when I power it on and console into the unit i am presented with an "Access Verification" prompt that requires credentials that I do not have/know.
 
At some point (not sure how) I managed to get to a "yourname#" prompt at which point I configured using this document here and created a username and password and some other basic settings, I saved the config and did a reload and it takes me right back to that "Access Verification" prompt.
 
Sould I be using the CCPE to gain access to this device instead? Is there a way to recover that "Access Verification" username and pass? How did I ever get to that "yourname#" prompt?

View 7 Replies View Related

Cisco WAN :: 7206VXR / Re-route Path Verification Failed (protected)

Jun 4, 2012

I'm trying to troubleshoot a problem with mpls fast reroute. The primary (protected) link is between PE-PE and the backup link is PE-P-PE. The IGP I'm using is OSPF. When there is a issue with the primary link and debug mpls tra tunnels signalling there is a message "LSP-TUNNEL-SIG: TunnelX [237]: re-route path verification failed (protected) [Can't use link x.x.x.x on node x.x.x.x]". After 30 seconds (without ospf tuning) the SPF is recalcalated, but that's not the point    From the show mpls tra tunnels tu1013 (the backup one)everything looks ok:

Status:Admin: up     Oper: up     Path: valid   Signalling: connected From show mpls tra fast-reroute database everything is ok, the status is Ready I'm using 7206VXR, Version 12.4(24)T3

View 0 Replies View Related

Cisco Switching/Routing :: Cat 6509E 6Kw PS AC Input Level Verification

Oct 27, 2011

I have a 6509E switch with dual 6Kw power supply that is logging "Power supply 1 input has changed.  Power capacity adjusted to 2671.20W" then will bounce back to normal at random times from 1sec to 10sec. Is there a command to check what each input level of the power supply to try to identify possibly which source is causing the problem? The power supply input lights remains green while this is occuring.

View 3 Replies View Related

Cisco AAA/Identity/Nac :: ACS5.1 - Machine Certificate And AD-Account-Verification

Aug 2, 2011

We plan to use machine certificates on our notebooks with Windows Vista. Our authenticating server is Cisco ACS 5.1. To access the wireless network we want to use the machine certificate of the notebook and a verification of the corresponding computer account in the Active Directory. What authentication method is the best to check the machine certificate and if in the Active Directory exist the enabled corresponding computer account ? How to configure the ACS and the notebook to use it like described ?

View 1 Replies View Related

Cisco Switching/Routing :: 3550 - Port Security Verification

Apr 1, 2013

I'm trying to test port-security in my c3550 but when I show port-security int f0/23 shows it only "Disabled" as below:
 
run
interface FastEthernet0/23switchport access vlan 200switchport mode dynamic desirableswitchport port-security mac-address stickyspanning-tree portfast 

View 2 Replies View Related

Cisco Switching/Routing :: WS-C6509-E - Verification Of Services And Protocols

Sep 19, 2012

Network newbie need to verify all necessary services and protocols on a new WS-C6509-E are turned on.  This layer 3 switch will be used to connect to servers.
 
Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXI9, RELEASE SOFTWARE (fc2)

[Code]....

View 6 Replies View Related

Cisco Firewall :: Verification Of Management Interface Usage On 5510

May 24, 2012

I seem to get conflicting information on using the Management port as a regular routed interface on the ASA5510..The management interface can be used for the traffic that passes through the firewall as well. The Security Plus License for the ASA 5510 is required in order to use the management0/0 port as a regular interface. With a base license on the 5510, the management0/0 port cannot be used as a regular interface.
 
I believe that I saw another post that mentioned it was part of the standard IOS if you had a later version.

View 2 Replies View Related

Uninstalled Network Adapters As Laptop Was Acquiring Network Address?

May 20, 2012

... and made a fundamental mistake of uninstalling adapters hastily without looking into it. Now when I try to re-install the adapters, I'm running into difficulties. Specifically, I don't have the CD-ROM I originally must have used, and the following message is popping up: "Files Needed - The file 'atl02_2k.sys' on Atlansic Fast Ethernet Adapter Installation Disk is needed. Type the path where the file is located and then click OK." Unfortunately, I don't have any idea if there is a path where this is located, so installation cannot complete.

The reason I took this option to begin with was that the wireless connection on my laptop [Asus, Windows XP] was acquiring network address without ever connecting fully to the internet. I had previously tried another of other methods, such as manually entering an IP address, to no avail.

View 7 Replies View Related

Multiport Network Adapter Versus Separate Network Adapters

Apr 2, 2013

I am looking for some information concerning network adapters. Many server vendors (HP, Dell, IBM and so on) use multiport single network adapter (one card,several ports -let's assume 4 ports). What resources are shared in multiport solution? For example:

- does multiport nic has significant limitations? For example, it's cpu cannot handle full 4-port load?
- interrupt sharing?
- buffer size?

View 3 Replies View Related

Have 2 Network Adapters?

Oct 19, 2011

I want to use 2 network adapters in the same computor. 1 will route thru our domain/network/firewall/internet. The other will bypass everything and go straight out the same internet but through a different router. I need to get to a website that for some reason our firewall blocks a few functions on that site. When I bypass the firewall everything is good.

View 1 Replies View Related

Cannot Find Network Adapters

Jun 23, 2012

I am using Thomson moden. Recently when ever I start Skype the moden stop working and is held up, requiring to reset. On trouble shooting : 'Cannot find network adaptors' appears. After resetting work well with all other programmes. Took my coputer to another place and another moden- skype works well.

View 3 Replies View Related

Message Saying It Had Two Network Adapters?

Jul 29, 2012

It did work ok but not now.Even after I put the setup disc into it, it does not show that it has recognised the router. I can only get it to work by using an ethernet cable. I tried to install my router onto it and it came up with a message saying it had "two network adapters, please click on one of them" or words to that effect. It didn't show anything to click onAlso she has recently bought a new desktop computer (Windows 7) and when I was looking into the routers settings it is still showing her name of the old PC she has scapped in the Network. Therefore on the BASIC NETWORK INFORMATION screen it says Network 2. I know this is probably not important but if she ever buys a new PC in the future it will show Network 3So what can I do to get rid of the old computer name on the router settings?

View 1 Replies View Related

How To Set Up Dual Network Adapters

Jun 27, 2011

I just upgraded his personal computer. It has an internal wireless card and we have a USB wireless adapter installed.What is the proper way to configure one adapter to connect to the network (via the existing linksys router) and the other adapter to connect to the ATT Hotspot? The goal being able to access the internet from the PC while still being connected to the network. Not interested in sharing the internet connection across the network or anything.It works sometimes, but establishing and maintaining a working connection to both simultaneously is not consistent. From the internet research I've done, it seems like there can be issue with the IP addresses, but I can't find a tutorial for my exact situation.

View 1 Replies View Related

Can Mix Plug In Network Adapters

Aug 26, 2012

I currently have a set ( 2 ) of these plug in the wall network adapters so I can use my gaming pc in the other side of my house. I am looking to hook up my gaming pc to my printer which is upstairs by using this same method but obviously only need one ( to plug the printer into ) so I was wondering if I bought one of these network adapters, which I can get for5 all in including delivery, would I be able to sync it to work with my existing adapters

View 4 Replies View Related

LAN Does Not Appear In Network Connections?

Aug 17, 2012

The problem started a few days ago, with no apparent catalyst. I'm running Windows XP SP3 on a computer I built myself. The ethernet controller is built into my motherboard, an ASUS P5Q SE PLUS. As far as I can determine, the ethernet controller is a Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC. Here's the ipconfig that I ran:

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsOwner>ipconfig /all

[Code]......

View 2 Replies View Related

Network Adapters Not Working In Windows 7?

Jul 28, 2011

I am having problems with any type of Network Card or Network USB adapter working with my PC running Windows 7. I had a LinkSys WMP54G PCI card working on this computer about a year ago as I was needing to use a wireless connection but then I didn't use it for 6 months. When I went to use it again, it wouldn't pick up connections at all.Thinking it was an issue with the card, I picked up a Edimax 7612UAn USB adapter thinking it should work out of the box. When I plug the USB adapter in, the standard Windows driver installation tries to run but an error message occurs stating "Device driver software was not successfully installed" accompanied by "Realtek RTL8191SU Wireless LAN 802.11n USB Failed". If I try to install the drivers manually, nothing changes and in Device Manager the following error message is displayed under Device Status "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)".

View 3 Replies View Related

Network Adapters Not Working In Windows 7

Jul 27, 2011

I am having problems with any type of Network Card or Network USB adapter working with my PC running Windows 7. I had a LinkSys WMP54G PCI card working on this computer about a year ago as I was needing to use a wireless connection but then I didn't use it for 6 months. When I went to use it again, it wouldn't pick up connections at all. Thinking it was an issue with the card, I picked up a Edimax 7612UAn USB adapter thinking it should work out of the box. When I plug the USB adapter in, the standard Windows driver installation tries to run but an error message occurs stating "Device driver software was not successfully installed" accompanied by "Realtek RTL8191SU Wireless LAN 802.11n USB Failed". If I try to install the drivers manually, nothing changes and in Device Manager the following error message is displayed under Device Status "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)".

View 1 Replies View Related

Installed D-Link No Network Adapters

Jul 31, 2011

I just installed a fresh copy of XP on an old Dell E310 my wife and kids use. Just an FYI, I used D-link prior to the re-install with no issues for a few years. Anyway, after XP was up, I put the D-link drivers on. The internet came up and worked like normal for 5-10 minutes, then 'poof', gone. Each time I attempted to connect after that I got a warning message stating I do not have network adapters? I was under the impression that is what D-link was?

View 1 Replies View Related

No Active Network Adapters Found?

Sep 25, 2011

i jus restarted my computer and i cant connect to the internet... it says im connected on the bottom corner and even my network connections says connected to wifi. I am using a netgear flash drive plug in. but wen i go to my task manager under the networking tab it says that there are no active network adapters found... what do i do?

View 1 Replies View Related

Using Multiple Network Adapters With VMware?

Jan 9, 2012

Can I have some programs use my wireless connection, and some use my wired? they are connected to two different networks, (wired - school, wireless - phone tether).Also, is it possible to have two virtual machines be connected to two different network adapters, ie. wired and wireless?

View 4 Replies View Related

Windows Cannot Use Wireless Network Adapters

Feb 25, 2013

I have a weird issue with my daughter's laptop. It will connect to the wired network, and give internet access, but it won't allow any connections via a wireless network adaptor.The laptop is on Windows 7 Home Premium 64 bit.In device manager it says the wireless adaptor is working properly. The drivers are the latest. Down in the notification area it says "not connected - no connections are available". She has a wifi switch (Fn+F3) on the laptop, but switching it makes no difference. I have an old desktop pc that connects via a USB wifi dongle, so I plugged the dongle into the laptop. It installed without problems, but in the notification area it says the same thing, "not connected - no connections available" So now I'm thinking, "what sits between the network adaptors and Windows? How come it will connect on wired, but not wireless?"

This all started when I updated her Atheros wifi driver. From that moment on it wouldn't connect using wifi. I thought I had somehow physically broken the wifi adaptor hardware, so I bought a new one (a Killer n1202), but installing it made no difference. It's as though I have somehow altered the way that Windows communicates with any wireless adaptor.When I go to the command line and type "ipconfig /all", there is no entry for "wireless LAN adaptor wireless network connection", as there is on my other laptop.

View 17 Replies View Related

2 Internet Connections Under 1 Network?

Feb 10, 2013

i have 30 pcs hooked up under one network. all 30 sharing 1 internet connection. 10 of those are put in a separate room for certain reasons. but those 10 like to download and cause lag to the other 20 pcs. my plan is to keep the 30 pcs under 1 network but ill add another internet connection exclusively for the 10pcs. and the original internet connection exclusively for the 20 pcs. how can i do that? reason why i need all 30 in the same network is cause they all use softwares needed to be connected to each other locally.

View 3 Replies View Related

No LAN Showing In Network Connections?

Aug 19, 2012

I have a desktop PC where the only internet connection is via a 'USB mobilebroadband dongle'.I have connected the PC via ethernet cable to the ethernet port on a d-link wifi router (which isn't connected to the internet).I'd like to be able to connect other non-PC devices (eg my mobile phone) to the router via wifi in order to connect to the internet.To do this, I gather that one possible solution is to bridge the LAN (not connected to internet) and dongle (connected to internet) connections.My first problem is that in 'Network Connections', only my USBdongle connection is shown (see pic) - there is no icon for the LAN/ethernet. In device manager, the "Atheros AR5007EG Wireless NetworkAdapter" and "Realtek PCIe FE Family Controller" are both showing without any ?

Other info:I'm running Windows 7 Home Premium 64 on a HP Pavilion All-in-one MS200 desktop.

View 6 Replies View Related

No Wireless Connections To Nas In Network

Aug 22, 2011

I have a NAS connected to my network and all the computers/laptops can use it if connected via the ethernet (all use various operating systems, no static ip's). as soon as I try and use them on the wireless none of them will see the nas, they are all connected to the network and can use the internet, just no connection to the nas.My Router Ip is 192.168.1.1 and my nas IP is 192.168.1.254, I have tried setting the nas to automatically getting an ip from the router aswell but this still doesn't make any difference.

View 7 Replies View Related

Use Dual Network Connections?

Sep 9, 2011

i have dual network connections.and i want to divide them. 1 for browsing on internet browsers and the 2nd for heavy downloading.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved