Installed D-Link No Network Adapters
Jul 31, 2011
I just installed a fresh copy of XP on an old Dell E310 my wife and kids use. Just an FYI, I used D-link prior to the re-install with no issues for a few years. Anyway, after XP was up, I put the D-link drivers on. The internet came up and worked like normal for 5-10 minutes, then 'poof', gone. Each time I attempted to connect after that I got a warning message stating I do not have network adapters? I was under the impression that is what D-link was?
View 1 Replies
ADVERTISEMENT
May 18, 2011
I have a wireless adapter WMP54G for a long time, but recently i updated to windows 7 and the problems begun.
After read a lot of stuffs about this problem, i downloaded a driver by RALINK and installed de adpter. But......on the installation, show two hardware: one is the adapter Linksys WMP54G...and the other can't be installed. So..on the Device manager appear like "unknown device" on the three of "USB controllers"
So...i'm already try a lot of things and can't install this adapter
View 4 Replies
View Related
Dec 19, 2010
Using a WUSB54GC that's installed on a PC and then used in a DVD recorder.So the installation procedure takes place on the PC.After installation WUSB54GC is disconnected and placed in DVD - recorder. I want my DVD recorder on my home network in order to be able to burn movies.
View 3 Replies
View Related
Aug 31, 2008
My husband got new computer. Installed the driver for his WUSB11 adapter and nada. Windows says the driver isn't installed. Linksys says its running
View 9 Replies
View Related
Mar 17, 2011
I am using the USB network adaptor, Model : WUSB600N version 2. It has worked fine whenever I have needed it. Except now. I received “Your adapter may not be installed properly”” ERROR 211: The network adapter is not installed properly” message last night. Also the Windows pop-up message: “USB device not recognized” message. I removed the adaptor and reinstalled it into another USB port. The same thing happened. I moved it again to a third USB port, I received the same error on all five of my PC’s USB ports. I was not able to access the network at all last night.
I brought in laptop into work today , because the antenna/extension is kept there. I inserted the adaptor and it started right up. After an hour of usage, I disconnected the antenna and the adaptor and reinserting the adaptor without the antenna directly into the USB port. And it still worked fine.I turned the PC off, disconnected everything and went to lunch. When I returned, booted up the PC, and inserted the adaptor and, once again got the error message: “ERROR 211 – The network adapter is not installed properly…. I tried again, this time using the antenna, and it is up and working for now.
View 1 Replies
View Related
Jan 29, 2011
I am trying to install a WPC54G adapter in a Compaq EVO N610C Laptop with Windows XP SP3 and it has a Texas Instrument PCI-1420 CardBus Controller. Adapter is inactive. I have uninstalled, reinstalled, download updated drivers from Linksys.
View 1 Replies
View Related
May 7, 2012
What are the maximum number of AE2500 wireless adapters can be installed on a PC running Windows XP SP3 using the windows wireless zero configuration? Recently I'm working on a program that needs multiple seperate wireless connections on a Windows XP SP3 PC. Each wireless adaptor is given a static IP address to respond to traffic at some specific ports. I can install four AE2500 adaptors without problem, but it disconnects the first AE2500 device when I plug in the fifth AE2500 adapter. I've tried on different windows XP machines. They all get the same problem. I wonder if it is a limitation in the AE2500 driver.BTW I've also tried to install an Valet AM10 adaptor as the fifth adapter, it seems ok. Yet installing more AM10 adapters beyond the fifth (4 AE2500 + 1 AM10) requires some luck. It may disconnect the other AM10 devices when I plug in another AM10 adapter.
View 1 Replies
View Related
Sep 12, 2011
Recently got windows 7 and just bought the linksys usb adaptor AE1000. It installed fine and internet was working. Once I rebooted it dissapeared. It is sitting in my device manager but is unamed and has a ! error on it.
View 1 Replies
View Related
Mar 4, 2012
I am having problems after installing the ae2500 adapter in my win 7 machine had to remove malwarebytes and avg to get it to work but now it constantly has problems dropping the internet connection. I have to disable the adapter then enable it to reconnect to the internet. Are there other compatibility problems with this setup that I need to address?
View 1 Replies
View Related
Nov 23, 2012
My situation is as follows: A modem in the hallway closet with an internet connection via a coax cable. A living room with an i Mac and a Philips PFL9604 TV connected to the wireless network. The wireless network is provided by a new TP- Link TL-WR1043ND router which is setup next to the modem.
I would like to do the following:
Stream content such as HD movies, shows etc from the i Mac to the TV. Use the TV to watch missed shows with the apps on the TV via internet. Make use of the internet speed upgrade (75 - 150 m bit/s) which will come in a few months. However the signal of the router currently isn't strong enough to maintain a stable connection since it's too far away. The distance from the router to the TV and the i Mac is 12 meters and 6 meters with a wall in between as well. Now I can't move the modem from the hallway closet else the signal to the modem will be too weak nor can I wire an utp cable from the hallway to the living room and put the router there.
I have come up with two possible options now:
Use power line adapters by plugging one into the hallway socket and one in the living room so I can put the router there.
I currently have these power line adapter to try out, however my internet connection occasionally drops while using these adapters. Take the old WRT54GL router or a second TP- Link TL-WR1043ND and use WDS to create 1 network and have good coverage in the living room. The i Mac and TV can then be connected via Ethernet cables to the second router if necessary. I assume it would be best to place the second router closest to the first one for the strongest signal.
The second options seems the best to me as the power line adapters don't seem very promising based on my experience so far. I would like to know if connecting two routers is a viable method to obtain good and stable coverage in the living room?
View 1 Replies
View Related
Nov 18, 2011
Several months ago I installed D-Link's DIR 655 on my W7 x64 PC. Everything worked fine including NetFlix and being able to view photos located on my PC on my Sony TV. The TV is connected via wired Ethernet cable from the D-Link and I use my cable service signal from the router to the TV.
Then I had to reinstall my OS and although I can still view all the cable companies offerings, including NetFlix on the TV, I'm no longer able to see or view images located on my PC on the TV. I didn't change any of the wiring.
I tried reinstalling the D-Link CD but I can't find where it installs on my PC. It's not listed in the Device Manager or in Programs. I'm wanting to know what version of the D-Link driver I have and to be able to view photos and videos on my TV that are located in shared folders on my PC. I'm the only one who uses the PC.
View 4 Replies
View Related
Feb 7, 2011
To fix a bunch of other problems I've installed the 313NA firmware on my rev. C2 DIR-615
I can connect to my ISP and DHCP just fine, and I get DNS servers back just fine, but the DIR 615 doesn't serve DNS correctly for the devices on the LAN. If I set the LAN machines' DNS manually to the IP addresses provided by my ISP they can look up hosts just fine. With them pointing at the DIR 615 for DNS they get nothing.
When I attempt to perform a name lookup using the admin System Check -> Ping Test I get "Unknown Host". The same name lookup up by any other LAN machine using the same DNS hosts gets the correct result. I've made sure there's no caching.
View 14 Replies
View Related
Apr 10, 2012
I setup sharePort today and attached an external 1 TB hard drive. Seems that All my internet connections are slow now. I have a seperate PC that I use VPN to connect to work with and suddenly its very slow. My wife said her laptop suddenly slowed down too. The PC that I installed SharePort software seems slow too. Is/can SharePort be dragging down the router? I turned off the external HD and it's still slow.
View 14 Replies
View Related
Aug 17, 2011
While I have been VERY happy using my DIR-655 for the most part, all wireless routers have limitations for expansion across your home.I got my TrendNet TEW-640MB installed last night, and it talks to the 655 perfectly, and now I have 4 ethernet ports at distance across my house. I have also used a couple TrendNet TEW647Ga single port wireless bridge for other parts of my home, but with only a single Ethernet port, you still need a little switch/hub to get the extra ports.
Because these units speak .11N at 300 Mbps, it takes full advantage of the technology the 655 gave me when I bought it back in 2009 (??).
View 5 Replies
View Related
Aug 18, 2011
i just bought and installed tp link wireless G usb adapter TL-wn422G.
i was tring to connect to the internet but after about 30 second the connection to the internet was terminated, and i need to unplug the device and replug it , in order it will work again (for about 30 seconds more).
i have an edimax router and all my other devices are connect perfectly (laptop, iphone , galaxy s)
View 6 Replies
View Related
Jan 13, 2013
I recently lost network connection using the built-in Intel(R) WiFi Link 5100 AGN. Stupidly, this happened while I was still under a Service Contract, but due to the holidays, I put it off and the contract expired the middle of December. I have a Studio 17/1745, I disconnected the internal WI-fi card and use a USB D-Link N and I now have WI-fi. Should I purchase a new internal WiFi card and if so which one.
View 1 Replies
View Related
Mar 30, 2011
We currently use the DIR 655 in our home. I has a great range, and we've never had any problems. Our house is a very tall Victorian, so some areas don't get as strong a signal as others. I'd like to set up a few addition devices to extend the coverage of our network.
I installed a DAP 1522 as a bridge to our entertainment PC. After a while of trying to sort out how to configure it everything is working there. The 1522 is connected to the PC via cable.
I still want to extend the overall wireless range to better cover the lower floors and back porch.
From reading the manual on the 1522 I am a bit confused. I understand how it works as a bridge, connecting devices via cable. Will it also extend the range is set as an Access Point without needing the devices to connect via cable?
View 10 Replies
View Related
Dec 27, 2011
I just re-installed Windows XP Professional on my Dell XPS Gen 4. Everything works fine on it but the internet. I can open IE, but it just says "This page cannot be displayed" and on and on.Since I re-installed it I believe their are not many drivers on it, I don't really know, and I think that might be it but I am not sure. And I am not sure which drivers I need if it is missing drivers.
View 7 Replies
View Related
Feb 8, 2011
I added the network printer cum scanner - cm1312, going to control panel >> add printer >> etc. etc. Now I can print. But there is no scanner installed. What I can do?
View 5 Replies
View Related
Jun 20, 2012
My network drive is not working if i install antivirus. It shows 'access denied". if I uninstall, i can access the network drive.
View 3 Replies
View Related
Nov 23, 2012
I have 2 IBM Levono R52 1860 Laptops, both are running windows XP Pro, one has Intel PROSet Wireless WiFi that works perfectly. I installed PROSet Wireless on the other one and it won't work. It tells me that the network driver is not installed If I go to C:/programs, etc. the driver is in the folder. in device manager under Network adapters it shows Broadcom NetXtreme Gigabit Ethernet( which won't connect to my WiFi either) and PdaNet Broadband Adapter that will connect it to the net via my phone and a cable??
View 8 Replies
View Related
Oct 31, 2011
I just reinstalled windows 7 on my Intel i3 M380 laptop, and now I cannot connect to the internet wirelessly and I can't connect with a ethernet cable. In device manager, it says those devices aren't installed. I can't install them because the laptop has no internet. I can't seem to find the drivers for them either on intel. Seems like the reinstallation deleted my network adapter.. I can't find the correct link on intel.. I've tried like 3-4 on my laptop and none of them seem to work..
View 1 Replies
View Related
Nov 12, 2011
months ago, i installed a USB card so that my dvd burner could run at 2.0 or 3.0. it has worked fine. every now and then the card becomes unlodged from inside the computer, and i have to push it back into the slot.Tonight, while the computer was on, i was putting it back in, and it popped all the way out, my computer shut down and when i restarted it, i got the error message "windows did not find properly installed network adapter/ if you have network adapter update/re-install drivers"Only problem i have is when i go to device manager, i see NO network adapter?
View 8 Replies
View Related
Sep 5, 2011
I have just reformatted my Fujitsu A6120 lifebook laptop and I downloaded all the drivers and everything installed fine except for the Intel PRO/Wireless Network Driver. I even downloaded the driver from Support Downloads. After I installed it, a notification popped up in the task bar with the Intel(R) PROSet/Wireless saying Driver is not installed. edit: in device manager, under network adapters there is only the 1394 net adapter and there are yellow exclamation marks in other devices.
View 19 Replies
View Related
Oct 2, 2011
I purchased a new built system, worked great 5 days, major trojan forced a reformat of drive. Now Win 7 64 Device Manager is empty- no network adapter found - I get the notice that "there are no properly installed network adapters". I use the on-board network adapter on the mobo, no plug in network card, hard wired to DSL -- like I said, it worked fine for a few days now it's GONE after reformat.
View 10 Replies
View Related
Nov 11, 2012
My laptop keeps saying "Windows did not detect a properly installed network adapter.If you have a network adapter, you will need to re-insatll the driver". I've found the right one and it still want install. Says it's the wrong one but i'm pretty sure it's the right one. I just did a fresh install where i put windows 7 extreme on a laptop and i can't seem to ge the right drivers i guess. I don't know if it's the wrong driver or a bad NIC Card.
View 1 Replies
View Related
Jan 1, 2011
I just got a new hawking N range extender to run on our network. My parents just got a new Internet Ready TV for the holidays but the wireless doesn't reach to their room. I ordered this range extender to boost the signal from our Linksys E2000 router. I was having a hell of a time setting it up last night. I was hoping that I could have them both use the same SSID so they would basically be the same network with all of our laptops/iPhones/iPads seamlessly switching to the strongest signal. (Router is in basement, extender is on the main floor). Unfortunately just setting them up with the same name and WPA key doesn't work as easy as I thought it would. So as of right now I have the extender set up as a different network name and it is working great. (router SSID = name, extender SSID = nameE) I just want to know if there is a way to make it work with the same SSID. I've been trying to research and have come across forums saying they need to have ALL the info the same (SSID, PassKey, Channel) and others saying the channels need to be different.
Right now I left the extender setup with the default IP and made it static so I could access the web interface again because the CD installation that came with it is absolute garbage (you can't change the broadcast channel with it). I can get into the settings easily by using 192.168.1.240 but I am weary to try to change things around again because I already have set up and reset this guy at least 5 times.
View 1 Replies
View Related
Dec 15, 2012
just joined but i had a virus on my laptop which i had to re-install windows 7 ultimate (not through a CD) so i log back in my laptop to find my f-keys aren't working and that i cannot connect to the internet without the ethernet cable , beside my network controller it has a yellow exclamation mark saying "windows cannot find the driver code 28"
im running windows 7 ultimate on a dell inspirion n5010
View 11 Replies
View Related
Mar 23, 2012
I have 2 linksys routers installed on my home network. The primary router is a linksys WRT360n and is stationed inside the main home, while the 2nd is a linksys WRT160N located in my office. I've connected them via the lan to lan configuration and have disabled DHCP server on the 2nd. I can access the 2nd router via my primary PC but am unable to access the internet or see the primary from the PC connected to the 2nd router.
View 3 Replies
View Related
Apr 28, 2011
We moved to a different city and trying to access any available network but can't connect. Says no network found. I click diagnose and it says "This computer does not have a wireless network adapter installed and configured"
View 1 Replies
View Related
May 18, 2013
i have to re-installed windows 7 on my Dell Inspiron 15r but now can't connect to the internet, the device manager shows the network controller in not installed at well as the PCI Simple Communications Controller.
View 1 Replies
View Related
Dec 6, 2011
I tried to add PCI express 1000/100 network card to my Inspiron 620 (ST1000SPEX from StarTech.com). When I power the box, I get no video, either HDMI or VGA. Tried two different cards in all three slots - always the same :-(
How can I add more networking to my box (WiFi is not useful to me) - I need to have at least 2 separate LANs from this box.
View 5 Replies
View Related
May 30, 2013
I have a Dell Inspiron N5030 laptop that I just installed a new hard drive in. Prior to the new install had no issues with wireless connectivity, now I have none. I have researched this issue for the past three days without success.
I also installed a new wireless card which still did not solve my problem. As I said, this is a Dell Inspiron N5030. Operating system is Windows 7 32-bit The network adapter is an Atheros AR8152 PCI-E Fast Ethernet Controller.In the Device Manager the Network Controller is listed under "Other Devices" The new wireless card installed is listed as a DNXA-95-D1. That is really the only information I can give you about this card.
Side note: I can get on the internet if I hard wire in, just can't access internet wirelessly.
View 5 Replies
View Related
