D-Link DIR-615 :: DNS Not Working With 313NA Installed?
Feb 7, 2011
To fix a bunch of other problems I've installed the 313NA firmware on my rev. C2 DIR-615
I can connect to my ISP and DHCP just fine, and I get DNS servers back just fine, but the DIR 615 doesn't serve DNS correctly for the devices on the LAN. If I set the LAN machines' DNS manually to the IP addresses provided by my ISP they can look up hosts just fine. With them pointing at the DIR 615 for DNS they get nothing.
When I attempt to perform a name lookup using the admin System Check -> Ping Test I get "Unknown Host". The same name lookup up by any other LAN machine using the same DNS hosts gets the correct result. I've made sure there's no caching.
View 14 Replies
ADVERTISEMENT
Feb 19, 2011
I turned on the monitor (I had left the system running) and it said that it had recovered from an unexpected shut down. It didn't automatically connect to the wifi, so I opened the connections window to connect to a network and it said "Windows cannot find any networks." I refreshed several times and nothing happened. I clicked the option underneath "Diagnose why windows can't find any networks," and it came back with "This computer does not have a wireless adapter installed and configured." I then opened up the device manager, and under network Adapters, the only thing is "Intel(R) 82566DC-2 Gigabit Network Connection." I checked it out and it says it's working properly, and I believe that this adapter is for when you actually connect a cable directly to the PC.
View 4 Replies
View Related
Apr 28, 2012
I can not set up and access to my wireless application on my DELL Inspiron 510 m.I have installed all drivers from "network" category, but my wireless network does not show in my "network places" on Windows XP.
Wireless adapter is enabled in BIOS and I have used Fn+F2 to turn off and on wireless device, but still nothing.
View 9 Replies
View Related
Nov 18, 2011
Several months ago I installed D-Link's DIR 655 on my W7 x64 PC. Everything worked fine including NetFlix and being able to view photos located on my PC on my Sony TV. The TV is connected via wired Ethernet cable from the D-Link and I use my cable service signal from the router to the TV.
Then I had to reinstall my OS and although I can still view all the cable companies offerings, including NetFlix on the TV, I'm no longer able to see or view images located on my PC on the TV. I didn't change any of the wiring.
I tried reinstalling the D-Link CD but I can't find where it installs on my PC. It's not listed in the Device Manager or in Programs. I'm wanting to know what version of the D-Link driver I have and to be able to view photos and videos on my TV that are located in shared folders on my PC. I'm the only one who uses the PC.
View 4 Replies
View Related
Jul 31, 2011
I just installed a fresh copy of XP on an old Dell E310 my wife and kids use. Just an FYI, I used D-link prior to the re-install with no issues for a few years. Anyway, after XP was up, I put the D-link drivers on. The internet came up and worked like normal for 5-10 minutes, then 'poof', gone. Each time I attempted to connect after that I got a warning message stating I do not have network adapters? I was under the impression that is what D-link was?
View 1 Replies
View Related
Apr 10, 2012
I setup sharePort today and attached an external 1 TB hard drive. Seems that All my internet connections are slow now. I have a seperate PC that I use VPN to connect to work with and suddenly its very slow. My wife said her laptop suddenly slowed down too. The PC that I installed SharePort software seems slow too. Is/can SharePort be dragging down the router? I turned off the external HD and it's still slow.
View 14 Replies
View Related
Aug 17, 2011
While I have been VERY happy using my DIR-655 for the most part, all wireless routers have limitations for expansion across your home.I got my TrendNet TEW-640MB installed last night, and it talks to the 655 perfectly, and now I have 4 ethernet ports at distance across my house. I have also used a couple TrendNet TEW647Ga single port wireless bridge for other parts of my home, but with only a single Ethernet port, you still need a little switch/hub to get the extra ports.
Because these units speak .11N at 300 Mbps, it takes full advantage of the technology the 655 gave me when I bought it back in 2009 (??).
View 5 Replies
View Related
Aug 18, 2011
i just bought and installed tp link wireless G usb adapter TL-wn422G.
i was tring to connect to the internet but after about 30 second the connection to the internet was terminated, and i need to unplug the device and replug it , in order it will work again (for about 30 seconds more).
i have an edimax router and all my other devices are connect perfectly (laptop, iphone , galaxy s)
View 6 Replies
View Related
Jan 13, 2013
I recently lost network connection using the built-in Intel(R) WiFi Link 5100 AGN. Stupidly, this happened while I was still under a Service Contract, but due to the holidays, I put it off and the contract expired the middle of December. I have a Studio 17/1745, I disconnected the internal WI-fi card and use a USB D-Link N and I now have WI-fi. Should I purchase a new internal WiFi card and if so which one.
View 1 Replies
View Related
Mar 30, 2011
We currently use the DIR 655 in our home. I has a great range, and we've never had any problems. Our house is a very tall Victorian, so some areas don't get as strong a signal as others. I'd like to set up a few addition devices to extend the coverage of our network.
I installed a DAP 1522 as a bridge to our entertainment PC. After a while of trying to sort out how to configure it everything is working there. The 1522 is connected to the PC via cable.
I still want to extend the overall wireless range to better cover the lower floors and back porch.
From reading the manual on the 1522 I am a bit confused. I understand how it works as a bridge, connecting devices via cable. Will it also extend the range is set as an Access Point without needing the devices to connect via cable?
View 10 Replies
View Related
Sep 27, 2012
i have a d-link wireless router model DIR-601 and all the lights keep turning on and off besides the power
View 1 Replies
View Related
May 16, 2008
How to unblock limewire cuz its not working after i installed a DIR-655 at home.
View 3 Replies
View Related
Jun 6, 2012
I have bricked my DIR-825 when performing an upgrade of DD-WRT. Now I am not able to go on to the Recovery Web page. ( 192.168.0.1 ) after performing the 30/30/30 rule, wich always worked before.
I had done an update of dd-wrt and lost all of my wireless adapters, they said to load open-wrt, find the caldata and write this. This all worked. But after a reboot, the deviced bricked on me .
View 3 Replies
View Related
Jul 18, 2012
I just upgraded from DIR 615 to DIR 655. I used the installation CD but I have no wifi signal detected. Wired connection with 655 works though. If I go back to 615, wifi works.
View 1 Replies
View Related
May 4, 2011
I'm having problems connecting my ip phone with DIR-615.I got a plug and use ip phone from vocalocity, it's actually from the office where we also had the same problem and a the end we just changed to a different router coz we didn't have time to look for solutions, anyways i brought one of the phones to my house and plugged it to the d-link but it's not working.
View 12 Replies
View Related
Oct 15, 2010
I tried to find an answer to my issue however came up short. Did find,url... but that for a 600 not 601. I have "Mac filtering on and to only ALLOW the addresses below" however, it allows any computer, even if i do not have them listed.
View 3 Replies
View Related
May 19, 2011
Recently, something weird occurred. My Motorola Surfboard cable modem (on PenTeleData/Service Electric) and my D-Link DIR-655 don't seem to be getting along.If I plug a network cable directly from the modem into a computer, it works fine. However, if I go from the modem to the router's WAN port, it doesn't seem to want to connect to the router at all (no matter what DNS settings I change on the router (including spoofing the MAC address of a working computer) or which network cables I use; the "activity" light on both the router and the modem remain off).Also, if I take a network cable and plug one end in one of the LAN ports on the router and the other end in the WAN port, it works (well, the "internet" activity light on the front of the router comes on and the status page at http://192.168.0.1/Status/Device_Info.shtml says "Cable Status: Connected; Network Status: Incorrectly configured - check logs" instead of "Cable Status: Disconnected; Network Status: Disconnected").
View 11 Replies
View Related
Apr 3, 2011
how to get web logging working? I set up an Access Control policy for web logging only for one machine on my network. I also turned Syslog on and have Kiwi syslogd running on my desktop. However, it's not logging web traffic. how to get web logging working correctly?
View 4 Replies
View Related
Oct 17, 2011
I have Ver E3, with firmware 5.10. Like it says above, Wireless N is not working. I've already going into Manual Wireless set up and selected Mixed G and N. All of my devices will connect, but only as G devices.I'm reluctant to set it to "N only" for fear that none of my devices will be able to connect.
View 14 Replies
View Related
Mar 14, 2013
The 5 GHz has been working for 2 months but now, no longer available. No visible 5GHz wireless network. Reset to factory setting and reinstalled but still no 5 Ghz. The 2.4Ghz is working fine.
Location Australia
fcc id: KA2IR835A1
IC: 4216A-IR835A1
P/N: IIR835NAU...A1E
S/N: QBKA1C5001387
WPS PIN: 24784784023
H/W Ver: A1 F/W Ver: 1.01
View 1 Replies
View Related
Feb 19, 2013
I have a D-Link DIR-615 router and can't get the internet working and have done everything possible to get it working. the globe light which is the internet light will not turn from amber to green. I have done a factory reset which is why this occurred in the first place. After the reset the globe stayed orange and the internet refused to work now everything is up but the wireless will not work nor the internet I have gone through both the manual set up and set up wizard and tried all options.
View 8 Replies
View Related
Nov 11, 2011
I have been using a d-link router for some time now and since yesterday it has stopped working ( I have an orange 'world' light on all the time) After looking around this site I have tried resetting etc and nothing works. If I plug the ethernet cable into the modem I can get on the internet if I plug the cable into the router then nothing. These are the details I got from the config all when I plugged the ethernet into the router.
View 3 Replies
View Related
Mar 3, 2011
I have a D-Link wireless adapter (DWL-G122) that I have been trying to install on a Windows XP computer. After various uninstalls and reinstalls of the drivers and programs that come with it, I have found currently the best way to get it to work is leave the D-Link programs uninstalled and have Windows install the driver itself.The problem is, it doesn't seem to keep the drivers on restarting, so every time the computer is restarted, it must be installed again. This is not ideal.It occasionally worked when I installed from the CD, but the D-Link programs that would install with the drivers created problems of their own.
View 2 Replies
View Related
Jul 10, 2011
My router suddenly stopped working yesterday and I've tried everything I can think of to fix it. I have one computer wired directly in to it and a few laptops that use wireless connections.The power LED and the internet LED light up, but the status LED and the WLAN LED do nothing. Pushing the factory reset button on the back doesn't seem to do anything.Can't connect to the router site (192.168.0.1) The internet works fine when I plug in to it directly, so its definitely the router.
View 3 Replies
View Related
Jan 29, 2012
I bought a TP-Link TL-WR841N which i have managed to setup up properly, i am able to connect to the wireless and get internet access. However the minute i walk out of the room or a few meters away i am disconnected and i can't re-connect, i get the "windows cannot connect to TP-LINK" message. The signal strength in on excellent and i know it works because when i stand near it, it works perfect.I phoned TP-LINK technical support who were pretty useless and couldn't fix the problem.
View 3 Replies
View Related
Jul 20, 2012
im deployment and we have hardwire internet in my room. wanting to use all other devices eg. iphone and what not i bought a router to plug the hardwire in to and run the wifi off the router for all devices. its made by TP-LINK the model is TL-WR940N. it worked great for a while but then kept giving me DNS server is not responding but i could plug the hard cable in my computer and the internet would work fine? so i reset the router and set it all up again like before. Now i cant get it to run wifi off it anymore it recognizes and connect through wifi but no internet and its telling me i need to plud the hardwire in to my internet but my computer is recognizing it and saying i have internet access, but no internet i mean its not even thinking if there is internet.
View 1 Replies
View Related
May 7, 2011
I have a Dir 655 router how can I know if one of the antennas is working right?
View 5 Replies
View Related
Feb 5, 2011
It worked fine with my last router. It just doesn't seem to connect securely. It comes up under my iTunes, but once I go to enter the code, it doesn't show up as completed. Also, a utorrent monitoring app cannot connect to my computer, which is set up right at my computers end, but won't connect at all from my phone over wi-fi.
View 14 Replies
View Related
Mar 25, 2012
I need configuring the dsl-320t modem connected to the dir-600 router. Already tried some configuration, with dhcp enabled and disabled, tried to assign a static ip to the router and tried to put the modem in bridge mode, but fail miserably .Now I've resetted both devices, if I connect with the ethernet cable my pc and one of the four lan connectors on the router, and then use another ethernet cable to connect the modem port with one of the other three free router port, I can connect to internet. Any other configuration i tried has not worked.
View 9 Replies
View Related
Mar 22, 2012
Once every couple of days the wireless service seems to disappear. I've connected to the router from a wired computer and everything looks ok from the d-link panel, however its not showing up as an available wireless network on the wireless units. Pulling the power off for 30 seconds tends to get it working again. I'm configured bg and n. I need a mix... an old B laptop, have one machine that has a G NIC, and the rest are N.
View 14 Replies
View Related
Aug 1, 2011
Setup that was working. DCM-202 to AT&T Micro Cell to DIR-601 wi-fi.Now I can direct connect MacBookPro to DCM-202 and get internet. If I connect to DIR-601, either via ethernet or wi-fi, no internet. If I try another router, Apple Time Capsule, I get same result. If I just do an ethernet pass thru using the AT&T Micro Cell, still no internet. Basically, the DCM-202 will direct connect via ethernet to my laptop, but not pass thru an ethernet connection for any other devices.
View 1 Replies
View Related
Oct 26, 2012
My DIR-655 wireless has stopped working after a few years of flawless operation. It still works for wired operation. I was running Firmware 1.21, tried rebooting, resetting to factory, powered off the unit, etc. without success. Decided to Upgrade to the firmware to 135 NA, still no success. I am in British Columbia on Shaw Cable. On the Status Page under Wireless LAN, the Wireless Radio shows "Init failed".
View 3 Replies
View Related
May 10, 2010
I am using my DIR-825 as a switch and AP. I have turned off DHCP and plugged the internet into the lan-1 port. This works perfectly for IPv4, but I cannot get IPv6 to work. On the outside there is native IPv6 running radvd. How should I configure IPv6 on my DIR-825?
View 2 Replies
View Related
