D-Link DIR-655 :: How To Get Web Logging Working

Apr 3, 2011

how to get web logging working? I set up an Access Control policy for web logging only for one machine on my network. I also turned Syslog on and have Kiwi syslogd running on my desktop. However, it's not logging web traffic. how to get web logging working correctly?

View 4 Replies


ADVERTISEMENT

Cisco Firewall :: ASA 5520 - ASDM Logging - Disable Rules Logging

Nov 16, 2011

I'm encountering what I think is an issue on logging system on FW ASA 5520 - Asa Version 8.4(2), ASDM version 6.4(5). When I disabled the logging inside a rule from ASDM, or from console with the "log disable" option inside ACL, If I check in ASDM logging real time window I continue to see all the entry related to disabled rules. This is a correct behaviour about ASA logging ? How I can "hide" the entry related to disabled rules (this is what I need for troubleshooting purposes) ?

View 1 Replies View Related

D-Link DIR-615 :: Logging Activity On All Machines?

Jan 4, 2013

I am wondering if I can log all activity on my network.  Right now I can log activity with MAC addresses, but if I add a device I have to keep adding MAC address.  I also have to have several policies because I can only put about 7 MAC address in per policy.

I noticed the option to add 'other machines' and I am not sure how this works.  I have tried it and can't get it to work.

View 2 Replies View Related

D-Link DIR-825 :: Disabling Internet Sessions Logging

Jan 17, 2012

There is a page in the DIR-825 that logs your computers IP and the other IPs it is connecting to. I was wondering if there was a way to disable that function on select devices? My handhelds and legitimate computers that should be on the internet are filling it with spam and it is hard to check for unauthorized users on the network. If that is not possible, then would I be able to completely disable the feature?

View 1 Replies View Related

D-Link DIR-825 :: Get Both Allowed And Blocked Web Access Logging?

Nov 30, 2011

Is it possible to get both allowed and blocked web access logging?  I'm using the 2.06NA firmware and no matter how I configure the router, I just can't get it to work, so either I'm missing something or the firmware has a defect, I hope its me, but I fear its a defect.

View 6 Replies View Related

Cisco Switching/Routing :: 4500 For Logging Event Link Status Global

Feb 21, 2012

Why the IOS on 4500 doesn't support globally, although am running the IOS 12.2,need for logging event link-status global.

View 3 Replies View Related

D-link Router Isn't Working?

Sep 27, 2012

i have a d-link wireless router model DIR-601 and all the lights keep turning on and off besides the power

View 1 Replies View Related

D-Link DIR-655 :: Limewire Is Not Working?

May 16, 2008

How to unblock limewire cuz its not working after i installed a DIR-655 at home.

View 3 Replies View Related

D-Link DIR-825 :: Bricked - How To Get This Working Again

Jun 6, 2012

I have bricked my DIR-825 when performing an upgrade of DD-WRT. Now I am not able to go on to the Recovery Web page. ( 192.168.0.1 ) after performing the 30/30/30 rule, wich always worked before.

I had done an update of dd-wrt and lost all of my wireless adapters, they said to load open-wrt, find the caldata and write this. This all worked. But after a reboot, the deviced bricked on me .

View 3 Replies View Related

D-Link DIR-655 :: Not Working After Upgrading From DIR 615

Jul 18, 2012

I just upgraded from DIR 615 to DIR 655.  I used the installation CD but I have no wifi signal detected.  Wired connection with 655 works though.  If I go back to 615, wifi works. 

View 1 Replies View Related

D-Link DIR-615 :: IP Phone Not Working With It?

May 4, 2011

I'm having problems connecting my ip phone with DIR-615.I got a plug and use ip phone from vocalocity, it's actually from the office where we also had the same problem and a the end we just changed to a different router coz we didn't have time to look for solutions, anyways i brought one of the phones to my house and plugged it to the d-link but it's not working.

View 12 Replies View Related

D-Link DIR-601 :: Mac Filtering Not Working

Oct 15, 2010

I tried to find an answer to my issue however came up short. Did find,url... but that for a 600 not 601. I have "Mac filtering on and to only ALLOW the addresses below" however, it allows any computer, even if i do not have them listed.

View 3 Replies View Related

D-Link DIR-655 :: WAN Port Is Not Working?

May 19, 2011

Recently, something weird occurred. My Motorola Surfboard cable modem (on PenTeleData/Service Electric) and my D-Link DIR-655 don't seem to be getting along.If I plug a network cable directly from the modem into a computer, it works fine. However, if I go from the modem to the router's WAN port, it doesn't seem to want to connect to the router at all (no matter what DNS settings I change on the router (including spoofing the MAC address of a working computer) or which network cables I use; the "activity" light on both the router and the modem remain off).Also, if I take a network cable and plug one end in one of the LAN ports on the router and the other end in the WAN port, it works (well, the "internet" activity light on the front of the router comes on and the status page at http://192.168.0.1/Status/Device_Info.shtml says "Cable Status: Connected; Network Status: Incorrectly configured - check logs" instead of "Cable Status: Disconnected; Network Status: Disconnected").

View 11 Replies View Related

D-Link DIR-615 :: Ver E3 Wireless N Not Working

Oct 17, 2011

I have Ver E3, with firmware 5.10.  Like it says above, Wireless N is not working.  I've already going into Manual Wireless set up and selected Mixed G and N.  All of my devices will connect, but only as G devices.I'm reluctant to set it to "N only" for fear that none of my devices will be able to connect.

View 14 Replies View Related

D-Link DIR-825 :: DIR-835 5GHz Not Working

Mar 14, 2013

The 5 GHz has been working for 2 months but now, no longer available. No visible 5GHz wireless network. Reset to factory setting and reinstalled but still no 5 Ghz. The 2.4Ghz is working fine.

Location Australia
fcc id: KA2IR835A1
IC: 4216A-IR835A1
P/N: IIR835NAU...A1E
S/N: QBKA1C5001387
WPS PIN: 24784784023
H/W Ver: A1 F/W Ver: 1.01

View 1 Replies View Related

Have A D-Link DIR-615 Router And Can't Get The Internet Working?

Feb 19, 2013

I have a D-Link DIR-615 router and can't get the internet working and have done everything possible to get it working. the globe light which is the internet light will not turn from amber to green. I have done a factory reset which is why this occurred in the first place. After the reset the globe stayed orange and the internet refused to work now everything is up but the wireless will not work nor the internet I have gone through both the manual set up and set up wizard and tried all options.

View 8 Replies View Related

D-link Router Has Stopped Working

Nov 11, 2011

I have been using a d-link router for some time now and since yesterday it has stopped working ( I have an orange 'world' light on all the time) After looking around this site I have tried resetting etc and nothing works. If I plug the ethernet cable into the modem I can get on the internet if I plug the cable into the router then nothing. These are the details I got from the config all when I plugged the ethernet into the router.

View 3 Replies View Related

D-Link Wireless Adapter Not Working?

Mar 3, 2011

I have a D-Link wireless adapter (DWL-G122) that I have been trying to install on a Windows XP computer. After various uninstalls and reinstalls of the drivers and programs that come with it, I have found currently the best way to get it to work is leave the D-Link programs uninstalled and have Windows install the driver itself.The problem is, it doesn't seem to keep the drivers on restarting, so every time the computer is restarted, it must be installed again. This is not ideal.It occasionally worked when I installed from the CD, but the D-Link programs that would install with the drivers created problems of their own.

View 2 Replies View Related

D-Link DIR-625 Router Stopped Working?

Jul 10, 2011

My router suddenly stopped working yesterday and I've tried everything I can think of to fix it. I have one computer wired directly in to it and a few laptops that use wireless connections.The power LED and the internet LED light up, but the status LED and the WLAN LED do nothing. Pushing the factory reset button on the back doesn't seem to do anything.Can't connect to the router site (192.168.0.1) The internet works fine when I plug in to it directly, so its definitely the router.

View 3 Replies View Related

TP-Link TL-WR841N Not Working Properly

Jan 29, 2012

I bought a TP-Link TL-WR841N which i have managed to setup up properly, i am able to connect to the wireless and get internet access. However the minute i walk out of the room or a few meters away i am disconnected and i can't re-connect, i get the "windows cannot connect to TP-LINK" message. The signal strength in on excellent and i know it works because when i stand near it, it works perfect.I phoned TP-LINK technical support who were pretty useless and couldn't fix the problem.

View 3 Replies View Related

Wifi Not Working With Tp-link Router?

Jul 20, 2012

im deployment and we have hardwire internet in my room. wanting to use all other devices eg. iphone and what not i bought a router to plug the hardwire in to and run the wifi off the router for all devices. its made by TP-LINK the model is TL-WR940N. it worked great for a while but then kept giving me DNS server is not responding but i could plug the hard cable in my computer and the internet would work fine? so i reset the router and set it all up again like before. Now i cant get it to run wifi off it anymore it recognizes and connect through wifi but no internet and its telling me i need to plud the hardwire in to my internet but my computer is recognizing it and saying i have internet access, but no internet i mean its not even thinking if there is internet.

View 1 Replies View Related

D-link Dir-655 :: How To Know If Wifi Antenna Is Not Working

May 7, 2011

I have a Dir 655 router how can I know if one of the antennas is working right? 

View 5 Replies View Related

D-Link DIR-655 :: ITunes Remote App Not Working?

Feb 5, 2011

It worked fine with my last router. It just doesn't seem to connect securely. It comes up under my iTunes, but once I go to enter the code, it doesn't show up as completed. Also, a utorrent monitoring app cannot connect to my computer, which is set up right at my computers end, but won't connect at all from my phone over wi-fi.

View 14 Replies View Related

D-Link DIR-615 :: DNS Not Working With 313NA Installed?

Feb 7, 2011

To fix a bunch of other problems I've installed the 313NA firmware on my rev. C2 DIR-615

I can connect to my ISP and DHCP just fine, and I get DNS servers back just fine, but the DIR 615 doesn't serve DNS correctly for the devices on the LAN. If I set the LAN machines' DNS manually to the IP addresses provided by my ISP they can look up hosts just fine. With them pointing at the DIR 615 for DNS they get nothing.

When I attempt to perform a name lookup using the admin System Check -> Ping Test I get "Unknown Host". The same name lookup up by any other LAN machine using the same DNS hosts gets the correct result. I've made sure there's no caching.

View 14 Replies View Related

D-Link DIR-600 :: DSL-320t Modem Not Working

Mar 25, 2012

I need configuring the dsl-320t modem connected to the dir-600 router. Already tried some configuration, with dhcp enabled and disabled, tried to assign a static ip to the router and tried to put the modem in bridge mode, but fail miserably .Now I've resetted both devices, if I connect with the ethernet cable my pc and one of the four lan connectors on the router, and then use another ethernet cable to connect the modem port with one of the other three free router port, I can connect to internet. Any other configuration i tried has not worked.

View 9 Replies View Related

D-Link DIR-655 :: Wireless Stops Working?

Mar 22, 2012

Once every couple of days the wireless service seems to disappear.  I've connected to the router from a wired computer and everything looks ok from the d-link panel, however its not showing up as an available wireless network on the wireless units. Pulling the power off for 30 seconds tends to get it working again.  I'm configured bg and n.  I need a mix... an old B laptop, have one machine that has a G NIC, and the rest are N.

View 14 Replies View Related

D-Link DIR-601 :: Other Router Quit Working With DCM-202

Aug 1, 2011

Setup that was working. DCM-202 to  AT&T Micro Cell to DIR-601 wi-fi.Now I can direct connect MacBookPro to DCM-202 and get internet. If I connect to DIR-601, either via ethernet or wi-fi, no internet. If I try another router, Apple Time Capsule, I get same result. If I just do an ethernet pass thru using the AT&T Micro Cell, still no internet. Basically, the DCM-202 will direct connect via ethernet to my laptop, but not pass thru an ethernet connection for any other devices.

View 1 Replies View Related

D-Link DIR-655 :: Wireless Has Stopped Working

Oct 26, 2012

My DIR-655 wireless has stopped working after a few years of flawless operation. It still works for wired operation. I was running Firmware 1.21, tried rebooting, resetting to factory, powered off the unit, etc. without success. Decided to Upgrade to the firmware to 135 NA, still no success. I am in British Columbia on Shaw Cable.  On the Status Page under Wireless LAN, the Wireless Radio shows "Init failed".

View 3 Replies View Related

D-Link DIR-825 :: IPv6 Not Working When Using It As Switch And AP?

May 10, 2010

I am using my DIR-825 as a switch and AP. I have turned off DHCP and plugged the internet into the lan-1 port. This works perfectly for IPv4, but I cannot get IPv6 to work. On the outside there is native IPv6 running radvd. How should I configure IPv6 on my DIR-825?

View 2 Replies View Related

D-Link DIR-601 :: Not Working On Quake 3 Or VOIP?

Jan 3, 2010

I just bought the Dir-601 router and so far it is fast and stable. However, I haven't been able to get it to work on Quake 3 (no connection to the Master server) or VOIP using the Linkysys Pap2 voip adapter.  I tried setting it up using the predefined port forwarding rules to no avails. I tried port forwarding certain ports and even using DMZ but also without success.  For some reasons, the router is preventing my computer to connect to any online server.

View 4 Replies View Related

D-Link DIR-655 :: Web Access Control Not Working?

Mar 2, 2010

I may be doing it incorrectly, but I'm trying to configure web access rules.  I first set up access control and tell it to use the website filter.  I've tried configuring it by both MAC address and IP address (separately, not simultaneously), but it still allows the listed sites in the web filter to get through.  Is there something else I need to block or am I not doing something correctly?  The network is on DHCP reservation, so IP addresses are always the same.  MAC addresses, as I mentioned, don't work, either and they are fixed and logged in the router.

View 9 Replies View Related

D-Link DIR-825 :: OpenDNS Settings Not Working?

Aug 29, 2011

I'm trying to set up opendns on my DIR-825, firmware v2.05. Under the Setup/Network Settings I set the primary and secondary DNS Server IPs to the ones from [URL] and save the settings and they don't stick.I have also unchecked the "Enable DNS Relay". Well, tried it on and off and neither pad a difference.

View 3 Replies View Related

D-Link DIR-655 :: Stopped Working For Some Games?

Dec 6, 2011

I've had the dir655 for about a year now, and no problems at all, until about a week ago. I went into a couple of online games (Bad Company 2 and World of Tanks) and would have a low ping showing in the game, but every 10-15 seconds, especially in areas with a lot of action, I would get large amounts of lag, making the games unplayable.I would be unable to move or keep getting 'teleported' back 20 feet. I looked into it maybe being the servers, steam in the case of bad company, or my internet provider, but regular internet actions are not affected at all. After searching for a while tweaking settings, turning off antivirus and firewalls, it made no difference.I finally today plugged my modem directly into my pc instead of leaving it on wireless, and all the problems go away. All packet tests and connection tests to my router have come back with no errors. Again, I have never had a problem just browsing the web or watching videos, and usually get more speed on speedtest.net than my provider even advertises. I also upgraded the router firmware.I tried going into my router settings and doing all I could (as I understand it) to have exceptions, port forward, and even did the one thing (can't remember what it's called) where you add one ip address that will have no limitations put on it by the router, and none of this has made it work.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved