Have A D-Link DIR-615 Router And Can't Get The Internet Working?
Feb 19, 2013
I have a D-Link DIR-615 router and can't get the internet working and have done everything possible to get it working. the globe light which is the internet light will not turn from amber to green. I have done a factory reset which is why this occurred in the first place. After the reset the globe stayed orange and the internet refused to work now everything is up but the wireless will not work nor the internet I have gone through both the manual set up and set up wizard and tried all options.
View 8 Replies
ADVERTISEMENT
Apr 6, 2012
My D-Link Pocket Router Work like 2 Weeks. and then could not connect to my internet. i am using for connecting my computer to the internet. but i had all the correct info in. it try's to connect. yet does not connect. the AP Mode works. CL (Client)
View 7 Replies
View Related
Nov 13, 2012
I bought the DIR-655 last year and till within warranty. Yesterday, I lost the wireless network on my laptops but internet was working. I contacted the d-link support and during the process of troubleshooting the problem, the internet connection was also lost. I followed all instructions given to me by d-link teams that spoke with me but the problem was not resolved. I tried to call the d-link support but my calls were ignored . Up till now, the wireless and internet connections through DIR-655 are not working.
View 5 Replies
View Related
Mar 10, 2012
I bought this router and ever since my internet connection will drop out for 5 minutes at a time then come back in. This happens on both wifi and the wired connection. The weird part about it is that if there is a program that maintains a constant connection, e.g. xbox live or an online MMO, they don't lose connection when every other device or even tabs within the same browser all lose connection.
BTW It's the REV_B with the 2.07 firmware.
View 2 Replies
View Related
May 8, 2012
If set the LAN to 1000 duplex I get better throughput than If I set it to Auto 100/1000,but the problem is that then my internet modem stops working,is there a solution to this ?
View 11 Replies
View Related
Sep 27, 2012
i have a d-link wireless router model DIR-601 and all the lights keep turning on and off besides the power
View 1 Replies
View Related
Nov 11, 2011
I have been using a d-link router for some time now and since yesterday it has stopped working ( I have an orange 'world' light on all the time) After looking around this site I have tried resetting etc and nothing works. If I plug the ethernet cable into the modem I can get on the internet if I plug the cable into the router then nothing. These are the details I got from the config all when I plugged the ethernet into the router.
View 3 Replies
View Related
Jul 10, 2011
My router suddenly stopped working yesterday and I've tried everything I can think of to fix it. I have one computer wired directly in to it and a few laptops that use wireless connections.The power LED and the internet LED light up, but the status LED and the WLAN LED do nothing. Pushing the factory reset button on the back doesn't seem to do anything.Can't connect to the router site (192.168.0.1) The internet works fine when I plug in to it directly, so its definitely the router.
View 3 Replies
View Related
Jul 20, 2012
im deployment and we have hardwire internet in my room. wanting to use all other devices eg. iphone and what not i bought a router to plug the hardwire in to and run the wifi off the router for all devices. its made by TP-LINK the model is TL-WR940N. it worked great for a while but then kept giving me DNS server is not responding but i could plug the hard cable in my computer and the internet would work fine? so i reset the router and set it all up again like before. Now i cant get it to run wifi off it anymore it recognizes and connect through wifi but no internet and its telling me i need to plud the hardwire in to my internet but my computer is recognizing it and saying i have internet access, but no internet i mean its not even thinking if there is internet.
View 1 Replies
View Related
Aug 1, 2011
Setup that was working. DCM-202 to AT&T Micro Cell to DIR-601 wi-fi.Now I can direct connect MacBookPro to DCM-202 and get internet. If I connect to DIR-601, either via ethernet or wi-fi, no internet. If I try another router, Apple Time Capsule, I get same result. If I just do an ethernet pass thru using the AT&T Micro Cell, still no internet. Basically, the DCM-202 will direct connect via ethernet to my laptop, but not pass thru an ethernet connection for any other devices.
View 1 Replies
View Related
Jan 22, 2012
I have a Dlink DIR-615 wireless router that up until a few days ago was working perfectly. Then I had to turn it off at the wall before a storm and it has stopped working. I have tried resetting it with no luck. I am able to get internet try to get onto on my desktop without the router.I have tried to connect to 192.168.0.1 it won't let me. I can't get on there with an internet connection either. As soon as I connect the router the default gateway disappears. [code]
View 5 Replies
View Related
Jun 11, 2011
I have a iMac with 2 AppleTVs all connected to a D-Link DIR-655. I used to run iTunes on Windows 7 and everything worked fine (before I got the iMac). Here's the problem - since moving over to the Mac, when the AppleTVs are wire connected to the network, the iTunes library on the iMac will not show up in the AppleTVs. The AppleTVs work fine otherwise (they can both connect to the Internet with no problem). I also cannot see the iMac's iTunes library or the AppleTVs in the iPad's remote app. When I then disconnect the ethernet wire from the AppleTVs (so they hook up wirelessly to the DIR-655), it works fine (iTunes library on the AppleTVs, and everything is showing up in the iPad remote application). After the wireless connection is established, if I plug the ethernet wire back into the AppleTVs (to take them off wireless and force them back onto the network wired), it works fine as well, until I reboot the iMac, then back to square one with the same problem.
As mentioned, it works fine with the Windows 7 PC, but if the iMac is turned on on the same network router, same problem with the Windows 7 PC (library will not show up in the AppleTVs). As soon as I turn off the iMac, the Windows 7 iTunes libraries show up in the AppleTVs (no need to wirelessly connect). There's clearly some conflict being created with the iMac with the DIR-655 that's causing this. I've tried enabling Multicasting and port forwarding TCP 3689, and this didn't fix it either.
View 1 Replies
View Related
Jul 21, 2011
I bought the DIR-655 less than a year ago in Amazon, shipping it to NY. And then I came back to Uruguay. Almost 3 months ago the router stopped working completely and I started to search for support in Uruguay.After calling US support I was told I should contact the local or regional D-Link (which I later found is D-Link LA). And via DLinkLA.com I found the company TELEDATA S.A. url... who does the official support for D-Link in Uruguay. They told me the router couldn't be fixed, and told me DLinkLA, which is based in Chile, would either send me a working one (they also told me the service/warrany was already approved), or send me the money and gave me their contact details.After two weeks of contacting them, trying to get their attention, they finally told me it was not their responsibility because it was bought in the US. And now they don't return my e-mails.
View 5 Replies
View Related
Jul 20, 2011
My DIR-655 wireless router randomly quit working. It was plugged into my modem and working great, then it just stopped. I restarted my modem and router, but the "Ethernet" light on my modem does NOT shine when plugged into the router.
I'm sure that the modem is fine, as I have it connected to my PC right now. I also tried it with my friend's wireless router - works fine.
I believe this may be hardware-related. I have tried restoring the router to factory settings and then setting up everything again: No luck.
I haven't had this router for long! Just a little over two years I believe (or it may be just a little over one). I have another wireless router somewhere that's 6-7 years old and still works. If it is hardware related (as in the router just randomly broke), then rest assured I will not be purchasing another D-Link router in the future.
View 1 Replies
View Related
Apr 26, 2013
Region : Israel
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 3.13.31 Build 130128 Rel.56595n (Beta)
ISP : Israel . Cellcom 3g
When I plug the USB Modem to the router its show
Unknown USB Modem
this is the 3 usb modem I tried after I had bought the TL MR3420
View 1 Replies
View Related
Dec 6, 2011
I have a Dlink Dir-615 router and a Motorola SB6120 Modem. For some reason the router suddenly says it's receiving internet access from the modem. It has worked for several months beforehand. I tried another Dlink modem and got the same results. I have my computer hooked directly to the modem hence the ability to make this post.
View 5 Replies
View Related
Feb 19, 2011
My D-Link DIR-655 will no longer let me pull up any web pages after several hours. For example, it works great when first rebooted, but the next morning web pages have timed out. When it is broken, I'm unable to connect to web pages via another wireless access point that i've plugged into the D-Link. I'm unable to use any of the wireless PCs or devices in my house.After it's rebooted, it works well for at least a few hours. It has the latest firmware and has basic, out of the box settings.
View 14 Replies
View Related
Mar 8, 2013
Region : India
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 3.13.27 Build 121206 Rel.60215n
ISP : Vodafone India
I have just bought a MR3420 and although it works fine on WAN, it does not work with the Micromax mmx325G 3G usb dongle. How to get this working?
View 2 Replies
View Related
Apr 22, 2013
Region : Others
Model : TL-MR3420
Hardware Version : V2
Firmware Version :
ISP : YU KENYA
most service providers in our country dont have 3G or 4G support,but all the same i bought an MR3420 router in the hopes that since my modem is listed,it would still connect even if on an EDGE/2G network like YU-Kenya.But this is not the case,the router does not recognize the modem i.e it says the modem is unplugged but when i look at the logs,it indicated it detected the modem but LTE was set to zero. providing a modem bin file for compatibility under EDGE/2G connection otherwise my router will be of no use to me.
View 2 Replies
View Related
Nov 30, 2012
None of the port forwarding settings are working at all on my router. I have just a couple very simple settings. One of them is just an IP camera. I input the name, the TCP port, the computer (IP address) and that's it. This works just fine with my other Netgear router, but with this router, NADA. The router has the latest version of the firmware applied. Just applied it. Hardware version B. Firmware version: 2.10NA. If so, then I really need my money back since it is a main function of a router and it should work. Can't return it now, since I bought it several months ago. Never knew port forwarding didn't work because I never needed it until now.
View 6 Replies
View Related
Feb 27, 2013
WRT54GX4 Wireless link not working
View 2 Replies
View Related
Apr 21, 2013
Region : India
Model : TL-MR3420
Hardware Version : V2
Firmware Version : Problem persists on all three firmware
ISP : BSNL india on EVDO
Today i purchased brand new Tp-Link MR-3420 3G/4G router for my BSNL EVDO modem..as this product is shown to support ZTE AC8700 modem...but it doesnt seem to work.. I put the right dial-up number,user name and password that i use when i connect modem to laptop and left APN field blank...The modem gets identified by the router but it just don't connect to internet,it just keeps saying "connecting.....". Also the signal strength is shown 0%... If your modem is really supporting ZTE AC8700 modem why its not working?
View 2 Replies
View Related
Nov 4, 2012
Region : India
Model : TL-MR3220
Hardware Version : Not Clear
Firmware Version : 3.14.2 Build 120822 Rel.57775n
ISP : BSNL EVDO
I have one BSNL EVDO data card which was working fine before firmware upgrade to latest 3.14.2 Build 120822 Rel.57775n. Now it is keep on saying device unplugged after identifying the device. The device is working fine while connected on my laptop.
View 14 Replies
View Related
Apr 26, 2013
Region : Others
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.14.4-121225-40357n
ISP : PTCL
I have just bought TL-MR3220 router to use with Huawei EC315-2 USB 3G modem, but it is not being identified by the router. I checked compatibility list and it is not in 3G modem compatibility list. I tried to find out its bin file so that I can add modem configuration to the router but unfortunately could not find any.
View 2 Replies
View Related
Mar 5, 2013
Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.14.2 Build 120822 Rel.57775n
ISP : BSNL EVDO
my BSNL evdo ZTE AC8700 modem is not working with TL-MR3220 V2. The modem is being detected in the router and i have set the Dialing number, username, password. [code]
View 5 Replies
View Related
Jan 28, 2010
Region : India
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 3.13.27 Build 121206 Rel.60215n
ISP : Vodafone India
I have just bought a MR3420 and although it works fine on WAN, it does not work with the Micromax mmx325G 3G usb dongle.
View 9 Replies
View Related
Dec 30, 2012
Region : Poland
Model : TL-MR3220
Hardware Version : V1
Firmware Version :
ISP : Bite
Router TL-MR3220 works well on 3G network, but is not works 2G (edge) network. 3G network is not suported in my location, only 2G. My modem is Huawei E 173. In location 2G network Router show: 3G/4G USB Modem: Unplugged.
View 3 Replies
View Related
Dec 19, 2012
Region : India
Model : TL-MR3220
Hardware Version : Not Clear
Firmware Version : TL-MR3220_v_2_120822
ISP : MTS
My Hardware version is v2.Just now I bought this router. When I am trying to configure it with default firmware is not identifying the modem itself. So Afyter facing this problem, I updated my Router firmware(TL-MR3220_v_2_120822) and retry the process. But this time, It identified the modem for few seconds, then its changes its trying to connecting, after that its change it state to unplugged. It is doing these steps repeatably. Identifying >> Identified >> (connecting) >> Unplugged. [code]
View 12 Replies
View Related
May 9, 2013
Region : Argentina
Model : TL-MR3040
Hardware Version : V2
Firmware Version : 2
ISP : Vodafone
I received the device today from Amazon UK. The device fails to connect with my Vodafone Huawei K3770. I have tried various things including selecting PAYG and Contract, tried manual settings. Also in Modem Settings there were no modems, hence installed a version of the K3770 for TP-MR3020.
Though the device is expected to work with K3770 (as stated on various sites) there seems to be no modem bin file provided on the TP Link site.
View 1 Replies
View Related
Jan 10, 2013
Region : Portugal
Model : TL-MR3220
Hardware Version : V2
Firmware Version : TL-MR3220_V2_121126_UK
ISP : OPTIMUS (26803)
I buy a Router TL-MR3220 and Forwarding e Dynamic DNS not work. I installed the latest firmware version (TL-MR3220_V2_121126_UK) and does not work well.
View 6 Replies
View Related
Nov 19, 2012
Region : Argentina
Model : TL-MR3220
Hardware Version : V1
Firmware Version :
ISP :
Region : Sweden
Model : TL-MR3420
Hardware Version : V1
Firmware Version : 3.12.21 Build 120523 Rel.37880n
ISP : www.ownit.se
I recently got a new email provider with a webmail. But I can not access the email from my home network. I have tried both my computers so I suspect that it can have something to do with my router. I have also set up the new email account in Outlook and in other networks it works fine, also the webaccess works fine in other networks. It seems that the problem is only related to my home network.i have talked to my ISP provider and they say that all is opened in there network. i have tried to clone the MAC address and that did not solve my problem. I also read the one could change the MTU size from default 1500 to 1440, that did not work either.
View 2 Replies
View Related
Mar 29, 2013
Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version : TL-MR3220_v2_120822
ISP : MTS and BSNL
Both modems (ZTE AC2746 and Prithvi UE100) are on the compatible list. Though they updated the compatible list with 'Prithvi UE100 (ISP: BSNL)' to be compatible with only v1 for unknown reasons, which led me to buy ZTE AC2746 (ISP: MTS) and now, it's not working either .Prithvi UE100: The modem connects to the internet but after about 3 minutes it disconnects. "Disconnect > Unplugged >Identifying> Identified >Connecting> Connected > Disconnected" and it keeps repeating.ZTE AC2746: The modem gets identified but after showing 'Connecting' it shows 'Unplugged' without even connecting to internet. This modem is on TP-MR3220 v2 compatible list.
View 1 Replies
View Related
May 13, 2013
Region : Germany
Model : TL-MR3020
Hardware Version : V1
when visiting Switzerland and Italy with my German SIM card I noticed that roaming is not working very good with the TL-MR3020. The reason is that the internet provider needs to be set in the config, in my case to o2 Germany.When I travel with this SIM card to another country, I roam into other networks.As I cannot what provider is currently active (as o2 has contracts with almost every provider outside Germany) and even if I could see it I have to adjust the settings in the config if anything changes, the satisfaction effect on this trip was not very good.
Also I noticed that sometimes (only sometimes) the setting resetted itself to o2 Germany when unplugging the device, this added some extra negative satisfaction to everything.In my understanding the router should have an auto detection for the currently active network and auto setup for the dialin parameters and everything else. Like every smartphone on the planet. Maybe you can also add a setting where you can enable or disable data roaming to save people money if they do not have a international data option booked.
View 2 Replies
View Related
