TP-Link 3G/3.75G Router :: New Email Account Not Working Through TL-MR3420?
Nov 19, 2012
Region : Argentina
Model : TL-MR3220
Hardware Version : V1
Firmware Version :
ISP :
Region : Sweden
Model : TL-MR3420
Hardware Version : V1
Firmware Version : 3.12.21 Build 120523 Rel.37880n
ISP : www.ownit.se
I recently got a new email provider with a webmail. But I can not access the email from my home network. I have tried both my computers so I suspect that it can have something to do with my router. I have also set up the new email account in Outlook and in other networks it works fine, also the webaccess works fine in other networks. It seems that the problem is only related to my home network.i have talked to my ISP provider and they say that all is opened in there network. i have tried to clone the MAC address and that did not solve my problem. I also read the one could change the MTU size from default 1500 to 1440, that did not work either.
Region : India Model : TL-MR3420 Hardware Version : V2 Firmware Version : Problem persists on all three firmware ISP : BSNL india on EVDO
Today i purchased brand new Tp-Link MR-3420 3G/4G router for my BSNL EVDO modem..as this product is shown to support ZTE AC8700 modem...but it doesnt seem to work.. I put the right dial-up number,user name and password that i use when i connect modem to laptop and left APN field blank...The modem gets identified by the router but it just don't connect to internet,it just keeps saying "connecting.....". Also the signal strength is shown 0%... If your modem is really supporting ZTE AC8700 modem why its not working?
Any way to get the DIR-655 to e-mail logs? I have all the e-mail settings set properly, but when I request the logs to be e-mailed, I never get anything. Its not in a spam folder either.I do have the DIR-655 behind a 2wire router/DSL modem. I don't know if this is the problem, but I can send and receive e-mails from my computer which is connected to the DIR-655, so I don't think that is the problem.
Someone tricked me by sending false email and gained control of my email address. I tried to log on and change my password but I cannot. How can I regain control. I am not experienced with computers. I would also like to learn more about computer basics to start.
I have a HOTMAIL email account and I have not been able to log on to my account for several weeks. The screen stays blank and nothing comes up. How do I log on?
My company have an email address info@... which we currently have forwarded to a hotmail account and we work out of hotmail. We'd like to step it up a gear and be able to share the email account in Mircosoft Outlook (not Hotmail) across 2 different shops across London so both shops have access to the email address in Outlook. We would ideally like to know when an email has been replied to or deleted .etc. across both shops. We have a website, and web server with our hosting.
Region : Australia Model : TL-MR3420 Hardware Version : V1 Firmware Version : TL-MR3420_V1_121123 ISP : BIGPOND
My problem is whenever I upload anything, my modem disconnects. My USB Dongle is a Telstra Ultimate 3G Sierra Wireless AirCard 312U. The problem is not present whenever I connect the dongle directly into the USB port on my LapTop.
Region : Others Model : TL-MR3420 Hardware Version : V2 Firmware Version : 3.13.27 Build 120905 Rel.73281n
I have successfully connected to my ISP with the 3G USB dongle.But it seems like the PIN code is not saved. I have to enter it after a reboot of the router.
Region : Sweden Model : TL-MR3420 Hardware Version : V1 Firmware Version : 3.13.1 Build 121123 Rel.57630n ISP : Telenor
I have TP-LINK 3G/3.75G Wireless N Router Model # TL-MR3420 which is compatible with Telenor 3G USB ZTE MF190. With quick setup I have successfully configured the router, but the router does not connect with 3G ZTE MF190. I even called the Telenor helpline, they say that, they've no support for TP-LINK.
Region : New Zealand Model : TL-MR3420 Hardware Version : V2 Firmware Version : ISP : Telecom New Zealand
getting the MR3420 but will be using a ZTE 669 Turbo stick as the modem ISP Telecom New Zealand.I did notice that they seem to be supporting the ZTE 668+ which I'm guessing is a vary similar model.
Region : India Model : TL-MR3420 Hardware Version : V2 Firmware Version : 3.13.27 Build 121206 Rel.60215n ISP : Airtel India
i Want To Add External Battery In My TL-MR3420 .. Is It Possible . Any One Try It Or Not . I Have Always Power Problem In My Home That's Why i Need Battery For My TL-MR3420... Any One Guide Me .. Any Hardware Diagram For It .. i'm Android Dev And hardware Eng .. If U Provide Me Hardware Diagram Or Any Other Info i Will Add External Battery In It ...
Region : Sweden Model : TL-MR3420 Hardware Version : V2 Firmware Version : ISP :
I'm trying to replace my old router with the TL-MR3420 but I cannot reach Internet.
I get "Internet" directly by a Cable into my apartment. This Cable is connected to the WAN input. Then I connect my computer to one of the LAN ports. (The Cable Connections are done exactly as on my previous router.)
The setup on my PC (running Windows 8) is as described in the manual (IP address automatic and DNS server automatic).
Internet doesn't work and I cannot reach the router from the browser using 192.168.1.1.
I'm not using any 3G and of course I have restarted the router (and PC) a couple of times. I thought I could just replace my old router with the new one... but NOT.
Region : Australia Model : TL-MR3420 Hardware Version : Not Clear Firmware Version : ISP : Telstra
Is remote administration over 3G connection possible? The telstra public IP is not pingable. (from externally) Goes no where when I put the public IP into a browser. (from externally) Any settings changes to enable this?
Region : Malaysia Model : TL-MR3420 Hardware Version : V1 Firmware Version : 3.12.21 Build 120523 Rel.37880n
Just wonder if anyone using the same model of router and having bad connection with wireless? Its OK with the pc LAN (physical cable) connection but intermittent lost signal, request timeout when connect from notebook or iphone/ipad via wireless whether with DHCP or fixed internal IP.
I am having this issue since day 1, then upgrade the firmware by myself... Still no good. I keep the device into store send to warranty claim. After 2-3 months only get back the device, firmware being updated to above.. It seems to be OK for 1st week( i think) ... but now lost signal again.
Region : Egypt Model : TL-MR3420 Hardware Version : V1 Firmware Version : TL-MR3420_V1_120523 ISP : Etisalat Egypt
TL-MR3420 failed to detect " ZTE MF190S " Egypt Etisalat USB Dongle, and the file for the attached model can't be found on the 3G Modem Bin File Center.
Region : Ireland Model : TL-MR3420 Hardware Version : V1 Firmware Version : V1-121123 ISP : 3 Ireland
my Huawei E353 dongle/modem is not recognised by the MR3420 router. The router functions perfectly with a different dongle (E122). The E353 works fine when connected directly to laptop so I am happy it is functioning fine. Could not find a bin file for the E353.
Region : Others Model : TL-MR3420 Hardware Version : V2 Firmware Version : openwrt-mr3420-v2-HM2013-04-19 ISP : Cellcom Israel
how to make hard reset to MR3420.I installed openwrt-mr3420-v2-HM2013-04-19 software to my router.and after that while the router restart the led green lights flashing on and of all the time.and I cant contact to the router with wifi or lan cable
Region : Malaysia Model : TL-MR3420 Hardware Version : V1 Firmware Version : TL-MR3420_V1_121123 ISP : Celcom
My HUAWEI E367 Can't Detect in TL-MR3420.I don't know what to do and I'm already downgrade the frimware but it still can't detect my broadband. Then, I upgrade the frimware and it still can't detect my broadband.
Region : Sweden Model : TL-MR3420 Hardware Version : V1 Firmware Version : TL-MR3420_V1_121123 ISP : Tre
I have owned the TL-MR3420 for about six months and never had any problems with it, 3G connection stable enough and wifi and LAN worked properly without any drops.About one week ago I started experiencing problems. Both wifi and LAN gets disabled and I need to pull the plug and do a hard reset to correct the issue. This only happens after some heavy use, many devices is connected to Wifi, streaming files over the WIfi and so on. A scenario may be the following; there are six devices back home using all using wifi. All of them are not connected at the same time, but four may be; usually three computers and one tablet. The HTPC may do some heavy videostreaming from another computer. When the streaming is over, some devices are shut down then I may lose the WIFI and LAN ability of the router.
I have tried connecting with cable after wifi were lost but no IP address where given to it and connection where refused. This means I have no possibility to access the log file in the router, and after reboot the log file is reset. Router settings is pretty much default.Is my device broken or is there any setting I may tweak with?I have updated to latest firmware and tried to change channel without success.
Model : TL-MR3420 Hardware Version : V1 Firmware Version : 3.12.8 Build 110418 Rel.43954n ISP : SBB - Serbia Broadband[/COLOR]
I have been usung TP link for years, and now I want to use the 3G modem option the 3420 offers. But in the list of countries I can't find Serbia, and I can't find the ZTE MF 195. I found that on the TP Links site list of compatible modems there is Other countries, but in the modem list there isn't such an option, and since there is also no ZTE MF 195, and there isn't a "Telenor" entry for the service provider.I tried telling the router that I'm from another country, and setting up some of the parameters manually, but "surprisingly" it didn't work. Is there or could someone make a program which makes BIN files specific to the modem that isn't on the list, or is there a place where the BIN files grow?
Region : Brazil Model : TL-MR3420 Hardware Version : V1 Firmware Version : TL-MR3420_V1_120523 ISP : TIM
The TL-MR3420 recognizes my modem (Olivetti Olicard 160), but it does not connect to the 3G network. I tested the modem on my PC and it connects fine. The PIN verification is deactivated and the Modem configuration is the same as I use on the PC, however it just keeps trying to connect without success. I updated the firmware to the latest version.
