D-Link Pocket Router First Working But Now Could Not Connect To Internet?
Apr 6, 2012
My D-Link Pocket Router Work like 2 Weeks. and then could not connect to my internet. i am using for connecting my computer to the internet. but i had all the correct info in. it try's to connect. yet does not connect. the AP Mode works. CL (Client)
I have purchased a Dlink DWR 131 today. I did configure it as per the instructions. Initially my iPhone was able to detect the wireless network. Then I switched off the device and turned it on later and it stopped working. It is not damaged for sure, since http://192.168.0.1/ is still accessible from my laptop and I am able to connect to internet through LAN cable. But the wireless network is not working. Even my laptop doesn't detect the network neither does my iPhone. I suspect this to be some configuration issue. I have tried using different SSIDs. Also, MAC filter is disabled. I also tried using different wireless channels. I even did reset the router but no luck.
Just got myself a used but fully working MiTAC Mio 558 Digi-Walker POCKET PC.[UNow on the Pocket pc ive gone into Network settings, and its found my wireless signal,along with others in the street...but when i click on mine and put in my password key it just says "The Network Key you have entered is not correct,Please try again".I can assure you guys i am putting in the right network key/password for my router,i also have a laptop connected to my router and thats working and accepting the key but not my Pocket pc.My router is a Netgear wnr2000.
I have a D-Link DIR-615 router and can't get the internet working and have done everything possible to get it working. the globe light which is the internet light will not turn from amber to green. I have done a factory reset which is why this occurred in the first place. After the reset the globe stayed orange and the internet refused to work now everything is up but the wireless will not work nor the internet I have gone through both the manual set up and set up wizard and tried all options.
My wireless internet isn't working. The light is lit up on the router and it even says i have a full three bars on my ipod that im using it with, yet when i try to go on the internet on my ipod it says that im not connected to the internet.I looked on the internet and most websites said to type 192.168.1.1 into your address bar and change some stuff around. The only problem is that when i did this it didn't work and nothing loaded up.
Sometimes my wifi signal will randomly drop and I cannot browse the Internet. The network still appears on my computer and I can connect to it, however Internet pages will not load. This lasts for hours, sometimes days. If I unplug the modem from the router and connect directly to the modem via Ethernet, everything works fine! I have tried unplugging everything for 1 minute then plugging it back in and it does nothing.
I have a D-link DIR-655 router which used to be able to connect to the internet fine through my modem. However, it wasn't connecting to the internet when I woke up this morning. I tried all the standard replacing the cables, powercycling the router, modem, and rebooting the PC. After trying all that, I used the reset button on the router and reconfigured manually by entering the IP into my browser and logging in that way, but still nothing. I can connect to the internet by plugging the modem directly into my PC, but connecting through the router or wirelessly doesn't work. I can connect to the network itself through the router, and wireless from my laptop, but it only has local access.
Here's the ipconfig going through the router:
Quote:
C:UsersSolon Family>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : SolonFamily-PC
I bought a Dlink Dir-601, I was able to connect to the internet when we were with our last internet provider but after we switched companies it no longer connects to the internet. I've tried power cycling my system, updating the firmware, factory defaulting it, resetting it with the button on the back but no luck yet
My new DIR-601 router has been installed and configured but will not connect to the internet either wireless or through a wired connection. Have reset and re-installed, have rebooted router, modem and computer all with no change. Connection is DSL (AT&T) and works fine when connected to either desktop or laptop computer at home. AT&T says to contact manufacturer, D-LINK says to contact ISP. After nearly two months without our wireless (XBOX and Netflix) we are about ready to return this before return period is up and just go with Clear.
Im using a Tp-link wireless router and I have a modem attached to my pc. I just noticed that if I turn off my router, the Ethernet light on my modem turns off, but the power and dsl lights are still on. Is there a way for me to use my pc even if my router is turned off? If I remember right, i've tried it before and it worked... But now, I have to turn on my router just for me to be able to connect to the net on my pc.
I recently purchased a new Dlink DIR-655 router. My motivation was a router with a USB port. I initially purchased a DIR-632. I have 1 desktop without a wireless card so it connects to router thru ethernet cable. I have 2 personal laptops with wireless cards and 1 work computer also with wireless card. With the DIR-632 all computers would connect to router, but my work computer (Dell) would connect but then intermittenly show no internet connection. All other computers had no issues connecting to internet ( wired and wireless) The Dell would connect and have internet connection if I used a wired connection. After talking to DLink Tech support they said that i had an issue with the Dell. I called Dell and they walked me thru several things. Nothing worked. They ultimately sent in a tech who replaced wireless adapter and did a diagnosis before leaving and the Dell was deemed to be in perfect working order. I tried connecting again after Dell's repairs and same issue. DlinK Tech support then said the issue was with router and suggested replacing router. Went back to place of purchase and obtained the DIR-655. Got home and exactly the same issue. Again on the horn with Tech support and issue was determined to be bad router. Went back to place of purchase and got another DIR-655. Got home tried new router same issue. Spent in excess of 4 hrs on the phone with level 3 tech support. We tried many, many possible fixes and it appeared as if we had the problem fixed, but within a hour of hanging up with tech support the issue was unchanged.
As the Dell is a work computer I use it a multiple locations, some with no issues connecting wirelessly and one location the same issue as at my home (interestingly enough this location uses a DIR-655). At this 1 work location it says I'm connected, it says there is internet access, but I cannot do anything on the internet.(I can connect without issue with an ethernet connection) At my home location I can connect to the DIR-655 wirelessly, it initially shows internet access and I might be able to access a single webpage, but then it states no internet connection, but it is still connected to the DIR-655.
My initial DIR-615 and the Dell works perfectly fine. However that defeats the purpose of me buying the DIR-655. Ideally I want only the DIR-655 with all computers connecting thru it.
The ISP is a satellite connection. The modem is a Hughes HN9000. By spending 4 hours online with tech support we have changed the channel used, specified specific DNS locations, IP addresses, renewed DHCP, you name we have probably tried it.
The Dell for some reason just does not like the DIR-655, as it connects to the DIR-615 and 1 other work location router, but it will not connect at my home or other work locations (both DIR-655 routers).
I just bought DIR-655 yesterday and tried to set it up through the CD but without success. My problem at first was I couldn't get internet connect via router (but PC to DSL modem direct connection is always all right). Then I played around to turn on "Advanced DNS service" then I got internet connection via router to my PC. However sometimes the web site names couldn't be translated by DNS correctly and it resulted in "Not Found" and I am pretty sure those web sites are active and running (as I have no problem to access those if I connect DSL modem to my PC directly). Also I noticed wireless connection was very slow and some You Tube videos would stop playing after around 30 seconds and DSL modem had no further activity at all. Why couldn't I use 192.168.0.1 (default IP) as primary DNS (as I got no internet at all if I did so)? Is it really necessary to turn on "Advanced DNS service"? How can I get internet access if I turn "Advanced DNS service" off?
Region : Sweden Model : TL-MR3420 Hardware Version : V2 Firmware Version : ISP :
I'm trying to replace my old router with the TL-MR3420 but I cannot reach Internet.
I get "Internet" directly by a Cable into my apartment. This Cable is connected to the WAN input. Then I connect my computer to one of the LAN ports. (The Cable Connections are done exactly as on my previous router.)
The setup on my PC (running Windows 8) is as described in the manual (IP address automatic and DNS server automatic).
Internet doesn't work and I cannot reach the router from the browser using 192.168.1.1.
I'm not using any 3G and of course I have restarted the router (and PC) a couple of times. I thought I could just replace my old router with the new one... but NOT.
I have a d-link n150 model (wireless router) that i cannot get to pick up the signal of an 3G mobile broadband optus prepaid stick when pluged in. I have reset the router settings multiple times and nothing. Nether had a router before this one .How do i fix this problame and is it possible that the problame is in the settings of the internet stick?
I migrated my internet from PPPOE to DHCP. My wifi is working with no problem but when I hook up my computer to 1 of the 4 Lan ports I can't seem to connect to the internet I can however log in my router no problem. But I don't get internet access... I wonder what could be the problem. I tried resetting my router and modem to see if just a bug or something but to no avail.
I have a modem router (TP-Link TD-W8961ND) connected to the internet and working fine. It is broadcasting a wireless network and that too works fine.
I have a second modem router (Siemens SL2-141) functioning as an extender. It is wired to the first router and broadcasting a wireless network with the same SSID, same security, but on a different channel. DHCP and UPnP are disabled on the second router. My i Pad, iPhone, and Win7-based Think Pad are all able to move between the two networks with no problems.
We also have a Win XP SP2 Net book. When in proximity to Router1, this machine accesses the LAN and Internet with no problems. As soon as it gets closer to Router2, it picks up the signal and shows an "Excellent"/"Strong" connection but it can no longer see the internet. It can see Router2's config page and the other machines on the network but it cannot get past the router to the internet.
Region : India Model : TD-W8968 Hardware Version : V1 Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n ISP : BSNL
I Bought thisTD-W8968 a month back.. It was working alright till a few days back. From the past 3days i'm experiencing internet light and DSL light going off...The DSL light is not constant even for 5min...When the DSL light comes up, the internet light takes almost 5min to comeup or before internet light come up the DSL light goes off.There wasn't problem with my old UT star modem..I already checked,its running fine without disconnection..When i replace it with TD-W8968 router ,the problem continues.. When my internet connection was good...The SNR margin was like 25 for upstream and 31 for downstream...After 2 days it went mad. here are the images shows about current reading..Fluctuates between 0.2 - 100 upstream and 2-35 for downstream
recently tried to connect a Samsung BD-EM57C blu-ray player to my wireless network. I have a D-Link WBR-1310. Have one desktop, Smart tv currently on network --no problems. Blu ray will find my network but cannot connect. "unable to connect enter ip address manually" which I did. Fail. "enter subnet mask" which I did. Fail. "Ip address taken enter different address" Now what?
I bought the DIR-655 last year and till within warranty. Yesterday, I lost the wireless network on my laptops but internet was working. I contacted the d-link support and during the process of troubleshooting the problem, the internet connection was also lost. I followed all instructions given to me by d-link teams that spoke with me but the problem was not resolved. I tried to call the d-link support but my calls were ignored . Up till now, the wireless and internet connections through DIR-655 are not working.
I bought this router and ever since my internet connection will drop out for 5 minutes at a time then come back in. This happens on both wifi and the wired connection. The weird part about it is that if there is a program that maintains a constant connection, e.g. xbox live or an online MMO, they don't lose connection when every other device or even tabs within the same browser all lose connection.
If set the LAN to 1000 duplex I get better throughput than If I set it to Auto 100/1000,but the problem is that then my internet modem stops working,is there a solution to this ?
I'm having an issue with my wifi connection. Since 3-4 hours i can't access internet, although my router configuration page says that adsl is ok. But then i noticed that the download of ubuntu through p2p client continued working. I've also tried with another pc and with two different wifi adapters, but unfortunately i can't try wired connection.
In my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1 IC : 4216A-IR601 H/W Ver:A1 F.W Ver:1.00 NA
I have been using a d-link router for some time now and since yesterday it has stopped working ( I have an orange 'world' light on all the time) After looking around this site I have tried resetting etc and nothing works. If I plug the ethernet cable into the modem I can get on the internet if I plug the cable into the router then nothing. These are the details I got from the config all when I plugged the ethernet into the router.
My router suddenly stopped working yesterday and I've tried everything I can think of to fix it. I have one computer wired directly in to it and a few laptops that use wireless connections.The power LED and the internet LED light up, but the status LED and the WLAN LED do nothing. Pushing the factory reset button on the back doesn't seem to do anything.Can't connect to the router site (192.168.0.1) The internet works fine when I plug in to it directly, so its definitely the router.
im deployment and we have hardwire internet in my room. wanting to use all other devices eg. iphone and what not i bought a router to plug the hardwire in to and run the wifi off the router for all devices. its made by TP-LINK the model is TL-WR940N. it worked great for a while but then kept giving me DNS server is not responding but i could plug the hard cable in my computer and the internet would work fine? so i reset the router and set it all up again like before. Now i cant get it to run wifi off it anymore it recognizes and connect through wifi but no internet and its telling me i need to plud the hardwire in to my internet but my computer is recognizing it and saying i have internet access, but no internet i mean its not even thinking if there is internet.
Setup that was working. DCM-202 to AT&T Micro Cell to DIR-601 wi-fi.Now I can direct connect MacBookPro to DCM-202 and get internet. If I connect to DIR-601, either via ethernet or wi-fi, no internet. If I try another router, Apple Time Capsule, I get same result. If I just do an ethernet pass thru using the AT&T Micro Cell, still no internet. Basically, the DCM-202 will direct connect via ethernet to my laptop, but not pass thru an ethernet connection for any other devices.
I have a Dlink DIR-615 wireless router that up until a few days ago was working perfectly. Then I had to turn it off at the wall before a storm and it has stopped working. I have tried resetting it with no luck. I am able to get internet try to get onto on my desktop without the router.I have tried to connect to 192.168.0.1 it won't let me. I can't get on there with an internet connection either. As soon as I connect the router the default gateway disappears. [code]
I have a iMac with 2 AppleTVs all connected to a D-Link DIR-655. I used to run iTunes on Windows 7 and everything worked fine (before I got the iMac). Here's the problem - since moving over to the Mac, when the AppleTVs are wire connected to the network, the iTunes library on the iMac will not show up in the AppleTVs. The AppleTVs work fine otherwise (they can both connect to the Internet with no problem). I also cannot see the iMac's iTunes library or the AppleTVs in the iPad's remote app. When I then disconnect the ethernet wire from the AppleTVs (so they hook up wirelessly to the DIR-655), it works fine (iTunes library on the AppleTVs, and everything is showing up in the iPad remote application). After the wireless connection is established, if I plug the ethernet wire back into the AppleTVs (to take them off wireless and force them back onto the network wired), it works fine as well, until I reboot the iMac, then back to square one with the same problem.
As mentioned, it works fine with the Windows 7 PC, but if the iMac is turned on on the same network router, same problem with the Windows 7 PC (library will not show up in the AppleTVs). As soon as I turn off the iMac, the Windows 7 iTunes libraries show up in the AppleTVs (no need to wirelessly connect). There's clearly some conflict being created with the iMac with the DIR-655 that's causing this. I've tried enabling Multicasting and port forwarding TCP 3689, and this didn't fix it either.
I bought the DIR-655 less than a year ago in Amazon, shipping it to NY. And then I came back to Uruguay. Almost 3 months ago the router stopped working completely and I started to search for support in Uruguay.After calling US support I was told I should contact the local or regional D-Link (which I later found is D-Link LA). And via DLinkLA.com I found the company TELEDATA S.A. url... who does the official support for D-Link in Uruguay. They told me the router couldn't be fixed, and told me DLinkLA, which is based in Chile, would either send me a working one (they also told me the service/warrany was already approved), or send me the money and gave me their contact details.After two weeks of contacting them, trying to get their attention, they finally told me it was not their responsibility because it was bought in the US. And now they don't return my e-mails.