Wireless Internet Not Working / Can't Connect To Router
Apr 23, 2011
My wireless internet isn't working. The light is lit up on the router and it even says i have a full three bars on my ipod that im using it with, yet when i try to go on the internet on my ipod it says that im not connected to the internet.I looked on the internet and most websites said to type 192.168.1.1 into your address bar and change some stuff around. The only problem is that when i did this it didn't work and nothing loaded up.
View 4 Replies
ADVERTISEMENT
Nov 25, 2012
Sometimes my wifi signal will randomly drop and I cannot browse the Internet. The network still appears on my computer and I can connect to it, however Internet pages will not load. This lasts for hours, sometimes days. If I unplug the modem from the router and connect directly to the modem via Ethernet, everything works fine! I have tried unplugging everything for 1 minute then plugging it back in and it does nothing.
View 2 Replies
View Related
Apr 6, 2012
My D-Link Pocket Router Work like 2 Weeks. and then could not connect to my internet. i am using for connecting my computer to the internet. but i had all the correct info in. it try's to connect. yet does not connect. the AP Mode works. CL (Client)
View 7 Replies
View Related
Jun 13, 2011
My laptop computer is having difficulty connecting to a wireless internet. I just bought a brand new router but still having difficulties. Once I start up the computer it works but if I take a break from the computer (computer times off or I close lid) it will stop working. It reads the router but states identifying and has a X between router and internet.
View 1 Replies
View Related
Jan 24, 2013
I'm having an issue with my wifi connection. Since 3-4 hours i can't access internet, although my router configuration page says that adsl is ok. But then i noticed that the download of ubuntu through p2p client continued working. I've also tried with another pc and with two different wifi adapters, but unfortunately i can't try wired connection.
View 1 Replies
View Related
Dec 28, 2012
My connect on demand is not working.Every time i have to go to router web page and click on connect.i tried to talk to the live chat on the website but the answer they gave me is that in e900 the connect on demand doesn't connect to the Internet automatically and we have to go to the router status page and then click on "connect".
View 9 Replies
View Related
Jan 29, 2013
I can no longer browse through any browser, or update any programs (even though I am still connected to my wireless router). I have already done a Refresh, but the problem persists
View 2 Replies
View Related
Feb 8, 2012
I am using a broadband internet of a provider named BSNL,through a simple modem. Recently I got a Beetel 450BX1 ADSL2 + Router and want to use the wireless capability of the laptop so that I don't have to be glued to my table. The OS I'm using is Windows 7 Ultimate (32 bit) on an HP Compaq 6515b.I configured the modem by following the instructions in the following link url...I believe that's a straightforward method for configuring a router, and that accomplishing this is very simple.I followed the steps, only changed the username and password to that given by BSNL.Then, finally I unplugged the LAN cable and clicked on Connect to <connection name>, punched in the serial key. But it does not connect and says "Windows was unable to connect". Even after using Windows Network Troubleshooter the problem is not solved.
View 4 Replies
View Related
Jul 4, 2012
We use our internet to watch Netflix. We have had no problems until recently, I called the satellite Internet company(which is a local co.) they told me my router was going out. I bought a new one, problem solved! Right?!? WRONG my husband told me my neighbor just got Internet and has been playing Xbox everyday which coincidently is between the 5:30pm to 10ish pm we have been having issues with our router. What can we do to fix this? Do I have to buy a bigger router? He is not stealing off mine because it is password protected that was changed when new router was setup and programmed. I have been running of a Cisco Linksys E2500 advanced dual band n router. The router is in the same room as the TV accessing it, which we previously had no issue connecting anywhere in the house or garage.
View 1 Replies
View Related
Aug 6, 2011
We got a lynksys model at our home. it seems that everything is working the pc's connected with cables are working with internet. The wifi sends out and you can get on it. But internet isn't working with wifi also if it says connected etc.
View 1 Replies
View Related
Jul 8, 2011
We have the E3000 Router and the guest internet access DOES NOT work. We occasionally repair other people's PC's and I seriously do not want to allow access to our home network. Recently, we are trying to access through guest, on a Win 7 Dell Notebook. It takes the passcode but no internet connection.
View 1 Replies
View Related
Nov 29, 2012
I recently buyed a Linksys EA6500 wireless router. I accessed [URL] to access the settings interface of the router. Went to "Connectivity Internet Settings" and chose type of the internet connection as PPPoE. Entered the username and password, clicked ok.
No internet access.
View 9 Replies
View Related
Sep 28, 2011
I have had a WRT54G V3 router working successfully for a number of years now with a couple wireless PCs through a cable modem with Comcast as my ISP. All of a sudden yesterday, neither PC could access the internet. No changes had been made to the router.
I contacted Comcast and they of course had me hard-wire one of my PCs into the cable modem. That worked and I was able to access the internet. However, when I tried to put the router back in place (in either a wired or wireless fashion), I could not access the internet.
I've tried following the online Linksys troubleshooting document ion. The lights that should be lit on the router are lit. I can access the router setup web page which shows the settings still intact. I've tried going through the power sequencing to no avail. Comcast says my router is the culprit of my problem, but I don't know why it would all of a sudden stop working. My wireless printer still works so it detects a signal and my PC shows it's connected, but no internet access is possible.
What do I need to do? Are there any other diagnostic tools available? I'm out-of-warranty.
View 4 Replies
View Related
Sep 13, 2012
i am a using a WRT54GH linksys router.. which was working fine for a year.. there was thunderstorm and lightning a few days back.. since then my routers internet port (the first port which says internet in yellow) has stopped working..
View 5 Replies
View Related
Jan 28, 2012
I have WRT150N, with firmware version 1.01.9 and I can not get the internet access policy to work.Here are my settings: PC list is configured through IP range as follows:Even if I deny internet access completely, I can still access the internet.
View 2 Replies
View Related
Feb 3, 2013
I'm having a bit of trouble with my e4200, It keeps on "dropping" connection, and by dropping I mean it constantly around 3-5 minutes the internet stops working with all my computers, it's connected by wifi with 2 PC's, and 1 PC is wired with an ethernet cable, and I also have 2 mobile devices connected at it. The internet would start working again within 30s, to 1m, but that it drops soon.Methods I've done to fix it:
-Updated firmware to the latest one
-Set the MTU to 1400
-Reset it, (30 second press)
-Rebooted, (Cooled down, doesn't really run hot just a little warm)
-Restored to factore defaults
View 4 Replies
View Related
Jul 11, 2012
I purchased an e4200 about 6 months ago and it worked great until the other night the Internet stopped working on my laptop (wireless). I tried unplugging both my modem (Motorola Surfboard) and router and plugging them back in, but no luck. I can accesss the Internet when plugged directly into the router (with both my PC and laptop), so it looks like the issue is with the e4200. To make matters worse (and I fear much worse), I can't even access the admin page to the router through either the Cisco Connect software or through the IP address. I've tried resetting it, I've tried the 30/30/30 reset (holding the reset button while doing an unplug and pluging back in), and reinstalling the Cisco Connect software, all to no avail.
I've found threads where others have not been able to access the admin page, but they still had access to the Internet url... I haven't found a similar thread where the router doesn't seem to work at all. A few other bits of information I can think of (let me know if there's other information I can provide):The Cisco logo light flashes slowly after reset which I believe is expected.The lights in back of the router seem to work as intended.Running Windows 7 Diagnostics finds the connection "doesn't have a valid IP configuration" and "The default gateway is not available."
View 9 Replies
View Related
Aug 2, 2012
I have a Linksys WRT54GS2 router, a PC (Windows XP) and a laptop (Windows 7 Ultimate 32 bit).I have been using this router for 3 months. I was able to use the internet on both devices simultaneously until now. But suddenly since yesterday it only works for one device at a time, not both.
If I connect to the router then I can access the internet only from the laptop. To use the internet from the PC, I have to power off the router, type in run "netsh int ip reset resetlog.txt", and restart the PC. But as the router is off, the internet is inaccessible on the laptop.
While router is on, the PC shows limited or no connectivity.
I tried reseting the router 2-3 times.
On the laptop it sometimes shows "IP address conflict has been detected", even though the IP addresses of the devices were not the same. The IP address of the PC shows 169.X.X.X (when the router is on), whereas the ISP's IP addresses start with 124.X.X.X.
View 1 Replies
View Related
Nov 7, 2011
I'm having a networking issue that I cannot resolve.My DirecTV HD DVR receiver (HR21-700) shows a working connection to both my network and internet. However, the STB services port (range of 27161-27192) will not connect through my router (linksys E4200) automatically or manually (Dtv error code 301). By connecting the receiver directly to my modem, the STB services port will connect as it should. I also have a XB360 (LAN), BluRay Player (LAN), two PCs, & Wireless Bridge connected with absolutely no issues. Each are manually configured with a static IP and the proper ports forwarded.I am STUMPED and FRUSTRATED to say the least.Other than the manual setup of these devices, my networking knowledge is not very broad.Are there any settings or configurations that I may be overlooking?The uPnP is enabled, NAT is enabled, and all firewalls are turned off.
View 6 Replies
View Related
Apr 10, 2011
My belkin 54G was working few years now. Just hours ago, I try to connect my iphone 3GS with belkin wifi. I go to the 192.168.2.1 (on my laptop - wifi), MAC address filtering and enable it. After insert my iphone 3gs ip address i press OK.
Here's the nightmare begin, after minutes. My internet connection is not working both on my laptop (wifi working but not internet) and the PC facing problem on internet connection. i try login again 192.168.2.1, hoping can restore it but it fail to load the page.
how to restore it?
Below is the screenshot of what I did.
1. my ipconfig show new IP address, 169.254.242.229. i try using this address to access but fail to load.
2. ping 192.168.2.1 but unreachable.
3. detail of my network connection details.
4. set my TCP/IP properties
5. ipconfig manage to change it and ping working now.
6. to my disappointment, 192.168.2.1 still not working. can't enter it's web interface.
View 6 Replies
View Related
Feb 7, 2011
The internet at my parents house has recently gone on the fritz..the wireless router is a N600 Wireless Dual Band Router WNDR3400..The computers of the house are able to connect to it..But it does not allow internet connections..The 3 computers are an HP Laptop running windows 7.a Dell Dimension E521 Running windows 7 & and an older HP Walmart special running XP.They can connect to outside systems and through a wired connection to the Modem from Cable vision. They replaced the wireless router and the problem continues.Internet is capable by plugging directly into the Cable vision router,unfortunately do not have the cables to try through the Netgear router to test that out..
View 3 Replies
View Related
Jul 3, 2012
There is no "blinking light" indication on my E3000 at the Internet (Yellow label) and Ethernet port no 4. I tried plugging in 2 cables at all of the ports. I got the blinking indication at Port 1 through 3. The same cable's have no response at Port 4 and Internet port. As a result my I am not able to connect to the internet.
View 2 Replies
View Related
Nov 13, 2011
i have two a laptop and a notebook, i have moved into a new house at university and have a great internet connection with everything working brilliantly! for the first time today i tried to connect my actual laptop to the internet but it wont. It connects to the correct router and that router is working fine but my laptop says 'local only' and will not let me connect to the Internet at all?
View 1 Replies
View Related
Feb 19, 2013
I have a D-Link DIR-615 router and can't get the internet working and have done everything possible to get it working. the globe light which is the internet light will not turn from amber to green. I have done a factory reset which is why this occurred in the first place. After the reset the globe stayed orange and the internet refused to work now everything is up but the wireless will not work nor the internet I have gone through both the manual set up and set up wizard and tried all options.
View 8 Replies
View Related
Jul 29, 2012
My father has his computer connected to a router which is then connected to his modem and has been having difficulties getting onto basic internet websites.He unplugged the router to restart it and forgot about it.Then he tried to access the internet and it is running smoothly while still connected to an unplugged router. And How do we get the wireless connection back without screwing up the desktop connection? In addition, the desktop computer says that it has no connection and that a network cable is unplugged.
View 2 Replies
View Related
Oct 5, 2012
I have a TP-Link WA500G, routers are not allowed but other people have from eighbouring flats have set them up as I can see at least 3 now.I have set up a password and selected it to be a Wireless AP.Each room has it's own ethernet socket and that socket has a unique IP, Like 141.163.180.XXXDo I have to enter the IP that it is plugged into into any of the fields like gateway or in the DHCP settings
View 5 Replies
View Related
Feb 4, 2011
I'm at my brothers house for a few months and trying to get my laptop connected wirelessly to his network. They have multiple computers and their laptops all are able to connect wirelessly. My laptop is able to connect via cable. It also gets a local connection wirelessly, just won't connect to the internet so I'm assuming it's a setting on my computer. It's a Linksys E3000 router. I have an HP G60-235DX laptop running Windows Vista Home Premium.
View 12 Replies
View Related
Feb 12, 2011
I just got a used wireless router (didn't get any cords yet). I have an old wired modem that connects to my pc to give me internet. It uses a cable (not ethernet cord) that plugs into the wall. My wireless modem is a Linksys Wireless-G Broadband router model number WRT54GS and for the internet connection uses ethernet. How can i connect the wireless router to the internet so i have a wireless connection? I tried plugging the ethernet cord into my modem and the other side into the internet port in the router, but it didn't work.
View 14 Replies
View Related
Dec 7, 2011
My laptop and desktop connect to the router and they can see eachother and everything but the router won't connect the computers to the internet. When I try to open a webpage in the inter net it says its a DNS error but I don't know. When i connect a computer directly to the modem it works though. They are both HP with Windows Vista.
View 4 Replies
View Related
Dec 7, 2011
Can I use a wireless router to connect to the internet on my PSP Because I can't find any other access-point.
View 2 Replies
View Related
Oct 26, 2012
Connect wireless router to the internet and it doesn't work after calling the verizon
View 1 Replies
View Related
Oct 18, 2012
I want to replace my old DIR-615 v4 d-link router with my new WRT160N v3 linksys router. The thing that I did was I simply disconnected my old one and plugged in my WRT, my Laptop detects it but it wont connect to the internet. Also I'd like to use my old wifi username and password on my new router so I dont confuse all my other family members with the new router.
View 3 Replies
View Related
Dec 27, 2012
How do I connect to the internet uing a wireles router
View 1 Replies
View Related
