Linksys Wireless Router :: HR21-700 Shows A Working Connection To Both Network And Internet
Nov 7, 2011
I'm having a networking issue that I cannot resolve.My DirecTV HD DVR receiver (HR21-700) shows a working connection to both my network and internet. However, the STB services port (range of 27161-27192) will not connect through my router (linksys E4200) automatically or manually (Dtv error code 301). By connecting the receiver directly to my modem, the STB services port will connect as it should. I also have a XB360 (LAN), BluRay Player (LAN), two PCs, & Wireless Bridge connected with absolutely no issues. Each are manually configured with a static IP and the proper ports forwarded.I am STUMPED and FRUSTRATED to say the least.Other than the manual setup of these devices, my networking knowledge is not very broad.Are there any settings or configurations that I may be overlooking?The uPnP is enabled, NAT is enabled, and all firewalls are turned off.
View 6 Replies
ADVERTISEMENT
Aug 30, 2011
Do I have a virus my when I try to get on the internet at home is wont allow me in, it keeps popping "not working at time" my wireless is good. what can i do?
View 1 Replies
View Related
Aug 6, 2011
I need to know why I am losing internet connectivity like around nighttime, late. I keep losing internet on both IPv4 and IPv6! It both said "No Internet Access" Then later IPv6 said "No Network Access" That's the problem i am having on my personal laptop computer. I really am furious that I lost internet connection around 12:15, 12:30, 12:50, 1:30, 2:15, 2:30, and 3:30 A.M. i suddenly lost internet right there. And I heard the internet crew shuts down the internet system every nighttime and fixing it. I want to know why they need to fix it, how long will the repairs last ?
View 1 Replies
View Related
Nov 29, 2012
I recently buyed a Linksys EA6500 wireless router. I accessed [URL] to access the settings interface of the router. Went to "Connectivity Internet Settings" and chose type of the internet connection as PPPoE. Entered the username and password, clicked ok.
No internet access.
View 9 Replies
View Related
Sep 28, 2011
I have had a WRT54G V3 router working successfully for a number of years now with a couple wireless PCs through a cable modem with Comcast as my ISP. All of a sudden yesterday, neither PC could access the internet. No changes had been made to the router.
I contacted Comcast and they of course had me hard-wire one of my PCs into the cable modem. That worked and I was able to access the internet. However, when I tried to put the router back in place (in either a wired or wireless fashion), I could not access the internet.
I've tried following the online Linksys troubleshooting document ion. The lights that should be lit on the router are lit. I can access the router setup web page which shows the settings still intact. I've tried going through the power sequencing to no avail. Comcast says my router is the culprit of my problem, but I don't know why it would all of a sudden stop working. My wireless printer still works so it detects a signal and my PC shows it's connected, but no internet access is possible.
What do I need to do? Are there any other diagnostic tools available? I'm out-of-warranty.
View 4 Replies
View Related
Sep 17, 2011
I purchased my WAT54G a couple of years ago when I added a laptop, I have my desktop which is connected to DSL and a wireless printer and my laptop.A neighbor told me that I should secure my network as he has used it when his system went down. My son had added a P/W when we first set up the router.I have since found the NETWORK MAP on which shows all the users on the network and half my street is on there.I have again added a P/W how do I know if its SECURE?
View 2 Replies
View Related
Feb 18, 2013
I'm not sure why the guest net work is unsecured. I would have thought that would not be an option but it is unsecured. How to secure the guest network [2.4 GHz]? Also when I view the guest list some devices stay displayed whether they are in the vicinity or even turned off. That adds to my paranoia with the guest network being unsecured. I also can't edit the screen names to know who the device belongs to like is available in "my devices", forcing me to keep a MAC address list.
View 2 Replies
View Related
Jul 26, 2012
I have a E2500 router and just got this AE3000 adapter. Thought that would bump up the wireless signal for using my laptop at the other end of the house about 75 feet from the router. The new E2500 Wireless N has been a big improvement. The AE3000 installed perfectly and shows up as working properly. It's just that the signal strength on my laptop shows 2 bars and the signal strength for the adapter shows 2 bars.
View 2 Replies
View Related
Jun 27, 2011
I am not that good at troubleshooting network issue but luckily I was able to figure out a problem I had with internet connection not working through my Linksys router. My computer is connected hardwire through a wireless router (linksys) and I have 3 wireless devices that connect to the wireless router.I have had the wireless router for about a year and half. I set it up myself and have had no problems since day one until today.It was working fine this morning, my computer was on the whole time, I never shut it down and all of a sudden a couple hours later went back to my computer and couldn't access the internet. "No internet access" message on the taskbar right hand side.Not one of my wireless devices connect to the internet including my desktop that is hardwired.
I tried resetting the modem...no luck. I'm thinking outage or something else that had to do with my cable company. I called them, the lady had me try without the router, worked fine, problem with router.I called linksys since I am not good at troubleshooting router issues and did not want to reconfigure everything and start from scratch.The lady at linksys says the router is out of warranty and after a year they cannot provide free tech support and wanted to charge me for either two of their paid tech support which the cheapest was 30 bucks. After some time of trying to figure out the problem I notice my ip address was different.
View 5 Replies
View Related
Mar 24, 2011
I'm trying to get a wireless router working for friends. I got it to work yesterday, but now it is no longer working. [code] If I connect my computer to the HAG, it, of course, works fine.Yesterday, I hit the reset button on the back of the conitech router (because they didn't have the password) and went through the setup wizard, connecting my HAG to the WAN port on the router and it worked fine, both connecting via wireless and with a cable to one of the LAN ports on the router.Today it is no longer working. Both wireless and LAN show it is connected but I can't access the internet.
View 6 Replies
View Related
Nov 28, 2012
I just got my fathers old linksys WRT54GL. I Have resat everything, and made my own name, password etc.When i try to connecet, i can get on the network, but there's no internet connection. Even when i put an ethernet cable between, it does the same. i have internet connection when i connect directly to the router though.
View 1 Replies
View Related
Dec 17, 2012
Recently installed a new CISCO DPC3825 and set up for wireless. I can connect to the network, signal strength excellent, but NO Internet. i have read a few threads showing similar issues, but i am getting lost when i try to troubleshoot further. i ran a command 'ipconfig/all' and got some data. I am confused also as under my network adapter it says 'media disconnected' .
View 1 Replies
View Related
Apr 2, 2012
I have a home network with a Linksys E4200 connected to the ISP's fiber box. The problem is that when I'm connected to the Linksys, either wired or wireless, the connection to the internet will drop after what seems to be a random amount of time (normally anywhere from 2-10 minutes). I can restore the connection by doing any of these things:-reboot Linksys-disconnect and reconnect cable from router to fiber box-if on wireless connection, make changes to the router wifi settings, like change the wifi channel.The internal network stays up, and I can ping both the internal and external ip of the router, but not the fiber box. I have also had the same behavior with an Edimax Wifi AP and less frequently with a Edimax router (once every 1-2 days). I have done everything I can think of:-changed the wifi channels-changed the ip ranges, subnets, turned router DHCP off and back on-booted the fiber box-changed cables-updated all routers to the latest firmware, the network cards with latest drivers...and loads other things that I don't remember right now. For the wifi side of things, there are no other networks in range that could interfere. The same problem occurs on both my and wife's Win 7 laptops and on the iMac (latest OSX). Here's a fun detail: while the Linksys has lost its connection to the internet, I can still access the internet through the old Edimax router connected to the same fiber box, either wired or wireless.
View 1 Replies
View Related
Sep 18, 2011
I have a very annoying problem with my Linksys WRT54G2.When I connect a wireless device (laptop, phone, TV, Ipad) to my wireless network I only see a Local connection, no connection to internet. After resetting the router (power off for several seconds) the internet-connection is available again.I have to do this every 1 - 2 days.
View 7 Replies
View Related
Mar 10, 2013
I am currently connecting my PC to a mobile phone as a Wireless Access Point to give that PC access the internet. I also have a small home network, with one other PC and a Game Console. I own a Linksys E900 Wireless-N300 Router. My problem is this. How do I share that internet connection with the rest of the home network?To the best of my knowledge its not possible to connect my mobile phone directly to my Linksys E900 Wireless-N300 Router.
So my alternative idea is to connect to the internet via one PC, set up that internet connection as "Shared." and then allow the other devices on the home network to connect thru this. My question is how do I set up my Linksys E900 Wireless-N300 Router to allow my other PC and game console connect to the internet? Bridge Mode? PPPoE?
View 1 Replies
View Related
Jul 19, 2011
I have a Vaio laptop that shows full bars connection to my Belkin_Enhanced_E98E8F modem but when I try to connect them it tells me "the wireless security key is not correct". Well, i know for a fact it IS correct.
View 1 Replies
View Related
Feb 18, 2013
My network shows no access and the specific connection says "limited access".
View 2 Replies
View Related
Feb 5, 2013
network icon missing which shows the status of the connection
View 8 Replies
View Related
Jun 21, 2011
The latest Firmware for the E4200 states that there is now the ability to attach a printer to the USB port of the router. I am using a Mac, so that may be the problem, but I have followed the instructions on how to add the printer and it is not happening. It's possible that the MAC Firmware was not given the ability to add a USB printer like the PC Firmware upgrade.
View 9 Replies
View Related
Sep 8, 2012
I have 2 laptops in my home, I had no problem getting one to connect to the internet. The second one I'm having trouble connecting, I am wireless, I didn't have a problem at my old house with another laptop connecting to the internet with this router. I'm trying to save myself some money by not going through my wireless company, and end up having to get their router, which I already have their modem.
View 1 Replies
View Related
May 6, 2011
ok so ive been messing with my aunts desktop trying to get it to run online.
her network adapter SAYS its connected but when i try to actually go online it says its not connected.
i checked the connection and it does say its connected. it is a fresh install and i reinstalled the driver for the internet.
ive unchecked the automatic config for the net options (saw in some suggestions)
View 4 Replies
View Related
Jun 24, 2012
I have the WRT54G router for years and use it to provide both a wireless network for our home computers and a wired network for by internet phone that connects me to my office phone system and for my work computer and printer. Last week, the wired network stopped working. I checked the wiring and plugged my wire into all four of the ports in the back of the router with no success. I followed the troubleshooting procedure that I found and changed the MTU setting. I tried to update the firmware but the screen seemed to lock up and I was unable to complete the task.
View 9 Replies
View Related
Jul 28, 2011
I've had the WRT400N for about a year and a half now and just last night it stopped sending out data when connected to my cable modem. I've tried connecting the modem directly to my Mac and it works just fine (that's how I'm sending this message now). But when the modem is connected to the router, I get no data. It connects to both the 5 Ghz and 2.4 Ghz networks, but it refuses to send data through the pipe. I've tried power cycling both the modem and the router to no avail.
View 1 Replies
View Related
Jun 14, 2012
I recently upgraded my Wild blue internet service to the "Exede" system. When I kept losing the connection to my Mac Air book, the Wild blue service tech suggested that my wireless router (Linksys Wireless G 2.4 GHz router) was not robust enough to handle the increased "speed". They recommended I purchase a new router so I purchased the Linksys EA4500.
Now, after three weeks, the Linksys EA4500 router has stopped working. I am able to hook one of our Mac Books directly to the satellite modem to access the internet through an Ethernet connection. Finally, I finally reconnected my old Linksys Wireless G router to the modem to check to see if it would work and it does.
So, I'm wondering about the failure rate of the new Linksys EA4500 routers? Is there anything else I might try to get my new router to work??? I have unplugged it for an hour and then re connected it. I have pushed the reset button..My wireless indicator on the Mac Book Air shows full signal strength, but I can't connect to the internet with my new (less than 3 weeks old) router.
View 3 Replies
View Related
Oct 23, 2012
My lenovo notebook shows internet connection is there but web page doesnt load
View 4 Replies
View Related
Mar 9, 2013
I've tried all sorts of settings, and I'm still holding out that its a setting possibly, but I have a E3500 and devices on both 5Ghz and 2.4Ghz... Most of them, probably when idle, seem to stop working over WIfi. They still have decent connection, but every internet related request just times out. Disable and reinable the wifi and it works great again.
Could this be defective wifi radios? or could it really be interference? I have it happening on multiple devices. Also, I'm not far away from the router when it occurs, and when I reconnect, it seems to work just fine for a while. Basically the big problem is on the cell phones and tablets because I'll miss notifications... I'll turn off the wifi and turn it back on when I use the device next, then a flood of notifications will come in. Again, it's not just a phone thing, tablets and laptops have the same problem, that's just the main reason I want it fixed.
View 5 Replies
View Related
Dec 25, 2011
I am having Inspiron N4010 for almost an year now. I have had many troubles with this but never with internet connectivity. Last week I saw myself not being able to be connected to internet through wireless or wired network while everybody else was connected and surfing. I just thought it to be a small problem and the problem seemed resolved that very day itself on its own.
But today this computer has simply failed to get connected. it does get connected, open a page or two and then again refuses to connect. On the problem diagnoses from network sharing center, it was showing that the websites are not responding, then it started showing that DNS server was not responding while all my setting are correctly configured. I pinged gateway and it responds but on pinging some website there is no response at all. It s a problem with my laptop only as everybody else are using internet very well. I am using internet through my WiFi enabled cell phone using the same connection and router that i use for my laptop. I need an urgent solutions as I have to meet some deadlines regarding assignments.
View 4 Replies
View Related
Jul 24, 2012
I have a Century Link modem connected to a Linksys router. I have three computers hooked up wireless. I used another computer to hook up with the ethernet cable because that wouldn't work wireless for some reason. A little while after that, the Linksys network stopped working completely(all three computers could not access the internet). Now I can only connect to the internet if I use a ethernet cable from the modem.
View 2 Replies
View Related
Jun 24, 2011
I cannot get the Guest Network feature to work.Even though Guest SSID is enabled, it does not show up on any devices attempting to connect. Manually connecting by entering the Guest SSID fails (not recognized). On devices with the primary 5 and 2.4 GHz configured they do see the third network but without SSID (unknown) and are also unable to connect to it manually using the SSID.I did not try this before 1.0.02. Have rebooted modem and verified all configs (multiple times). The network is live in an office and can't keep screwing with it or drastically changing its settings.
View 9 Replies
View Related
Jan 17, 2012
I used to have a WRT54G Router at home. I would regularly use Cisco Systems VPN Client to connect to my work router and the RDP to my work PC. (The router at work is Cisco 2811.)A couple months ago, I finally upgraded my home router to a Linksys E1000. Since that time, I have NOT been able to:1) Connect from my work PC to my home PC using Windows RDP2) Connect from home PC to VPN at work via Cisco VPN ClientIt's like the Linksys router at home an Cisco router at work refuse to speak to each other.A week ago, I finally gave up and bought a Linksys E3000. Exact same connect problems as the E3000.To test, I plugged my old WRT54G back in just to see, and lo and behold, all my connection problems go away. Plus the E3000 in again, and I cannot connect b/w home and work.A few other notes:From work, I have successfully used RDP to reach out to other test PCs (friends computers), but I can't get to my home network with the E3000 working. I also can connect to home via RDP using other internet connections, like if I'm in a hotel or airport.It's just that my Linksys E3000 at home and the Cisco 2811 at work refuse to acknowledge each other.
View 6 Replies
View Related
Jan 9, 2012
WRT610N router with v2 firmware stopped working correctly. It loses wired connection via LAN ports.My home network has one PC connected to LAN port 1 and two PC connected via Wi-Fi.Recently unexpectedly the PC with wired connection lost connection.
The symptoms are the following:
- The DHCP local network address is obtained not every time.
- The router (192.168.1.1) not usually responds to ping (returns "host is unreacheable) and I even unable to connect to router's web interface.
- The led for the 3rd LAN port on the front face of router is always on while nothing was ever connected to this port.
- Wi-Fi clients (Windows XP) obtain DHCP address for 30 seconds then report that connection is limited and in a few seconds report that everything is
- The internet for both type of clients is almost not accessible (Wi-Fi is better)
Sometimes (but very rarely the wired connection works fine.
I suppose in my case this is a hardware problem. Can this be repaired of fixed somehow?
View 9 Replies
View Related
Aug 6, 2011
We got a lynksys model at our home. it seems that everything is working the pc's connected with cables are working with internet. The wifi sends out and you can get on it. But internet isn't working with wifi also if it says connected etc.
View 1 Replies
View Related
Feb 15, 2013
I am a powerbook G4 user, Mac's wireless is good so far.OSX 10.4.11 and when I am using E1000 extender, often the admin page shows up automatically like 192.168.1.1 and asks me to log in and once I log into the admin page, of corse show up the admin page.So, all my other internet pages are gone every time.Only shows the admin page.It does not happen with windows PCs.
View 1 Replies
View Related
