Linksys - Wireless Router Not Working / Network Stopped
Jul 24, 2012
I have a Century Link modem connected to a Linksys router. I have three computers hooked up wireless. I used another computer to hook up with the ethernet cable because that wouldn't work wireless for some reason. A little while after that, the Linksys network stopped working completely(all three computers could not access the internet). Now I can only connect to the internet if I use a ethernet cable from the modem.
View 2 Replies
ADVERTISEMENT
Sep 23, 2012
I tried searching google and Cisco Home Community for this answer, but no luck. Maybe I didn't phrase my search correctly. I have an external drive connected to a mac mini which is shared on the network. When transferring folders to or from that external drive, our internet connection stops working until the transfer finishes, then comes back up. I've tested this in a variety of ways. Any transfer of data from shared folders in any combination of devices causes internet to stop working both on wired and wireless devices until the transfer is done, then they all work again. Router firmware: 1.0.03.
View 9 Replies
View Related
Mar 8, 2012
My router randomly stopped working after I bumped into the wire. It still shows up as a network you can connect to, but whenever I try to connect, it keeps saying there is a problem with my connection. I tried using a different internet cord, but nothing changes. I even tried to reinstall my router and still no dice.
View 6 Replies
View Related
Dec 19, 2012
EA4500 was working fine for about 2 months.Now, its not so happy.Power indicator is on.Plug something into one of network ports - nothing, and no indicator LEDs are on.Plug an operational internet cable into it - nothing, and no indicator LEDs are on.
View 3 Replies
View Related
Feb 2, 2012
Last night, my wireless router suddenly stopped working. I no longer saw my router listed in my available wireless networks, and neither could my girlfriend from her computer. I unplugged the router to see if one of the available networks had disappeared in case my router had somehow been reset, and nothing changed so my computer isnt even seeing my router. Right now, I am wired through the router so I know the router works, but the wireless part doesnt for some reason. I was looking up stuff in the FAQ, and think the firmware is corrupted since the LEDs are all blinking. I was trying to update my firmware following the instructions I found using tftp.exe, however it failed. One problem is that I can't set up a static IP address since I need to access the web-based utility to check my DNS server but I cannot access the web-based utility anymore (maybe cause of the corrupted firmware?). On a related note, there is someone else in my building using a linksys with the default network name of linksys. I had changed my network's name and security-protected it, though that is all likely gone now since I tried to reset the router. My question is what will the network name of my router be if I saw it since "linksys" is already taken. or will there just be two of them?
View 1 Replies
View Related
Oct 19, 2007
I have WRT54G connected to a cable modem for internet service. Came home at lunch yesterday and all was working fine. Came home after work last night and couldn't connect to the internet. Called Charter cable this morning and their troubleshooting showed I can connect to the internet fine if I bypass the router, so the issue must be with the router (and of course not their problem...). How do I trouble shoot this? I've tried powering down the router and releasing and renewing IP addresses but it hasn't worked.
View 9 Replies
View Related
May 29, 2012
I have a Linksys WRT54GS wireless router that has stopped working. All it will do is all 4 of the Ethernet port lights on the front light up solid green along with the Internet light. Is there any hope of fixing this?
It wouldn't make that much of a difference, but I already purchased a new LInksys Cisco EA3500, but I cannot get it to do my port forwarding. I have tried everything and nothing works. Have spent hours on the phone with tech support with no solution. My old WRT54GS just simply worked. The port forwarding worked perfect. I have tried the exact same setup in the new EA3500 and no luck no matter what I try.
So, is there anything I can do to get the old WRT54GS working? I have tried holding the reset button in for 1 minute and then unplugging it
View 3 Replies
View Related
May 30, 2012
My M20 Valet Plus stopped working suddenly last night. Now no power lights will come on and it now longer transmitts as a connection point . No apparent sign that it's alive. I've owned it troublefree for just over a year, but it is out of warranty. Any way to tell if there is hope of reviving it or if I'm just out of luck? Nothing happened at my end to cause this -- no power interruptions or other odd occurrences.
View 9 Replies
View Related
Oct 17, 2010
A couple days ago I noticed that my wireless internet connection on my iPhone would cut in and out, then stopped all together. I also had no connection on my mac which is wired to the WRT110. I bypassed the WRT110 and then I had a connection on my Mac meaning the WRT110 is the problem. I haven't changed or added anything lately that could've caused this....
View 9 Replies
View Related
Jul 25, 2011
I have the Linksys WRT54G And it was working fine for years! Then today my computer shut down and when I turned it back on there was a connection but my computer was not responding to any commands. The icon shows full connectivity excellent connection. When I try to go to a web page it shows Connection Error and cannot get to any web pages.I am able to get on other wireless connections from neighbors but not mine. I have gone thru different directions on here and I am not technical and don't understand what is being said. I try to go to 192.168.1.1 and it asks for a password which I don't have. I have tried everything such as password and admin and get nothing.I am able to get my ip address and default gateway address and don't know the next step.
View 1 Replies
View Related
Jun 24, 2012
I have the WRT54G router for years and use it to provide both a wireless network for our home computers and a wired network for by internet phone that connects me to my office phone system and for my work computer and printer. Last week, the wired network stopped working. I checked the wiring and plugged my wire into all four of the ports in the back of the router with no success. I followed the troubleshooting procedure that I found and changed the MTU setting. I tried to update the firmware but the screen seemed to lock up and I was unable to complete the task.
View 9 Replies
View Related
Jun 20, 2011
I was using my iphone one night last week and suddenly it dropped out and now I cannot find it in my WIFI networks page.I am using a Linksys E1000?
View 9 Replies
View Related
Jul 28, 2011
I've had the WRT400N for about a year and a half now and just last night it stopped sending out data when connected to my cable modem. I've tried connecting the modem directly to my Mac and it works just fine (that's how I'm sending this message now). But when the modem is connected to the router, I get no data. It connects to both the 5 Ghz and 2.4 Ghz networks, but it refuses to send data through the pipe. I've tried power cycling both the modem and the router to no avail.
View 1 Replies
View Related
Sep 13, 2012
i am a using a WRT54GH linksys router.. which was working fine for a year.. there was thunderstorm and lightning a few days back.. since then my routers internet port (the first port which says internet in yellow) has stopped working..
View 5 Replies
View Related
Feb 28, 2013
The router stopped working for wired connections. I can still go online using my laptop via wifi, but when I connect a network cable to the laptop and turn off wi fi, connection does not work. Can't go online with a desktop with a wired connection to router.Everything else works via wi fi: iPad, android phone, tv with wifi.
View 1 Replies
View Related
Jul 11, 2012
I purchased an e4200 about 6 months ago and it worked great until the other night the Internet stopped working on my laptop (wireless). I tried unplugging both my modem (Motorola Surfboard) and router and plugging them back in, but no luck. I can accesss the Internet when plugged directly into the router (with both my PC and laptop), so it looks like the issue is with the e4200. To make matters worse (and I fear much worse), I can't even access the admin page to the router through either the Cisco Connect software or through the IP address. I've tried resetting it, I've tried the 30/30/30 reset (holding the reset button while doing an unplug and pluging back in), and reinstalling the Cisco Connect software, all to no avail.
I've found threads where others have not been able to access the admin page, but they still had access to the Internet url... I haven't found a similar thread where the router doesn't seem to work at all. A few other bits of information I can think of (let me know if there's other information I can provide):The Cisco logo light flashes slowly after reset which I believe is expected.The lights in back of the router seem to work as intended.Running Windows 7 Diagnostics finds the connection "doesn't have a valid IP configuration" and "The default gateway is not available."
View 9 Replies
View Related
Jul 31, 2012
My router was working just fine forever, the only computer that will connect VIA wire is my desktop, everything else for it to connect to my network it has to go wireless. Things like my blu ray player just will not connect. I am not an expert at all, but why is only the wireless working? I can use the Cisco connect and adjust the settings if need be.
View 5 Replies
View Related
Mar 3, 2008
Last night, my wireless router suddenly stopped working. I no longer saw my router listed in my available wireless networks, and neither could my girlfriend from her computer. I unplugged the router to see if one of the available networks had disappeared in case my router had somehow been reset, and nothing changed so my computer isnt even seeing my router. Right now, I am wired through the router so I know the router works, but the wireless part doesnt for some reason. I was looking up stuff in the FAQ, and think the firmware is corrupted since the LEDs are all blinking. I was trying to update my firmware following the instructions I found using tftp.exe, however it failed. One problem is that I can't set up a static IP address since I need to access the web-based utility to check my DNS server but I cannot access the web-based utility anymore (maybe cause of the corrupted firmware?). On a related note, there is someone else in my building using a linksys with the default network name of linksys. I had changed my network's name and security-protected it, though that is all likely gone now since I tried to reset the router. My question is what will the network name of my router be if I saw it since "linksys" is already taken. or will there just be two of them?
View 3 Replies
View Related
Mar 5, 2012
My Linksys router stopped working. Resetting it didn't restore it.I bought a new Linksys E4200 router and configured it to the same settings as my old router. However, now I can't access certain website like Hotmail, Facebook, a weather site and others.But I can connect to most other websites, stream video, etc. Any suggestions why I can't connect to Hotmail, Facebook, etc???? I have 4 computers (3 wired, 1 wireless) connected through the router and they all do the same thing.
View 5 Replies
View Related
Jun 29, 2011
My desktop was wirelessly connected to a router. It was working perfect, I did a wired connection from the modem to the desktop and when I tried to get the wireless connection again it has not been possible. When I try network trouble shooting I get DNS server might be unavailable. Been reading around and tried many of the things that I've read but none has worked so far.
View 4 Replies
View Related
Jun 26, 2012
My WAG120N router has stopped working completely. None of the Ethernet ports or the wi-fi signal button is lit,power light continues to blink for 10 odd mins and then comes to a rest. Tried to login to admin portal without any success, tried to reset it pressing the reset button in the back without any success.Tried the 30-30-30 reset method without success too.
View 3 Replies
View Related
Dec 20, 2010
My Linksys WRP400 router has stopped working. power led blinks red and orange - phone led 1 and 2 light green - wifi connection not work - ethernet LAN connection not work - ethernet WAN connection not work - router now work in bridge mode - factory reset using Reset switch not work - connected analogue phone not work I try dump traffic using ngrep on LAN and WAN port but no packet comes from the router.
View 2 Replies
View Related
Sep 10, 2012
The other day I went to a friends house, came back home, booted up my PC, and my wireless network adapter wasn't working. I've tried everything to fix it.It's a D-Link DWA-525 802.11n Wireless PCI netowrk adapter. On device manager it just says 802.11 Wireless LAN Card with a yellow exclamation next to it. And when I check what the error is, it's either error 31 or 52 at different times, depending what I've tried to do to fix it.I tried downloading the driver for it off the D-Link website, nothing happens at all when I install it. I tried taking it out of my computer and plugging it in. I tried enabling it and disabling it on device manager.I noticed one thing, when it's in my computer the green light at the back that says activity next to it isn't on.
View 10 Replies
View Related
Nov 29, 2011
I have run three computers on my wireless network for a few years now, and have an HP OfficeJet 6500 Wireless printer that has worked seamlessly on all computers. That is, until I secured my router. I had an open wireless connection that I changed to secure (WPA) a couple of weeks ago and have been unable to connect to my printer wirelessly to print. It will print if connected to USB. The first day I was able to enter in my WPA key just fine, but not since. It doesn't appear to be finding my connection. Oddly enough one of our computers (a laptop) is able to print to this printer so I am not sure. All computers are running Windows XP, I believe with SP3. I use a D-link wireless router. I have tried using the HP solutions to no avail and have checked in the documentation that came with the printer.As an aside, I now appear to also have another wireless connection which is a "computer-to-computer" connection, I believe an ad-hoc connection?
View 3 Replies
View Related
Mar 29, 2011
I have had a WAG320N running problem free for approx 2 months, in that time I've upgraded the firmware 1.00.12 with no issues and has run fine for a month after upgrade. I have 3 laptops connected wirelessly and 2 pc's running wired (through homeplug system) plus TV, PS3 and ipods, all have run without issues.
All of a sudden 2 days ago all wireless connectivity stopped? SSID is still broadcasting and viewable but I can no longer connect with any computer or device. Wired connectivity is working fine.
I've checked security settings, turned off encryption, reset factory defaults, re-downloaded latest firmware and reflashed with no luck. As I said wirless stopped working all of a sudden with no changes to settings.
View 4 Replies
View Related
Jul 2, 2008
I have a new brand dell inspiron 1525 laptop and everytime i boot i get a message "Dell wireless WLAN card wireless network controller stopped working and was closed.
A problem caused the application to stop working correctly.Windows will notify you if a solution is available.I use windows vista premium and dell wireless 1390 802.11g.
View 22 Replies
View Related
Aug 4, 2011
I've had the AE2500 adapter for a few weeks now, and it's worked fine up to this point. When I started up my computer today, however, it wouldn't connect to the network. I've uninstalled the software that came with the adapter and I've tried to reinstall it. However, when I got to the installation step to insert the adapter, the computer would not identify the AE2500. I've tried updating the drivers through the device manager, but I received an error stating that "a device attached to the system is not functioning".
View 6 Replies
View Related
Aug 28, 2012
My wireless router stopped working. diagnostics messages say it could be either bad ethernet cable (not the problem as I am using the cable right now to plug directly in to cable company modem to gain access to internet) OR "drivers not being recognized"
View 1 Replies
View Related
Feb 6, 2010
I regularly get this message (but not everytime) when I start up Windows Vista Home Premium 32-bit.
"Dell Wireless WLAN Card Wireless Network Controller stopped working and was closed.a problem caused the application to stop working correctly. Windows will notify you if a solution is available."
Then I get this following message:"Solution Found: Address a problem with your WLAN card.Your WLAN card has stopped working properly. This is a network adapter that allows your computer to connect to a wireless network. To find out if an updated version of your WLAN card is available, contact your device or computer manufacturer."The strange thing is even though I get this message I am still able to connect to the internet via a wireless network. So there is no problem as such it is just annoying to keep getting this message when Windows starts up.I have checked on the DELL Support website and I do have the most up-to-date driver already (Or I think I do).
The message refers to my:
Dell Inspiron 1520, Dell Wireless 1390 WLAN Mini-Card (with driver version 4.170.25.17)
View 16 Replies
View Related
Jan 5, 2012
[CODE]My router stopped working when I tried to connect my new Samsung Smart TV to the wireless network by using the menu on the tv. I had to go and press the WSL button on the router. I pressed what I though was the WSL button and now my router doesn't work. I has three lights lit up, the power on light, a small green blinking light and an amber light by the number 1.I've gone to the Netgear website and they want $69 for assistance to get my router up and running. I can buy a new router for that much money. There has to be an easier way.
View 2 Replies
View Related
Sep 29, 2011
My dlink dir 628 wireless router suddenly stopped working yesterday. If I plug the ethernet cable directly into my computer and the internet works. I see the wireless profile in the options for the wireless internet, but when I try to connect, it is unable to do so.
I've tried resetting the router (using the button on the device) witand reinstalling the router (using the CD), but still not working. Also have tried turning off the modem, router, and restarting my computer.
View 4 Replies
View Related
Jun 24, 2011
I recently reinstalled Vista on my Dell laptop.Before that,I could view and open shared files on my XP desktop, although the PC couldn't see the laptop.Now, I can get online, but can't see the PC in Network places.I've ensured both have same workgroup name.I think it may be due to Norton Internet Security,which I've renewed and reinstalled from new disk.But the former one didn't prevent file-sharing, albeit one way,XP to Vista.Before I uninstall Norton again, is there anything else I should have done after Vista reinstall ?
View 1 Replies
View Related
Oct 19, 2011
Sometimes my office network stopped than work lan cable good but network problem more than time same problem.
View 1 Replies
View Related
