Wireless D-Link DWA-525 Network Adapter Randomly Stopped Working On Desktop?
Sep 10, 2012
The other day I went to a friends house, came back home, booted up my PC, and my wireless network adapter wasn't working. I've tried everything to fix it.It's a D-Link DWA-525 802.11n Wireless PCI netowrk adapter. On device manager it just says 802.11 Wireless LAN Card with a yellow exclamation next to it. And when I check what the error is, it's either error 31 or 52 at different times, depending what I've tried to do to fix it.I tried downloading the driver for it off the D-Link website, nothing happens at all when I install it. I tried taking it out of my computer and plugging it in. I tried enabling it and disabling it on device manager.I noticed one thing, when it's in my computer the green light at the back that says activity next to it isn't on.
View 10 Replies
ADVERTISEMENT
May 16, 2012
i have an Asus u56e that I recently bought a couple of moths ago. It has been a great computer until today when my wireless randomly disappeared for no reason. The wireless adapter has been disabled for no reason, and when I try to re-enable it, I can't seem to find it.
View 1 Replies
View Related
Oct 6, 2011
recently my network adapter just stopped working. The wifi signal was really bad so i unplugged it and when i plugged it back in it doesnt even turn on. I've reinstalled the drivers and still it doesn't turn on. In device manager there is a yellow exclamation mark next to it and when i click on properties it says code 10. I used it on my laptop and it turns on but when i plug it in my desktop it doesn't seem to turn on.
View 1 Replies
View Related
Nov 18, 2011
I Have a HP dc5000MT desktop. I run an ethernet cable from its network card {Broad NetXtreme Gigabit} to a Westell 327W router{this has worked for the last four years}. My laptop connects to the internet through this router using wireless and for test purposes through the ethernet port. I installed a new network card {Dynex DX-E102 PCI NetworkAdaptor}in the desktop. When i'm enabling either the old or new card through Control Panel, Network Connections, i get the message "acquirin network address,Firewalled".and it never enables. I ran Malwarebytes and no infections were found. I use AVG anti-virus and Internet Explorer.
View 17 Replies
View Related
Nov 3, 2011
It may be a coincidence but my Broadcom Network Adapter 802.11g stopped working after trying to fix 'unknown device' in Device Manager (It was working perfectly before this).OS: Windows 7 Starter on 'BenQ Joybook Lite U105'.I tried the Windows Network trouble shooter and it didn't work (saying there may be a problem with the driver. I uninstalled the driver and re-installed it (including a possibly newer one) and it didn't work. Within 'Network Connections" the Broadcom wireless adapter is shown as 'disabled' I R-clicked to enable it, a window popped up saying it was enabled but it still showed as being disabled. My feeling is that something is preventing it from being enabled, logically, I would guess. Also went to 'Component Services' and ether started or restarted everything with the word network on it still no luck..My Google search on an other pc , now on day 3, couldn't find anything. (BTW the 'unknown device' which according to the icon, seems to be the joybook itself, is still not fixed and still listed as 'unknown device').
View 4 Replies
View Related
Jun 22, 2011
Randomly my router stopped working in the middle of the night. I didn't think the issue was with the router so i called the Tech Support people from Brighthouse and they told me to connect directly to the modem so i did that and I had internet. But why would my router randomly stop working, I've had this Linksys Dual N bound router for a year and never had a problem with it. I want to think that its the internet providers fault but I guess I really don't know.
View 2 Replies
View Related
Oct 30, 2011
I am making my wireless network with Wireless router DIR-600 and DWA-525 desktop adapters for my office. I created a most secured type of network WPA2. And I have to create profile for DWA-525 desktop adapter to connect to my network and it requires the network secret key to connect. But This secret key is viewable from the "Network connection manager" when one can click on modify network and click on "Show text in the password field" by everyone using this computer (I mean by all other office staff). I don't want to let any one know my wireless network secret key. Is there any way to protect the key while having the computers automatically connected to wireless network. More information is below
Model: DWA-525
Hardware Version: A1
Firmware Version: 1.10
Operating System: Windows 7
Service Pack: 1
View 1 Replies
View Related
Sep 3, 2012
I've been using an 802.11 b/g USB wireless network adapter card with my computer to use in conjunction with an AT&T 2Wire router,which is about 20 or 30 feet away off in another room.After about 10 minutes on average, the adapter will stop transferring data suddenly, and it will stay that way for a while. If I do nothing, then sometimes it will start up again after several more minutes, but instead of waiting, I usually will select "Repair" from the Wireless Network Connection pop-up menu, which also works to get it started again. The problem though, naturally, is that after another little while, like about 10 minutes again, it will short out all over again. Sometimes, very rarely, it will stay working for up to maybe an hour, and sometimes, it can short out yet again within a few seconds.
View 9 Replies
View Related
Nov 2, 2012
my wireless connection has stopped working and won't repair itself.I have uninstalled it and rebooted my laptop (as suggested in a previous thread) but it's still not working. I have a Toshiba Satallite Pro L300 laptop.I went to the Toshiba site to find a download for the wireless adaptor but couldn't even find my model number on their system. I can get on the internet by plugging directly to the modem, and my internet provider suggests it must be the adaptor. I'm too scared to randomly download stuff from internet in case it is rubbish and mucks up my computer.
View 13 Replies
View Related
Oct 16, 2011
I was working on the computer and internet just stopped, checked the router and it doesn't show up in air-port pref on my Macbook Pro anymore. It was still on my iPhone, and then a few minutes later disappeared from my iPhones network as well. I've tried hard resetting etc, network name doesn't show up anymore, on ethernet to the modem now but tad uncomfortable sitting on the living room since I have the router and modem in my entertainment center.
All the lights work fine, and it lights up like normal but network went "poof".
Typing in ip of 192.168.0.1 just says google chrome cannot connect to that page. I had to play with my Mac for awhile as it wouldn't connect by ethernet till I figured out I had to uncheck passive FTP from Proxies.
View 4 Replies
View Related
Mar 30, 2012
My computer stopped being able to Remote Desktop to my server on my network. My backup software also doesn't recognize my server. But, I can access its folders using Windows Explorer. Any other PC on the network can remote desktop to the server and connect. What happened to my machine? This message appears when i try to connect: "Remote Desktop can't connect to the remote computer for one of the following reasons:
1) Remote access tot he server is not enabled
2) The remote computer is turned off
3)The remote computer is not available on the network
Make sure the remote computer is turned on and connected to the network, and that remote access is enabled."
My computer is:
AMD: Athlon 64 X2 5200+ 2991 MHz
Mobo: Gigabyte M57SLI-S4 v.2
RAM: 4GB Mushkin DDR2 PC2-6400
OS: Win 7 64bit
VC: Geforce GTX 470
View 1 Replies
View Related
Nov 19, 2012
I've been happily using a desktop PC wired into a router (using an ethernet cable) as well as a laptop that connects wirelessly to the router. This setup has been working fine since I started with it a few weeks ago.
On Friday evening the desktop PC stopped being able to connect to the internet and hasn't been working since. The laptop is able to connect fine wirelessly.
The router light seems to indicate that the ethernet connection is ok. I've tried connecting wirelessly from the desktop PC but that doesn't work either - the Netgear wireless usb adaptor won't open from within Windows as it usually would do.
Nothing has changed to the hardware setup (I've checked all connections) so I wonder if this is a software problem caused by a virus or maybe by Windows updates?
View 19 Replies
View Related
Feb 19, 2011
I turned on the monitor (I had left the system running) and it said that it had recovered from an unexpected shut down. It didn't automatically connect to the wifi, so I opened the connections window to connect to a network and it said "Windows cannot find any networks." I refreshed several times and nothing happened. I clicked the option underneath "Diagnose why windows can't find any networks," and it came back with "This computer does not have a wireless adapter installed and configured." I then opened up the device manager, and under network Adapters, the only thing is "Intel(R) 82566DC-2 Gigabit Network Connection." I checked it out and it says it's working properly, and I believe that this adapter is for when you actually connect a cable directly to the PC.
View 4 Replies
View Related
Oct 26, 2012
My DIR-655 wireless has stopped working after a few years of flawless operation. It still works for wired operation. I was running Firmware 1.21, tried rebooting, resetting to factory, powered off the unit, etc. without success. Decided to Upgrade to the firmware to 135 NA, still no success. I am in British Columbia on Shaw Cable. On the Status Page under Wireless LAN, the Wireless Radio shows "Init failed".
View 3 Replies
View Related
Apr 15, 2011
I have a DIR-825 (B) for over a year now. This morning, the wireless on it suddenly stopped working. Meaning, all my machines not longer seeing the signal from that router. If I hardwire to it, it will work fine. I have check the wireless settings and they all look fine.
View 2 Replies
View Related
Feb 2, 2011
I have a Comcast modem and a DIR-655 router. I finally got them to work together (it took some doing!) and now the router has stopped working with my Roku player and laptop. It still works fine with the desktop that's wired into it.
View 6 Replies
View Related
May 28, 2012
i have a desktop with a wired Ether port, and want to use the DIR-655 to access the wireless LAN used by the rest of my household. this should be possible, right? i've seen discussion of the DIR-655 as a bridge and repeater, but can't figure this one out?
View 1 Replies
View Related
Mar 3, 2013
I built my new computer a while ago & I have went through 3 wireless network adapters already... 2 from d-link that just stopped working after 1-3 months and my current linksys ae3000 disconnects from internet randomly while gaming.I am looking for a new Wireless Network Adapter, or any tips or anything to stop my current problem.
Specs:
Spoiler
HDD: Seagate Barracuda 1TB 7200 RPM 32MB Cache
SSD: SanDisk Extreme 2.5" 120GB SATA III
Mobo: ASUS P8Z68-V PRO/GEN3 LGA 1155
GPU: EVGA SuperClocked GeForce GTX 680 2GB
RAM: G.SKILL Ripjaws Series 12GB (3 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600
CD Drive: LITE-ON DVD Burner - Bulk 24X DVD+R 8X DVD+RW 12X DVD+R DL 24X DVD-R 6X DVD-RW 16X DVD-ROM 48X CD-R 32X CD-RW 48X CD-ROM Black SATA Model iHAS124-04 - OEM
PSU: CORSAIR Enthusiast Series TX850 V2 850W
CPU: Intel Core i7-2700K Sandy Bridge 3.5GHz (3.9GHz Turbo) LGA 1155
CPU Cooler: COOLER MASTER Hyper 212 EVO
OS: Windows 7 Ultimate 64-bit edition
View 3 Replies
View Related
Mar 22, 2013
I was using Remote Desktop between two home computers hard wired through the router and a switch. Now after upgrading to firmware 1.35 I can't get remote desktop to connect. I get an error that I may not have permission, etc. I have the DIR 655 ver A and am running Windows 7 professional on both computers.
View 5 Replies
View Related
Apr 12, 2013
I own a laptop and a desktop, and I use my DIR-600 to connect them both to the internet, using a PPPoE connection. After "repairing" the Desktop (by booting via Windows XP CD) my PC just stopped connecting to the internet. I had rested the router, then configuring it again. Still same issue. Wireless works perfectly. Direct connection.
View 3 Replies
View Related
Jun 29, 2011
My desktop was wirelessly connected to a router. It was working perfect, I did a wired connection from the modem to the desktop and when I tried to get the wireless connection again it has not been possible. When I try network trouble shooting I get DNS server might be unavailable. Been reading around and tried many of the things that I've read but none has worked so far.
View 4 Replies
View Related
Aug 17, 2012
I would like to know if the D-Link DWA-525 Wireless N 150 Desktop Adapter [URL] is compatible with my ASUS P6X58D-E motherboard ?Its a PCI card, and even my mobo had the PCI 2.0 slot, but i happened to see the photo of the card and it seemed to have two gaps in its PCI connector,]
View 8 Replies
View Related
Mar 14, 2013
Region : Hungary
Model : TL-WR740N
Hardware Version : V4.20.0
Firmware Version :
ISP : T-Home
I bought a TP-Link TL-WR740R Router, the setup went smoothly, I could connect to the internet and set up WiFi connection. But after a few hours, I accidentally unplugged the Ethernet cable from the router, and since then, I can't seem to make the router work. (I obviously plugged it back in.) Setup says I have a problem with the WAN connection.I tried rebooting, resting, reconfiguring, cloning the MAC address.The router is sending packages, but receiving none. How could this happen just by unplugging the cable for a second?
View 4 Replies
View Related
Jul 24, 2012
I have a Century Link modem connected to a Linksys router. I have three computers hooked up wireless. I used another computer to hook up with the ethernet cable because that wouldn't work wireless for some reason. A little while after that, the Linksys network stopped working completely(all three computers could not access the internet). Now I can only connect to the internet if I use a ethernet cable from the modem.
View 2 Replies
View Related
Dec 3, 2012
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 rel 33996n
ISP : Verizon Fios
(My router says Version 1.9).Had this router about a month. It works fine. Using it in Wireless mode wpa2 security. Get excellent speeds. HOWEVER> It freqently drops connectivity and fails to allow wireless clients to connect at all. (You can see the SSID via wireless clients, but not connect to it). To restore it, I have to disconnect from Power, wait a moment, then reconnect to power. It recycles and connections are working again with no problems (UNTIL NEXT TIME). Seems to happen every few days.
I checked the web site and I appear to have the most current firmware.I have a Trendnet router on different channels in another part of the house which has never had this problem. I disconnected it to test if it was somehow involved, but the TP-Link router had same symptoms when it (trendnet) was not connected. Our Actiontec Router (VERIZON provides this as base connectin to them serving the Cable TV DVRs also) ) has its wireless disabled and is the DHCP server provider to the home network. DHCP is disabled on the TP Link.
View 14 Replies
View Related
Nov 29, 2011
I have run three computers on my wireless network for a few years now, and have an HP OfficeJet 6500 Wireless printer that has worked seamlessly on all computers. That is, until I secured my router. I had an open wireless connection that I changed to secure (WPA) a couple of weeks ago and have been unable to connect to my printer wirelessly to print. It will print if connected to USB. The first day I was able to enter in my WPA key just fine, but not since. It doesn't appear to be finding my connection. Oddly enough one of our computers (a laptop) is able to print to this printer so I am not sure. All computers are running Windows XP, I believe with SP3. I use a D-link wireless router. I have tried using the HP solutions to no avail and have checked in the documentation that came with the printer.As an aside, I now appear to also have another wireless connection which is a "computer-to-computer" connection, I believe an ad-hoc connection?
View 3 Replies
View Related
Nov 11, 2011
I have been using a d-link router for some time now and since yesterday it has stopped working ( I have an orange 'world' light on all the time) After looking around this site I have tried resetting etc and nothing works. If I plug the ethernet cable into the modem I can get on the internet if I plug the cable into the router then nothing. These are the details I got from the config all when I plugged the ethernet into the router.
View 3 Replies
View Related
Jul 10, 2011
My router suddenly stopped working yesterday and I've tried everything I can think of to fix it. I have one computer wired directly in to it and a few laptops that use wireless connections.The power LED and the internet LED light up, but the status LED and the WLAN LED do nothing. Pushing the factory reset button on the back doesn't seem to do anything.Can't connect to the router site (192.168.0.1) The internet works fine when I plug in to it directly, so its definitely the router.
View 3 Replies
View Related
Dec 6, 2011
I've had the dir655 for about a year now, and no problems at all, until about a week ago. I went into a couple of online games (Bad Company 2 and World of Tanks) and would have a low ping showing in the game, but every 10-15 seconds, especially in areas with a lot of action, I would get large amounts of lag, making the games unplayable.I would be unable to move or keep getting 'teleported' back 20 feet. I looked into it maybe being the servers, steam in the case of bad company, or my internet provider, but regular internet actions are not affected at all. After searching for a while tweaking settings, turning off antivirus and firewalls, it made no difference.I finally today plugged my modem directly into my pc instead of leaving it on wireless, and all the problems go away. All packet tests and connection tests to my router have come back with no errors. Again, I have never had a problem just browsing the web or watching videos, and usually get more speed on speedtest.net than my provider even advertises. I also upgraded the router firmware.I tried going into my router settings and doing all I could (as I understand it) to have exceptions, port forward, and even did the one thing (can't remember what it's called) where you add one ip address that will have no limitations put on it by the router, and none of this has made it work.
View 9 Replies
View Related
Jan 22, 2012
I have a Dlink DIR-615 wireless router that up until a few days ago was working perfectly. Then I had to turn it off at the wall before a storm and it has stopped working. I have tried resetting it with no luck. I am able to get internet try to get onto on my desktop without the router.I have tried to connect to 192.168.0.1 it won't let me. I can't get on there with an internet connection either. As soon as I connect the router the default gateway disappears. [code]
View 5 Replies
View Related
Sep 23, 2012
I tried searching google and Cisco Home Community for this answer, but no luck. Maybe I didn't phrase my search correctly. I have an external drive connected to a mac mini which is shared on the network. When transferring folders to or from that external drive, our internet connection stops working until the transfer finishes, then comes back up. I've tested this in a variety of ways. Any transfer of data from shared folders in any combination of devices causes internet to stop working both on wired and wireless devices until the transfer is done, then they all work again. Router firmware: 1.0.03.
View 9 Replies
View Related
May 2, 2012
can you use a Mini USB WiFi Wireless Adapter LAN Network Card on a desktop computer
View 4 Replies
View Related
Jul 21, 2011
I bought the DIR-655 less than a year ago in Amazon, shipping it to NY. And then I came back to Uruguay. Almost 3 months ago the router stopped working completely and I started to search for support in Uruguay.After calling US support I was told I should contact the local or regional D-Link (which I later found is D-Link LA). And via DLinkLA.com I found the company TELEDATA S.A. url... who does the official support for D-Link in Uruguay. They told me the router couldn't be fixed, and told me DLinkLA, which is based in Chile, would either send me a working one (they also told me the service/warrany was already approved), or send me the money and gave me their contact details.After two weeks of contacting them, trying to get their attention, they finally told me it was not their responsibility because it was bought in the US. And now they don't return my e-mails.
View 5 Replies
View Related
