D-Link DIR-655 :: Just Stopped Working / Showing In Network Pref?
Oct 16, 2011
I was working on the computer and internet just stopped, checked the router and it doesn't show up in air-port pref on my Macbook Pro anymore. It was still on my iPhone, and then a few minutes later disappeared from my iPhones network as well. I've tried hard resetting etc, network name doesn't show up anymore, on ethernet to the modem now but tad uncomfortable sitting on the living room since I have the router and modem in my entertainment center.
All the lights work fine, and it lights up like normal but network went "poof".
Typing in ip of 192.168.0.1 just says google chrome cannot connect to that page. I had to play with my Mac for awhile as it wouldn't connect by ethernet till I figured out I had to uncheck passive FTP from Proxies.
View 4 Replies
ADVERTISEMENT
Sep 10, 2012
The other day I went to a friends house, came back home, booted up my PC, and my wireless network adapter wasn't working. I've tried everything to fix it.It's a D-Link DWA-525 802.11n Wireless PCI netowrk adapter. On device manager it just says 802.11 Wireless LAN Card with a yellow exclamation next to it. And when I check what the error is, it's either error 31 or 52 at different times, depending what I've tried to do to fix it.I tried downloading the driver for it off the D-Link website, nothing happens at all when I install it. I tried taking it out of my computer and plugging it in. I tried enabling it and disabling it on device manager.I noticed one thing, when it's in my computer the green light at the back that says activity next to it isn't on.
View 10 Replies
View Related
Nov 11, 2011
I have been using a d-link router for some time now and since yesterday it has stopped working ( I have an orange 'world' light on all the time) After looking around this site I have tried resetting etc and nothing works. If I plug the ethernet cable into the modem I can get on the internet if I plug the cable into the router then nothing. These are the details I got from the config all when I plugged the ethernet into the router.
View 3 Replies
View Related
Jul 10, 2011
My router suddenly stopped working yesterday and I've tried everything I can think of to fix it. I have one computer wired directly in to it and a few laptops that use wireless connections.The power LED and the internet LED light up, but the status LED and the WLAN LED do nothing. Pushing the factory reset button on the back doesn't seem to do anything.Can't connect to the router site (192.168.0.1) The internet works fine when I plug in to it directly, so its definitely the router.
View 3 Replies
View Related
Oct 26, 2012
My DIR-655 wireless has stopped working after a few years of flawless operation. It still works for wired operation. I was running Firmware 1.21, tried rebooting, resetting to factory, powered off the unit, etc. without success. Decided to Upgrade to the firmware to 135 NA, still no success. I am in British Columbia on Shaw Cable. On the Status Page under Wireless LAN, the Wireless Radio shows "Init failed".
View 3 Replies
View Related
Dec 6, 2011
I've had the dir655 for about a year now, and no problems at all, until about a week ago. I went into a couple of online games (Bad Company 2 and World of Tanks) and would have a low ping showing in the game, but every 10-15 seconds, especially in areas with a lot of action, I would get large amounts of lag, making the games unplayable.I would be unable to move or keep getting 'teleported' back 20 feet. I looked into it maybe being the servers, steam in the case of bad company, or my internet provider, but regular internet actions are not affected at all. After searching for a while tweaking settings, turning off antivirus and firewalls, it made no difference.I finally today plugged my modem directly into my pc instead of leaving it on wireless, and all the problems go away. All packet tests and connection tests to my router have come back with no errors. Again, I have never had a problem just browsing the web or watching videos, and usually get more speed on speedtest.net than my provider even advertises. I also upgraded the router firmware.I tried going into my router settings and doing all I could (as I understand it) to have exceptions, port forward, and even did the one thing (can't remember what it's called) where you add one ip address that will have no limitations put on it by the router, and none of this has made it work.
View 9 Replies
View Related
Jan 22, 2012
I have a Dlink DIR-615 wireless router that up until a few days ago was working perfectly. Then I had to turn it off at the wall before a storm and it has stopped working. I have tried resetting it with no luck. I am able to get internet try to get onto on my desktop without the router.I have tried to connect to 192.168.0.1 it won't let me. I can't get on there with an internet connection either. As soon as I connect the router the default gateway disappears. [code]
View 5 Replies
View Related
Oct 6, 2011
recently my network adapter just stopped working. The wifi signal was really bad so i unplugged it and when i plugged it back in it doesnt even turn on. I've reinstalled the drivers and still it doesn't turn on. In device manager there is a yellow exclamation mark next to it and when i click on properties it says code 10. I used it on my laptop and it turns on but when i plug it in my desktop it doesn't seem to turn on.
View 1 Replies
View Related
Jul 21, 2011
I bought the DIR-655 less than a year ago in Amazon, shipping it to NY. And then I came back to Uruguay. Almost 3 months ago the router stopped working completely and I started to search for support in Uruguay.After calling US support I was told I should contact the local or regional D-Link (which I later found is D-Link LA). And via DLinkLA.com I found the company TELEDATA S.A. url... who does the official support for D-Link in Uruguay. They told me the router couldn't be fixed, and told me DLinkLA, which is based in Chile, would either send me a working one (they also told me the service/warrany was already approved), or send me the money and gave me their contact details.After two weeks of contacting them, trying to get their attention, they finally told me it was not their responsibility because it was bought in the US. And now they don't return my e-mails.
View 5 Replies
View Related
Dec 6, 2011
I have a Dlink Dir-615 router and a Motorola SB6120 Modem. For some reason the router suddenly says it's receiving internet access from the modem. It has worked for several months beforehand. I tried another Dlink modem and got the same results. I have my computer hooked directly to the modem hence the ability to make this post.
View 5 Replies
View Related
Apr 15, 2011
I have a DIR-825 (B) for over a year now. This morning, the wireless on it suddenly stopped working. Meaning, all my machines not longer seeing the signal from that router. If I hardwire to it, it will work fine. I have check the wireless settings and they all look fine.
View 2 Replies
View Related
Feb 2, 2011
I have a Comcast modem and a DIR-655 router. I finally got them to work together (it took some doing!) and now the router has stopped working with my Roku player and laptop. It still works fine with the desktop that's wired into it.
View 6 Replies
View Related
Oct 21, 2011
My DIR-655 stopped working after updating firmware to 3.35. Only power light comes on. port4 flashes for a microsecond when I plug it in. Recovery mode has not done anything. Computer acts like nothing is connected through Ethernet, says "No Cable Connected." Only power light stays on the whole time. I am guessing this thing is broken now. when i go through ipconfig, "no media connected." If not whats a good router under a hundred bucks today, had this router since early 2007.
View 10 Replies
View Related
Dec 24, 2011
I originally bought the 615 router because my Net Talk telephone required it. The first Wi-Fi device I used is my Kindle Touch. I have been able to use the Wi-Fi several times since I received the Kindle, but there have now been two failures to connect. The first time I just unplugged the router power and connections, restarted the modem, and rebooted my computer. The Wi-Fi then worked. Now I am experiencing a failure to connect again.
I have noticed that when I restart my computer I have to connect to the internet directly by pulling the cable from the router and putting it from the modem to the computer. This seems to teach the router what it is supposed to do, because when I reconnect the modem to the router the internet starts to work immediately.I have tried changing the password to wireless internet, but my Kindle still will no longer connect. The router is about two years old. [code]No go to the devices and check to see if you see the new SSID name you gave in the router. I should be listed there. Select it and it should ask you for a password, enter the password you gave in the router. The only problem is that my modem does not exactly say "mixed G and N".
View 1 Replies
View Related
Mar 3, 2011
I was changing the port forwarding configuration when suddenly the router stopped working, and now the "D-Link" light is constantly on, and the power light and the 4 LAN lights are flashing. Nothing worked, resetting, or unplug and plug again in a short time.
I disconnected it for 12 hours, and when I plugged in again, it kinda worked, and the settings where factory defaults, so when I tried to connect it to DSL via PPoE, when ( I believe ) it reboots to accept the changes, it starting flashing again and completely stopped working.
So I waited 12 hours more unplugged, plugged it and it worked, and the setting from 12 hours earlier were still there. But when trying to connect to the DSL it stopped working AGAIN.
Now I don't know what to do. I guess I am going to keep trying connecting with little differences, until something.
I believe it still has warranty but since the is no official service in Uruguay, it isn't economically viable to send it overseas.
I am currently connected directly to the DSL, sharing connection to other computers through a switch and hosting an ad-hoc wireless network, but the performance is terrible and the wireless range is minimal.
View 1 Replies
View Related
Nov 6, 2012
I have had a setup in which my four DCS-930Ls transfer picture every 15 minutes over a Dovado-router connected to a mobile broadband modem. This has worked perfectly until this last night. No pictures are transferred and upon using the test FTP function the status page just says "Testing ...." forever. I've also tested e-mailing picture without success.
View 2 Replies
View Related
Jun 29, 2011
My desktop was wirelessly connected to a router. It was working perfect, I did a wired connection from the modem to the desktop and when I tried to get the wireless connection again it has not been possible. When I try network trouble shooting I get DNS server might be unavailable. Been reading around and tried many of the things that I've read but none has worked so far.
View 4 Replies
View Related
Jun 24, 2011
I recently reinstalled Vista on my Dell laptop.Before that,I could view and open shared files on my XP desktop, although the PC couldn't see the laptop.Now, I can get online, but can't see the PC in Network places.I've ensured both have same workgroup name.I think it may be due to Norton Internet Security,which I've renewed and reinstalled from new disk.But the former one didn't prevent file-sharing, albeit one way,XP to Vista.Before I uninstall Norton again, is there anything else I should have done after Vista reinstall ?
View 1 Replies
View Related
Oct 19, 2011
Sometimes my office network stopped than work lan cable good but network problem more than time same problem.
View 1 Replies
View Related
May 27, 2012
I have a DLink DIR-615 rev. B2 firmware 2.25. A few days ago, I started using Comodo Unite for VPN access with friends and LAN gaming. However, just recently the program stopped working correctly. I have reset my configuration, tried multiple different settings, and nothing at all has remotely worked.
View 3 Replies
View Related
Mar 14, 2013
Region : Hungary
Model : TL-WR740N
Hardware Version : V4.20.0
Firmware Version :
ISP : T-Home
I bought a TP-Link TL-WR740R Router, the setup went smoothly, I could connect to the internet and set up WiFi connection. But after a few hours, I accidentally unplugged the Ethernet cable from the router, and since then, I can't seem to make the router work. (I obviously plugged it back in.) Setup says I have a problem with the WAN connection.I tried rebooting, resting, reconfiguring, cloning the MAC address.The router is sending packages, but receiving none. How could this happen just by unplugging the cable for a second?
View 4 Replies
View Related
Jun 29, 2012
I have install a new driver for the network card but the card stops working?
View 1 Replies
View Related
Jul 24, 2012
I have a Century Link modem connected to a Linksys router. I have three computers hooked up wireless. I used another computer to hook up with the ethernet cable because that wouldn't work wireless for some reason. A little while after that, the Linksys network stopped working completely(all three computers could not access the internet). Now I can only connect to the internet if I use a ethernet cable from the modem.
View 2 Replies
View Related
Nov 18, 2011
I Have a HP dc5000MT desktop. I run an ethernet cable from its network card {Broad NetXtreme Gigabit} to a Westell 327W router{this has worked for the last four years}. My laptop connects to the internet through this router using wireless and for test purposes through the ethernet port. I installed a new network card {Dynex DX-E102 PCI NetworkAdaptor}in the desktop. When i'm enabling either the old or new card through Control Panel, Network Connections, i get the message "acquirin network address,Firewalled".and it never enables. I ran Malwarebytes and no infections were found. I use AVG anti-virus and Internet Explorer.
View 17 Replies
View Related
Nov 29, 2011
I have run three computers on my wireless network for a few years now, and have an HP OfficeJet 6500 Wireless printer that has worked seamlessly on all computers. That is, until I secured my router. I had an open wireless connection that I changed to secure (WPA) a couple of weeks ago and have been unable to connect to my printer wirelessly to print. It will print if connected to USB. The first day I was able to enter in my WPA key just fine, but not since. It doesn't appear to be finding my connection. Oddly enough one of our computers (a laptop) is able to print to this printer so I am not sure. All computers are running Windows XP, I believe with SP3. I use a D-link wireless router. I have tried using the HP solutions to no avail and have checked in the documentation that came with the printer.As an aside, I now appear to also have another wireless connection which is a "computer-to-computer" connection, I believe an ad-hoc connection?
View 3 Replies
View Related
Nov 3, 2011
It may be a coincidence but my Broadcom Network Adapter 802.11g stopped working after trying to fix 'unknown device' in Device Manager (It was working perfectly before this).OS: Windows 7 Starter on 'BenQ Joybook Lite U105'.I tried the Windows Network trouble shooter and it didn't work (saying there may be a problem with the driver. I uninstalled the driver and re-installed it (including a possibly newer one) and it didn't work. Within 'Network Connections" the Broadcom wireless adapter is shown as 'disabled' I R-clicked to enable it, a window popped up saying it was enabled but it still showed as being disabled. My feeling is that something is preventing it from being enabled, logically, I would guess. Also went to 'Component Services' and ether started or restarted everything with the word network on it still no luck..My Google search on an other pc , now on day 3, couldn't find anything. (BTW the 'unknown device' which according to the icon, seems to be the joybook itself, is still not fixed and still listed as 'unknown device').
View 4 Replies
View Related
Sep 23, 2012
I tried searching google and Cisco Home Community for this answer, but no luck. Maybe I didn't phrase my search correctly. I have an external drive connected to a mac mini which is shared on the network. When transferring folders to or from that external drive, our internet connection stops working until the transfer finishes, then comes back up. I've tested this in a variety of ways. Any transfer of data from shared folders in any combination of devices causes internet to stop working both on wired and wireless devices until the transfer is done, then they all work again. Router firmware: 1.0.03.
View 9 Replies
View Related
Jul 2, 2008
I have a new brand dell inspiron 1525 laptop and everytime i boot i get a message "Dell wireless WLAN card wireless network controller stopped working and was closed.
A problem caused the application to stop working correctly.Windows will notify you if a solution is available.I use windows vista premium and dell wireless 1390 802.11g.
View 22 Replies
View Related
Feb 6, 2010
I regularly get this message (but not everytime) when I start up Windows Vista Home Premium 32-bit.
"Dell Wireless WLAN Card Wireless Network Controller stopped working and was closed.a problem caused the application to stop working correctly. Windows will notify you if a solution is available."
Then I get this following message:"Solution Found: Address a problem with your WLAN card.Your WLAN card has stopped working properly. This is a network adapter that allows your computer to connect to a wireless network. To find out if an updated version of your WLAN card is available, contact your device or computer manufacturer."The strange thing is even though I get this message I am still able to connect to the internet via a wireless network. So there is no problem as such it is just annoying to keep getting this message when Windows starts up.I have checked on the DELL Support website and I do have the most up-to-date driver already (Or I think I do).
The message refers to my:
Dell Inspiron 1520, Dell Wireless 1390 WLAN Mini-Card (with driver version 4.170.25.17)
View 16 Replies
View Related
Jan 28, 2012
I record on motion to an external drive using samba. I get around 20MB before it just stops recording (samba full condition signaled). This is a one TB drive with nothing much on it.
View 2 Replies
View Related
Dec 5, 2012
When the front-panel WLAN LED light is solid, it indicates that the wireless segment is ready; it blinks during actual wireless data transmission. This is how it behaved for me until I added some MAC addresses to Advanced > Network Filter. Now it stays solid even during wireless data transmission. Even after a reboot. If not, how do I get the blinking back?
View 14 Replies
View Related
Jun 16, 2012
The other day while I was browsing the internet all of a sudden my internet stopped working. I look down below and try to connect to the network again but it no longer shows my network anymore. I went into the room of my router and it looked fine. All lights were lit up like they should be. I turned on my Laptop to see if it was just a problem with my desktop but it's still not showing my network either.
I have restarted my router and reset it numerous times and it has still yet to show my network. It only seems to work if I connect it to my Laptop with an Ethernet cord. I have two different routers (Both Linksys) and they both do not work.I also have two different wireless adapters (D-Link & Netgear) and they both do not work
View 14 Replies
View Related
May 24, 2011
I've tried changing the settings on my DLink wireless router, resetting it and my cable modem (by unplugging them and plugging them in again), and even restoring my iPod, but I cannot find my home wireless network! Both my iPod and my PC can find other networks, but not my own.My network is WPA-2 only, which my iPod should be able to see. The cipher type is TKIP. My wireless channel is 2.437GHz (channel 6, I can't change it). I even tried resetting my network settings on my ipod, with no luck.My router is a DLink DIR 615 wireless router and my computer is a PC that runs Windows 7. The router is able to connect to the internet; it's just the wireless portion that isn't working.
View 11 Replies
View Related
