D-Link / Netgear - Network Is No Longer Showing
Jun 16, 2012
The other day while I was browsing the internet all of a sudden my internet stopped working. I look down below and try to connect to the network again but it no longer shows my network anymore. I went into the room of my router and it looked fine. All lights were lit up like they should be. I turned on my Laptop to see if it was just a problem with my desktop but it's still not showing my network either.
I have restarted my router and reset it numerous times and it has still yet to show my network. It only seems to work if I connect it to my Laptop with an Ethernet cord. I have two different routers (Both Linksys) and they both do not work.I also have two different wireless adapters (D-Link & Netgear) and they both do not work
View 14 Replies
ADVERTISEMENT
Jun 6, 2011
Just purchased a new Router and set it up. Powered up my laptop and its showing it as an intruder and isn't allowing it to access the net. How do I solve this and allow it to connect? Router is Netgear N300 Wireless Router
View 2 Replies
View Related
Oct 13, 2012
Signed onto pc as admin, logged into router with correct user name and password. No page in the browser based configuration displays the complete information for the page. Menus are missing as are option labels, etc. The last time I accessed the router (about a year ago) I didn't have this problem.
View 3 Replies
View Related
Jun 23, 2012
My NetGear WG111v3 router no longer lights up, so I assume it's broken. Is there a way to hardwire it in through the ethernet in the NetGear modem? It tried already but when I click on the software it just beeps at me and won't open.
View 2 Replies
View Related
May 24, 2011
I've tried changing the settings on my DLink wireless router, resetting it and my cable modem (by unplugging them and plugging them in again), and even restoring my iPod, but I cannot find my home wireless network! Both my iPod and my PC can find other networks, but not my own.My network is WPA-2 only, which my iPod should be able to see. The cipher type is TKIP. My wireless channel is 2.437GHz (channel 6, I can't change it). I even tried resetting my network settings on my ipod, with no luck.My router is a DLink DIR 615 wireless router and my computer is a PC that runs Windows 7. The router is able to connect to the internet; it's just the wireless portion that isn't working.
View 11 Replies
View Related
Oct 16, 2011
I was working on the computer and internet just stopped, checked the router and it doesn't show up in air-port pref on my Macbook Pro anymore. It was still on my iPhone, and then a few minutes later disappeared from my iPhones network as well. I've tried hard resetting etc, network name doesn't show up anymore, on ethernet to the modem now but tad uncomfortable sitting on the living room since I have the router and modem in my entertainment center.
All the lights work fine, and it lights up like normal but network went "poof".
Typing in ip of 192.168.0.1 just says google chrome cannot connect to that page. I had to play with my Mac for awhile as it wouldn't connect by ethernet till I figured out I had to uncheck passive FTP from Proxies.
View 4 Replies
View Related
Feb 5, 2011
my computer is a dell dimension 1100, with a Linksys WMP54G wifi card, running vista home basic.In the wifi thing in the notification area, it shows two wireless networks, One is my normal SSID (Lower Net), and one is "Unidentified network". They are both on one wireless connection (Wireless Network Connection 3). When i try to go on the internet, it says i'm not connected. i tried disconnecting from the unidentified network, but that disconnects me from lower net too.
View 13 Replies
View Related
Sep 2, 2012
I seem to be struggling to connect more than 4 cameras to my (ISP-supplied) modem/router by Netgear CGD24N via WPS. I'm on my 5th camera now (already have 3x 930L and 1x 942L) but the newest 942L just won't connect to the network at the moment and there's definitely no faults here as I swapped cameras today at the local retailer (and got an A3 942L!).I've even tried connecting the camera to my wireless extender (Netgear WN3000RP) but no luck there.
So far it has only worked twice for short periods of time (enough for me to configure the cameras) but since then I can't actually get it working. I've got a couple of spare wireless routers lying around too and should be receiving a DIR-600 soon (from the Netgear promotion in Australia) which could be useful?
View 1 Replies
View Related
Feb 25, 2012
I have had a heck of a time getting this server up and running and it looks like I finally have it, except for one thing. Everything works except for the vpn. I do not have the vpn portion on the router configured since the SBS server will be acting as the vpn host, but maybe I need to configure the vpn elements on this router for it to allow vpn connections in?The other thing that is "off" as the title of this post indicates is that the server is not showing up on the router's attached devices under the correct name. It's showing as some generic WIN-****** nameI am doing this project for a non-profit without compensation and the networking part of it has been a nightmare. So any solution that doesn't entail me reconfiguring the server. Everything else appears to be functioning properly, dhcp, dns, ingoing, outgoing mail and the web interface.
View 5 Replies
View Related
Feb 27, 2012
Changed from D-Link to Netgear router now only one of two computers cannot see the other. Error shows cannot connect to MSHOME network, need administrative approval. Computers are ethernet connected to the router. Have McAffe and both computers are "Trusted" Can do a search with XP and it shows the missing computer but unable to make a connection.
View 5 Replies
View Related
Dec 8, 2012
Had my DIR 615 rev A just fail one day spontaneously; managed to bring it back by reflashing from the emergency room, but now it will not hold setting through a power cycle, other than this it seems to be working well.
View 9 Replies
View Related
Jan 28, 2011
My DIR-655 has been working flawlessly for several months since I bought it. It is connected to Road Runner High Speed Internet from Time Warner. This morning it will not access the Internet. It shows a wireless connection, and I can connect to it via direct wired connection, but no Internet. A direct connection to the Time Warner Cable Modem connects to the Internet just fine. Cycled power on all units, & Time Warner reset the modem. Nothing has fixed the Router.
View 14 Replies
View Related
Oct 30, 2012
I have a Dell Optiplex running XP wired to a Netgear router. My laptop is a Dell Inspiron 1501 running Windows 7. When I got the new router everything programed easily and I could retrieve files from my desktop and print remotely. Sometimes I would have to "refresh" before the laptop would detect the desktop but now it will not detect the desktop or the printer. I suspect that a Microsoft Update did this but just guessing. I went back and deleted the updates that downloaded around the time that this stopped working. I have tried every thing that I can think of to get it back working but can not get it fixed.
View 2 Replies
View Related
Aug 11, 2012
I'm trying to see if I can fix my friend's NAS which apparently has some pretty important data on it that wasn't saved anywhere else. They actually had the Geeksquad look at it and they've come to the same conclusion I have so far, but I figured I would ask the internet before I gave the thing back to them and said Geeksquad was right.
Anyways, they have this 5 drive RAIDed NAS which apparently just stopped showing up on their network. I borrowed it from them to see if I could figure it out. It turns on just fine and my router assigns it an IP address, but the IP address just takes me to a blank LaCie dashboard screen. It's weird because it's clearly running it's web server because it's just a gray background with an empty white box and "(c) LaCie 2010" at the bottom. No content at all.
Additionally, I tried installing the LaCie Network Assistant on my home computer and it says it cannot find any network disks. I've tried the "wake up a device" where I enter the mac address, but that doesn't do anything.
All the lights are solid blue on the front and over all the drives so it doesn't appear a drive has failed or something. Even so, that wouldn't really explain the blank dashboard right?
View 1 Replies
View Related
Dec 21, 2011
Background: This weekend, I lost my internet connection at home. I called my ISP and they sent someone over. The guy rewired the entire house (our ISP is also our tv cable provider), because he felt that our signal was probably weak due to the wiring. Long story short, after two hours of rewiring and fixing the cable outside out house (chewed through by a squirrel), he said the modem's signal was back to normal and left.
When I plugged the router; however, it refused to hold the internet connection for more than a few seconds. On the front panel, the planet-shaped light turned orange, then blue (for a few seconds) and then turned off entirely. I tried another few times and got the same result. At best, it stayed connected for a minute, until I rebooted my computer. The laptops in our house do read the presence of the router, so it's safe to assume that the problem lies with the router's capacity to receive the signal.
View 5 Replies
View Related
Feb 23, 2011
Can I just plug the router into a 110 socket and then press the reset button to clear all stored information?
View 3 Replies
View Related
Jan 5, 2012
Well I was trying to get my D-Link DIR-615 router too run DDWRT so I could use it as a wireless reciever.But things have gone wrong, the wireless controller no longer works. and I'm trying to restore the original factory firmware.(this is a spare router we had sitting around it's not an important asset) it boots up fine with DDWRT firmware the wire functions still work, but I needed the wireless functions.I just can't get the original firmware back.
View 1 Replies
View Related
Apr 11, 2011
I have a wireless network in my home. I reliably get solid connections on our various devices such as the Wii (netflix streaming), a net book, a laptop and Wi-Fi connections on android phones. When I first set up the 930L I thought it was defective because I couldn't get a connection. Until I did it in the same room as the router okay, that worked. But I move 2 rooms over and I no longer connect.
Seriously, I can go a few rooms away and easily stream an HD movie via netflix to my net book. But if I set up the 930L at the exact same location it will not connect. If I move the camera within about 20 feet of the router with only maybe 1 wall between them, it will connect.
At this level of wireless power it is nearly worthless for me. Is my camera defective or are all of them this lower powered?I am running a dlink router, 300N, WPA security. Like I said, I can connect if I'm literally 10 feet away. But any significant distance or anything more than a single wall in between and the router no longer sees the camera. And all other wireless devices have strong, reliable connections all through my house.
View 3 Replies
View Related
Mar 17, 2013
Taking another look at Dview cam today after not touching it for 3 months after initial install.The dcs-2132L can't connect.I can to the 2132L directly... I changed the port as a test.. Port 80 wasn't working originally.
[url]....
View 9 Replies
View Related
Feb 20, 2013
Region : Malaysia
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : V5
ISP : Streamyx
TD-W8951ND V5 No longer have Mac Spoofing support.i just bought this modem since my old one is faulty. and i realize that my modem is V5 my previous modem is V4 and there is Mac Spoofing support there.
View 1 Replies
View Related
Dec 24, 2009
I originally began using my D-Link cameras, two DCS-5300s and a single DCS-6620, with the IP Surveillance software. I see that the software is no longer recommended and may no longer be available. Any explanation for the move to the DView Cam software ? If I were to convert over to DView Cam from IP Surveillance will I lose any functionality or features. Will there be any functionality or features gained ?
View 6 Replies
View Related
Mar 12, 2012
I have been using my wireless (linksys) for years now and just recently my wifi network no longer shows up on any of my devices (laptop, phone, etc). I am able to hard wire into the linksys and my laptop works but when I try to connect wirelessly, I can't even see the wireless network, I am only able to see my neighbors.
View 2 Replies
View Related
Jul 6, 2012
I have a Netgear WNDR4500 running the stock firmware, acting as a router for my home. I also have 2 routers that are flashed with DD-WRT (Linksys WRT54G and Asus WL-520GU) running as client bridges. The Netgear is 192.168.1.1 and the other 2 client bridges are 192.168.1.2 and 192.168.10.3. The Netgear router is performing DHCP giving addresses from 192.168.10.100 to 192.168.10.254. I have numerous machines connected to the Netgear, wirelessly and wired, and numerous machines wired to each client bridge. All machines have IP addresses that are 192.168.10.100, 192.168.10.101, 192.168.10.102, etc... Everything is working fine, but I have one question: When I access the Netgear router, it shows the client bridges as clients, machines that are wired and wireless to the Netgear router are listed as clients, but the client list does not show any clients that are connected to the client bridges. I assumed that since the router is performing DHCP that all clients would show up.
View 2 Replies
View Related
Oct 24, 2011
I work next to someone who has been complaining constantly about how his computer will give him some kind of "Access is Denied" error on one of his network drives almost every time he uses it. Other network drives on the same server work. Because it can be fixed by rebooting, the IT person has filed it as low priority / given up on fixing it but I would really like to shut him up but I can't find the answer in google. His computer is Windows 2000 SP4 and the server is Windows NT 4.0.
Edit: It happened again and I was able to get the actual error message. "H:DIST is not accessible The specified network name is no longer available"
View 7 Replies
View Related
Jul 3, 2012
When I am viewing live recorded video through d-viewcam I can hear the audio. I currently have 2 camera recording 24/7. When I go to playback to play a certain clip, there is no sound at all. When I save a clip and click export audio, still no sound.
View 4 Replies
View Related
Apr 9, 2013
Region : Others
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.13.9 Build 120201 Rel.54965n
We are trying to use a TL-WR941ND purchased about a month ago, but it keeps hanging, usually within a day or so of operation.To be clear: by "hanging" I mean the device stops providing wireless services (its SSID is no longer visible in WiFi clients) and becomes nonresponsive to pings or control access attempts (via settings web page) from the internal network connections.The device is used in a very simple scenario, where it's being employed as a simple access point, not as a router. As such, the device's configuration is as follows:
* WAN interface is configured with a dummy static IP (10.10.10.10/24) with gateway and DNS set to the internal IP address of the actual routing device connected to the external world.
* LAN interface is configured with an IP address inside the actual internal IP subnet (192.168.1.0/24).
* DHCP is also disabled as this service is already provided.
* Wireless settings: radio enabled, SSID broadcast enabled, WDS disabled, 11bgn mixed mode, auto channel width, max TX rate, channel 7 (manually set). Using WPA-PSK security.
Rest of the settings are unchanged from their default values, as the device isn't being used as an IP router by any client - just as a WiFi/Ethernet layer 2 bridge. We're using what appears to be TP-Link's latest stock firmware for the device.The settings described above appear to provide the connectivity required by the WiFi clients. However, the device continuously hangs within a day or so of operation, requiring someone to physically attend to the device and cold-restarting it (disconnecting it from power and reconnecting it) to regain an operational state.
After performing a cold restart, the system log shows nothing beyond the startup entries: "System started" entry followed by security info entries regarding enabled protocols. Then the device appears to work well for a while, until it hangs again, forcing again someone to attend to the device, etc.
View 6 Replies
View Related
Jul 20, 2011
How to solve this error in between windows 7(Host) & Windows server 2003(Guest).
View 2 Replies
View Related
Aug 19, 2012
There are 2 locations to choose from. One location requires me to run longer CAT6 cables. 7 of them. The other location requires me to run a longer RG6 cable. (the CAT6 runs would then be about the shortest they could get)So, I guess I need to know which can handle running parallel with power cables better, 25feet of RG6 or CAT6?The parallel with power cable is only for about 6-8 feet, but that's already more than it should be for CAT6.
View 4 Replies
View Related
Oct 9, 2012
I have a 3COM 3CRUS2475 24 Port PoE Switcher that I connect a number of Crestron control units to.All of a sudden yesterday I could no longer see the network on any device including Ipads, Laptops etc.I have rebooted several times and restarted all of the access points around the house but still cannot see the network. I have also connected a WAP directly to the Switch with a new LAN and still nothing.
View 1 Replies
View Related
Sep 27, 2012
My laptop all of a sudden can't connect to my wireless internet connection and also seem unable to find any other wireless network but mine.I recently moved to a new flat, but brought my old modem/router with me (Scientific Atlanta 2434) and use the same ISP. Last week everything worked as a charm, but at the new location my laptop won't connect to my network, though I can connect to it through my mobile phone. My laptop only seem to find my own network ("Fidel") but with my mobile I can pick up 10-15 different networks from my flat. Connecting my laptop to the modem with a cable works all good. I tried to remove "Fidel" from my networks and added it again, typing wrong password gives a message saying "wrong network key" so my laptop and the modem seem to shake hands at least. Yesterday when trying I actually got connected, but the connection died after a few minutes and I wasn't able to connect again.Windows device manager display no errors nor conflicts around the ethernet controller or network adapter. Have tried to update the drivers through the device manager as well but it says they are up to date.Windows version is Windows 7 Home Premium.Don't know if my ISP uploaded new firmware to my modem when I connected it in my new flat, but on the other hand I can't see why this would affect my laptop's ability to pick up other networks in my house? [code]
View 4 Replies
View Related
Feb 28, 2012
I have Dell machine with Win Xp3 loaded, on my local network (and other computers). I set NIC card "Link Speed & Duplex" to autosense & make direct connection to my modem and works ok.When I plug into the network router I get the 'Cable is unplugged' and no Internet connection.I can change the "Link Speed & Duplex" to 10Mbps/Full Duplex and get intermitten connection. Also when I copy a file from Mapped drive I get "Cannot copy xxx - The specified network name is no longer available".
1. the NIC software is recently updated PRO/100 Adapter NDIS 5.1 driver
2. Although Microsoft has suggested Symantec < ver 4 has had an endpoint problem, I have 10.1.6.6000.
3. TCP/IP Properties are on automatic like the other computers.
View 3 Replies
View Related
Jan 19, 2012
I can no longer add user permissions to a network C: drive - I get an access denied message. What could have happened?
View 6 Replies
View Related
Nov 24, 2012
I have a Dell laptop running Windows 7. The problem is that every single time I try to connect to any wireless network, I get a message that says "Connecting to the network is taking longer than usual."The network almost always connects eventually (about 2 minutes), and once connected there doesn't seem to be any other problem.This has been going on for about 2.5 months. It began shortly after I restored the laptop to factory default.
View 11 Replies
View Related
