D-Link DIR-615 :: Wireless Controller No Longer Works
Jan 5, 2012
Well I was trying to get my D-Link DIR-615 router too run DDWRT so I could use it as a wireless reciever.But things have gone wrong, the wireless controller no longer works. and I'm trying to restore the original factory firmware.(this is a spare router we had sitting around it's not an important asset) it boots up fine with DDWRT firmware the wire functions still work, but I needed the wireless functions.I just can't get the original firmware back.
View 1 Replies
ADVERTISEMENT
May 7, 2011
Acer Aspire 4520 Wireless network no longer works.
The light on keyboard is lit up but when pressed, it says No Device.
Went out a long time ago and I quit using the laptop. Borrowed external adapter which works.
No updates found for driver.
View 8 Replies
View Related
Jan 6, 2013
I have an E1200 model 1 router. I've owned it for over a year and it's given me no problems until now...Hardwired ethernet connections work fine, but the wifi no longer works consistently. I have several wireless-N wifi devices that either cannot connect to the router at all (they present an error message), or do connect but will not load anything over the connection, or will load web pages very very slowly and then suddenly drop the connection.When I go to the DCHP client table, I see all of my ethernet connections but it does not show any wifi devices, even if the WiFi device is showing a connection to the router.The wifi connection is secured via WPA2 Personal.I have tried changing channels to one that was not congested with any other nearby routers. I have also tried a 30-30-30 factory reset. I am updated to the latest firmware version (1.0.03). I am sure I am entering the correct pass phrase to connect over WPA2. All of my wifi devices are confirmed to be wireless-n, not g or b.
View 7 Replies
View Related
Jul 16, 2012
Basically, I rebuilt my network over the weekend, to include a subnet, and can no longer connect my desktop to the remote PC. My old router was reset to defaults and re-configured. My PC has been wiped, reinstalled, and fully updated.The error I receive is "Remote Desktop can't connect to the remote computer for one of these reasons: etc" I've only seen this error in the past when the PC I connect to was powered down. I have confirmed that everything is still set up properly on the PC I'm trying to connect to via an associate, and it is not powered down.
Old setup:
[My Win7 PC] ---- [old router] ---- [modem] --- [internet] ---- [Remote PC (Win 7)]
...............................| | |
.........................other local PCs
New setup:
[My Win7 PC] ---- [old router] ---- [new router] ---- [modem] --- [internet] ---- [Remote PC (Win 7)]
.........................................................| | |
...................................................other local PCs
1. I went into Windows firewall to allow Remote Desktop through, but it looks like that only needs to be set for the PC I'm trying to connect to. (Yes/No?)
2. I've forwarded port 3389 from the old router to my PC.
3. I haven't done anything yet to the new router, because I really can't tell if I'm doing the right things. The very first time I connected to the remote PC, it went right through, and I didn't have to change anything in the old router (I think - it's been awhile). I really don't know where to go from here, and it looks like the setup options I've found in the forum so far (static IP, port forwarding, Windows firewall changes, etc.) leave me with more security risks than I had on the old network, and there seem to be some conflicting opinions about the setup process.
View 2 Replies
View Related
Sep 15, 2011
Two months ago I installed a WLC5508 with sw r7.0.116.0 and we installed 8 AP1142 as a start.
10 days the customer calls and says that the wlc logs error messages that says there is an IP-conflict with the management-interface. The conflict source is its own ip-adress!!! He reboots the WLC but the error message keeps coming. After a short while he notices that there are No APs on the WLC...!!!...
After some discussion I suggested that he should disconnect one of the two gig-ports of the WLC (LAG was enabled and in use). He did so and rebooted the WLC for good measure ... The IP-conflict disappeared but still no APs.....
In the DHCP-server (MS Win2003 server), in the AP-scope we also see that the "leased adresses" fills up with "BAD_IP_ADDRESS" (or the sort ... :-/ )
The setup is like this:
- WLC5508 running r7.0.116.0
- WLC has LAG activated and is connected to two different Cat3750G that are stacked
- The management if of the WLC is on the same subnet as the AP1142s, no other hosts on this subnet
- WLC management interface on own subnet as the only host (+ def gwy...)
- APs on their own subnet, no other hosts
- When the APs gets a IP-adress it is possible to ping them from the WLC!
- All VLANs/interfaces on the WLC is tagged, ie a "pure" trunk between WLC and 3750-stack
- Option 43 configured on the AP-scope
- All APs is connected via Power-injector (PWR-INJ4)
WLC5508 => LAG => 2x Cat3750G => TRUNK => Cat2960 with 1x AP1142 => TRUNK => Cat2960 with 6x AP1142
What we have done so far:
- Made sure the port-channel on the 3750-stack was configured: port-channel load-balance src-dest-ip
- Physically disonnected on port of the WLC
- Do "shutdown"on port gig-ports on the 3750-stack and "no shut" on only the one that is still physically connected to WLC
- Do "shutdown" on all AP-ports in the 2960-switches. Clear the lease-pool of the DHCP-server, Deactivate scope, Reactivate Scope and finally "no shut" on all AP-ports
Nothing worked, still no APs on the WLC.
I the connected my PC to the consloe of an AP that was easily accessible and powercycled it. The output can be seen below, the most peculiar was the line : " *Mar 1 00:15:53.351: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination"
1. It worked initially but after the ip-address confilct and reboot of WLC no APs associate to the WLC. Why??
2. The error message on the AP console: "*Mar 1 00:15:53.351: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination" What does this mean?
3. Since the AP gets an IP-address an it is possible to ping WLC -> AP, is there some freakish ogre in the Cat2960 that eats up the CAPWAP-packets??
View 8 Replies
View Related
Aug 9, 2012
I've been having an issue with my internet connection. I have AT&T Uverse high speed internet, complete with the Motorola NVG510 ADSL modem. For the past couple weeks, my download speeds have gone from 1.0 MB/s to < 100 KB/s up to 400 KB/s if I'm lucky.I used to be able to download files and watch videos at the same time with very little trouble, but now I only have enough bandwidth to either do one or the other without causing any problems. I thought my ISP had throttled my bandwidth, but I've run the Glasnost tests at url... and it came back as fine.It may not mean anything, but I should note that a few weeks ago, we had storms move through the area and lightning struck our house. It ended up shocking my mom through the USB mouse while she was using my computer, it blew out one of my computer speakers, and I believe it's the reason why the ethernet port on my motherboard no longer works.
View 13 Replies
View Related
Aug 16, 2011
the name of my wifi network changed and I do not know why, therefore the password for the former name will not work with the new network name
View 1 Replies
View Related
May 27, 2012
I have recently changed a couple of our companys office routers over from a netgear vpn router to this, all has gone well with the cisco router providing much better speed and reliablilty... But....
I have one little problem, at one of our offices they have a brother printer that has a scanner built in, since this change over the scanner does not seem to want to work,
as far as i can guess the router is blocking communication to the scanner, printing is working fine. is there anything that I need to enable or add to the settings on the cisco to get this working? I believe that the printer is using some kind of multicast to connect to the PC's
View 1 Replies
View Related
Feb 20, 2013
Region : Malaysia
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : V5
ISP : Streamyx
TD-W8951ND V5 No longer have Mac Spoofing support.i just bought this modem since my old one is faulty. and i realize that my modem is V5 my previous modem is V4 and there is Mac Spoofing support there.
View 1 Replies
View Related
Apr 9, 2013
Region : Others
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.13.9 Build 120201 Rel.54965n
We are trying to use a TL-WR941ND purchased about a month ago, but it keeps hanging, usually within a day or so of operation.To be clear: by "hanging" I mean the device stops providing wireless services (its SSID is no longer visible in WiFi clients) and becomes nonresponsive to pings or control access attempts (via settings web page) from the internal network connections.The device is used in a very simple scenario, where it's being employed as a simple access point, not as a router. As such, the device's configuration is as follows:
* WAN interface is configured with a dummy static IP (10.10.10.10/24) with gateway and DNS set to the internal IP address of the actual routing device connected to the external world.
* LAN interface is configured with an IP address inside the actual internal IP subnet (192.168.1.0/24).
* DHCP is also disabled as this service is already provided.
* Wireless settings: radio enabled, SSID broadcast enabled, WDS disabled, 11bgn mixed mode, auto channel width, max TX rate, channel 7 (manually set). Using WPA-PSK security.
Rest of the settings are unchanged from their default values, as the device isn't being used as an IP router by any client - just as a WiFi/Ethernet layer 2 bridge. We're using what appears to be TP-Link's latest stock firmware for the device.The settings described above appear to provide the connectivity required by the WiFi clients. However, the device continuously hangs within a day or so of operation, requiring someone to physically attend to the device and cold-restarting it (disconnecting it from power and reconnecting it) to regain an operational state.
After performing a cold restart, the system log shows nothing beyond the startup entries: "System started" entry followed by security info entries regarding enabled protocols. Then the device appears to work well for a while, until it hangs again, forcing again someone to attend to the device, etc.
View 6 Replies
View Related
Apr 12, 2013
Region : Portugal
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :
Two week ago I bought the TD-W8970 ADSL router model. Im using a canon pixma IP4700 printer connected to the router USB print server port and everything is working without any issues if I just look to the router functionalities.
However since that Ive installed TP-LINK USB Printer Controller, my both computers (desktop with windows 7 and laptop with windows 8) are getting very often some BSOD.
I was editing all files automatically generated by windows on this cases and if seems that the cause of this issue is the file TplinkUDSMBus.sys (installed by USB Printer Controller).
To check the impact of this, Ive uninstalled the TP-LINK USB Printer Controller software from my laptop and I dont have any BSOD since 5 days ago. In the desktop Im still have the same issue.
The router print server is a nice functionality and I really want to use it.
View 1 Replies
View Related
Nov 17, 2011
I recently changed internet provider and rented a D-Link N 300 Router. On most days everything works well. However on some days the internet connection on my new laptop that has Intel Centrino Wireless-N 130 network adapter get really terrible (usually on Friday and Saturday). At first I thought that the problem was with provider, but now I find out that my old laptop that does not support 802.11n (only 802.11g) has excellent internet connection (at the same time when the new laptop struggles).
How can I troubleshoot what is causing this problem - the laptop network adapter or the router? Is there some setting for network adapter to force using 802.11g?
My laptop is running Windows 7, if that matters.
View 1 Replies
View Related
Aug 11, 2011
Since the blackout beginning of this week from dlink I had to reset my camera totally to operate it again. works now again with iphone and with mydlink. But it only works as long it is connected via lan cable to my router. I accessed the set up (via ipaddress) and entered the router details to the setup but as soon I disconnect from lan it does not work anymore. What did I oversee.
MAC OS X
Airport extreme
View 1 Replies
View Related
Apr 20, 2013
problem started a few months ago. wireless kept crashing. tracked it down to seeing it crash when certain Win7 Dell laptop tried to connect. (Laptop is company owned with standard type of corporate AD authentication and image) my wireless setting use WPA2 personal with AES encryption. use both N & G, auto rate and scan.any time this laptop connected the wireless crashed, other devices didn't show SSID (both main and guest)But wired connection continued to work fine.
View 1 Replies
View Related
Apr 28, 2013
Region : Others
Model : TD-W8968
Hardware Version : V1
Firmware Version :
I have a problem in the model TD-W8968 of modem.Wireless abruptly stopped Even works must turn off the modem Malk happens sometimes 3 to 5 times
View 1 Replies
View Related
Mar 3, 2013
Region : India
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : 4.0
ISP : BSNL
i have bought TP-Link W895IND and frequently the WIFI is not working. Everytime i have to active and deactive. Now since last one day it totaly stoped working . WIFE icon is glowing continously without flickering.
View 3 Replies
View Related
Jan 2, 2013
Region : Poland
Model : TL-WR941ND
Hardware Version : V3
Firmware Version :
ISP :
I have a problem with files sharing via wi-fi. I can not share files over the network using wi-fi connections. While the network is the cable connection sharing is available. The network also acts as one computer is connected by a cable to the router and the other via wifi. But if the two computers are working through wifi network does not work. Are there any settings in the router, which can cause blocking calls via wifi?
View 1 Replies
View Related
Dec 8, 2012
Had my DIR 615 rev A just fail one day spontaneously; managed to bring it back by reflashing from the emergency room, but now it will not hold setting through a power cycle, other than this it seems to be working well.
View 9 Replies
View Related
Jan 28, 2011
My DIR-655 has been working flawlessly for several months since I bought it. It is connected to Road Runner High Speed Internet from Time Warner. This morning it will not access the Internet. It shows a wireless connection, and I can connect to it via direct wired connection, but no Internet. A direct connection to the Time Warner Cable Modem connects to the Internet just fine. Cycled power on all units, & Time Warner reset the modem. Nothing has fixed the Router.
View 14 Replies
View Related
Jun 16, 2012
The other day while I was browsing the internet all of a sudden my internet stopped working. I look down below and try to connect to the network again but it no longer shows my network anymore. I went into the room of my router and it looked fine. All lights were lit up like they should be. I turned on my Laptop to see if it was just a problem with my desktop but it's still not showing my network either.
I have restarted my router and reset it numerous times and it has still yet to show my network. It only seems to work if I connect it to my Laptop with an Ethernet cord. I have two different routers (Both Linksys) and they both do not work.I also have two different wireless adapters (D-Link & Netgear) and they both do not work
View 14 Replies
View Related
Dec 21, 2011
Background: This weekend, I lost my internet connection at home. I called my ISP and they sent someone over. The guy rewired the entire house (our ISP is also our tv cable provider), because he felt that our signal was probably weak due to the wiring. Long story short, after two hours of rewiring and fixing the cable outside out house (chewed through by a squirrel), he said the modem's signal was back to normal and left.
When I plugged the router; however, it refused to hold the internet connection for more than a few seconds. On the front panel, the planet-shaped light turned orange, then blue (for a few seconds) and then turned off entirely. I tried another few times and got the same result. At best, it stayed connected for a minute, until I rebooted my computer. The laptops in our house do read the presence of the router, so it's safe to assume that the problem lies with the router's capacity to receive the signal.
View 5 Replies
View Related
Feb 23, 2011
Can I just plug the router into a 110 socket and then press the reset button to clear all stored information?
View 3 Replies
View Related
Apr 11, 2011
I have a wireless network in my home. I reliably get solid connections on our various devices such as the Wii (netflix streaming), a net book, a laptop and Wi-Fi connections on android phones. When I first set up the 930L I thought it was defective because I couldn't get a connection. Until I did it in the same room as the router okay, that worked. But I move 2 rooms over and I no longer connect.
Seriously, I can go a few rooms away and easily stream an HD movie via netflix to my net book. But if I set up the 930L at the exact same location it will not connect. If I move the camera within about 20 feet of the router with only maybe 1 wall between them, it will connect.
At this level of wireless power it is nearly worthless for me. Is my camera defective or are all of them this lower powered?I am running a dlink router, 300N, WPA security. Like I said, I can connect if I'm literally 10 feet away. But any significant distance or anything more than a single wall in between and the router no longer sees the camera. And all other wireless devices have strong, reliable connections all through my house.
View 3 Replies
View Related
Mar 17, 2013
Taking another look at Dview cam today after not touching it for 3 months after initial install.The dcs-2132L can't connect.I can to the 2132L directly... I changed the port as a test.. Port 80 wasn't working originally.
[url]....
View 9 Replies
View Related
Dec 24, 2009
I originally began using my D-Link cameras, two DCS-5300s and a single DCS-6620, with the IP Surveillance software. I see that the software is no longer recommended and may no longer be available. Any explanation for the move to the DView Cam software ? If I were to convert over to DView Cam from IP Surveillance will I lose any functionality or features. Will there be any functionality or features gained ?
View 6 Replies
View Related
Apr 1, 2012
I'm trying to use 1142 APs with a 2504 Wireless Controller through a D-Link 48PT GBIT XSTACK SWITCH (DLI-DGS-3120-48PC/SI).At any rate, the 1142 AP joins with the wireless controller ONLY when I attach it directly to the controller. When connected directly to the controller the AP functions normally and all is well. When I attach it through the D-Link switch, the AP flashs green several times, indicating that it can't find the controller. I suspect that there's some setting on the D-Link switch that's preventing the AP from seeing the controller.
View 6 Replies
View Related
Apr 6, 2011
this computer was working on this router no problem. computer crashed and noiw computer is fine i connected it to my cable from ny desk top comutyer and works fine. It just cannot hook up to the wireless connection?
View 1 Replies
View Related
Jul 3, 2012
When I am viewing live recorded video through d-viewcam I can hear the audio. I currently have 2 camera recording 24/7. When I go to playback to play a certain clip, there is no sound at all. When I save a clip and click export audio, still no sound.
View 4 Replies
View Related
Nov 8, 2012
Region : Spain
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
I'm trying to install the USB Printer Controller software in Windows 8 Professional x64 but I can't. Seems that the software is not compatible because I get an error window "Control center installation is imcomplete! Please reinstall again."I'm installing the official version of my download page [URL]Is there any solution to use the print server in Windows 8?
View 7 Replies
View Related
Dec 13, 2012
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : COX
Trying to set up my Samsung ML-1430 printer using a Mac OS 10.6.8. Downloaded and installed the TP-Link_UDS_Printer_Controller. The printer controller found the printer and and it is now connected as the "Auto-Connected Printer" but it does not show anywhere to be selected so I can print to it. Tech support suggested uninstalling and reinstalling the software which I did. Still no option to print to it.
View 10 Replies
View Related
Feb 22, 2013
Region : Others
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 1.8
ISP :
Region : Israel
Model : TL-WR1043ND
Hardware Version (On the back cover): V1.8
From web interface:
Firmware Version:3.13.4 Build 110429 Rel.36959n
Hardware Version:WR1043ND v1 00000000
ISP : Free
1. about USB Printer Controller
I connect my printer HP office jet 5610 All in one, his drivers installed on my computer (windows 7 ultimate, 32 bit). Irun the software "USB Printer Controller" and i didn't seeing anything. Can not click on any button. BTW, i changed the IP range from 192.168.1.1 to 10.0.0.100-10.0.0.139 and my router web interface at 10.0.0.140, if it's changing something.
2. About upgrade the router's firmware, it's safe that I'll upgrading it?
The last version : TL-WR1043ND_V1_120405
View 1 Replies
View Related
Mar 24, 2013
I have a DIR-615 H/W ver C1.Suddenly everything stopped working. The D-Link light is green and the power light is amber, no other light is up (LAN or Internet).I've try to do a reset, no effect.Can't connect to the router even with a LAN cable (LAN lights stays dead with a working cable and computer plug-in).
View 3 Replies
View Related
Mar 21, 2011
I just bought a "DLink Xtreme N Gigabit Router DIR-655" I configured it correctly. It works well for the wireless connection but my Lan connection (wired connection) does not work. The Lan computer connects to the router but cannot access the internet. All of my machines work OK with a Netgear G router, including the Lan computer.
View 9 Replies
View Related
