Region : India
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : 4.0
ISP : BSNL
i have bought TP-Link W895IND and frequently the WIFI is not working. Everytime i have to active and deactive. Now since last one day it totaly stoped working . WIFE icon is glowing continously without flickering.
Region : Others
Model : TD-W8968
Hardware Version : V1
Firmware Version :
I have a problem in the model TD-W8968 of modem.Wireless abruptly stopped Even works must turn off the modem Malk happens sometimes 3 to 5 times
Region : India
Model : TD-W8151N
Hardware Version : V3
Firmware Version : 120530
ISP : BSNL
Net is working smoothly from LAN, but no success on wifi. Over wi-fi, I can connect to router but cannot access net.
Model : TD-W8951ND
Hardware Version : V3
Firmware Version :
ISP : BSNL DATAONE
my tablet show wifi status connected ... signal quality... but cant access internet ...
Region : UnitedStates
Model : TD-W8968
Hardware Version : Not Clear
Firmware Version : eranet
ISP : eranet
I don't know how to set my mobilephone wifi.It's made by HUAWEI.Then it cost me a lot.Who can tell me how to set it?
Region : NewZealand
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111130 Rel.56405n
ISP :
Just installed my new 8960 and it's working fine. However, I'd like to disable admin access from wireless, and only have that available via the LAN. I can't find anything that looks like it'll do that in any of the setup pages, is it possible? All previous wireless routers I've had have been able to do this.
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :
I have an unused TD-W8151N. I also have a smart TV that requires a wired connection, with no way of getting a wire to it.
Can I configure my spare TD-W8151N as a client of the existing WiFi network and connect the TV in to the TD-W8151N with a cable?
Region : Canada
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 120608
ISP : Distributel
I've just installed this router today, connected physically 2 PCs, a PS3 and a VoIP and everything works fine !
The problem is with the WIFI connection ! my devices see the WIFI network, they connect, but I cannot connect to the internet ...
What settings Should I turn on/off or any config I should tweak ?
Region : Italy
Model : TD-W8960N
Hardware Version : V4
Firmware Version : 67406
ISP :
I have problem on router td-w8960n v4 internet speed download is limited a 4 mb in device android e ios wifi connected for test i use application speedtest.net on ipad 3 and samsung galaxy s
Region : Poland
Model : TL-WR941ND
Hardware Version : V3
Firmware Version :
ISP :
I have a problem with files sharing via wi-fi. I can not share files over the network using wi-fi connections. While the network is the cable connection sharing is available. The network also acts as one computer is connected by a cable to the router and the other via wifi. But if the two computers are working through wifi network does not work. Are there any settings in the router, which can cause blocking calls via wifi?
815 is setup & works computer is connected to wifi but I can not surf the net I am using a Amped UA600 usb adapter I have no idea why I still not not surf the net?
View 1 Replies View RelatedI need to reset my wireless adapter frequently Realtek RTL8188CE wireless Lan 802.11n PCI-E NIC after coming out of sleep. I am using WRT-120 router.
View 2 Replies View Relatedsince getting a DIR-655, and I've had random loss of wireless access at least once a day, sometimes 2-3 times a day.While browsing around the settings looking for a way to increase the DHCP lease times I noticed the expiration times were way in the past. Like January 1970 or some such. Then I looked around and saw that date/time for the router was wrong. ("Current Router Time"). So i set up Enable NTP Server (Tools->Time->AUTOMATIC TIME CONFIGURATION).Ever since doing that I haven't had a single loss of wireless connectivity. Rock solid. For weeks now.
View 4 Replies View RelatedSome of you may remember my name from the PS3 posts I had a while back. I completely abandoned the PS3/internet connectivity issues due to it going unsolved for about a year now, I just moved to a new house recently. I can understand that it will take a bit for the family to set things up like reliable internet connectivity and what-not. But perhaps there is something that I can do relatively quickly to fix this. Perhaps it is problematic software on my computer? Here's what is happening: The internet disconnects. A lot. Sometimes it's once per 7-minute YouTube video, and just recently it was a record-breaking sixteen times within 20 minutes. I read some things about it being a problem with Adobe Flash player, because most disconnects happen during YouTube videos, but I can't get an update for it... the internet does not co-operate.
View 19 Replies View RelatedRegion : India
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3.14.2 Build 120822 Rel.40902n
ISP : Aircel (chennai, India)
Recently I bought a TP-Link 3G portable battery powered router ( model no: TL-MR3040).After connecting I get this status: please see picture ( file name 1)
1.jpg: My problems are: I cant find Aircel Network provider(Chennai , India) in the Mobile ISP list, As you can see the second picture below I can see all network providers except Aircel Network Provider : Please see the picture 2 ( file name is 2)
2.jpg and frequently disconnecting and very very poor Wireless coverage (less than 10 feet) I have sent many mails to TP-Link technical support team. I didnt get a single reply from them.
Region : Portugal
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :
Two week ago I bought the TD-W8970 ADSL router model. Im using a canon pixma IP4700 printer connected to the router USB print server port and everything is working without any issues if I just look to the router functionalities.
However since that Ive installed TP-LINK USB Printer Controller, my both computers (desktop with windows 7 and laptop with windows 8) are getting very often some BSOD.
I was editing all files automatically generated by windows on this cases and if seems that the cause of this issue is the file TplinkUDSMBus.sys (installed by USB Printer Controller).
To check the impact of this, Ive uninstalled the TP-LINK USB Printer Controller software from my laptop and I dont have any BSOD since 5 days ago. In the desktop Im still have the same issue.
The router print server is a nice functionality and I really want to use it.
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : latest
ISP : french orange
I am trying to set up port forwarding on this router but it seems I need to use virtual servers but in all the guides there is a menu for this under the advance settings nat menu.I do not have that option, I have downloaded the latest firmware but still nothing.
Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225
ISP : Rogers
Ever since upgrading my firmware from 120426 to the latest(121225), one of my computer(windows xp, TP-link Nano) is frequently losing internet connectivity.I purchased the router a month ago and firmware 120426 was the version that came installed. The router would stop working about 3-4 times a week, requiring me to reboot it. Because of this I did some research online and found out about version 121225 which supposedly should improve performance and stability. After the firmware upgrade today I noticed that one of my computer is having a lot of trouble maintaining internet connectivity for more than 30 minutes. When checking wireless connectivity it would say that I am connected and that the signal strength is excellent. I'm also able to ping 8.8.8.8 but not www.google.com(I've tried ipconfig /flushdns and it doesn't solve the problem). I also have trouble accessing or pinging the router(192.168.0.1) with this computer.
I have been having trouble with my net for sometime now, TWC (time warner cable) guy came to my house to investigate it, said nothing was wrong with the modem but was in fact the doing of the router.
I asked him to take a look at it but he stated he was not allowed to and would not take a look. The main problem is that it mostly goes down when were gaming the net will randomly shut off, sometimes it comes right back, but usually we have to restart the whole thing in order to get net back. It has been known to go off even while were just searching the web.
Main info i can provide is..
Net speed - 20meg down 2 up
Router - D-Link Xtreme Gigabit Router (DIR-655) Wireless N300, USB SharePort, Gigabit
Hardware version - A4
Firmware version - 1.35A
Some of my configuration is I have shut off the wireless portion to turn it into a wired router, (it was still doing this while is was wireless i just shut off the wireless portion today), I also turned mac address filtering on and add the 3 pc's to the mac address and give out the internet that way.
The way its hooked up is cable line/modem/router/then pc1/ pc2/ pc3 connect into router. Only pc 1 and pc 2 use it for gaming. pc3 is just for web surfing.
It really sucks to be playing a game and be doing well or on the verge of a comeback to then have your game freeze because you lost net and then ruined the game for the rest of your team. I'm just tired of dealing with it.
lost wireless to all wireless devices (laptop, iPhone and iPad). Still have hard wired ethernet internet access from desktop. Tried resetting router, powering off router, resetting and powering off cable modem. Nothing works. Lights on router all on.
View 1 Replies View RelatedRegion : Australia
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :
Im having issues setting up port forwarding with my Synology NAS.
My house is all connected via network cable, going to a main 24-port switch, which is connected to a Modem/Router (TP-LINK in this case). I can access the NAS from anywhere on my home network, send and receive is fine. I previously used a Billion modem/router in the same config and it all worked fine.
The problem is that when going through the Synology setup, it fails to see the tp-link. So therefore I cannot run its port forwarding program to setup all my ports. Which in turn the NAS can't access the internet. I have started going through the port-forward setting on the router interface, and manually entered the ports - i realized that I'm limited to the number of ports i'm allowed to open! I have also run a port testing program, some are successfully opened the others are not.
Is there some button i need to check or switch on the modem?
I started using a D-link 2750U wireless modem-router about 2 months ago, and configured it using the given disk for my ISP (MTNL Delhi). Since then, it has never retained a connection for more than 10 days, give or take i.e starts showing a red earth light instead of a green one. I usually reset it to factory settings and reconfigure it using the same disc over and over again, but now it has started dropping connection more frequently.Recently, it developed a new disease. Connection is very unstable now. Through line, it keeps disconnecting every 4-5 minutes. re-connects and dies again itself and does not work through wi-fi at allMy hardware quality healthy as I ran a wired connection for over 3 years without any trouble before this one.
View 1 Replies View RelatedRegion : Spain
Model : TL-MR3040
Hardware Version : V1
Firmware Version :
ISP : Movistar
I can connect easily to internet with TP-Link MR-3040 router and Huawei E173 3G modem, but the router is disconnected or reseted after a while with no reason. it works fine between 5 and 15 minutes, rarely more than 1 hour, and when i see a video or download a large file the reset is almost automatic. This never happens with the Huawei modem connected directly to the PC!
Region : India
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Idea 3G
I am using TP Link 3040 V1 and whenever I am using it with my IDEA 3G dongle model no E1732 it keep on getting disconnected after 15-20 mins.
When i restart the router again it works fine for another 15-20 mins and then again disconnects.
When I use the dongle directly in my laptop it works fine without disconnecting. So the issue is not in the Idea dongle but in the router.
Im using a DLINK DIR 615 N series router.It was working fine since few months but recently from past 1 month, my router is keep on getting restarting.Like, it restarts (red light is on) frequently after every 10 seconds, even i can't get so much of time to reconfigure it.
View 3 Replies View RelatedI have an E1200 model 1 router. I've owned it for over a year and it's given me no problems until now...Hardwired ethernet connections work fine, but the wifi no longer works consistently. I have several wireless-N wifi devices that either cannot connect to the router at all (they present an error message), or do connect but will not load anything over the connection, or will load web pages very very slowly and then suddenly drop the connection.When I go to the DCHP client table, I see all of my ethernet connections but it does not show any wifi devices, even if the WiFi device is showing a connection to the router.The wifi connection is secured via WPA2 Personal.I have tried changing channels to one that was not congested with any other nearby routers. I have also tried a 30-30-30 factory reset. I am updated to the latest firmware version (1.0.03). I am sure I am entering the correct pass phrase to connect over WPA2. All of my wifi devices are confirmed to be wireless-n, not g or b.
View 7 Replies View RelatedRegion : Italy
Model : TD-W8970
Hardware Version : V1
Firmware Version : TD-W8970_V1_130201
I just bought online a brand new TD-W8970 modem/router but I'm in trouble with getting ADSL working.I set up a PPPoE connection with the settings from my ISP but the ADSL Led on the device is solid OFF and in the Admin section it says DSL Status: Not Connected.
[code]...
Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP : Virgin
I've just replaced my aging ZyXel Wireless Router with a TD-W8970 which connects to the internet with no problems whatsoever. However, I have an ethernet connected Western Digital MyBookLive NAS which is happily allocated an IP addess but does not show up on my network on my PC (Windows Vista - fully patched). A usb connected pen drive and exactly the same. Am I missing something blindingly obvious? On the ZyXel the NAS worked with no problems whatsoever.
The problem with the NAS was my internet security Bitdefender. For some reason, on installing the TP-W8970, it switched my firewall status to public from home/office. Corrected that and the NAS can now be seen over the network. This does not fix the USB attached pen drive not being seen problem though.
Region : India
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :
According to inSSIDer the router seems to be using two wifi channels (10+6) and inSSIDer is recommending to move to a standard channel (1,6,11).
Region : UnitedKingdom
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111130 Rel.55990n
ISP : BT Broadband
Just got myself a new Modem/Router (TD-W8960N), and it wasn't until I had it all up and running that I realised it didn't have USB port on the back.Anyways, I was wondering how I could go about fixing this? I stumbled upon this (TP-Link TD-8817) on Amazon and wasn't sure if I could attach this to it in bridged mode or something. This has the USB socket I need. If this was all I needed, how do they connect together? I have a BT connection btw.Also, I have a Justop Android 4.0 TV Box (media player). Would this be able to see the HDD for streaming movies.
Region : Others
Model : TD-W8901G
Hardware Version : V6
Firmware Version :
ISP :
problem with filtering
Region : Syria
Model : TD-W8901G
ver 6.0
54Mbps wireless G ADSL2+:
I used the url filter utility inside the router program. I put some url for example www.google.com, I wanted to try the filtering cababilty, Later I deleted all these adresses , but unfortunatley it keeps telling me the following message: "The system returned: (110) Connection timed out The remote host or network may be down. Your cache administrator is webmaster@proxy1."
I have a E4200 v1, connected with a few PCs by ethernet ports and various devices by wifi. Now the wireless devices work perfectly but sometimes the PC via ethernet ports cannot connect to LAN and internet.
View 2 Replies View RelatedI use a wired network connection to my neighbours Vodafone Modem (We share his monthly cost). I also have a TP-LINK 54M Wireless ADSL2+ Router from a previous broadband contract with a landline phone company. Is it possible to reset and configure the TP-LINK Router to act as a relay unit, connected to the network cable, so I can then use my laptop elsewhere in the house?
View 3 Replies View Related