SBS 2011 Server Not Showing Up Properly On Netgear VPN 318v3 Router?

Feb 25, 2012

I have had a heck of a time getting this server up and running and it looks like I finally have it, except for one thing. Everything works except for the vpn. I do not have the vpn portion on the router configured since the SBS server will be acting as the vpn host, but maybe I need to configure the vpn elements on this router for it to allow vpn connections in?The other thing that is "off" as the title of this post indicates is that the server is not showing up on the router's attached devices under the correct name. It's showing as some generic WIN-****** nameI am doing this project for a non-profit without compensation and the networking part of it has been a nightmare. So any solution that doesn't entail me reconfiguring the server. Everything else appears to be functioning properly, dhcp, dns, ingoing, outgoing mail and the web interface.

View 5 Replies


ADVERTISEMENT

ITunes Server For Windows Home Server 2011?

Mar 10, 2011

Is there an iTunes Server for WHS 2011 available?

View 3 Replies View Related

Installed AVG 2011 And AVG PC Tune-up 2011 - Connected Internet But Can't Use

Feb 21, 2011

I recently Installed AVG 2011 and AVG PC tune-up 2011. When i just start my computer the internet is working fine, but after a open my game Flyff, The internet is still connected but cannot use it.

View 2 Replies View Related

Netgear Wireless Router Not Working Properly

Sep 13, 2011

I recently replaced a Linksys wireless router with a Netgear wireless router(provided by Comcast) to the modem in my house. I used my HP Pavilion as the computer to run the setup disk and the wireless wizard to link the new router to the modem. I unplugged my HP from the router and proceeded to setup my computer on the wireless network.

View 14 Replies View Related

HP Media Smart Server 495 Running WHS 2011

Apr 15, 2013

1. Apple extreme router. Newest model. Full updates.
2. HP media smart server 495 running WHS 2011. Upgraded memory. Very stable and full updates.
3. Typical Win7 gaming machine from last year. It was about $1200 at the time, no issues.
4. Cat5e cabling.
5. A gigabit switch, but both the win7 and server are connected to the router.

I'm only asking about WIRED issues. When I'm copying files from my computer to server using teracopy I'm only getting about 10-11 Mb. Consistently.

I had made a thread earlier about getting a new synology server but could I have a more fundamental issue? Reason I'm asking, I copied a file from my wireless laptop to my server and it was almost 1/2 the time for the same file from win7 to server. I'd love to get the synology but kinda hard to justify $1000+ when things seem to be stable.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Media Server - Certain Files Cannot Properly Parse

Jul 18, 2011

I decided to play around a little more with the media server feature... I've succeeded in getting SOMETHING consistent out of the 1.0.02 firmware. It's not 100% useful.
 
Here's what I did - whether it's pertinent, who knows:
 
1) I made the Media Server "Name" completely unique. My router's name was "Penguin" and that seemed to proliferate throughout the settings on the router everywhere (SMB server name, FTP, Media Server, etc.). I decided to just call the media server "Server." I then checked the option to DISABLE the server, and saved settings.
 
2) With the Media Server OFF, browse to the share on the USB drive, and completely delete the T wonky folder.
 
3) On the Media Server page of the router config, add your media sources.
 
4) Enable the Media Server, save, and you'll then see the T wonky folder come back, and if you go into that folder, you'll see some files being "built."
 
I tested a few videos and some music with the XBMC media player on my Mac book and a Windows 7 PC. I was able to add music and video sources on my small selection of test music and videos. I was also able to play them. MP3 tags and embedded artwork showed up properly, and the streaming over wireless was very good.
 
Now... Here's the kicker. This was just a VERY small sample of my entire collection. I had about 5 albums in MP3 format on the drive, and about 10 movies that I personally converted to MP4 with Handbrake (ripped each movie to about 1.4gb). When I threw my entire 90gb music collection on the drive and told it to scan (it, being the router Media Server page), it seemed to populate the albums up to a certain point, and then crashed. I saw the data files in the T wonky folder getting larger for about 5 minutes, then it stopped growing. At that same time, XBMC wasn't able to see any music or videos. Even after turning off the media server, then re-enabling it, I wasn't able to see anything. If I deleted the T wonky folder, and went back to a smaller subset of my collection, it once again worked "reliably."
 
So, one of several things is happening here.

1) There are certain files the media server cannot properly parse, and it's crashing the services that run it.
2) Something is corrupting the media database files which then prevents it from showing up.
3) There's a maximum number of files or file size that your collection can be.
 
If only there was a syslog we could get to on the stock firmware...  Linksys.

View 1 Replies View Related

Netgear N600 WNDR3400 And BFBC2 Working Properly?

Feb 6, 2011

Recently got a Netgear N600 WNDR3400 router. It works fine, aside from that fact that servers either have - or 999 for a ping.

I have not had this issue with my older Linksys router. What do I have to do to set up this Netgear? How to get BFBC2 to work properly on this router?

View 6 Replies View Related

Comcast SBS 2011 Router - Hooking Into Domain Instead Of Workgroup

Feb 11, 2013

I am new to dealing with domain setups and Windows Server. Here is my setup:

Comcast business cable modem
Gigabit Switch
IBM x3100 M4 w/Xeon E3 1230, 16GB ECC DDR3 RAM Running SBS 2011 Standard
Custom PC with Win7 Pro, i7 3770, 12GB DDR3 RAM

What I would like to do is setup sbs 2011 as the domain controller and have the custom pc on that domain.Comcast business cable modem/router is set for defaults, handing out dhcp.

Both Server and custom pc are hooked into the switch which is hooked into the comcast router.SBS 2011 I believe I set it up with the default settings. Updated it so all the patches are on it. It sees the comcast router and connects to the internet no problem.

Custom PC is sees the comcast router no problem and gets its ip address from there like normal.When trying to join the domain on the sbs computer the custom computer cannot find it even though I can ping the server.

View 13 Replies View Related

D-Link / Netgear - Network Is No Longer Showing

Jun 16, 2012

The other day while I was browsing the internet all of a sudden my internet stopped working. I look down below and try to connect to the network again but it no longer shows my network anymore. I went into the room of my router and it looked fine. All lights were lit up like they should be. I turned on my Laptop to see if it was just a problem with my desktop but it's still not showing my network either.

I have restarted my router and reset it numerous times and it has still yet to show my network. It only seems to work if I connect it to my Laptop with an Ethernet cord. I have two different routers (Both Linksys) and they both do not work.I also have two different wireless adapters (D-Link & Netgear) and they both do not work

View 14 Replies View Related

Netgear N300 - Laptop Showing As Intruder On Network

Jun 6, 2011

Just purchased a new Router and set it up. Powered up my laptop and its showing it as an intruder and isn't allowing it to access the net. How do I solve this and allow it to connect? Router is Netgear N300 Wireless Router

View 2 Replies View Related

Cisco Wireless :: WLC 5508 - Separate DHCP Server Required To Get Option 43 Setup Properly?

May 7, 2012

I am using a WLC 5508 and its internal DHCP server. I cant find anywhere I can setup option 43. However, the access points are connected in just fine. Do I need to worry about setting up a seperate DHCP server to get option 43 setup properly?

View 7 Replies View Related

Netgear WGR614 V9 Router - Unable To Resolve Server DNS Address / Error 105?

Dec 27, 2011

I'm connected through the router, a few times a day I cannot open web pages, getting error: Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address.Skype continues to work. Here are the results of pinging:

Quote:

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersSri Guru>ipconfig /all[code]....

One technician said that this is the providers problem, but I don't think so. When I restart the modem everything works.I have a Netgear WGR614 v9 router.I use ESET 5 security. Btw, connection drops on all computers connected through the router, so it's not my firewall.

View 3 Replies View Related

Motorola SURBOARD SB6121 - NETGEAR WPN824V2 Wireless Router - Cannot Connect To Primary DNS Server

Jun 4, 2012

When I plug my desktop into my wireless router I have slow internet but when I plug directly into the modem I have no connection at all. It says "cannot connect to primary DNS server". I'm using a Motorola SURBOARD SB6121 and a NETGEAR WPN824V2 Wireless Router. When I do ipconig /all this is what I get:

View 11 Replies View Related

Server Not Showing Up In Network Places (2008 R2)

May 18, 2011

I am having trouble setting up mapped network drive or folder. My server and workstation are set up on a domain with windows server 2008 r2. The server only shows up on my workstation(windows 7) when I put in \server in the search. It pops up then on the left hand side but not in the main window. When I go back to my computer "map network drive" I hit browse and still the server does not show up under the network (but my computer does). When I try to do this on the server, I go to map network drive and nothing shows up under the network. I have even gone into group policies and mapped the drive that way and still nothing shows up.

View 1 Replies View Related

Servers :: Mail Server Showing Multiple IP's When Pinged?

Mar 14, 2012

When I'm pinging my mail server, it gave me different IP's at different times. As the mail server is actually owned by us, I would like to know if that is possible without the IP actually being changed by someone.

View 8 Replies View Related

Windows Server 2003 - 2 NIC's Not Showing Up Under Network Connections?

Sep 5, 2012

So I just installed Windows Server 2003 64 bit on an older HP Proliant DL360 G5 and am trying to connect it to my network but neither of the 2 NIC's are showing up under Network Connections... the only option I am given is the ''Add Network Places Wizard''.

I have an ethernet cable plugged into NIC 1 and the LED's work so I know it's not a bad NIC card- do I have to download drivers for the NIC? Do I download them to a USB/CD and then just boot from that?

View 1 Replies View Related

Anti-Virus For SBS 2011?

Aug 24, 2012

AV for SBS 2011 that also works with Exchange 2010? I found Trend Micro Worry-Free Business Security Advanced 7, but unfortunately it doesn't seem to have a free trial.

View 5 Replies View Related

TP-Link 300Mbps Wireless :: Media Server Not Showing Files?

Dec 22, 2012

Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n

I have set up the router with a USB FAT32 Stick 8gb shared six folders with about 5gb of music inside the server only streams the first folder to the network and inside that folder all the MP3 files and another 2 sub folders but not others. Whats the reason for this is there a limit to the amount of files that can be shared if so this should be made clear in your

View 8 Replies View Related

Cisco Application :: ACE 4710 - Monitoring Real Server Showing N / A?

Jun 25, 2012

I recently installed a Cisco ACE 4710 version A4(2.0) into our test network. Load balancing across a number of web servers appears to be working ok and serving pages to users. However, when i tried to check the real time stats via device manager (Monitor> virtual contexts> context > Real servers) a number of fields specifically "current connections", "total conns", "failed conns" etc were showing N/A. Do I need to enable this somehow i.e. polling, if so how?

View 5 Replies View Related

Cisco Application :: ACE 4710-K9 - VIP Not Showing Webpage From Real Server

Mar 27, 2013

my ACE 4710-K9
 
I cannot reach a web page when accessing my VIP on ACE, here is i paste my configuration
 
VIP at 10.49.30.223
RS1 at 10.49.30.221
RS2 at 10.49.30.221

[Code].....

View 8 Replies View Related

Wireless :: Cannot Find Wireless Router With AVG 2011?

Jan 4, 2011

I have very basic knowledge with computers and anitviruses etc....However, everything was working fine with regards to my wireless connections. But ever since I have installed the AVG 2011, my computer does not recognise my wireless router. I know the router is fine as I am able to connect through my Iphone and other Laptops.I have tried switching off the firewall, but that has not worked.

View 3 Replies View Related

SBS 2011 Placing Shortcuts To Company Web

May 29, 2012

By default SBS 2011 places a shortcut on the desktop to companyweb and adds shortcut in the start menu under Windows SBS to companyweb as well.

I found the instructions to edit out the xlm file for SBS 2008 to prevent this from happening but that does not work with SBS 2011 as I do not see those settings.

I did also find the login script for SBS 2008 settings to remove those after the fact all of the time and that is easy enough to change to make it work with SBS 2011; but I would much rather just prevent the shortcuts from being placed in the first place.

View 2 Replies View Related

Netgear WNDR4500 - Clients Not Showing Up In Clients List

Jul 6, 2012

I have a Netgear WNDR4500 running the stock firmware, acting as a router for my home. I also have 2 routers that are flashed with DD-WRT (Linksys WRT54G and Asus WL-520GU) running as client bridges. The Netgear is 192.168.1.1 and the other 2 client bridges are 192.168.1.2 and 192.168.10.3. The Netgear router is performing DHCP giving addresses from 192.168.10.100 to 192.168.10.254. I have numerous machines connected to the Netgear, wirelessly and wired, and numerous machines wired to each client bridge. All machines have IP addresses that are 192.168.10.100, 192.168.10.101, 192.168.10.102, etc... Everything is working fine, but I have one question: When I access the Netgear router, it shows the client bridges as clients, machines that are wired and wireless to the Netgear router are listed as clients, but the client list does not show any clients that are connected to the client bridges. I assumed that since the router is performing DHCP that all clients would show up.

View 2 Replies View Related

Access Backed Up Files On A WHS 2011 Computer?

Nov 10, 2012

I'm considering upgrading my home server to 2012 Essentials from WHS 2011. WHS 2011 has always been strangely finicky and I have a new Win8 laptop, so i would like to take advantage of the new options in Essentials.that said, I was looking to access my data on the WHS 2011 system to back IT up, and all I see are a bunch of 4,194,304kb .dat files. I've been lucky in that I have never had to recover data from the server, so this has been an interesting issue. how does one access the backed up files on a WHS2011 computer, short of doing some kind of restore?

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1042ND - Media Server Not Showing File Extensions

Nov 28, 2012

Region : Ukraine
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : 3.15.1 Build 120618 Rel.41178n
ISP :

I'm having the problem to playback video files from Media Server on Samsung TV.And i found out the problem, that media server showing video files without extensions as avi or mp4.Windows Player somehow recognize video codec and container without extensions, but Samsung TV doesn't.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: WDR3600 Media Server Not Showing All Folders?

Mar 23, 2013

Region : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP :

I have the WDR-3600 with a usb drive. I have updated to latest firmware 3.13.26. I am having problems with the media server. I have 331 folders shared in the Music folder. When I access it via the DLNA it will only show the first 123 folders. I can access all of the folders via network share but not via the media server. I have checked this on my music player and my android phone and tablet. Both of them can only see the first 123 folders.

View 1 Replies View Related

Linksys Cable / DSL :: WAG160Nv2 Not Working With New 2011 Macbook Pro?

Mar 20, 2011

Signal drops constantly and seems to be a problem with the Mac more than the router IMHO but i thought to register the problem here.
 
I'm not alone as many users on the Apple support forum are experiencing the same drops via airport and with different routers..  Lan line works fine for me with no issues
 
I will update the firmware and try that as it seems i am running old firmware V2.00.13

View 4 Replies View Related

Cisco Routers :: RV180 Settings To Use Windows 2011 SBS

Oct 4, 2012

I have an RV180W router and I am trying to use the Windows 2011 SBS. It seems like I setup everything properly in order to use the remote access, but when I try to log on from home, I don't have any luck. According to Window's instructions, here's what I have setup on the router side:, I turned on UPnP. (they say to either do port forwarding, or UPnP, but I found on the Windows SBS that I had to do both in order for it to say it was working).

View 2 Replies View Related

Dell :: Inspiron 2011 Stopped Connecting To Internet

Aug 24, 2012

A Dell Inspiron laptop (2011) with Windows 7, will not connect to the internet. Wireless network shows good connectivity and I tried plugging in my ethernet cable between the router and my Dell and it didn't work. My desktop and other devices (Wii, other laptops, itouch) can connect wirelessly without a problem. I have had this laptop for about a year and it has worked perfectly until today. I was using the internet an hour prior to shutting down the system. When I restarted it an hour later the wireless connection was there, but there was an error saying that I could not connect to the internet. I tried restarting the router and the system and nothing worked. Could this be a hardware problem with the network card? I have been using the network card heavily for internet gaming and noticed that the laptop has been getting very hot.

View 4 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR3600 - Media Server Not Showing Or Playing Files

Mar 16, 2013

Region : CzechRepublic
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP :

1. On my laptop in windows vista media player I cant see any shared media of media server TP-WDR3600: screen.jpg

2. My samsung tv shows all three shared folders of media server. When I try to play any Mp3 and avi files it says unsuported file format. In folder with jpg photos it shows nothing. I can see and play anything from my laptop media server on TV.

View 1 Replies View Related

Cisco Routers :: RV 120W And SBS 2011 Essentials Remote Web Access

Dec 5, 2011

I have a RV 120W router and SBS 2011 Essentials server.  The remote access was working porperly, but now when I type the URL it brings up the RV login screen instead of the Remote Access sign in page.  I am not certain what settings are messed up.

View 3 Replies View Related

Vista Showing Normal Wireless SSID Plus Showing Second Unidentified Network

Feb 5, 2011

my computer is a dell dimension 1100, with a Linksys WMP54G wifi card, running vista home basic.In the wifi thing in the notification area, it shows two wireless networks, One is my normal SSID (Lower Net), and one is "Unidentified network". They are both on one wireless connection (Wireless Network Connection 3). When i try to go on the internet, it says i'm not connected. i tried disconnecting from the unidentified network, but that disconnects me from lower net too.

View 13 Replies View Related

NetGear PS121V2 Print Server Configuration?

Oct 10, 2011

I have a NG PS121V2 print server that i had working on my cradle point MBR 900 with a lexmark E238 I lost the MBR 900 during a storm so i picked up a Belkin N300 until i decide what to do about ISP.I can not get the NG Print Server to now. when i go through the setup wizard for the Print server i can configure and print a test page but as soon as i exit the setup wizard i can no longer print? e)

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved