I have very basic knowledge with computers and anitviruses etc....However, everything was working fine with regards to my wireless connections. But ever since I have installed the AVG 2011, my computer does not recognise my wireless router. I know the router is fine as I am able to connect through my Iphone and other Laptops.I have tried switching off the firewall, but that has not worked.
View 3 RepliesI recently Installed AVG 2011 and AVG PC tune-up 2011. When i just start my computer the internet is working fine, but after a open my game Flyff, The internet is still connected but cannot use it.
View 2 Replies View RelatedI am new to dealing with domain setups and Windows Server. Here is my setup:
Comcast business cable modem
Gigabit Switch
IBM x3100 M4 w/Xeon E3 1230, 16GB ECC DDR3 RAM Running SBS 2011 Standard
Custom PC with Win7 Pro, i7 3770, 12GB DDR3 RAM
What I would like to do is setup sbs 2011 as the domain controller and have the custom pc on that domain.Comcast business cable modem/router is set for defaults, handing out dhcp.
Both Server and custom pc are hooked into the switch which is hooked into the comcast router.SBS 2011 I believe I set it up with the default settings. Updated it so all the patches are on it. It sees the comcast router and connects to the internet no problem.
Custom PC is sees the comcast router no problem and gets its ip address from there like normal.When trying to join the domain on the sbs computer the custom computer cannot find it even though I can ping the server.
I have had a heck of a time getting this server up and running and it looks like I finally have it, except for one thing. Everything works except for the vpn. I do not have the vpn portion on the router configured since the SBS server will be acting as the vpn host, but maybe I need to configure the vpn elements on this router for it to allow vpn connections in?The other thing that is "off" as the title of this post indicates is that the server is not showing up on the router's attached devices under the correct name. It's showing as some generic WIN-****** nameI am doing this project for a non-profit without compensation and the networking part of it has been a nightmare. So any solution that doesn't entail me reconfiguring the server. Everything else appears to be functioning properly, dhcp, dns, ingoing, outgoing mail and the web interface.
View 5 Replies View RelatedAV for SBS 2011 that also works with Exchange 2010? I found Trend Micro Worry-Free Business Security Advanced 7, but unfortunately it doesn't seem to have a free trial.
View 5 Replies View RelatedBy default SBS 2011 places a shortcut on the desktop to companyweb and adds shortcut in the start menu under Windows SBS to companyweb as well.
I found the instructions to edit out the xlm file for SBS 2008 to prevent this from happening but that does not work with SBS 2011 as I do not see those settings.
I did also find the login script for SBS 2008 settings to remove those after the fact all of the time and that is easy enough to change to make it work with SBS 2011; but I would much rather just prevent the shortcuts from being placed in the first place.
I have a Dell Inspiron 1720 (running Vista Home Premium) that connects to my Linksys E2000 and to a wireless printer, the Canon MX870. It's been working for months without problems.
I just got a Toshiba Satellite P770-BT4G22 Laptop (running Window 7 Professional 64 bit) and installed the Cisco Connect software following the instructions where you have already set up the router and just need to install the software to do things like add a device. I can connect to the router fine using a web browser or the Cisco Connect Software and my Toshiba connects to the Internet through the router without problems.
The problem is Cisco Connect says it can't find a wireless printer when I run it on my new Toshiba. I've put the printer within 3 feet of the router with my Toshiba in between but still it can't find it. My Dell in another room connects to the printer no problem. And I can print to the Canon if I select the Shared Canon Printer ( on the Dell) using the Toshiba's Control Panel Add Printer function. But obviously that means the Dell has to be on so that's not good for much more than troubleshooting. I've also wired a connection from the printer to the Toshiba and downloaded the latest driver, printed that way so I know that's not the problem. The problem is that Cisco Connect can't find the printer. It says there are 6 devices attached to my router so it's seeing something, but I guess not the printer. I've turned any firewalls off for this testing too.
I'm stumped as to why it can't find the printer when the Dell did and they are all on the same network. Unless it's not compatible with 64 bit Windows.
I'm considering upgrading my home server to 2012 Essentials from WHS 2011. WHS 2011 has always been strangely finicky and I have a new Win8 laptop, so i would like to take advantage of the new options in Essentials.that said, I was looking to access my data on the WHS 2011 system to back IT up, and all I see are a bunch of 4,194,304kb .dat files. I've been lucky in that I have never had to recover data from the server, so this has been an interesting issue. how does one access the backed up files on a WHS2011 computer, short of doing some kind of restore?
View 2 Replies View Related1. Apple extreme router. Newest model. Full updates.
2. HP media smart server 495 running WHS 2011. Upgraded memory. Very stable and full updates.
3. Typical Win7 gaming machine from last year. It was about $1200 at the time, no issues.
4. Cat5e cabling.
5. A gigabit switch, but both the win7 and server are connected to the router.
I'm only asking about WIRED issues. When I'm copying files from my computer to server using teracopy I'm only getting about 10-11 Mb. Consistently.
I had made a thread earlier about getting a new synology server but could I have a more fundamental issue? Reason I'm asking, I copied a file from my wireless laptop to my server and it was almost 1/2 the time for the same file from win7 to server. I'd love to get the synology but kinda hard to justify $1000+ when things seem to be stable.
Signal drops constantly and seems to be a problem with the Mac more than the router IMHO but i thought to register the problem here.
I'm not alone as many users on the Apple support forum are experiencing the same drops via airport and with different routers.. Lan line works fine for me with no issues
I will update the firmware and try that as it seems i am running old firmware V2.00.13
I have an RV180W router and I am trying to use the Windows 2011 SBS. It seems like I setup everything properly in order to use the remote access, but when I try to log on from home, I don't have any luck. According to Window's instructions, here's what I have setup on the router side:, I turned on UPnP. (they say to either do port forwarding, or UPnP, but I found on the Windows SBS that I had to do both in order for it to say it was working).
View 2 Replies View RelatedA Dell Inspiron laptop (2011) with Windows 7, will not connect to the internet. Wireless network shows good connectivity and I tried plugging in my ethernet cable between the router and my Dell and it didn't work. My desktop and other devices (Wii, other laptops, itouch) can connect wirelessly without a problem. I have had this laptop for about a year and it has worked perfectly until today. I was using the internet an hour prior to shutting down the system. When I restarted it an hour later the wireless connection was there, but there was an error saying that I could not connect to the internet. I tried restarting the router and the system and nothing worked. Could this be a hardware problem with the network card? I have been using the network card heavily for internet gaming and noticed that the laptop has been getting very hot.
View 4 Replies View RelatedI have a RV 120W router and SBS 2011 Essentials server. The remote access was working porperly, but now when I type the URL it brings up the RV login screen instead of the Remote Access sign in page. I am not certain what settings are messed up.
View 3 Replies View RelatedI have a D-Link Router and I need to find the WEP number. How do I find it on my Router?
View 1 Replies View Relatedhow do i find a password for somebodys guest connection
View 3 Replies View RelatedI was gifted with a Roku for my tv & in order to set it up I need the WEP# from my Cisco Linksys wireless router, but I don't know where to find it. My brother's wireless router has the WEP # right on the label but I don't see one on the Cisco Linksys info label
View 3 Replies View RelatedNew hard-drive-need sec. key and any other required passwords to get back on my personal wireless network?
View 2 Replies View RelatedI want to use cisco connect with the Router E1200. There is a wireless connection between laptop and E1200 Router. When I run the "Cisco Connect" after couple minutes searching It can not find the Router and I have to put an (Router name SSID) and password.
View 9 Replies View RelatedOur network is being handled by a SonicWall Firewall. How do I find the IP address of the wireless router connected to the network switch. I am trying to reset the password of the wireless router.
View 11 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft� Windows Vista� Home Premium , Service Pack 2, 32 bit
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+, x64 Family 15 Model 75
[Code].....
I have a wireless router AOpen AOI-893. It works fine on my laptop, but I bought a new handheld Cruz tablet and when I try to connect to WiFi , the only strong signal seems to be a "default" one. It asks for a password, which I'm unable to come up with. I've tried all of the ones I usually use, plus 1234, admin, etc. No luck. Either I'm barking up the wrong tree entirely by trying the "default" , or I need to know how to find a password. I'm a computer illiterate.
i cant find my wifi password on my computer.
View 2 Replies View RelatedFind the WEP / WPA / Security Key / Password for wireless router?
View 2 Replies View Relatedwhere to find security key on wireless asus router?
View 1 Replies View RelatedIs there a way for me to find the password for my linksys wireless router so I can use the Wi-Fi on my iPhone at home?
View 1 Replies View Relatedi cannot find my security key for d link wireless router g22. How do I connect my laptop to the internet
View 1 Replies View RelatedHow can I find security key for router to enable me to set up wireless connection
View 2 Replies View RelatedHow do I find my Linksys wireless router security key?
View 1 Replies View RelatedI have a Netgear router (DG834G), but my Dell laptop can 't see it. All my drivers are up to date.
View 10 Replies View RelatedMy PC has a wieless card in it and last night the internet went off and then I wouldn't find my router at all, just everyone elses.I tried resetting the router, unplugging it an leaving it for a while, then resetting my PC. Tried unplugging the wireless card and plugging back in. Made sure I have latest drivers. Disabled and enable the card.I then tried plugging in an external belkin adapter in the usb and that worked.There are 2 other PC's in the house and they are both connecting to the internet fine. But I tested an old laptop we have and that didn't pick up the router either.I went on the pc in the other room next to mine and tried changing the channel it was on from 12 to 5 and it actually worked now my pc can find my router (???)But we've been having alot of issues lately with bad internet on certain channels etc.I don't really understand why channel 5 would work but channel 12 doesnt? We are experiencing more latency on that channel too.
View 1 Replies View RelatedCould you give me the WPA2 of the Airlink 101 wireless router?
View 2 Replies View RelatedI did not put a wep code/passphrase in my router when asked if i wanted it secure. I said yes and router was set up secure but I don't know the code. How do i find it?
View 1 Replies View Relatedhow do i find my wireless router passwoprd?
View 1 Replies View RelatedHow do I find the security key for my Belkin wireless router so I can join the network with my laptop?
View 1 Replies View Related