Netgear Wireless Router Not Working Properly

Sep 13, 2011

I recently replaced a Linksys wireless router with a Netgear wireless router(provided by Comcast) to the modem in my house. I used my HP Pavilion as the computer to run the setup disk and the wireless wizard to link the new router to the modem. I unplugged my HP from the router and proceeded to setup my computer on the wireless network.

View 14 Replies


ADVERTISEMENT

Netgear N600 WNDR3400 And BFBC2 Working Properly?

Feb 6, 2011

Recently got a Netgear N600 WNDR3400 router. It works fine, aside from that fact that servers either have - or 999 for a ping.

I have not had this issue with my older Linksys router. What do I have to do to set up this Netgear? How to get BFBC2 to work properly on this router?

View 6 Replies View Related

Gateway 2wire 3800 HGV-B Router - Wireless Working Properly But Wired Isn't?

Jul 22, 2012

I've got a Gateway 2wire 3800 HGV-B router which works fine wirelessly, but when using an ethernet cable to connect to the internet, it doesn't even recognize the computer. My laptop runs wirelessly all the time, and I recently picked up a desktop PC for home here, and it's the first wired connection I'm using, but for some reason the wired connection isn't connecting to my network, but instead it's own Unidentified Network.

View 2 Replies View Related

SBS 2011 Server Not Showing Up Properly On Netgear VPN 318v3 Router?

Feb 25, 2012

I have had a heck of a time getting this server up and running and it looks like I finally have it, except for one thing. Everything works except for the vpn. I do not have the vpn portion on the router configured since the SBS server will be acting as the vpn host, but maybe I need to configure the vpn elements on this router for it to allow vpn connections in?The other thing that is "off" as the title of this post indicates is that the server is not showing up on the router's attached devices under the correct name. It's showing as some generic WIN-****** nameI am doing this project for a non-profit without compensation and the networking part of it has been a nightmare. So any solution that doesn't entail me reconfiguring the server. Everything else appears to be functioning properly, dhcp, dns, ingoing, outgoing mail and the web interface.

View 5 Replies View Related

Modem And Router Not Working Properly Together?

Jan 12, 2011

I have a Netgear CVD31T modem delivered by my internet provider. I can't change any settings on the modem. My connection speed is 30 gb up and 5 GB down.Until now I used a Linksys WRT54GV ver. 2 router to share my connection between my computers and NAS server and it worked ok. In speed tests I normally get approx 25 - 28 GB speed. To optain more speed on my LAN I want to buy a GB router. And here started my problems. First I tried a D-link DIR655, then a Netgear WNDR3700 and latest a Linksys E3000. I all 3 occations my WAN speed droped drasticaly down to between 3 - 5 GB speed, at under a ping test I have a loss of between 10 - 30 % and time on approx 50 ms.If I connect my PC directly to the modem or re-connect my old router it works perfect. I have tried to replace cables etc. etc.

View 5 Replies View Related

Cisco Linksys E1200 Router Not Working Properly

Mar 7, 2012

The Network icon in the notification area in the bottom right hand corner of my screen will almost always look like this:Quite frequently, though, I will get an exclamation mark inside a triangle with a message instead saying No internet access (I don't have a screenshot). If I give it a few seconds, usually never more than a minute (30 seconds on average it seems), it corrects itself and gives me back internet access.

View 9 Replies View Related

Wireless Not Working Properly

Jun 3, 2012

Im having a problem with my wireless. My whole family is connented. to wireless. But when we all use it together it goes so slow. Like 4 some times only 2 people using it at the same time.

View 9 Replies View Related

Wireless Connection On Laptop Not Working Properly

Jan 24, 2012

When I check the strength sometimes it indicates it's good if I'm practically sitting on top of the router, this seems to eventually degrade to low until finally the connection drops.Repairing' with XP repair facility doesn't work. I can forget about getting a connection if I move further away from the router. At the moment I'm relying on using an ethernet cable snaking across the dining room, which isn't really practical with a toddler and a dog racing around. Recently a friend put a bigger HD in and before this it was working fine, so I suspect that it may be due to this. I think it's due to the wirless card in the laptop, as I have a number of other devices in the house which all work fine.

View 4 Replies View Related

Toshiba Satellite Pro C850 Wireless Not Working Properly

Nov 18, 2012

I checked what she needed, updated her drivers for Ethernet and Wireless, and the Device Manager is stating that they are both working fine. (no ! or ? on them)When I plug in an ethernet cable it works fine. It gets connection pretty well through my BT Infinity modem.However the wireless will not pick up any connections at all. I attempted troubleshooting, and all it says, "Your network adapter is experiencing problems" etc.I thought that I may need to turn on Wireless Association on the modem, but that didn't work. My dads laptop is also a Windows 7 Laptop and that works fine and will bring up all connections in the area, including mine.

So I googled around, and I found that I may need to turn on a wireless switch. After looking around the laptop, I noticed two things. 1) There is no wireless switch, and 2) There is an orange light above the WIFI symbol.So I googled around a bit more, and found it might be turned off in the FN+f8 Flash card feature. At first I couldn't actually bring this up, so I reinstalled the flash card, and it began to work. It claims the wireless connection is "On".I am not sure what to do next. I have checked the services to make sure WLAN Autoconfig is on Automatic, and Started, and it is. I also tried disabling, then enabling both ethernet, and wireless connections, which did nothing.

View 19 Replies View Related

Linksys Wireless Adapters :: WUSB54AG Not Working Properly

Jul 17, 2009

I just installed windows xp pro 64bit and i am not able to use it im guessing because i need the correct driver, ive tried looking around but couldnt find anything. I also try it working with Windows 7 ultimate (64bit) and i could not get it working on that either.

View 4 Replies View Related

Netgear Wg111v3 Wireless Router Not Working?

Jul 6, 2011

I have a windows 7 computer and have installed a netgear wg111v3 it worked for a while but now it has stopped working.

It detects wireless networks still but cannot connect.

View 5 Replies View Related

Netgear Router - Wireless Capabilities Are Not Working?

Feb 7, 2013

I own a Netgear Router and the wireless capabilities are not working. I have it connected to a comcast arris Modem. When i have and ethernet cable connecting my laptop, router, and modem, i get a connecting. but im not sure how to get the wireless running. I have used this router before ith my old internet provider. Ive tried messing around with the router settings for a while but i cant get it working.

View 1 Replies View Related

Netgear N600 Wireless Router Stopped Working?

Jan 5, 2012

[CODE]My router stopped working when I tried to connect my new Samsung Smart TV to the wireless network by using the menu on the tv. I had to go and press the WSL button on the router. I pressed what I though was the WSL button and now my router doesn't work. I has three lights lit up, the power on light, a small green blinking light and an amber light by the number 1.I've gone to the Netgear website and they want $69 for assistance to get my router up and running. I can buy a new router for that much money. There has to be an easier way.

View 2 Replies View Related

Cisco Wireless :: HWIC-3G-HSPA Card Was Working Properly But 3G Interface Resets

Apr 5, 2011

We have Cisco 2811 router with  Hwic-3g-HSPA card. When I configure the system everything was fine. Around two weeks 3g interface works, got IP address ,everyting was fine.Yesterday I check the sytem and I saw that cellular interface become reseting itself, without stoping.We have 2 g.shdls and one 3G connection on the same router. dialer 0 ansd dialer 1 for g.shdls, and dilaer 3 for 3G connection. [code]

View 1 Replies View Related

Netgear WNDR 3400 V2 Wireless Router Not Working With Vista?

Sep 18, 2012

I had a wired router (dlink) that worked fine until it died. So I bought a netgear wndr 3400 v2 wireless router.I can connect to the wifi with my phone, but not with my desktop (running vista home basic).I called my isp, and we went through all the physical set up and that was fine, but it still said unknown network....he said it was that vista was not recognizing my new router....Here is my ipconfig /all business

Microsoft Windows [Version 6.0.6002] Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersLindsay>ipconfig /all
Windows IP Configuration
[code] .....

View 14 Replies View Related

Windows Network Not Working Properly

Mar 25, 2012

i had an extra network under my wireless networks that was just called "network" which was not connected to anything, but since i had this, on the bottom right of my screen where it normally showed the bars for the wireless connection, it had the bars grey with a red X on them, but my connection worked fine still.I am using windows 7 64x bit. I always use a wireless connection on my laptop.

View 6 Replies View Related

Windows Vista 7 Not Working Properly

Apr 7, 2011

I have 2 computers, One running Vista 32, Desktop.Another, Laptop, Win 7 64bit.Both computers have given Error 651 when using PPPoE wired connections, usually at the peak of the day.My ISP says that Error 651 is the problem, while I am starting to think its the amount of bandwidth their giving my neighborhood/home.Also, can that dosen't work,how to fix the overall problem of my Internet shutting off at peak hours?

View 2 Replies View Related

Wifi Adapter Not Working Properly

Mar 11, 2012

when I couldnt turn on the wifi from the switch. It remained orange(which is its off state) and so I went to the device manager and the wifi adapter was shown there but with an exclamation mark. Showing the error "the device cannot be started(code 10)". So I uninstalled and rebooted, only to get the same error when it got reinstalled.

View 19 Replies View Related

Internet No Longer Working Properly

Jun 2, 2011

Last night on the xbox 360 i was suddenly experiencing alot of lag on other peoples voices. i took no notice of it and the next day i went on my laptop and alot of websites wouldn't load properly.i can go on google,obviously this and my hotmail(after having to wait a long time for the hotmail to load), but others such as ebay will not load. I cannot even access my router settings by typing in my ip address, instead i get a message saying the page cannot be found. also i was disconnected from xbox live with the internet to xbox live part not working. Obviously the first thing i done was turn the router off and back on but it hasn't made any difference.

OS Version: Microsoft Windows Vista Home Premium , Service Pack 2, 64 bit
Processor: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4055 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1804 Mb
Hard Drives: C: Total - 290204 MB, Free - 141170 MB; E: Total - 14999 MB, Free - 5644 MB;
Motherboard: Dell Inc., 0G848F, , .5MDJWJ1.CN7016697U05OT.
Antivirus: AVG Anti-Virus Free Edition 2011, Updated and Enabled

View 3 Replies View Related

TP-Link TL-WR841N Not Working Properly

Jan 29, 2012

I bought a TP-Link TL-WR841N which i have managed to setup up properly, i am able to connect to the wireless and get internet access. However the minute i walk out of the room or a few meters away i am disconnected and i can't re-connect, i get the "windows cannot connect to TP-LINK" message. The signal strength in on excellent and i know it works because when i stand near it, it works perfect.I phoned TP-LINK technical support who were pretty useless and couldn't fix the problem.

View 3 Replies View Related

How To Evaluate If Xbox Is Working Properly

Jul 7, 2011

how u would evaluate the effectiveness of the home entertainment (PC,console, Windo media centre

View 1 Replies View Related

Routers / Switches :: Internet Not Working Properly

Feb 26, 2012

ive been having some issues with my internet, i had an attack on my pc recently by some american orginization, ive reinstalled new windows on my pc, reset my modem, and nothign seems to work, i have too many tunnel adapters in cmd ip config i think, bell canada hooked up my internet lines and they actually joined two or more wires together and strung them up on the neighbours fence and mine and even wrapped it around a tree branch, god knows why they would even do that, maybe they think when the tree grows it will cost me money to fix it and theyll earn from thier mistakes instead of learn from them... anyway this is my ipconfig test results as explained in previous post from someone.Windows IP Configuration[CODE]

View 1 Replies View Related

Wired Internet Connection Not Working Properly

Aug 8, 2011

Some Trouble With My Wired Internet Connection,basically it worked somedays other days it cut off and didnt work for a few days,i phoned virgin media who sent me a new modem.Everything is set up and activated and it worked for about a day,now it has stopped working even though the computer says im connected,everytime i try internet explorer or firefox i get a white screen and every webpage i try fails,but if i bring up utorrent i can see that my internet is connected because it begins to download the ebooks

View 17 Replies View Related

Error - (Ethernet) Adapter Is Not Working Properly

Nov 15, 2012

So I have an HP Pavilion dv9000 laptop with window 8 installed and when I try to connect to the internet I keep getting an error that says the "Ethernet" Adapter is not working properly. I used to be able to go on the internet and then my dad had my computer for a while and now it's not working.

View 7 Replies View Related

D-Link DIR-655 :: Norton Ghost Not Working Properly?

Jan 8, 2011

I've been able to copy files to the WD drive attached to my DIR-655 router but Ghost gets an error even though is recognizes the drive is connected.

View 4 Replies View Related

Cisco :: ASA 5510 - VPN User Not Working Properly

Nov 30, 2011

I have a an issue with one particular VPN user. They are using the built in Windows Vista client to connect to my ASA 5510.

All other users do not have an issue and i receive the following error at roughly the same time of day when the drop happens. Authentication is done by my AD Server which handles all logins.
 
[code]...

View 2 Replies View Related

Cisco Firewall :: ASA5510 Not Working Properly From Outside

Feb 27, 2012

I not familiar with the ASA 5510 product. I having trouble since last 24 hours and still cant find out the root cause yet. Here is my scenario, my network should be
 
WAN --- ASA5510 (FW) --- SERVER (192.168.1.0/24)
 
Now I face the problem, all the NAT static 1-to-1 is working OK. All my public IP can be ping from outside internet. But the problem happen when I try to telnet to port 80 on each server. I had try telnet from my PC to public IP 124.xxx.179 80, it's work fine, but failed on 124.xxx.180 80, then on 124.xxx.181 80, its work fine.
 
Then I do try on my colleague PC, in same network as mine, I face another case where the public IP 124.xxx.179 80 cannot be telnet, but it's ok for 124.xxx.180, then failed on 124.xxx.181 80.
 
FYI.. all our PC can ping to the Public IP and no packet lose.
 
The scenario is very weird, I cant find any other solution as had review my configuration few times.
 
check does my configuration is working perfectly or not.
 
ASA Version 8.2(5)
!
hostname fw-asa
enable password xxx encrypted

[Code].....

View 8 Replies View Related

Cisco :: 1131 - AP Group Not Working Properly

Sep 27, 2012

I have one Flex WLC 7510 using software version 7.0.220, And all APs are 1131.
 
I have some sites with H-Reap, where H-Reap is configured properly.
 
The Access Points are set with AP Group. AP Group is configured properly too.
 
Each AP Group was configured for one site, and they was configured with 2 SSIDs. All sites has 2 differents SSIDs. During some basic tests, in one site with 9 APs, I saw:
 
1. When the Access Points are registred on WLC, all APs are working fine.     All APs has your 2 SSID added on slot 0 (radio 0)

2. If I disable the link between WLC and Access Points, 7 access points delete SSIDs on your AP Groups and replace it with 16 SSIDs (SSIDs on Default Group) configured on WLC.

View 5 Replies View Related

DD-WRT Repeater Half Working / Cannot Get WLAN To Function Properly

Jan 13, 2013

I recently made an old router into a repeater by using DD-WRT. It seems to be working fine if I use LAN, but I cannot get WLAN to function properly. When I go to add a virtual interface and all the proper info, I all of a sudden cannot connect to the Internet. More specifically it seems to not assign me an IP address.

View 1 Replies View Related

Wifi In Not Working Properly In Dell Inspiron N5520

Nov 21, 2012

i am trying to connect wifi .i have two wifi hotspots. it just connects with one hotspot and if i try to to switch to other one it just shows windows was unable to connect. and it does not switch back to the previous connection. even it does no go to communicate with access point. directly shows widows was unable to connect.

View 1 Replies View Related

Ethernet Controller Shown As Being Present But Not Working Properly

Jun 12, 2012

I've been having some problems with my Ethernet connection lately.I unplugged my laptop from the Ethernet connection I had at my old place.At two different locales, I have tried to use an Ethernet connection in order to get better speed (the wireless at the first locale was non-existent and at the second it is extremely slow in my room). I have done so with two separate cables that I have tested on others' computers and found that they are perfectly fine. That, of course, leads me to believe that it is my computer and is either a hardware or software problem (here's hoping it's the latter).Anyway, my laptop is a Dell Inspiron 1720 (purchased in 2006). About a year ago, I updated to Windows 7 from the pre-installed Vista. Never had any problems (as I said, everything was fine up until about a week ago). The installed card is a Broadcom 440x 10/100 Integrated Controller. Everything under Device Manager indicates that the hardware is working properly and has all of its drivers installed, but nothing is working.I have tried to uninstall and re-install the drivers (albeit by allowing windows to find them automatically), but the result is the exact same.I have checked the port and found that there is no debris or obstructions. My computer hasn't been dropped or mishandled in any way.I'm currently being housed on the campus of Delta State University, which is why this appears, but here is the report: [code]

View 5 Replies View Related

D-Link DIR-615 :: Schedules And Access Control Not Working Properly?

Jan 25, 2012

Trying to set up a simple schedule for keeping the kids from staying up all night.  I'd had this working on a Linksys WRT54G till it bit the dust.  I just want it to block internet after midnight. My problem is that the schedule is triggering the block unpredictably.?

View 3 Replies View Related

Cisco WAN :: 2911 - Can't Access Internet / NAT Not Working Properly

Jun 13, 2011

I have configured my CIsco 2911 router and there seems to be something wrong with my configuration regarding subinterface 0/0.102 The hosts on this subnetwork cant access the Internet and i cant spot the error.
 
Here is my running config on this matter.
 
class-map type inspect match-any LAN_TO_WAN
match access-group name LAN_TO_WAN
class-map type inspect match-any WAN_TO_LAN
match access-group name WAN_TO_LAN
class-map type inspect match-any GRE_TO_WAN
match access-group name GRE_TO_WAN
class-map type inspect match-any WAN_TO_GRE

[code]....

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved