Netgear WNDR 3400 V2 Wireless Router Not Working With Vista?
Sep 18, 2012
I had a wired router (dlink) that worked fine until it died. So I bought a netgear wndr 3400 v2 wireless router.I can connect to the wifi with my phone, but not with my desktop (running vista home basic).I called my isp, and we went through all the physical set up and that was fine, but it still said unknown network....he said it was that vista was not recognizing my new router....Here is my ipconfig /all business
Microsoft Windows [Version 6.0.6002] Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersLindsay>ipconfig /all
Windows IP Configuration
[code] .....
View 14 Replies
ADVERTISEMENT
Dec 31, 2012
The only difference I can see is the 3700 has gigabit ports. Any other performance differences about with these two routers? I already have the 3400 but I am wondering if I chose the wrong router seeing as the 3700 is only ten bucks more. What there experiences were or there knowledge of these two products or even opinions. I have a gaming PC hard wired, ps3 wireless, nexus 7 wireless, and LG Media Player wireless in a 1400 square foot house with one wall between ps3 and 2 walls between media player. I doubt range will be an issue with either routers though. I might transfer files between PC's later on but 10/100 should still be pretty good speed or not so much?
View 3 Replies
View Related
Jun 3, 2012
Tried to set up with my AT&T dsl moden. Cannot access internet when everything is connected. At&t says they do not support Netgear, so they couldnt facilitate. They sell Netgear on their website.
View 1 Replies
View Related
Aug 11, 2012
i have a netgear wndr3400v2 on windows 7 ulitmate and when i go to [URL] and try to find the setup access list option it doesnt show up but they say its suppose too
View 1 Replies
View Related
Mar 24, 2011
My problem is with xbox live, i have the WNDR 3400 N600 Dual Band Router and i have been experiencing lag spikes since the day i have gotten it. I used to have a wireless adapter and i thought that was the problem so i recently went out and bought a 200 ft ethernet cable so now im hardlined to the router I have the xbox set to highest priority, i have it set with a static ip address for the dmz so i have no restrictions, i have all ports opened just in case, i have great internet speeds : 18.04 mbps download and 4.03 mbps upload and nothing seems to work.. i still have lag that sometimes disconnects me from xbox live and ruins the whole gaming experience.
View 3 Replies
View Related
Mar 24, 2011
I have a Netgear wndr3400 and a wg602 can I use the wg602 as a repeater or bridge?
View 1 Replies
View Related
Oct 13, 2011
I bought this wireless router about a year+ ago, and it's just great. It's attached to the cable modem "downstairs" and right now it supports 2 smartphones wirelessly plus an ancient wired cable to an "upstairs" home office.
I'd like to improve overall performance with a wireless bridge to a gigabit hub in the upstairs office. I'd also like to add a second wireless bridge so I can stream movies to a box that would be attached to my TV, which does not have built-in wireless access.
Trendnet seems to have some interesting wireless bridges, but in the past I had a Trendnet wireless router with really, reallly bad software.
View 10 Replies
View Related
Jul 2, 2011
I have tried opening the ports on xboxs website. tried dmz. tried both. i have a basic understanding of changing your xboxs ip.i have disabled windows firewalls and got rid of macafee altogether.
View 10 Replies
View Related
Oct 12, 2011
I am running windows vista on my HP laptop (not sure what kind of laptop it is it just says HP on it) it wil no longer connect to my wireless NETGEAR WNR2000v3 and when I do get it, its local only. I recently had virus infections removed from someone who used AVIRA and MBAM (malaware anti bytes)
edit I tried to disable the autoscaling feature in windows and it did not work /I am running windows vista home 32bit/I can connect to the router now I had the wrong security type selected WPA instead of WPA2, but it still reports local only, I checked my router logs and it shows that it connects but it does not give me information on if it is blocking the laptop from the internet or if my laptop is. I have tried turning off the windows firewall and resetting it as well now.
I have tried the things listed below
- uninstall and reinstall windows wireless adapter drivers through computer managment
- disablied IPv6 through wirless adapter properties (unchecking the box)
- reset my rounter entirely (after which I can no longer connect to the router at all, where as before I did this I was able to connect to my router but it was local only) held the reset button for 10 or more seconds plus unplugged my modem and router for 5 mins, I know its alot of time for that but I was eating but regardless, after which I turned on my modem let all the lights go through their setup then I turned on the router let all the lights do their thing, and then my laptop to make sure everything picked up new settings.
-something threw me off also under computer managment under the network adapters there were ipv6 to ipv4 "tunnels" or something, they had the yellow warning sign on it.
View 2 Replies
View Related
Jan 7, 2011
We have three desktops...2 Macs and a windows vista...my brother has a windows vista laptop, my mum has a Macbook laptop and for Christmas I got a windows 7 laptop! But that's not all that relevant because all I am really interested in is setting up file sharing between my old vista desktop and my new windows 7 laptop, so I can transfer my music, etc across. (I know that I could easily do this by other methods but I want filesharing set up for the future).Both computers are wirelessly connected to a Netgear router.Initially i tried fiddling around with various network settings and I've managed to get the two computers to recognise each other...and they can access the 'public' folder. I tried fiddling with advanced sharing to let them access other folders which appear as shared folders, but when i tried to access them from the other computer i was denied access.
View 1 Replies
View Related
Oct 15, 2011
I'm getting decent signal through my 3 story home with my new router, however, there are some dead spots on the 3rd floor.
This is my setup:
1. WNDR-3700 Router on main floor
- TV is hooked up router (internet tv)
- VOIP modem hooked up to router
- USB drive hooked up to router for transferring files from computers upstairs to router USB driver
So basically, the router MUST stay where it is. I'm wondering if it's possible to WIRELESS-LY connect my WNDR-3700 router to another BELKIN wireless router. possible at all?
View 4 Replies
View Related
Sep 13, 2011
I recently replaced a Linksys wireless router with a Netgear wireless router(provided by Comcast) to the modem in my house. I used my HP Pavilion as the computer to run the setup disk and the wireless wizard to link the new router to the modem. I unplugged my HP from the router and proceeded to setup my computer on the wireless network.
View 14 Replies
View Related
Jul 6, 2011
I have a windows 7 computer and have installed a netgear wg111v3 it worked for a while but now it has stopped working.
It detects wireless networks still but cannot connect.
View 5 Replies
View Related
Feb 7, 2013
I own a Netgear Router and the wireless capabilities are not working. I have it connected to a comcast arris Modem. When i have and ethernet cable connecting my laptop, router, and modem, i get a connecting. but im not sure how to get the wireless running. I have used this router before ith my old internet provider. Ive tried messing around with the router settings for a while but i cant get it working.
View 1 Replies
View Related
Jan 5, 2012
[CODE]My router stopped working when I tried to connect my new Samsung Smart TV to the wireless network by using the menu on the tv. I had to go and press the WSL button on the router. I pressed what I though was the WSL button and now my router doesn't work. I has three lights lit up, the power on light, a small green blinking light and an amber light by the number 1.I've gone to the Netgear website and they want $69 for assistance to get my router up and running. I can buy a new router for that much money. There has to be an easier way.
View 2 Replies
View Related
Jun 6, 2011
Though, the internet works fine when I plug it into the modem with a yellow cable.The other computers in the house work fine, so at first I thought it was perhaps a virus- like spyware or something. I've used Malwarebytes and no luck. I also thought it was a bit coincidental that it occured simultaneously on both computers and not on my parents or brothers'.I've also tried several other of the tricks I read up on the net..- Unclicking proxy.- Going into device manager and uninstalling/disabling wireless, then installing again- Unclicking Ip6.- system restore.I'm out of ideas and about to do a repair install on the xp computer.One last thing.. I did notice that when going into Network Map - Wireless Network Correction - it says the adapter is not connected?
View 19 Replies
View Related
Sep 15, 2011
Ive been using my linksys wusb54g network adapter for a while. I have windows vista and until today it has been working fine. I reinstalled my OS because i had been having blue screen of death problems. Now that i've done this, i cant seem to get my adapter to work againIve seen a bunch of sites saying i need to install ralink rt2500usb or something, but the links for it never work as these pages are several years old.I cant figure this out. All i need to do is get my internet working and this adapter just doesnt work. Theres no support for vista i guess.
View 9 Replies
View Related
Jun 5, 2009
My Wireless network suddenly dropped out and now wont pick up any wireless devices.
When I go into Manage hardware it comes up saying that the Drivers are not installed for my network Controller. Searching does not find any to install and due to just relocating I cant find my original Disks that came with the laptop.
So I am reduced to sitting next to the router and being hard wired for the internet.
View 2 Replies
View Related
Feb 5, 2012
I pressed the reset button on my netgear router (WGR614 v7) and now the wireless light will not go on and i can't connect to it because I don't have a ethernet cable.
View 2 Replies
View Related
Sep 2, 2011
When I first got my Netgear N-150 router, the wireless speed on it was great. However several days passed and I started to notice the speed was decreasing; because I have HughesNet (I hate it) I thought this was the ISP's fault and called them and they said my speed had not gone down. During the day, the signal is fine and is at full bars and the speeds are OK. During the evening/night hours the connection becomes faulty and the laptop will disconnect from the network altogether. If I plug the ethernet cable directly into the router, the speed is OK also. I have taken the security off the connection to see if it will make any difference; it doesn't. I don't know if I need to buy a new router or what. I know my way around computers and routers (not entirely though) and I cannot figure it out. I have 2 laptops with Windows Vista both with home Premium.
View 11 Replies
View Related
Jan 8, 2011
I've got a Vista Business PC and a Vista Business Laptop connected via a virgin media router (Netgear CG2100D) and I cannot get the two machines to see each other correctly over the network. The laptop is connected via wireless, whilst the pc is wired. Both are set to recieve their network settings automatically (DHCP) and both have the windows firewall (the only firewall on either) turned off completely.
I can ping each machine fine from one another using the ip addresses, and I can also connect via . However, connections via fail, and I cannot see the machines in the network map.
I have tried turning netBIOS to be "always on" on both adapters, but this makes no difference.
I've been messing around pretty much for 6 hours now and am getting quite fustrated by this! (my original aim was to get media sharing working, but I've pretty much abandoned that for now).
View 1 Replies
View Related
Jun 4, 2012
Will not connect to the internet wired or wirelessly. It does turn on however. Not ISP or modem, because when comp is plugged in directly to the cable modem, internet connection works fine. I'm using a Comcast cable connection.
Router is Netgear-N 150 router wnr1000 version 2.My antivirus software is Malware bites, and when I ran it, it didn't find anything.
OS is windows 7 home premium 32 bit.Here's IPconfig:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:windowssystem32> ipconfig /all >c:ipconfig.txt
C:windowssystem32>ipconfig /all[code]......
View 14 Replies
View Related
Jan 2, 2013
Just finally updated my ancient belkin modem to a Netgear D3600WiFi modem router which works really well. However. I have a old G5 Mac without wireless so have always connected through my old belkin modem with Powerline adapters over my house wiring circuit:confused. Unfortunately the powerline adapters no longer work although both lights are flickering on the units. Netgear say they should work.
View 1 Replies
View Related
May 23, 2012
Today a bought a brand new Netgear WNR2000 router.Upon setup the wifi was working correctly. All of the lights where active and it seemed everything was in order.Because the power cord was in the way I moved it and plugged it into a different powerpoint. From then onwards my router has not been working. Only three of seven lights are active (green).
I have tried unplugging and replugging all network cords. I have also turned it on and back off, reset the router and run the initial installation program thrice.What should I do now? Nothing so far has effected it. The computer I am installing it on is running Windows XP and the laptop I intend to use the wifi on is Windows 7.
View 1 Replies
View Related
Aug 24, 2012
a few days ago my router was not working for wireless out of no where and its still not working. i only get internet on my main computer that its connected too. not my laptop ipod or tablet
View 2 Replies
View Related
Apr 10, 2012
I am having BSNL broadband & netgear router. Some of the sites are not opening like [URL] many more?
View 4 Replies
View Related
Apr 7, 2011
I have 2 computers, One running Vista 32, Desktop.Another, Laptop, Win 7 64bit.Both computers have given Error 651 when using PPPoE wired connections, usually at the peak of the day.My ISP says that Error 651 is the problem, while I am starting to think its the amount of bandwidth their giving my neighborhood/home.Also, can that dosen't work,how to fix the overall problem of my Internet shutting off at peak hours?
View 2 Replies
View Related
Jun 24, 2011
I recently reinstalled Vista on my Dell laptop.Before that,I could view and open shared files on my XP desktop, although the PC couldn't see the laptop.Now, I can get online, but can't see the PC in Network places.I've ensured both have same workgroup name.I think it may be due to Norton Internet Security,which I've renewed and reinstalled from new disk.But the former one didn't prevent file-sharing, albeit one way,XP to Vista.Before I uninstall Norton again, is there anything else I should have done after Vista reinstall ?
View 1 Replies
View Related
Apr 18, 2012
I'm having a really difficult time getting to find the right drivers for a poweredge 1950. I know it has 2 broadcom on-board NIC's and they work fine in Windows 7 so I feel I should be able to find drives for Vista bus 64. I tried downloading the drivers from the dell site and they turned out to be drives for server 2003 and 2k8, and wouldn't work with Vista.
how to identify the chipset of the onboard NIC's so I can do a better search for the drivers? I tried running Belarc advisor which usually gives pretty detailed info but it didn't even mention the broadcom's.
View 5 Replies
View Related
Oct 31, 2011
My internet went down temporarily last week and ever since my computer has not been able to maintain a connection. It will pick up the signal intermittently but produce painfully slow internet and then promptly lose the signal all together. The wireless connection is working perfectly on laptops and smart phones, even when in the same position from the router as my PC.
Router: Netgear Dg834Gv3
Wireless Adapter: Netgear WG111v3 USB
Computer: Dell Vostro 200
ISP: AOL
View 2 Replies
View Related
Nov 27, 2011
I have had the Netgear 3300 Dual Band for three years. Everytime I wanted to access using my laptop, I had to choose between 2.4G and 5G connection. For about a month now, the 5G does not show up. It doesn't show up as a network to select no matter what device I use. I have reset the router and updated the firmware. Both connection lights are blinking. I recently purchased and IPhone 4 and still I do not have the option of selecting 5G.
View 4 Replies
View Related
Feb 2, 2012
I faced a problem with my Dell Vostro 3400 (DW1520) Window 7 Pro (32 bit) where by I cannot detect my own AP but the listing shows only my neighbour's AP. It shows that my Wireless Network Adaptor is not connected.
View 11 Replies
View Related
Mar 11, 2011
My sony vaio (vista) has stopped working wirelessly. I have tried it at two locations with two different networks and modems and both times it would not work. So its the laptop that must be at fault. I can connect to the internet through the ethernet cable.
View 14 Replies
View Related
