Linksys Wireless Router :: E3200 - Sharing Files Over Network Stopped Working
Sep 23, 2012
I tried searching google and Cisco Home Community for this answer, but no luck. Maybe I didn't phrase my search correctly. I have an external drive connected to a mac mini which is shared on the network. When transferring folders to or from that external drive, our internet connection stops working until the transfer finishes, then comes back up. I've tested this in a variety of ways. Any transfer of data from shared folders in any combination of devices causes internet to stop working both on wired and wireless devices until the transfer is done, then they all work again. Router firmware: 1.0.03.
View 9 Replies
ADVERTISEMENT
Jul 24, 2012
I have a Century Link modem connected to a Linksys router. I have three computers hooked up wireless. I used another computer to hook up with the ethernet cable because that wouldn't work wireless for some reason. A little while after that, the Linksys network stopped working completely(all three computers could not access the internet). Now I can only connect to the internet if I use a ethernet cable from the modem.
View 2 Replies
View Related
Feb 3, 2012
Im having trouble with my E3200. The router is working fine in all areas, with the exception that I cannot get my PS3 to detect the shared USB drive that is connected to the router. The drive is detected /mapped on the connected Windows desktop, but files/folder/drive is not appearing on PS3. The PS3 is connecting successfully to the router, as I have a strong internet connection. I believed that the E3200 would be able to share the USB drive with my PS3 for media file streaming... Or have I not done something correctly in the settings?
View 3 Replies
View Related
Oct 10, 2011
Is it possible to share a usb printer over a network if I use the E3200 or E4200 router as an acces point? (I already have a router and will use the cisco as an access point only) I checked the documentation for "cisco connect" as best I could but I couldn't figure it out.
View 1 Replies
View Related
Sep 22, 2011
I've had the Airport Extreme router on our Macs at home for years. Finally upgraded and got the E3200.
With the airports, my wife could print wirelessly to our HP LaserJet, which is still showing as an available printer on the wireless network. However, since removing the Apple router and using the E3200 it won't print. When you choose to print wirelessly from the application, it says "looking for printer" and eventually fails and says printer is offline. (which it isn't).
The printer is connected via USB to an external USB hub connected to a Mac. The printer is not (and has never been) connected directly to a router - not the Apple one, or the new E3200.
On the Mac sharing settings, Printer sharing is turned on, so anyone on our network should be able to print wirelessly.
Does the Linksys require some special permission or setup w/ the CiscoConnect software in order to allow the wireless printing?
View 2 Replies
View Related
Jan 22, 2012
I just installed the E2500 to replace my older router. With my older router I was able to share files between the different computers in my house. All I did was replace the old router with the new one and now they cant share files? I looked through the router settings and cant find anything showing firewall blocking the file and print sharing. why I cant share the files and how to allow the file sharing?
View 1 Replies
View Related
Sep 18, 2011
On the main floor I have a Linksys E3000, hooked up to my ADSL modem along with laptop #1 which has all my video and photos on Picasa. Laptop is on 5ghz, running speed at 300. I'm running the E3000 in dual mode (running 2.4ghz and 5ghz at the same time.) I have 2 different network names mjames5gz and mjames24gz.
In my basement, I have a laptop running on 5ghz and an IP camera running 2.4 ghz. the signal in the basement is on the low side for both. Under Wireless network connection, I am getting around 100 on Speed vs.300 on the laptop.... The basement is fully finished so I can't run cables to the basement easily. What could I buy so I can stream videos from laptop to laptop on 5ghz. Would also be nice to have the 2.4ghz signal boosted as well
When I go upstairs, both laptop read 300 ghz and I can stream between them just fine.
View 3 Replies
View Related
Jul 30, 2012
A few days ago, my Linksys E3200 router stopped working suddenly for no reason. The SSID was still broadcasted for a few days, but no internet connection. Today the SSID does not broadcast at all and I seemingly have no access to it.I tried power cycling it.I tried reconfiguring it via the CD included in the box.I tried solving it with the wireless tools in Windows.
View 2 Replies
View Related
Mar 8, 2012
My router randomly stopped working after I bumped into the wire. It still shows up as a network you can connect to, but whenever I try to connect, it keeps saying there is a problem with my connection. I tried using a different internet cord, but nothing changes. I even tried to reinstall my router and still no dice.
View 6 Replies
View Related
Dec 19, 2012
EA4500 was working fine for about 2 months.Now, its not so happy.Power indicator is on.Plug something into one of network ports - nothing, and no indicator LEDs are on.Plug an operational internet cable into it - nothing, and no indicator LEDs are on.
View 3 Replies
View Related
Feb 2, 2012
Last night, my wireless router suddenly stopped working. I no longer saw my router listed in my available wireless networks, and neither could my girlfriend from her computer. I unplugged the router to see if one of the available networks had disappeared in case my router had somehow been reset, and nothing changed so my computer isnt even seeing my router. Right now, I am wired through the router so I know the router works, but the wireless part doesnt for some reason. I was looking up stuff in the FAQ, and think the firmware is corrupted since the LEDs are all blinking. I was trying to update my firmware following the instructions I found using tftp.exe, however it failed. One problem is that I can't set up a static IP address since I need to access the web-based utility to check my DNS server but I cannot access the web-based utility anymore (maybe cause of the corrupted firmware?). On a related note, there is someone else in my building using a linksys with the default network name of linksys. I had changed my network's name and security-protected it, though that is all likely gone now since I tried to reset the router. My question is what will the network name of my router be if I saw it since "linksys" is already taken. or will there just be two of them?
View 1 Replies
View Related
Oct 19, 2007
I have WRT54G connected to a cable modem for internet service. Came home at lunch yesterday and all was working fine. Came home after work last night and couldn't connect to the internet. Called Charter cable this morning and their troubleshooting showed I can connect to the internet fine if I bypass the router, so the issue must be with the router (and of course not their problem...). How do I trouble shoot this? I've tried powering down the router and releasing and renewing IP addresses but it hasn't worked.
View 9 Replies
View Related
May 29, 2012
I have a Linksys WRT54GS wireless router that has stopped working. All it will do is all 4 of the Ethernet port lights on the front light up solid green along with the Internet light. Is there any hope of fixing this?
It wouldn't make that much of a difference, but I already purchased a new LInksys Cisco EA3500, but I cannot get it to do my port forwarding. I have tried everything and nothing works. Have spent hours on the phone with tech support with no solution. My old WRT54GS just simply worked. The port forwarding worked perfect. I have tried the exact same setup in the new EA3500 and no luck no matter what I try.
So, is there anything I can do to get the old WRT54GS working? I have tried holding the reset button in for 1 minute and then unplugging it
View 3 Replies
View Related
May 30, 2012
My M20 Valet Plus stopped working suddenly last night. Now no power lights will come on and it now longer transmitts as a connection point . No apparent sign that it's alive. I've owned it troublefree for just over a year, but it is out of warranty. Any way to tell if there is hope of reviving it or if I'm just out of luck? Nothing happened at my end to cause this -- no power interruptions or other odd occurrences.
View 9 Replies
View Related
Oct 17, 2010
A couple days ago I noticed that my wireless internet connection on my iPhone would cut in and out, then stopped all together. I also had no connection on my mac which is wired to the WRT110. I bypassed the WRT110 and then I had a connection on my Mac meaning the WRT110 is the problem. I haven't changed or added anything lately that could've caused this....
View 9 Replies
View Related
Jul 25, 2011
I have the Linksys WRT54G And it was working fine for years! Then today my computer shut down and when I turned it back on there was a connection but my computer was not responding to any commands. The icon shows full connectivity excellent connection. When I try to go to a web page it shows Connection Error and cannot get to any web pages.I am able to get on other wireless connections from neighbors but not mine. I have gone thru different directions on here and I am not technical and don't understand what is being said. I try to go to 192.168.1.1 and it asks for a password which I don't have. I have tried everything such as password and admin and get nothing.I am able to get my ip address and default gateway address and don't know the next step.
View 1 Replies
View Related
Jun 24, 2012
I have the WRT54G router for years and use it to provide both a wireless network for our home computers and a wired network for by internet phone that connects me to my office phone system and for my work computer and printer. Last week, the wired network stopped working. I checked the wiring and plugged my wire into all four of the ports in the back of the router with no success. I followed the troubleshooting procedure that I found and changed the MTU setting. I tried to update the firmware but the screen seemed to lock up and I was unable to complete the task.
View 9 Replies
View Related
Jun 20, 2011
I was using my iphone one night last week and suddenly it dropped out and now I cannot find it in my WIFI networks page.I am using a Linksys E1000?
View 9 Replies
View Related
Jul 28, 2011
I've had the WRT400N for about a year and a half now and just last night it stopped sending out data when connected to my cable modem. I've tried connecting the modem directly to my Mac and it works just fine (that's how I'm sending this message now). But when the modem is connected to the router, I get no data. It connects to both the 5 Ghz and 2.4 Ghz networks, but it refuses to send data through the pipe. I've tried power cycling both the modem and the router to no avail.
View 1 Replies
View Related
Sep 13, 2012
i am a using a WRT54GH linksys router.. which was working fine for a year.. there was thunderstorm and lightning a few days back.. since then my routers internet port (the first port which says internet in yellow) has stopped working..
View 5 Replies
View Related
Feb 28, 2013
The router stopped working for wired connections. I can still go online using my laptop via wifi, but when I connect a network cable to the laptop and turn off wi fi, connection does not work. Can't go online with a desktop with a wired connection to router.Everything else works via wi fi: iPad, android phone, tv with wifi.
View 1 Replies
View Related
Jul 11, 2012
I purchased an e4200 about 6 months ago and it worked great until the other night the Internet stopped working on my laptop (wireless). I tried unplugging both my modem (Motorola Surfboard) and router and plugging them back in, but no luck. I can accesss the Internet when plugged directly into the router (with both my PC and laptop), so it looks like the issue is with the e4200. To make matters worse (and I fear much worse), I can't even access the admin page to the router through either the Cisco Connect software or through the IP address. I've tried resetting it, I've tried the 30/30/30 reset (holding the reset button while doing an unplug and pluging back in), and reinstalling the Cisco Connect software, all to no avail.
I've found threads where others have not been able to access the admin page, but they still had access to the Internet url... I haven't found a similar thread where the router doesn't seem to work at all. A few other bits of information I can think of (let me know if there's other information I can provide):The Cisco logo light flashes slowly after reset which I believe is expected.The lights in back of the router seem to work as intended.Running Windows 7 Diagnostics finds the connection "doesn't have a valid IP configuration" and "The default gateway is not available."
View 9 Replies
View Related
Jul 31, 2012
My router was working just fine forever, the only computer that will connect VIA wire is my desktop, everything else for it to connect to my network it has to go wireless. Things like my blu ray player just will not connect. I am not an expert at all, but why is only the wireless working? I can use the Cisco connect and adjust the settings if need be.
View 5 Replies
View Related
Mar 3, 2008
Last night, my wireless router suddenly stopped working. I no longer saw my router listed in my available wireless networks, and neither could my girlfriend from her computer. I unplugged the router to see if one of the available networks had disappeared in case my router had somehow been reset, and nothing changed so my computer isnt even seeing my router. Right now, I am wired through the router so I know the router works, but the wireless part doesnt for some reason. I was looking up stuff in the FAQ, and think the firmware is corrupted since the LEDs are all blinking. I was trying to update my firmware following the instructions I found using tftp.exe, however it failed. One problem is that I can't set up a static IP address since I need to access the web-based utility to check my DNS server but I cannot access the web-based utility anymore (maybe cause of the corrupted firmware?). On a related note, there is someone else in my building using a linksys with the default network name of linksys. I had changed my network's name and security-protected it, though that is all likely gone now since I tried to reset the router. My question is what will the network name of my router be if I saw it since "linksys" is already taken. or will there just be two of them?
View 3 Replies
View Related
Mar 5, 2012
My Linksys router stopped working. Resetting it didn't restore it.I bought a new Linksys E4200 router and configured it to the same settings as my old router. However, now I can't access certain website like Hotmail, Facebook, a weather site and others.But I can connect to most other websites, stream video, etc. Any suggestions why I can't connect to Hotmail, Facebook, etc???? I have 4 computers (3 wired, 1 wireless) connected through the router and they all do the same thing.
View 5 Replies
View Related
Jun 29, 2011
My desktop was wirelessly connected to a router. It was working perfect, I did a wired connection from the modem to the desktop and when I tried to get the wireless connection again it has not been possible. When I try network trouble shooting I get DNS server might be unavailable. Been reading around and tried many of the things that I've read but none has worked so far.
View 4 Replies
View Related
Sep 29, 2011
I have an N wireless adapter for my xbox 360. I want to make sure I am connected through N network, getting 5gbps.
View 6 Replies
View Related
Dec 16, 2012
I have been trying for the past 5 hours to set up a home network between my old HP Pavilion Windows XP PC, which doesn't have a wireless router, and another PC, running windows 7, on my wireless network. I want to remotely access the files on my old, slow, Big Bertha computer, which is soo terribly, horribly slow, using my new Win7 PC. But it won't let me! The XP PC is connected via ethernet cable to my Belkin Wireless-N router, and the new HP Win7 PC is connected to my wireless network via wireless signal. The computers cannot see each other or find each other on the network. I have tried- renaming the workgroup name on both PCs to be the same as the wireless network SSID, Installing some worthless "topology" update for the XP computer, which it refused to install, saying it didn't need it, Connecting the XP computer directly to the Win7 PC via ethernet cable and trying to bridge the LAN and Wireless connections on the Win7 PC and the LAN and Windows Network connections on the XP computer
View 8 Replies
View Related
Aug 13, 2006
I have 3 computers, all Macs. Two are hooked into my WRT54GP2 via ethernet cables, and one is using WiFi (Airport Extreme). All get an IP number from the router via DCHP (no hard numbers). The router is also hooked up to a Motorola Surfboard cable modem.The two Macs using ethernet have no problems at all, and can access the internet and share files and printers. The WiFi Mac, however, can access the Internet fine, but cannot mount the other machines as file servers. It doesn't even ping them. What is going on in the setup of the router that is preventing the ethernet machines from being seen properly by the WiFi Mac?
View 6 Replies
View Related
Jul 23, 2012
I recently replaced my old WRT54G router with a E3200 router.
Unfortunately, ever since my wireless network is a lot more unstable than before. I very often experience serious lag spikes and drops in speed. Very often I experience serious lag for a couple of seconds after which everything returns to normal. I notice this the most in online gaming, but it is also noticeable while browsing the web. When downloading large files (e.g. steam games), the download speed also seems to suffer from this by dropping every now and then.
There are no connection drops however. And it only seems to affect the wireless network.
I have configured the E3200 router manually using the Web UI and is has been configured exactly the same as my WRT54G: i.e. only 2.4GHz band enabled with b/g/n, WPA2 security, MAC filtering on, no throtling/parental control/port forwarding, UPnP disabled. The E3200 is in the exact same place as the the WRT54G was.
Things I have done so far for troubleshooting: I used inSSIDer to monitor the wireless network and it's signal strength seems about the same as the WRT54G. I changed channels for best signal strength (there is only one other wifi network that seems to be configured as a dual channel N network; 3 other networks with very low signal strength) and have tried every channel.
I updated the fimware to the latest version (Ver.1.0.04 (Build 1)) and did a factory reset and power cycle afterwards.
I noticed that switching channels can account for 5-10Mbps differences in internet speed. Something I never noticed with the WRT54G. The lag spikes occur more often on some channels than on others. This seems not related to the speeds I get on the channel.
I really can't imagine that a router marketed as High Peformance router with superior speed and superior range is less stable than my old WRT54G router.
Is there something I can do to improve stability of this router?
View 5 Replies
View Related
Jun 26, 2012
My WAG120N router has stopped working completely. None of the Ethernet ports or the wi-fi signal button is lit,power light continues to blink for 10 odd mins and then comes to a rest. Tried to login to admin portal without any success, tried to reset it pressing the reset button in the back without any success.Tried the 30-30-30 reset method without success too.
View 3 Replies
View Related
Dec 20, 2010
My Linksys WRP400 router has stopped working. power led blinks red and orange - phone led 1 and 2 light green - wifi connection not work - ethernet LAN connection not work - ethernet WAN connection not work - router now work in bridge mode - factory reset using Reset switch not work - connected analogue phone not work I try dump traffic using ngrep on LAN and WAN port but no packet comes from the router.
View 2 Replies
View Related
Oct 30, 2011
I have a linksys E3200. Today I got disconnected and when it reconnected it stated that the network was changed to just network and not my usual network name. I was having connection issues with the network disconnecting me and reconnecting me. I uninstalled the cisco connect software. I contacted support who told me to restart the router and modem, which I did. After reset I tried to reinstall the software. Cisco Connect likes to insist to do the installation wirelessly but my laptop can't find the router during installation to complete it. My router is essentially a glorified wire connecting my computer to my modem now.
View 2 Replies
View Related
