Linksys Wireless Router :: WAT54G - Map Which Shows All Users On Network
Sep 17, 2011
I purchased my WAT54G a couple of years ago when I added a laptop, I have my desktop which is connected to DSL and a wireless printer and my laptop.A neighbor told me that I should secure my network as he has used it when his system went down. My son had added a P/W when we first set up the router.I have since found the NETWORK MAP on which shows all the users on the network and half my street is on there.I have again added a P/W how do I know if its SECURE?
View 2 Replies
ADVERTISEMENT
Feb 18, 2013
I'm not sure why the guest net work is unsecured. I would have thought that would not be an option but it is unsecured. How to secure the guest network [2.4 GHz]? Also when I view the guest list some devices stay displayed whether they are in the vicinity or even turned off. That adds to my paranoia with the guest network being unsecured. I also can't edit the screen names to know who the device belongs to like is available in "my devices", forcing me to keep a MAC address list.
View 2 Replies
View Related
Nov 7, 2011
I'm having a networking issue that I cannot resolve.My DirecTV HD DVR receiver (HR21-700) shows a working connection to both my network and internet. However, the STB services port (range of 27161-27192) will not connect through my router (linksys E4200) automatically or manually (Dtv error code 301). By connecting the receiver directly to my modem, the STB services port will connect as it should. I also have a XB360 (LAN), BluRay Player (LAN), two PCs, & Wireless Bridge connected with absolutely no issues. Each are manually configured with a static IP and the proper ports forwarded.I am STUMPED and FRUSTRATED to say the least.Other than the manual setup of these devices, my networking knowledge is not very broad.Are there any settings or configurations that I may be overlooking?The uPnP is enabled, NAT is enabled, and all firewalls are turned off.
View 6 Replies
View Related
Mar 2, 2013
With my old netgear router I could see and share files on my kitchen PC from the office PC but with the WRT54GL I can't.
I have a printer with a static IP that both PC's can see.
View 1 Replies
View Related
Jun 14, 2012
I am grudgingly forced to allow certain people to use my wireless router connection. I just found out that these users are able to see a display of all the devices and computers attached to the router and network. This isn't a priviledge I'd like them to have. I'd like them to only be allowed to surf the internet - and leave it at that. I use WEP with a 26 digit code and each user has been given the code.)
View 5 Replies
View Related
Aug 13, 2012
I've got the E2000 at home for our private network.
We are three guys sharing a flat. We have personal laptops, work laptops, mobile phones, games consoles, tablets etc that connect to the internet.
Problem is that when someone downloads stuff, the speed is slow for the rest of us. So i was hoping i could set up something like three "channels" so each of us could have the same download speed, ie 1 mbs each regardless if others are using the network at the same time. And then maybe a guest network for all the mobiles and tablets etc. MAC filtering for access for our personal laptops should work.
We have a 20mbit cable network line.
Can i do all of this on the E2000 and how?
View 5 Replies
View Related
Feb 15, 2013
I am a powerbook G4 user, Mac's wireless is good so far.OSX 10.4.11 and when I am using E1000 extender, often the admin page shows up automatically like 192.168.1.1 and asks me to log in and once I log into the admin page, of corse show up the admin page.So, all my other internet pages are gone every time.Only shows the admin page.It does not happen with windows PCs.
View 1 Replies
View Related
Nov 24, 2012
I formatted my new 3TB External hard drive on my computer and it shows close to 3TB space. Now when I hook it up to EA6500 router, it shows on 746.51 GB total. I have latest firmware installed.
View 8 Replies
View Related
Mar 6, 2013
I have an EA 4500. Tonight I was trying to see what devices were connected. The window shows 0 devices connected, although about 20 devices are connected and working. When I click on "Devices Connected", I get the spinning wheel, and after multiple attempts by the application to list devices, I receive a message that the application does not work. I have the latest firmware installed. This is a recent issue. I have not made any changes to network configuration, nor to any of the devices that all have internet access. I will note that I did not set up a separate SSID for each band. But that did not seem to be an issue in previous months. I also cannot access the router ui from my windows 7 desktop. I can access the abbreviated ui through my Android phone. I tried connecting through smart wi-fi and by ip of the router. I just get the endless spinning circle of dots. I am running Windows 7 all up to date. All drivers are up to date.
View 7 Replies
View Related
Jun 17, 2012
I am trying to find out what devices are connected to my router. I have had some illegal downloading from my IP address but it has not been done from my computer. It is showing in Cisco Connect that I have 15 devices connected, I should have no more than 6 devices connected so trying to figure out who is connected on my computer.
View 9 Replies
View Related
Feb 15, 2012
I could get a list of clients on the E3200 wireless (or wired) ports. I have my E3200 setup as a WAP LAN-LAN off a switch and it is not the DHCP server on the network. I can see a list of MACs on the client list, but no client names and no IP addresses. They are definitely named and show up on the WRT54GL (DHCP and NAT) as devices
View 5 Replies
View Related
Dec 1, 2011
why my SSID still displays even though I have the SSID Broadcast "Disabled" for 5 GHz and 2.4Ghz configurations. The name of my network shows full signal strength and a lock next to the name but I was under the impression if I have disabled the SSID broadcast it shouldn't show up at all and would force a user to manually input the network name when trying to connect to it. I have the router configured to only allow certain MAC addresses wireless access as well. Router is running Firmware Version: 1.0.03.Also, my primary computer my iMac running 10.7.2 boots up or is brought out of sleep mode I constantly need to go up to the top of my screen and re-select my network.
View 4 Replies
View Related
Jul 7, 2011
I recently purchased a Cisco-Linksys WRT54GL Wireless-G Broadband Router from Amazon. The specs indicate it's Linux based: [URL] I checked other sites, and found the same claim: [URL] and [URL],But, to my dismay, when I was configuring and viewing the logs of the device.
View 3 Replies
View Related
Jan 27, 2012
Just got an E2500 and installed it with no problems and it was working correctly for 1-2 days. This evening the signal strength of my SSID dropped to LOW and a new SSID now shows up with full signal strength. It s not an SSID from any of my neighbors and from checking several forums it appears this is known problem.
View 2 Replies
View Related
Jun 6, 2012
I've got an apple Airport Express and have managed to set it into my network. Airplay works on both Itunes and my phone. However after 10-15minutes the Airplay drops out and the network map shows that the airport express is 'offline'. however the airport express LED remains showing it still have connection to the network. The only way to get it back is to reset the AE. The apple forum has lots of people stating the same problem with WAG120n routers.
-Router Firmware V 1.00.16
-Airport Express firmware version 7.6.1
-windows Vista
View 2 Replies
View Related
Feb 6, 2012
May I know how to manage users using E1200... I've been trying to disable the internet to those intruder but I can't so I change my pword again and again.
View 3 Replies
View Related
Nov 29, 2011
I have a WRT160NV3. When more than 1 member of the family is using a device it gets really slow. For example, we have 3 laptops and a PS3. When the PS3 is being used for online play and someone gets online to watch videos, etc it is extremely slow. Is there an update to the router or do I need to upgrade?
View 9 Replies
View Related
Sep 2, 2011
After Irene, we kept power and cable, but our internet went down, or so we thoughtWhen we plug the Ethernet cable from the modem into the computer, internet works fine (I can post this, after all), but when we plug the cable from the modem into our Dell TrueMobile 2300 router, our network appears as "Local Only." The phone cable thing is plugged from the wall into the modem, and the ethernet cable goes from the modem to the router, as it has been for years.
View 7 Replies
View Related
Nov 6, 2011
I have a Arris DLS with 12 Mbps Download and when I Connect my laptop directly I get the same speed as 12 Mbps but when I do the speed test with my linksys I get only 5 Mbps. How to upgrade to the new WRT54GL or WRT54GS?
View 1 Replies
View Related
Oct 9, 2012
As of last night my router has been producing slow connectivity when multiple users are connected to it, but it's perfectly fine when only one user is connected. I am on a laptop myself, but we also have a second laptop and a desktop where the modem and router are set up. I have upgraded the firmware so that is up to date. We have Comcast Fiber Optics so my internet speed is normally quite fast even when all of my computers are connected.
I am using DHCP Configuration. My Channel Width is set to 20 MHz and I am using Channel 11. The Security Mode is set to WPA Personal. I had it on WPA2 Personal but I read that changing to WPA Personal might work and so far it doesn't seem to have done anything. I set the Beacon Interval to 50, Fragmentation Threshold to 2304, and RTS Threshold to 2304. Everything else is set to the default factory configuration.
Just today I received a notice that said "Windows has detected an IP Address Conflict", but ever since I reinstalled the Firmware it hasn't come back. I've rebooted both my laptop and the desktop to confirm it hasn't come back as well. I've tried everything that I could think of including reconfiguring my router and restarting my modem as well.
View 6 Replies
View Related
Dec 14, 2011
I have a file server running windows 2003 and five computers (1 windows 7, 4 windows xp-sp3).There are two shares on the server.When the router is setup with wpa2, three of the windows xp machines will have problems with mapped drives. Directly after the drives are mapped, everything works, but 10 or so hours later, users can no longer access these mapped drives and there is no way to reconnect them it seems.The other two machines (windows 7 and one windows xp machine) have no problems whatsoever.
The only thing that the three computers have in common is that they are also sharing a printer (an hp j4680) attached to one windows xp machine (not the server).If I set everything to wpa, everything works fine, but of course my wireless network speeds drop to 56mbps.
View 4 Replies
View Related
Jan 1, 2013
My Hp laptop does not shows the wireless adapter in my network and sharing folder how can i fix it? i cannot connect on my wifi because of it .
View 1 Replies
View Related
Nov 6, 2012
I recently build a Frankenstein desktop, or at least that's what I'm calling.I started out replacing the motherboard in a HP Pavillion p6130y desktop.After some research I found that the stock motherboard as pretty outdated so I decided to go aftermarket.I wanted to replace as little as possible but now the only original parts are the dvd drive and network card.The network card has to screws on the back to attach an antenna and is a PCI1x card.
I now have a problem where after installing the card and Windows 7 Professional , I can see the list of available wireless networks including my own.But, I cannot connect to any of them even though my own network has full signal strength.
View 2 Replies
View Related
Aug 23, 2012
I am connected wirelessly on my laptop to my DIR-655 (D-Link) router. There is something weird going on to me in which is shows I am connected to two networks, one my home network clearly identified. The other one a "public network" listed as unidentified, all on one wireless connection. I run Windows 7 SP 1 32-bit. I would like somehow to merge or remove the second one from the listing.
View 1 Replies
View Related
Nov 29, 2012
when I hover my mouse over my signal bars it says I am connected to a network named 'home-9C78' but when I click to bring up my list of available networks, it says I am connected to a network named 'Reshiram' Reshiram is the name of my network and there is NO 'home-9C78' ANYWHERE in the list!!! I don't know where my computer gets this home-9C78!!! and I NEVER ever connected to a network with that name!!! it is supposed to be 'Reshiram
View 2 Replies
View Related
Dec 20, 2012
how do I block IP/Internet Adresses for ALL users without adding the sites manually per user in the Parental Control panel? I want to block a certain IP/internet adress for all users but can't find this feature within my EA6500 anywhere?Is this a firmware bug? Has linskys forgotten that some sites want to blocked for all users and how do I do it all in one?
View 1 Replies
View Related
Nov 8, 2012
I had a small issue wherein my pc would lose ALL network connection to my pc, but the network icon showed that i had full signal, no issues. as long as i sign in on skype before the internet drops, it will stay on after it drops and i can still chat and everything, and to fix, i had to restart my pc. well, it had gotten better.And now its back, and WAY worse then before. skype doesnt have time to sign in upon bootup, and wont connect. steam wont connect, NOTHING will conect, but i still show full signal and no yellow mark or anything! I have done the following:
reboot(derp)
reinstall drivers
move wifi adapter
disable IPv6
[code]....
and no, i am not able to reinstall windows. I am going to try (soon, i am not able to just yet) direct ethernet to my router. all other PCs in the house are working perfectly, even this one that is slow as crap because it has windows 7 and is designed for windows XP.
View 11 Replies
View Related
Mar 25, 2011
I have RV082 in many locations and it is working fine.One location I just starting to have problem with packet lose (50 to 60 %)I ping between two location which i am having problem.Gateway to Gateway shows no lose on packet (reply with 20ms avg.)but router to router will lose packet 50 to 60 %.
View 1 Replies
View Related
Oct 15, 2012
I Have asa 5520 with the code 8.0, the mem shows 94% and the CPU shows 85%
View 5 Replies
View Related
Jul 26, 2012
I have a E2500 router and just got this AE3000 adapter. Thought that would bump up the wireless signal for using my laptop at the other end of the house about 75 feet from the router. The new E2500 Wireless N has been a big improvement. The AE3000 installed perfectly and shows up as working properly. It's just that the signal strength on my laptop shows 2 bars and the signal strength for the adapter shows 2 bars.
View 2 Replies
View Related
Aug 11, 2012
I'm trying to see if I can fix my friend's NAS which apparently has some pretty important data on it that wasn't saved anywhere else. They actually had the Geeksquad look at it and they've come to the same conclusion I have so far, but I figured I would ask the internet before I gave the thing back to them and said Geeksquad was right.
Anyways, they have this 5 drive RAIDed NAS which apparently just stopped showing up on their network. I borrowed it from them to see if I could figure it out. It turns on just fine and my router assigns it an IP address, but the IP address just takes me to a blank LaCie dashboard screen. It's weird because it's clearly running it's web server because it's just a gray background with an empty white box and "(c) LaCie 2010" at the bottom. No content at all.
Additionally, I tried installing the LaCie Network Assistant on my home computer and it says it cannot find any network disks. I've tried the "wake up a device" where I enter the mac address, but that doesn't do anything.
All the lights are solid blue on the front and over all the drives so it doesn't appear a drive has failed or something. Even so, that wouldn't really explain the blank dashboard right?
View 1 Replies
View Related
Apr 8, 2011
designing a wireless network for an apartment complex. The complex is shaped like like an rectangle, fairly small, maybe 100 feet on the ends and 300 feet long on the sides. There are 130 people that we are assuming may have about 3 devices each that they will connect to the wireless network, potentially simultaneously, as this is in a college environment. We have plenty of bandwidth and down/up speed. We are running 30 megabit down and 10 up. I am planning on having a router with two access points centrally located in an apartment and extending the network out with antennas in each direction from the access points with Omni directional antennas. The Access points that I am planning on using are Cisco WAP200 with maybe a Linksys router, as the router should not have more than 10 connections on it. I need something that will not crash after 10-15 users connect to it because it jams up from overload.
View 3 Replies
View Related
Dec 27, 2012
I have an E4200 router with 3 WET610N access points. I did the firmware update on the router, E4200, about 2 weeks ago so my son could use his xbox when he got home after 4 months of being away. Everything seemed to work OK as far as I could tell....but when he went to sign into xbox live and watch Netflix, it will load to 98% and stop. A friend of his came over with the new Slim xbox 360 with built in wireless and it will connect fine on its own, if we hook up one of the 610N's to it, it will load to 98% on Netflix and stop again with error code R8152. Both of my older xbox's will hook up and play on xbox live, just not work with Netflix.I also noticed, it shows the WET610N as a hard wire on xbox and will not search for any wireless networks, I have 2. The newer Slim xbox360 will search out both networks on its own if you allow it to use its internal wireless. This only happened since the firmware update.
View 3 Replies
View Related
