Linksys Wireless Router :: EA6500 How To Block IP / Internet Addresses For ALL Users Without Adding Sites Manually

Dec 20, 2012

how do I block IP/Internet Adresses for ALL users without adding the sites manually per user in the Parental Control panel? I want to block a certain IP/internet adress for all users but can't find this feature within my EA6500 anywhere?Is this a firmware bug? Has linskys forgotten that some sites want to blocked for all users and how do I do it all in one?

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: EA6500 Multiple IP Addresses On Internet Interface?

Jan 23, 2013

I have verizon fios business line with 5 static IP addresses and am configured for ethernet wan. I can use EA6500 as the router instead of using Verizon's own router, however I can't figure out how to assign all 5 static IP addresses on internet interface. I have already assigned first IP to  internet interface but don't see a way to add more IPs either in internet interface or from NAT section where I can create static NAT.
 
Is this even possible with EA6500? If so, how?

View 3 Replies View Related

Linksys Wireless Router :: WRT54GL - Block Sites Like Facebook During Workday But Allow Internet?

Jan 15, 2013

I want to block sites like facebook during my workday but allow the rest of the internet.
 
The attached settings block facebook as desired during the filter times but after 6:30pm the filter expires and the entire internet is blocked (not just facebook). All of my browsers act as if they are hanging and won't load pages until I disable the filter.
 
I've also tried creating two different filters (one at a time). The first allowed full internet access all the time and the second allowed access the opposite times of the work filter. But to no avail.

View 2 Replies View Related

Linksys Wireless Router :: EA6500 NAT Multiple IP Addresses?

Jan 23, 2013

I currently have my EA6500 behind verizon fios router. I have 5 static IP addresses assigned to FIOS router, however the machines I want to connect to are behing EA6500. It's a dual NAT scenario:
 
Public IP - FIOS Router - 192.168.1.0/24 network - EA6500 - 192.168.2.0/24 network
 
What I would like to do is for each public IP address, I would like to forward traffic to a particular host on 192.168.2.0 network. I can easily configure FIOS router for static NAT and assign one internal IP (from 192.168.1.0 range) for each public IP. However, I don't see a way to assign multiple IPs from 192.168.1.0 network to EA6500 internet interface.
 
I don't want to use EA6500 as a bridge as it will pretty much reduce my EA6500 to a very expensive GigE switch.
 
Is this possible? Or should I replace it with something more useful like a business router? This is for my home so I would like to avoid buying an expensive business router.

View 1 Replies View Related

Linksys Wireless Router :: EA6500 - Multiple MAC Addresses From A Single IP?

Feb 11, 2013

I just bought a Linksys EA6500 (AC 1750). Now after a week, seems to stop rresponding at times and I am get 5+ MAC Addresses from 1 IP address. I have only one NIC installed and it is configured to have a static IP.
 
See attached screen capture. ( Server-PC, IP: 192.168.1.130)

View 8 Replies View Related

Linksys Wireless Router :: Ea6500 Reserved Dhcp Addresses For All The Boxes

Sep 28, 2012

I have my other XBOXs connected to a 24 port switch but the one connected to the ea6500 directly gives me this moderate NAT issue. I thought this new router would be an upgrade to my old dlink but so far I get a new problem every day.I have reserved dhcp addresses for all the boxes and set up port triggering for the ports listed in several guides. But what else do I need to do? Is it likely I got a bad router?

View 2 Replies View Related

Linksys Wireless Router :: E-2500 How To Block Additional Sites

Dec 27, 2011

I recently purchased an E-2500, but notice that in parental controls I can only block 6 or 8 websites.  In my WRT54GS I could just create additional rules and they would work.  But in this device I am limited on the sites that can be blocked per device.  How I can block additional sites?

View 2 Replies View Related

Linksys Wireless Router :: Block Imessage To Specific Clients On EA6500

Dec 4, 2012

I was wondering if it was possible to block imessage to specific clients on the EA6500.These are the ips apple uses for imessage I need to create a firewall rule that blocks these ips from reaching a specific client on the network.
 
[code]....

View 1 Replies View Related

Linksys Wireless Router :: Block Individual IP Addresses With A E2500?

Mar 12, 2013

I have an E2500 wireless router and I am trying to block some incoming IP addresses.  I'm trying to prevent a certain ISP from throttling my access on certain websites.  I can do it on individual computers but we have a bunch of devices on this network

View 1 Replies View Related

Linksys Wireless Router :: Way To Block A Range Of IP Addresses In E2500

Feb 24, 2012

Is there a way to block a range of IP addresses in the E2500? Like parental controls but with IP addresses instead of URL..

View 2 Replies View Related

Linksys Wireless Router :: EA6500 / Enable Parental Controls Or Access Restrictions To Block MAC / IP Address?

Mar 13, 2013

I have been looking into this router, I would like to know if I can enable Parental controls or access restrictions to block a MAC or IP address; from 03:00 AM - 06:00 AM ?Instead of Midnight to 6:00 am.My E4200 works just fine, Just would like to know if the EA6500 Can do that ?

View 7 Replies View Related

Linksys Wireless Router :: WRT54GL Manually Power-cycle To Get Internet Back

Aug 15, 2012

We have a Model WRT54GLWireless-G router. At least once a day it loses it's internet connection. All computers that are wired to the switch that is connected to it lose their internet as well as any wireless devices. I have to manually power-cycle the router to get internet back.

View 9 Replies View Related

Cisco Routers :: RV042 When Updating / Adding Mac Addresses / Table Is Always Sorted By IP Addresses

Oct 8, 2012

In  setup for old RV042 (V1),  when updating / adding Mac addresses, the table  is always sorted by IP addresses. But in the new oneRV042 (V3) I have, even with latest firmware 4.2.1.02  the list  is random, thereby increasing the chance of user entering DUPLICATE IP addr  with diff Mac addr.  That will result in conflict.If the firmware sorts the DHCP entries by ip addresses, user would be  able to catch duplicate ip errors even if the system does not flag the  errors.  All Cisco smart engineers can you all get the dhcp entries SORT by  ip addresses.

View 2 Replies View Related

Linksys Wireless Router :: EA6500 Not Connecting To Internet?

Jan 14, 2013

I am running the most recent firmware 1.1.28 released on Jan 2nd(ish) 2013 and if I try and access or configure my external Segate Freeagent 1.5 GB it essentially crashes my router whereby I cannot reach the internet nor the Admin console. I have to power cycle to be able to connect?

View 9 Replies View Related

Linksys Wireless Router :: Ea6500 No Internet Connection

May 5, 2013

I recently bought the ea6500 router to upgrade from my last one. For the first few weeks, it worked ok though the wireless range often became unreliable if doors were shut. The biggest problem I'm having right now is that the internet has completely stopped working - both wired and wireless. I have hooked my laptop directly into my modem, and it has a good internet connection. However, when I plug my laptop into the router, I get no internet connection at all, and it is not currently producing a Wi-Fi signal at all. Instead, the power light keeps blinking rapidly. I have tried rebooting the modem and router several times and still no internet. Just the same blinking light. I can't even log into the smart wifi page to check the status of the router. My computer tells me there is no IP address for the router.

View 2 Replies View Related

Linksys Wireless Router :: EA6500 Can't Connect To Internet

Sep 23, 2012

Got my new EA6500 on Friday.  I can't connect to the internet with it.To start with, I have a cable modem that is connected directly to my desktop to verify I have a good internet connection.  I do (can browse the web).  Then, I disconnected the cable from my desktop and plugged it into the "internet" port on the EA6500.  With a new cable, connected one end to the desktop and the other end to Port 1 on the router.  Now I no longer have an internet connection.Went throught varioius sequences of rebooting the computer / router / cable modem with no change.
 
Then disconnected the cable that was pugged into "internet" on the router and plugged it back into the desktop -- internet service restored.  So, I have a good connection to the web.
 
When I had the router in the config, I was able to go to IP 192.168.1.1 and see the routers setup screens, so the connection between the computer and the router was good.I also was able to try the wireless on the router by connecting my iPhone.  Iphone connected to the router (joined the network), but couldn't get to the internet.
 
It's as if the internet connection withing the router is broken.I even did a reset of the router which didn't work. Using this new router via hard wires should work out of the box with no setup necessary.
 
I did also try running the install software to see if it made a difference.  Setup detected no internet, but I selected to continue on without the internet connection.  Software guided me to setting up my wireless network (choose SSID, etc) and that completed.  Was able to connect with my iPhone to the newley found SSID, but still no internet.

View 9 Replies View Related

How To Block Specific Sites With Router

Oct 31, 2011

I have a TL-WR740N Wireless Lite N Router and i want to block specific websites with it.

View 4 Replies View Related

Linksys Wireless Router :: Internet Speed Test EA6500

Feb 18, 2013

I've a problem with the internet speed of my ADSL line(20Mega). Now I've the following components: D-link DSL-320 B (modem)+Cisco Linksys EA6500. If I start a Speed test the result its only 4M in download, while i remove the router and i connect my Pc directly to modem, the speed test results its 13-14M.

View 3 Replies View Related

Linksys Wireless Router :: EA6500 PPPoE Internet Connection Not Working?

Nov 29, 2012

I recently buyed a Linksys EA6500 wireless router. I accessed [URL] to access the settings interface of the router. Went to "Connectivity Internet Settings" and chose type of the internet connection as PPPoE. Entered the username and password, clicked ok.
 
No internet access.

View 9 Replies View Related

Servers :: Trace Users Activities And Block Internet Connection?

Aug 26, 2012

We've got Workgroup LAN at our office and the Server is configured by the OS “Windows Server 2008 R2”. Most of the users use OS Windows XP-Service Pack-2. Now, I want to see the Internet surfing status/activities done by any particular user/users at any time from the Server. You know that, some people enter into restricted sites which impose severe negative impact on the network. If I could trace from the Server any user of doing this, I shall block his Internet connection from the Server.

View 1 Replies View Related

Linksys Wireless Router :: E4200v2 Cannot Access IPv6 Internet Or Sites?

Feb 5, 2012

I just upgraded my  old  WRT54G to a E4200v2 with firmware 2.0.36.126507. I installed it using the Cisco Connect CD. At first it seemed OK, but then I noted that I cannot open (or takes forever) many websites, in particular those requiring Adobe Flash Player to view. In addition, it appears that access IPv6 Internet or sites is impossible, even though IPv6 is enabled in the GUI.  Is there anything I am missing in the configuration/set up of the router?

View 9 Replies View Related

Linksys Wireless Router :: EA6500 No Internet Connected To Verizon FIOS Actiontec Router

Jan 20, 2013

I connected EA6500 internet port to actiontec router provided by Verizon fios. I don't have any other way to connect as FIOS connection is coax to actiontec modem. I must take a drop from actiontec to internet port on EA6500.
 
With that said, I can't get EA6500 to work, it keeps saying no internet. The only way I can get it to work is when I set it to bridge mode. This makes my EA6500 a dumb switch/access point. I didn't spend $200 for a switch. I need to use advanced features offered by this router but I can't until this problem is fixed. I made sure I am running latest version of firmware (1.1.28.146856).
 
I have reset my fios router as well as ea6500 to factory defaults multiple times.

View 9 Replies View Related

Cisco VPN :: Adding Users On 881-K9 Router Side?

Apr 7, 2013

A client of ours has an 881-K9 router that they have configured a VPN on, this was setup and configured prior to my joining the company.  This client now needs to add more usernames to the VPN on the router side, and I've both searched here, and googled for how to add users to the VPN on the router, the only thing that comes up is adding clients (from the client end PC), and nothing to show how to create the users on the CLI from ssh on the router itself. 

View 1 Replies View Related

Linksys Wireless Router :: E2000 - Slow Internet After Adding It

Jul 24, 2012

I recently bought a E2000 wireless router. After my internet was slow for a few days, I figured out that the router was slowing down my internet.
 
Here's what happens: When my PC is connected directly to the cable (I am connected to a university network, so no modem), everything is fine and a speed test (url...) shows the speed as 400 Mbps(200 Mbps upload) or more.Once I add the router and connect my PC through the router, the speed test result drops to less than 200 Mbps(100 Mbps for upload). I tried this several times, testing with the same server.At the same time, when I try to open pages, "Sending request"(Chrome) takes for ever! sometimes it stays at "Sending request" for 15 seconds. This happens even google.com, so it's not the Web server.

View 9 Replies View Related

Linksys Wireless Router :: E2000 Block All Internet Access?

Mar 12, 2012

E2000 about a years old.One of the rule is to block internet access from 1am to 4am for certain internal IPs.Working fine until a week ago. Once the time kick in, the E2000 will not route any internet access for any internal IP until the unit is power off and power on reboot.If that rule is disabled. then the E2000 will route all days and nights with no problem.Updated firmware to 1.0.0.4 already.I replaced the WRT45 because of the same problem a year ago. Now just about a year, this E2000 keeps blocking all traffic.

View 1 Replies View Related

Linksys Wireless Router :: WRT610N Shuts Down And Needs To Be Manually Powered Up?

Aug 23, 2011

I recently upgraded my WRT610N to Firmware Version: 2.00.01 and now the unit powers down on its own after a few hours.  Are there any known issues with this firmware?Is there any way to roll back to the previous version of the firmware?

View 4 Replies View Related

Belkin Routers :: Way To Block A Specific List Of Sites With N750 DB Wireless

Dec 17, 2012

I have a Belkin N750 router which I purchased because the box said it had filtering options. I didn't realize that the filtering was only sites that Norton kept track of. There are certain adware sites I know about that I would like to filter. Possible with this router?

View 5 Replies View Related

Linksys Wireless Router :: WRT54GL - Unable To Block Internet Access?

Sep 1, 2011

i want to block all internet access on all my computers from the time range of 9 PM to 8 PM. Yes, that gives 1 hour of internet access per day. However, it seems that there are certain rules of the router that won't let me do this. It seems I can't make 2 different policies for PC's within the same IP range (192.168.1.0 to 192.168.1.254) , it gives me the error: "The values you entered are invalid. Please try again."every time I try to do so. And when I try to give the time range from 9 PM to 8 PM it gives an error stating that the end time must be bigger than start time. I am using the WRT54GL with firmware v4.30.7.

View 5 Replies View Related

Linksys Wireless Router :: E4200 Internet Access Policy - Can't Block Facebook

Nov 20, 2011

On E4200 Firmware Version: 1.0.03, I managed to successfully set up "Internet Access Policy" (not the "Parental Controls") to set up the times when internet access is disabled for various IPs on my network.
 
But I could't setup a policy to block facebook.com. What I am doing wrong? See the attached screen shot. I did click the "Edit List" and apply this polity to the IP Address Range 192.168.1.2 to 192.168.1.254.

View 9 Replies View Related

Linksys Wireless Router :: E1200 - Parental Control Password And Block Internet Access

Oct 2, 2011

Why does my E1200 forget my Parental Control Password? This happens almost weekly and I have to use the "forgot password" option. It asks my security question, I answer it and set the new password to the same password it keeps forgetting. Why does this happen? Also, is there anyway to have total 24hr control on the Block Internet Access?

View 4 Replies View Related

2wire 2700hg-d Router / Block Or Monitor Porn Viewing Activity Of Users Through The Router?

Jan 19, 2013

I have a 2wire 2700hg-d (Qwest/Centurylink) router serving 3 or 4 computers. Is there a way I can either block or monitor porn viewing activity of users through the router?

View 2 Replies View Related

Find Ip Addresses Of Contacts In Social Network Sites?

Jan 10, 2012

How can I find out the ip addresses of contacts in social networks

View 2 Replies View Related

Cisco VPN :: 5510 Multiple VPNs Between Two Sites Using Different IP Addresses

Sep 9, 2012

I would like to create two site-to-site VPNs, one for data and one for VoIP, between the same sites. One end is an ASA 5510 and the other is a third party firewall. Is this possible if I use different sets of IP addresses for each tunnel?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved