Linksys Wireless Router :: Block Imessage To Specific Clients On EA6500

Dec 4, 2012

I was wondering if it was possible to block imessage to specific clients on the EA6500.These are the ips apple uses for imessage I need to create a firewall rule that blocks these ips from reaching a specific client on the network.
 
[code]....

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: Block Website With Specific Time On Wrt610n?

Jul 3, 2012

How to block a specific website with a specific time (office hours) for example "facebook" I want to block facebook within 8AM - 12Noon then 12-1 they can access the website, then 1-4 block again the website .

View 3 Replies View Related

Linksys Wireless Router :: EA6500 / Enable Parental Controls Or Access Restrictions To Block MAC / IP Address?

Mar 13, 2013

I have been looking into this router, I would like to know if I can enable Parental controls or access restrictions to block a MAC or IP address; from 03:00 AM - 06:00 AM ?Instead of Midnight to 6:00 am.My E4200 works just fine, Just would like to know if the EA6500 Can do that ?

View 7 Replies View Related

Linksys Wireless Router :: EA6500 How To Block IP / Internet Addresses For ALL Users Without Adding Sites Manually

Dec 20, 2012

how do I block IP/Internet Adresses for ALL users without adding the sites manually per user in the Parental Control panel? I want to block a certain IP/internet adress for all users but can't find this feature within my EA6500 anywhere?Is this a firmware bug? Has linskys forgotten that some sites want to blocked for all users and how do I do it all in one?

View 1 Replies View Related

Linksys Wireless Router :: EA4500 - Block Specific Site Based On Keywords In Webpage Address?

Apr 2, 2013

I have an EA4500. I am trying to block a specific site based on keywords in the webpage address. how to get the EA4500 to block sites with based on keywords.

View 1 Replies View Related

Linksys Wired Router :: RVL200 Block Specific LAN / LAN Traffic

Jul 25, 2011

if the firewall rules in the RVL200 work for inter LAN routing as well as LAN<->WAN?  I need 2 separate networks in a house, 1 for business 1 for family, and I want to only allow my IP on network 1 (family net,10.0.0.0/24) access to network 2 (business net 10.0.1.0/24).  I want this as if I change rooms were a access point for business is not available I can use the home net and specific IP to access certain business net IPs.   I saw you can turn inter vlan routing on or off, but it wasn't clear on firewall rules.know of a similar router in cost but with gige instead of 100Mb ports?

View 1 Replies View Related

Linksys Cable / DSL :: WAG160Nv2 / Block Specific External Ip Address?

Jul 8, 2011

I have a WAG160Nv2 and I want to block specific external ip addresses from trying to get at our server that uses the WAG160Nv2 as an internet gateway. It's not immediately obvious if this can be done from looking through the config pages.

View 4 Replies View Related

Linksys Cable / DSL :: WAG120N Internet Sharing For Specific Clients

Nov 23, 2011

is it possible to moderate sharing bandwitch or/and traffic internet over wireless via WAG120N for some specific client? is there any configuration inside modem OS?without any external software such as Cyberoam or... that they need Always-On PC to work!

View 3 Replies View Related

How To Block Specific Sites With Router

Oct 31, 2011

I have a TL-WR740N Wireless Lite N Router and i want to block specific websites with it.

View 4 Replies View Related

Routers / Switches :: Which Router Can Block Specific Web Pages

Apr 4, 2012

I dont mean a website like facebook.com, but i want it to block an individual page,such as a profile page, yet still be able to access the rest of the site? Again i'm not after facebook settings etc, but i want to restrict access to certain webpages within Lan.

View 2 Replies View Related

Belkin Routers :: Way To Block A Specific List Of Sites With N750 DB Wireless

Dec 17, 2012

I have a Belkin N750 router which I purchased because the box said it had filtering options. I didn't realize that the filtering was only sites that Norton kept track of. There are certain adware sites I know about that I would like to filter. Possible with this router?

View 5 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8960N Sending Pictures Via IMessage On IOS?

Nov 21, 2012

Region : UnitedKingdom
Model : TD-W8960N
Hardware Version : V1
Firmware Version : 110620
ISP : BE Broadband

I have an issue sending pictures via iMessage on iOS.

View 5 Replies View Related

Cisco Wireless :: How To Block P2P Traffic Of Clients Connected To Same SSID On WLC 4400

Feb 2, 2010

I use two wlc 4400 (4.2.x version) with a mobility domain and one ssid, both wlc are connected to a cisco l2 switch infrastructure. On the wlc I use the p2p blocking action 'drop' [URL] to isolate the clients from each other. Does only unicast traffic is blocked or also multicast and broadcast traffic like arp requests?Concerning blocking p2p traffic of clients connected to the same ssid but different controllers I found the following statement in the LAP FAQs [URL]

Q. In autonomous APs, Public Secure Packet Forwarding (PSPF) is used to avoid client devices associated to this AP from inadvertently sharing files with other client devices on the wireless network. Is there any equivalent feature in Lightweight APs?
 
A. The feature or the mode that performs the similar function of PSPF in lightweight architecture is called peer-to-peer blocking mode. Peer-to-peer blocking mode is actually available with the controllers that manage the LAP. If this mode is disabled on the controller (which is the default setting), it allows the wireless clients to communicate with each other through the controller. If the mode is enabled, it blocks the communication between clients through the controller. It only works among the APs that have joined to the same controller. When enabled, this mode does not block wireless clients terminated on one controller from the ability to get to wireless clients terminated on a different controller, even in the same mobility group.
 
what's the best practise to prevent this inter wlc client traffic? I already read about using acls on the wlc dynamic interfaces, or private vlans on the l2 switch vlans where the dynamic interfaces are connected to. Is it allowed to completely isolate the wlc from each other on these dynamic interfaces with acls or private vlans or do the wlc need to see each other on this interfaces (e.g. heart beat)?

View 19 Replies View Related

How To Block Specific Domains In Sonicwall

Apr 5, 2011

How do I block specific domains (pandora.com, etc.) in the Sonicwall? It seems like this would happen in the CFS but do I need a subscription for this? I don't want to subscribe to Sonicwall's filtering list, I just want to block a couple specific domains.

View 9 Replies View Related

D-Link DIR-825 :: Block Inbound Traffic From A Specific IP?

Oct 5, 2011

How to configure the 825 to block inbound traffic from a specific internet IP address ?i noticed an IP and MAC that i don't recognize that is listed as a connection to my NAS's media server ...i blocked it in the NAS configuration page, but i don't want any unsolicited traffic into my network.

View 3 Replies View Related

Block Access To Internet On Specific Time Intervals?

Aug 10, 2011

I have the Qwest/Actiontec Q1000 modem/router. I go to the ip address using my web-browser and open up advanced configurations -> access scheduler. I select a computer (and it automatically adds the MAC address) and then the days/times I want the internet to be accessible. However, when I click "add" (to add my internet allowance to the scheduler list) it just says 12:00 to 0:00, which is essentially permanently blocking the internet for that computer.

View 7 Replies View Related

Cisco WAN :: 1841 To Block Access To A Specific Interface

Feb 11, 2013

I have an 1841 between my firewall and the ISP.  Three interfaces - multilink to ISP, FA to my firewall, and FA to my inside network.  I use the inside interface for configs aand snmp access, etc.   Only my ISP-assigned fixed address block will get routed to the multilink by the ISP but I am nervous about the inside interface sitting on my LAN.   I know I can remove it, but if I keep it there, how can I set up an ACL so that all traffic from the multilink interface is denied to the inside interface?  I suppose another way to think about it that the inbound iface can only accept traffic from its own outside, not from the router.I think this is fairly simple but I don't want to knock down the traffic if I get it wrong.

View 8 Replies View Related

Cisco Firewall :: ASA 8.0(5) / Block Specific Url From Accessing Server In Dmz?

May 4, 2011

I have Cisco ASA 8.0(5) and I need to block specific url to acees my https server in dmz ?I read about websence technology, but I think it's not free right? Also I read abotu policy inspection map's but in my case is HTTPS not http ..

View 1 Replies View Related

Linksys Wireless Router :: Setting Up QOS On EA6500?

Dec 23, 2012

I would like to know how to setup QOS on the linksys EA6500 wireless router. I know about the media prioritization settings, however, thats not enough for me. I would like to setup upload and download speed limits for certain devices on my network, like, say 300kbps download for a certain device at all times.

View 3 Replies View Related

Linksys Wireless Router :: EA6500 Downgrade To 1.1.27?

Dec 13, 2012

provide me with the latest (or one) release of 1.1.27 firmware for the EA6500. I am deeply disappointed in the last firmware upgrade and due to security and sudden lack of certain, or let's say all, functionality in bridge mode I need to downgrade or wait for an upgrade where that's fixed, but most likely not soon, or ever. Where could I find the firmware downgrade.

View 2 Replies View Related

Linksys Wireless Router :: EA6500 Not Support WOL?

Dec 14, 2012

I use EA6500 I Don't find WOL OTL..

View 1 Replies View Related

Linksys Wireless Router :: Use Two EA6500 In Same Network?

Nov 3, 2012

I was wondering if it's possible to use two EA6500 in the same network, one as main router and the other as anacess point?

View 2 Replies View Related

Linksys Wireless Router :: DSL Modem To Go With EA6500?

Jan 29, 2013

I have an EA6500 which obviously has 4 Gigabit ethernet ports for my home network, but I need a DSL modem to get it working.What's the maximum speed current modems can supply from the Internet to my router, is there such a thing as a Gigabit capable DSL modem these days or am I dreaming ? Is it possible to even get Gigabit dowload speeds via DSL or would I have to go cable to achieve something like that ?My main concern is I don't want to buy a modem that will slow down or 'throttle' the capabilities of the new router I've just purchased or have I got the wrong idea ?

View 7 Replies View Related

Linksys Wireless Router :: Don't See Anything About VPN Pass Through On EA6500

Dec 30, 2012

Looking to upgrade my old G router to the EA6500.  I don't see anything about VPN pass through on the EA6500 or any linksys N router.  Is this feature something they no longer include?

View 3 Replies View Related

Linksys Wireless Router :: EA6500 Without Routing / Using WAN?

Dec 29, 2012

I would like to use the EA6500 in my network - but nor as primary router (or in fact routing at all). I would have thought, one could simply tell the device to use a particular gateway, but it does not seem to be easy. I have used many other home routers as combined switch/AP/USB-drive (latest a D-Link DIR-655), but the EA6500 seems very picky. The "easy" "Smart Wi-Fi" setup requires internet access through the WAN port - and that divides my home network, which then have two zones which cannot really "talk" to each other. Alternatively, I can reset the device and access it directly on the IP (initially 192.168.1.1). But then I can change only LAN and WLAN settings. Stuff like Guest Access, USB-devices etc. won't work. Do anybody have success with this device without using the WAN port and the DHCP server?

View 8 Replies View Related

Linksys Wireless Router :: EA6500 - Way To Get FTP To Work?

Nov 13, 2012

I have a new EA6500 and am failing at getting ftp to work.  I have updated the firmware.My ftp folder is on a Seagate USB Go-Flex drive attached directly to the router via USB.  I have set up shares which I can see and access via my computer which is attached to the router.FTP is configured to use port 21 and UTF-8.

View 9 Replies View Related

Linksys Wireless Router :: EA6500 NAT Redirection Bug?

Nov 20, 2012

I have a pair EA4500s that I am swapping out for a pair of EA6500s.  One EA6500 is a router.  The 2nd EA6500 is set as a bridge and us being used as an Access Point about 200ft and two floors above the main EA6500 router.  The two units are connected via DECA (200MB Ethernet over DirecTV cable - an alternative for others with a cable provider is called MOCA).  So, basically two EA6500s serving as two Access Points on opposite sides of the house and all wireless networks on different channels but all sharing the same SSID.  Everything works GREAT except for one unusual issue.
 
The issue is with wired or wireless clients.  If I try to use my PUBLIC address with port number to address a local client on the local network inside the NAT network the NAT redirection fails.  In other words if I use 172.16.16.8 for a local web cam while inside my network from an iPhone or PC all works great.  If I use the external public address, however, the connection times out.  If I pop out the EA6500 doing the routing/NAt and swap it with the old EA4500 with basically the same config as the EA6500 everything works again.  The EA6500 and the EA4500 are configured identical for the most part and with the EA4500 as the main router NAT redirection works great but with the EA6500 NAT redirection fails.  I have the firewall setting to FILTER NAT REDIRECTION unchecked so that's not the problem.
 
Seems very odd.... and only seems to happen with the EA6500..... the work around is to use the local IP address when the client is on the inside and the public address when on the outside, but what a pain that is....

View 9 Replies View Related

Linksys Wireless Router :: Reverse NAT On EA6500?

Oct 9, 2012

Any work around to enable reverse NAT or similar functionality on the EA6500? I recently upgraded from a Dlink that did support reverse NAT to my internal devices through a dynamic dns service. Now I have to know the IP address for all the devices.

View 1 Replies View Related

Linksys Wireless Router :: EA6500 Getting Different Ip Instead Of Default Ip

Nov 27, 2012

i setup my new EA6500 with the ethernet cable from my cable modem plugged into the EA6500, but with my old E4200 still switched on, but disconnected, i seemed to have ended up with a ip address of 10.250.27.47, not the 192.168.1.1 i was expecting, which i had with the E4200, my question is, is 10.250.27.47 something i should expect with the EA6500, or do i need to do a factory reset on the EA6500 and start again with everything else switched off as a precaution ?

View 6 Replies View Related

How Does Firewall Block Or Filter Traffic On Specific Port Or IP Address

Nov 15, 2011

How does a firewall block or filter traffic on a specific port or IP address?

View 1 Replies View Related

Block 1433 Port With Access List For Specific Ip Address?

Jan 2, 2012

I want to block the sql port access of my server to all except few of my ip addresses while access list on Cisco Router IOS how do i do that.

View 3 Replies View Related

Cisco Firewall :: 5505 Block Port 80 On A Specific Host In LAN

Apr 22, 2012

I'm using an ASA5505 (8.4(1)) and would like to block port 80 on a specific host in the LAN so machines in other remote LANs connected via VPN can't access this port on the host. Devices in the local LAN should have access to this port on the host. Here are the commands I'm using:
 
-access-list block_port extended deny tcp any host 10.20.10.20 eq 80
-access-list block_port extended permit ip any any
-access-group block_port out interface inside
 
These commands are not working as I would expect them to. When I browse to http://10.20.10.20 from a remote machine over the VPN tunnel I am able to access the host web server.

View 2 Replies View Related

Cisco Switching/Routing :: 4500 - Allow Only Specific Vendor Mac And Block Others

May 20, 2013

I have arequirement where in I need to allow only specific vendor made desktops/laptops to be connected to the switch and block the rest. Say I want only the HP made Laptops to be connected on the Network. and block all other vendors. such as dell, ibm etc.
 
 I am having Catalyst 4500 switches in My network. i tried using the mac access list using the permit and deny statement and then mapping the access list to the vlan access map and then filter using the vlan id. But this doesnt work on cat 4500....the same I tested for 2950 switch and it works perfectly. are there any restrictions on 4500 or any extra configuration has to be done.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved