I'm at my brothers house for a few months and trying to get my laptop connected wirelessly to his network. They have multiple computers and their laptops all are able to connect wirelessly. My laptop is able to connect via cable. It also gets a local connection wirelessly, just won't connect to the internet so I'm assuming it's a setting on my computer. It's a Linksys E3000 router. I have an HP G60-235DX laptop running Windows Vista Home Premium.
The internet at my parents house has recently gone on the fritz..the wireless router is a N600 Wireless Dual Band Router WNDR3400..The computers of the house are able to connect to it..But it does not allow internet connections..The 3 computers are an HP Laptop running windows 7.a Dell Dimension E521 Running windows 7 & and an older HP Walmart special running XP.They can connect to outside systems and through a wired connection to the Modem from Cable vision. They replaced the wireless router and the problem continues.Internet is capable by plugging directly into the Cable vision router,unfortunately do not have the cables to try through the Netgear router to test that out..
I have a TP-Link WA500G, routers are not allowed but other people have from eighbouring flats have set them up as I can see at least 3 now.I have set up a password and selected it to be a Wireless AP.Each room has it's own ethernet socket and that socket has a unique IP, Like 141.163.180.XXXDo I have to enter the IP that it is plugged into into any of the fields like gateway or in the DHCP settings
I just got a used wireless router (didn't get any cords yet). I have an old wired modem that connects to my pc to give me internet. It uses a cable (not ethernet cord) that plugs into the wall. My wireless modem is a Linksys Wireless-G Broadband router model number WRT54GS and for the internet connection uses ethernet. How can i connect the wireless router to the internet so i have a wireless connection? I tried plugging the ethernet cord into my modem and the other side into the internet port in the router, but it didn't work.
My laptop and desktop connect to the router and they can see eachother and everything but the router won't connect the computers to the internet. When I try to open a webpage in the inter net it says its a DNS error but I don't know. When i connect a computer directly to the modem it works though. They are both HP with Windows Vista.
I want to replace my old DIR-615 v4 d-link router with my new WRT160N v3 linksys router. The thing that I did was I simply disconnected my old one and plugged in my WRT, my Laptop detects it but it wont connect to the internet. Also I'd like to use my old wifi username and password on my new router so I dont confuse all my other family members with the new router.
I bought a Cisco-Linksys E3200 8 months ago and it worked well until last month. I usually power down the router after midnight & power up in the morning and evevry time it can connect to internet through DSL modem without problem until this Feb. Most of the time after powering up the router it just can't connect to internet anymore. I am sure the AT&T DSL modem is working. I have to reboot/reset the router & DSL modem several time to get router to connect to internet again. The order of resetting/rebooting DSL modem & E3200 router seems to make no difference. It just appears suddenly the router can connect to internet by chance. I changed router IP and it didn't work either. It's really annoying becuase I have to spend 10~40 minutes to resetting/rebooting DSL modem & router to get internet connection every day.Â
internet works fine with Belkin router replaced with Linksys E3000 and neither wired or wireless internet will connect to any web addressModem is ATT U Verse 2Wire with wireless feature disabled
I have 2 laptops that won't connect to the internet through my wireless router. They will connect through the ethernet cable though. When I click on connect, it says "waiting for network" but then closes itself and says it cannot connect. I also have one laptop that will not connect for several minutes after it "wakes up" from sleep mode or is restarted. It shows (No internet access).
Im using a Tp-link wireless router and I have a modem attached to my pc. I just noticed that if I turn off my router, the Ethernet light on my modem turns off, but the power and dsl lights are still on. Is there a way for me to use my pc even if my router is turned off? If I remember right, i've tried it before and it worked... But now, I have to turn on my router just for me to be able to connect to the net on my pc.
A week ago, my desktop (with Windows 7) stopped connecting to the internet over it's wireless connection. It would connect to the router and obtain an IP address, but couldn't connect to the internet. All other devices in my home can connect just fine. Through the course of trouble shooting I found out that I can't connect to the internet with my desktop using a wired connection either. Also, I'm using ATT, so the modem and router are 1 unit.
Here's what I have tried:
Reinstalling the drivers.Resetting the wireless router to factory settings.Changing the security settings on the router.Running netsh int ipv6 reset reset.log ;netsh int ipv4 reset reset.log; netsh winsock reset catalog and restarting TCP/IP v4 and v6 are set to get automatically Made sure MAC address wasn't being blocked on router. I tried disabling ipv6 I can ping myself (@ 127.0.0.1) and no packets are lost. I tried pinging my ip address from the router, and nothing got through. This was true using wired or wireless. I tried connecting to the routers configuration page (using its IP address) and I couldn't. Did a virus scan and nothing turned up.
I started off with my dl speed around 2 years ago at about 210kbs. Not the best but because i live in a rural area i was happy enough. But now my connection has dropped massivly to 40kbs being the peak. The internet was faster in the stone ages -_-. Anyway, i want to figure out if its the wires in the area being faulty or as someone told me it might be my wireless router (Netgear). I'm trying to plug my laptop directly into the internet without the use of wireless to find out if it is the router being the problem. The only cable i could find an ethernet to ethernet cable. I've tried plugging into router and a bit that said modem and tried to set up a connection. It didnt work so connect my laptop to the internet without the wireless router.
i have a IBM Think Pad running window xp professional and i can't connect to the internet wireless or plugged in to the router. i have several computers and all can connect to my router.. when i plug in the IBM to the router the PC LINK light on the router turns off and there is no light on the ethernet cable i thought it may have been the cable but it works on the other computers.. I turned off and unplugged the router waited then tuned it back on i also did the same with the computer before connecting them together and still nothing.
My wireless internet isn't working. The light is lit up on the router and it even says i have a full three bars on my ipod that im using it with, yet when i try to go on the internet on my ipod it says that im not connected to the internet.I looked on the internet and most websites said to type 192.168.1.1 into your address bar and change some stuff around. The only problem is that when i did this it didn't work and nothing loaded up.
I'm unable to even get an internet connection with my router, so I cannot access the router configuration settings page. I already made sure that the ethernet cables weren't the problem. I hook the cables up as instructed, but can't get the internet connection. I'm running Winows Vista Home Premium and according to my ISP (cable service), the ISP settings should already be set up to connect automatically with the router. It's a used router (not new) and I've already reset it several times..
I can connect to my router with full strength no matter where I am in my house. But the moment the router leaves my sight, I can no longer connect to the internet. I just recently set up this router and the internet was working completely fine at full speed no matter where I was; then all of a sudden I had to be within direct sight of my router just to connect to the internethere is a 6 meter distance between my router and my room. between that is a plasma tv and one wall. I don't live in a concrete bunker with 6ft thick walls.There is only one conflicting channel in the area and it is channel 1. Changing between different channels has no effect. rebooting the router has a momentary effect where I am able to connect in my room at full speed, but it eventually dies and I lose connection again.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit Processor: Intel(R) Celeron(R) CPU 2.40GHz, x86 Family 15 Model 2 Stepping 9 Processor Count: 1 RAM: 1022 Mb Graphics Card: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller, 64 Mb Hard Drives: C: Total - 35165 MB, Free - 15519 MB; Motherboard: Dell Computer Corp., 0F5949 Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated: Yes, On-Demand Scanner: Enabled
Internet AT&T using Netgear wireless router B90-755025-15, would llke to connect to Phillips HDTV to live stream various movies as well as other entertainment. Do you have suggestions regarding device(s) to use (example Western Digital TV Live Streaming media player with built in WiFi, stream content, remote.
Its a Toshiba laptop and she has a d-link 2680 wireless router. The laptop will successfully connect to the internet through an ethernet cable, and will connect to the wireless network fine but when wireless i cannot access the internet. I have an iphone which connects to the wireless network and accesses the web perfectly.I have tried everything I can think of and find online to try and talktalk tech support won't assist as its a hardware setup issue.
Windows IP Configuration Host Name . . . . . . . . . . . . : Barbara-laptop Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No
aptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties
I've just replaced my crappy TalkTalk router with my Belkin F5D9630-4 (v1001) to try and give myself a bit more wireless coverage in my flat. No matter what I try I just can't get the router to connect to the Internet.I've updated the router to the most recent firmware, and entered the following settings in my setup for the router:[CODE]
i am able to connect to unsecured wireless networks but when i connect alll of them say no internet access i only notice a yellow warning sign beside those signal strength bars also and not on secured one !
I recently, installed a TP-link TLWR741ND wireless router as an addition to Zykel P600.At first, the connection was fine and I was able to connect to the internet through wifi. However, as time goes by, I noticed connection problems in the network.I can't connect to the internet through the wireless router but if I directly connect network cable to the Zykel P600, the network will be fine. I already checked the cables and observed no problems with the cable.
i have been using a WRT54GS LINKSYS ROUTER for 2.5 years problem free until now. All of a sudden i cant connect to the internet through it at all. when i diconnect it and hook my desktop directly to the modem it works but i need the wireless to use my laptop. I have tried everything to get it working again, no dice. when using w7 diag tool it reports back local area connection doesnt have a valid ip config.
I have a d-link n150 model (wireless router) that i cannot get to pick up the signal of an 3G mobile broadband optus prepaid stick when pluged in. I have reset the router settings multiple times and nothing. Nether had a router before this one .How do i fix this problame and is it possible that the problame is in the settings of the internet stick?
I have a Dell Vostro laptop running windows 7. My ISP is a company called Scarlet which supply connection via an external modem complete with aerial. When I connect directly from the modem to the laptop via the modem it's fine. My problem is that I bought an Advantek wireless router which a friend tried to install, I'm not sure if he was successful at any point as it was some time ago. However, I am now trying to set the wireless connection up so that I can surf on the laptop and my girlfriend on her ipad in separate rooms. I currently haven't got as far as getting the laptop to work along with the modem and router, I think there may be an IP conflict. i want wireless router to work with an external wireless connection via my ISP?
I have a E2000 router that would go out and I would have to unplug and replug in every once in a while. Finally it just stopped working completely. I reset the router and now it won't let me connect. I have followed advice given to soembody else on here and went into router settings and cloned the mac, the IP address was there and reset my security settings. It let me connect to the network but not the internet...
Router: WRT54G Network: 802.11g (and I'm using WEP) Wifi Adapter: Intel R Centrino R Ultimate-n 6300 AGN No. of devices connected to wireless network: 5
My problem is that whenever 2 devices have joined the wireless network, I will not be able to do so despite placing the laptop or iPhone right next to the router, hence getting excellent signal strength. Or, if I am already connected to the network, I get knocked out repeatedly. I don't think it is a hardware or software issue because I'm still able to connect and get a very stable connection after someone leaves the wireless network.This is getting frustrating and I have tried all ways and means to resolve this but to no avail. Is this about some setting that I can tweak, e.g. to allow more users onto the network? But this has already been configured to '50'!
