Can't Connect To The Internet When Tp-link Wireless Router Is Off
Nov 14, 2011
Im using a Tp-link wireless router and I have a modem attached to my pc. I just noticed that if I turn off my router, the Ethernet light on my modem turns off, but the power and dsl lights are still on. Is there a way for me to use my pc even if my router is turned off? If I remember right, i've tried it before and it worked... But now, I have to turn on my router just for me to be able to connect to the net on my pc.
View 3 Replies
ADVERTISEMENT
Nov 17, 2012
I have a d-link n150 model (wireless router) that i cannot get to pick up the signal of an 3G mobile broadband optus prepaid stick when pluged in. I have reset the router settings multiple times and nothing. Nether had a router before this one .How do i fix this problame and is it possible that the problame is in the settings of the internet stick?
View 3 Replies
View Related
Mar 26, 2013
Region : India
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : BSNL
I Bought thisTD-W8968 a month back.. It was working alright till a few days back. From the past 3days i'm experiencing internet light and DSL light going off...The DSL light is not constant even for 5min...When the DSL light comes up, the internet light takes almost 5min to comeup or before internet light come up the DSL light goes off.There wasn't problem with my old UT star modem..I already checked,its running fine without disconnection..When i replace it with TD-W8968 router ,the problem continues.. When my internet connection was good...The SNR margin was like 25 for upstream and 31 for downstream...After 2 days it went mad. here are the images shows about current reading..Fluctuates between 0.2 - 100 upstream and 2-35 for downstream
View 1 Replies
View Related
Sep 22, 2012
recently tried to connect a Samsung BD-EM57C blu-ray player to my wireless network. I have a D-Link WBR-1310. Have one desktop, Smart tv currently on network --no problems. Blu ray will find my network but cannot connect. "unable to connect enter ip address manually" which I did. Fail. "enter subnet mask" which I did. Fail. "Ip address taken enter different address" Now what?
View 2 Replies
View Related
Jul 9, 2012
I have a D-link DIR-655 router which used to be able to connect to the internet fine through my modem. However, it wasn't connecting to the internet when I woke up this morning. I tried all the standard replacing the cables, powercycling the router, modem, and rebooting the PC. After trying all that, I used the reset button on the router and reconfigured manually by entering the IP into my browser and logging in that way, but still nothing. I can connect to the internet by plugging the modem directly into my PC, but connecting through the router or wirelessly doesn't work. I can connect to the network itself through the router, and wireless from my laptop, but it only has local access.
Here's the ipconfig going through the router:
Quote:
C:UsersSolon Family>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : SolonFamily-PC
[Code].....
View 3 Replies
View Related
Feb 15, 2011
I bought a Dlink Dir-601, I was able to connect to the internet when we were with our last internet provider but after we switched companies it no longer connects to the internet. I've tried power cycling my system, updating the firmware, factory defaulting it, resetting it with the button on the back but no luck yet
View 4 Replies
View Related
Mar 29, 2011
My new DIR-601 router has been installed and configured but will not connect to the internet either wireless or through a wired connection. Have reset and re-installed, have rebooted router, modem and computer all with no change. Connection is DSL (AT&T) and works fine when connected to either desktop or laptop computer at home. AT&T says to contact manufacturer, D-LINK says to contact ISP. After nearly two months without our wireless (XBOX and Netflix) we are about ready to return this before return period is up and just go with Clear.
View 1 Replies
View Related
Apr 12, 2013
I bought this new router, I've followed the CD and install everthing. My computer can connect to the router, but it doesn't connect to the internet.
View 1 Replies
View Related
Nov 13, 2011
I recently purchased a new Dlink DIR-655 router. My motivation was a router with a USB port. I initially purchased a DIR-632. I have 1 desktop without a wireless card so it connects to router thru ethernet cable. I have 2 personal laptops with wireless cards and 1 work computer also with wireless card. With the DIR-632 all computers would connect to router, but my work computer (Dell) would connect but then intermittenly show no internet connection. All other computers had no issues connecting to internet ( wired and wireless) The Dell would connect and have internet connection if I used a wired connection. After talking to DLink Tech support they said that i had an issue with the Dell. I called Dell and they walked me thru several things. Nothing worked. They ultimately sent in a tech who replaced wireless adapter and did a diagnosis before leaving and the Dell was deemed to be in perfect working order. I tried connecting again after Dell's repairs and same issue. DlinK Tech support then said the issue was with router and suggested replacing router. Went back to place of purchase and obtained the DIR-655. Got home and exactly the same issue. Again on the horn with Tech support and issue was determined to be bad router. Went back to place of purchase and got another DIR-655. Got home tried new router same issue. Spent in excess of 4 hrs on the phone with level 3 tech support. We tried many, many possible fixes and it appeared as if we had the problem fixed, but within a hour of hanging up with tech support the issue was unchanged.
As the Dell is a work computer I use it a multiple locations, some with no issues connecting wirelessly and one location the same issue as at my home (interestingly enough this location uses a DIR-655). At this 1 work location it says I'm connected, it says there is internet access, but I cannot do anything on the internet.(I can connect without issue with an ethernet connection) At my home location I can connect to the DIR-655 wirelessly, it initially shows internet access and I might be able to access a single webpage, but then it states no internet connection, but it is still connected to the DIR-655.
My initial DIR-615 and the Dell works perfectly fine. However that defeats the purpose of me buying the DIR-655. Ideally I want only the DIR-655 with all computers connecting thru it.
The ISP is a satellite connection. The modem is a Hughes HN9000. By spending 4 hours online with tech support we have changed the channel used, specified specific DNS locations, IP addresses, renewed DHCP, you name we have probably tried it.
The Dell for some reason just does not like the DIR-655, as it connects to the DIR-615 and 1 other work location router, but it will not connect at my home or other work locations (both DIR-655 routers).
View 14 Replies
View Related
Feb 14, 2011
I just bought DIR-655 yesterday and tried to set it up through the CD but without success. My problem at first was I couldn't get internet connect via router (but PC to DSL modem direct connection is always all right). Then I played around to turn on "Advanced DNS service" then I got internet connection via router to my PC. However sometimes the web site names couldn't be translated by DNS correctly and it resulted in "Not Found" and I am pretty sure those web sites are active and running (as I have no problem to access those if I connect DSL modem to my PC directly). Also I noticed wireless connection was very slow and some You Tube videos would stop playing after around 30 seconds and DSL modem had no further activity at all. Why couldn't I use 192.168.0.1 (default IP) as primary DNS (as I got no internet at all if I did so)? Is it really necessary to turn on "Advanced DNS service"? How can I get internet access if I turn "Advanced DNS service" off?
View 4 Replies
View Related
Apr 10, 2013
Region : Sweden
Model : TL-MR3420
Hardware Version : V2
Firmware Version :
ISP :
I'm trying to replace my old router with the TL-MR3420 but I cannot reach Internet.
I get "Internet" directly by a Cable into my apartment. This Cable is connected to the WAN input. Then I connect my computer to one of the LAN ports. (The Cable Connections are done exactly as on my previous router.)
The setup on my PC (running Windows 8) is as described in the manual (IP address automatic and DNS server automatic).
Internet doesn't work and I cannot reach the router from the browser using 192.168.1.1.
I'm not using any 3G and of course I have restarted the router (and PC) a couple of times. I thought I could just replace my old router with the new one... but NOT.
View 1 Replies
View Related
Apr 6, 2012
My D-Link Pocket Router Work like 2 Weeks. and then could not connect to my internet. i am using for connecting my computer to the internet. but i had all the correct info in. it try's to connect. yet does not connect. the AP Mode works. CL (Client)
View 7 Replies
View Related
Nov 13, 2011
I migrated my internet from PPPOE to DHCP. My wifi is working with no problem but when I hook up my computer to 1 of the 4 Lan ports I can't seem to connect to the internet I can however log in my router no problem. But I don't get internet access... I wonder what could be the problem. I tried resetting my router and modem to see if just a bug or something but to no avail.
View 5 Replies
View Related
Sep 20, 2011
I have a modem router (TP-Link TD-W8961ND) connected to the internet and working fine. It is broadcasting a wireless network and that too works fine.
I have a second modem router (Siemens SL2-141) functioning as an extender. It is wired to the first router and broadcasting a wireless network with the same SSID, same security, but on a different channel. DHCP and UPnP are disabled on the second router. My i Pad, iPhone, and Win7-based Think Pad are all able to move between the two networks with no problems.
We also have a Win XP SP2 Net book. When in proximity to Router1, this machine accesses the LAN and Internet with no problems. As soon as it gets closer to Router2, it picks up the signal and shows an "Excellent"/"Strong" connection but it can no longer see the internet. It can see Router2's config page and the other machines on the network but it cannot get past the router to the internet.
View 2 Replies
View Related
Jun 27, 2011
I bought this router a couple of months ago and it was working fine until this morning. I tried to use the internet and there was no connection at all (wired or wireless). I tried power cycling but that didn't work. I finally decided to call my DSL provider and we changed the setup from the router connecting to PPPOE to the modem connecting to PPPOE. Now, my two computers (wired) can access the internet but all my wireless devices (Android and BB) connect to the SSID (unique) but can't actually access the net.I called DLink but they decided to stop assisting me once I told them that my computers could connect but not the wireless devices. They said I need to call the manufacturers of my wireless devices - I really doubt that all 4 of my wireless devices are faulty.
View 11 Replies
View Related
Jan 4, 2012
I have been having difficulty connecting to the internet at my new place, I'm starting to think that the network card I recently bought (D-Link DWA-552 XtremeN Desktop Adapter) might have a problem, but I am not sure. I am currently using my landlord's internet, so I don't have access to the router to turn it on and off, which Windows suggests doing constantly, but I don't think that's the problem because I have internet on all my other wireless devices (Phone, PS3, Xbox).I am able to see the router most times and connect to it, but I am unable to connect to the internet, the networking image in the bottom corner has a yellow warning sign. Also, after a certain amount of time, the wireless card is unable to detect any wireless signal, the networking image in the bottom corner has a red X through it. I disabled all networking interfaces besides the wireless card because of an error message that I thought may have been caused by it: "This computer is continuously switching between two or more wireless access points or routers", but disabling the other interfaces did nothing and the message still appears after troubleshooting.
View 1 Replies
View Related
Apr 23, 2011
I want to connect to the internet with a wireless connection on a new computer. When I connect I am asked the security code that I do not know where to look.
View 1 Replies
View Related
May 13, 2013
Region : India
Model : TL-WR841N
Hardware Version : Not Clear
Firmware Version :
ISP :
i bought the TL-WR841N a week back. the problem is that the internet connection has a web based login( wherin i have to go the "login.hathway.com" and enter a username and password provided by the service provider). i was wondering if there is anything i can do so that the wifi router on its own can log on to my account automatically every time i connect a device to the router. This would save alot of time for me.
View 1 Replies
View Related
Nov 7, 2012
Region : Denmark
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : Waoo, fiber
i just bought a WDR4300. tried the quick start, then tried to manually set it up like my old Router. but i cant connect to the internet. when i check the status. it often says that WAN is unplugged, no cable. But when i use same cabels and settings on my old router it works fin.
View 2 Replies
View Related
Jan 18, 2013
set up my router. Trying to set up my 3G modem with TP-Link MR3020.
Tried troubleshooting to find out where it went wrong and just couldn't figure out. Just tried disabling the wireless security and *poof* I'm able to connect to the Internet. Right after setting up the Network Key, I can't connect to the Intertnet via my router.
Here are the datas.
Windows IP Configuration
Host Name . . . . . . . . . . . . : TOSHIBAM840
Primary Dns Suffix . . . . . . . :
[Code].....
View 5 Replies
View Related
Dec 27, 2011
Today I bought a TP-Link 150 Mbps Wireless PCI Express Adapter so I can pick up the internet connection in my house from my home PC. (We use a laptop most of the time which is able to pick it up fine).I've installed the wireless adapter into the computer and installed the drivers however I receive an error message:
"The device may not be present or could have been ejected/unplugged from the system. Insert of Reinsert Now."
View 13 Replies
View Related
Apr 16, 2013
Region : UnitedKingdom
Model : TL-WR740N
Hardware Version : Not Clear
Firmware Version :
ISP : I am trying to set up my router for about 2 days without any effect.
Here you can find, what I have to do to connect through Ethernet cable to the internet at our university:[url]....
When I set auto-detect IP on router, it says that I have Static IP. In CMD I can find out all the information about the connection and the licence is usually for one day (automatically renewing). I've also tried to clone MAC address, nothing happened.
View 1 Replies
View Related
Mar 31, 2013
Region : Malaysia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : TM UNIFI
I have recently bought a dual band router to replace the aging default router supply by the ISP.
After setting up, I found the message "No Internet Connection". I have checked the log and found that PPPoE was connected. However I am connect to the internet.
View 7 Replies
View Related
Dec 5, 2012
Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Just got my new TL-WDR4300 router. Set it up last night with the latest firmware. I can connect to Internet using a wired cable. However, I can't connect to Internet via wifi. I already tried 2 laptops (Vista & Win XP) and 2 tablets - I can see my wifi signal, connect to it (with my password), even obtained IP address (from ipconfig). However, when I tried to open a web page (eg google), it can't connect to Internet (always got timeout or service not found). Again, same laptop has no problem if I use a cable to connect to my router.
View 3 Replies
View Related
Apr 24, 2013
Region : Argentina
Model : TL-WR740N
Hardware Version : V4
Firmware Version :
ISP :
Region : UnitedKingdom
Model : TL-WR740N
Hardware Version :
Firmware Version :
ISP :
I've configured the router using the Easy Setup Assistant CD provided and have a wifi connection between the router provided however when using network diagnostics, while the wifi connection is fine, I am getting "failed to connect to Internet" and "failed to connect to server" messages. I have tried adjusting settings manually but without any progress.
View 8 Replies
View Related
May 13, 2012
I bought yesterday a wireless modem/router and Tp-Link Adsl2+ N300 Modem Router Td-W8960n.I have 2 laptop computers at home.The first issue I have is that with one of the laptops (quite old - Acer Aspire 2420-2579 with Windows Vista Basic Service Pack 1) I can not connect (wireless) to the internet. It says local access only. However in other countries (IM in NZ) it does connect to internet. It does work when I use an Ethernet cable between my router and the laptop. The second issue is with my other laptop. A HP Pavillion DV-4 windows vista home premium service pack 2. I manage to get wireless access to the internet but every couple of minutes the connections drops and starts again by itself�. After 1-2 min approx�. it is getting pretty annoying!I don�t think it is the routher as I also have an XBOX 360 connectet to the internet usign the same device and works absolutely fine!
View 6 Replies
View Related
Apr 6, 2013
Region : Canada
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 120608
ISP : Distributel
I've just installed this router today, connected physically 2 PCs, a PS3 and a VoIP and everything works fine !
The problem is with the WIFI connection ! my devices see the WIFI network, they connect, but I cannot connect to the internet ...
What settings Should I turn on/off or any config I should tweak ?
View 4 Replies
View Related
Jan 29, 2012
I have a TP-Link (TL-WR941ND) wireless router in my living room and I want to expand my connectivity to get to the bedrooms area. I have a D-link (DI-524)wireless G router I want to take advantage of. How can I connect the two routers (no cables to be used) together so I can have acces to the internet from my room?
View 1 Replies
View Related
May 10, 2013
Region : India
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : S/N: 12B79605315
ISP : BSNL Data One
I had Purchased a brand new TP-Link WifI Modem Router TD-W8961ND with S/N : 12CB5200872 from [URL] and it got delivered few days back. When I am trying to connect it to the internet the modem is not getting connected nor configured. The Power button light, ADSL Light and internet light are continuously blinking and nothing is getting steady. The modem is appearing to be a damaged piece of modem and it is very unfortunate that we have got a modem from flipkart in an unserviceable condition. It came with a warranty of 03 years and I wanted a replacement so that I can use the modem for connecting internet.
View 1 Replies
View Related
Mar 1, 2013
In my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
View 12 Replies
View Related
May 4, 2012
[URL] but then I am lost about how to connect the AP to the wireless router. And how to use the same SSID. Should I setup WPS?
View 6 Replies
View Related
Feb 3, 2013
I have a weird problem. I bought recently a new router, and when I try to connect to the settings on it on http://198.168.0.1 it sometimes works, mostly doesn't. When I ping other devices which are connected it, it's the same; sometimes get a response, mostly I don't. The router model is: TP-LINK 150Mbps Wireless N Router TL-WR740N, The thing which it's connected to is entitled "ADSL2+ Ethernet bridge router" That aforementioned thing is suppoused to be a modem. But, when I try to connect to its settings from http://10.0.0.138 , I'm able to, and other who are connected to the network give response to a ping.
View 4 Replies
View Related
Nov 12, 2012
I have a D-Link wireless router DIR-524( it has 4 LAN ports, no USB port) and i want to connect my USB printer HP Laserjet Pro P1106 to the network. Want to know if that is possible?
View 1 Replies
View Related
