D-Link DIR-655 :: Could Connect Via Wireless But No Internet Connection
Jun 27, 2011
I bought this router a couple of months ago and it was working fine until this morning. I tried to use the internet and there was no connection at all (wired or wireless). I tried power cycling but that didn't work. I finally decided to call my DSL provider and we changed the setup from the router connecting to PPPOE to the modem connecting to PPPOE. Now, my two computers (wired) can access the internet but all my wireless devices (Android and BB) connect to the SSID (unique) but can't actually access the net.I called DLink but they decided to stop assisting me once I told them that my computers could connect but not the wireless devices. They said I need to call the manufacturers of my wireless devices - I really doubt that all 4 of my wireless devices are faulty.
View 11 Replies
ADVERTISEMENT
Apr 23, 2011
I want to connect to the internet with a wireless connection on a new computer. When I connect I am asked the security code that I do not know where to look.
View 1 Replies
View Related
Nov 13, 2011
I recently purchased a new Dlink DIR-655 router. My motivation was a router with a USB port. I initially purchased a DIR-632. I have 1 desktop without a wireless card so it connects to router thru ethernet cable. I have 2 personal laptops with wireless cards and 1 work computer also with wireless card. With the DIR-632 all computers would connect to router, but my work computer (Dell) would connect but then intermittenly show no internet connection. All other computers had no issues connecting to internet ( wired and wireless) The Dell would connect and have internet connection if I used a wired connection. After talking to DLink Tech support they said that i had an issue with the Dell. I called Dell and they walked me thru several things. Nothing worked. They ultimately sent in a tech who replaced wireless adapter and did a diagnosis before leaving and the Dell was deemed to be in perfect working order. I tried connecting again after Dell's repairs and same issue. DlinK Tech support then said the issue was with router and suggested replacing router. Went back to place of purchase and obtained the DIR-655. Got home and exactly the same issue. Again on the horn with Tech support and issue was determined to be bad router. Went back to place of purchase and got another DIR-655. Got home tried new router same issue. Spent in excess of 4 hrs on the phone with level 3 tech support. We tried many, many possible fixes and it appeared as if we had the problem fixed, but within a hour of hanging up with tech support the issue was unchanged.
As the Dell is a work computer I use it a multiple locations, some with no issues connecting wirelessly and one location the same issue as at my home (interestingly enough this location uses a DIR-655). At this 1 work location it says I'm connected, it says there is internet access, but I cannot do anything on the internet.(I can connect without issue with an ethernet connection) At my home location I can connect to the DIR-655 wirelessly, it initially shows internet access and I might be able to access a single webpage, but then it states no internet connection, but it is still connected to the DIR-655.
My initial DIR-615 and the Dell works perfectly fine. However that defeats the purpose of me buying the DIR-655. Ideally I want only the DIR-655 with all computers connecting thru it.
The ISP is a satellite connection. The modem is a Hughes HN9000. By spending 4 hours online with tech support we have changed the channel used, specified specific DNS locations, IP addresses, renewed DHCP, you name we have probably tried it.
The Dell for some reason just does not like the DIR-655, as it connects to the DIR-615 and 1 other work location router, but it will not connect at my home or other work locations (both DIR-655 routers).
View 14 Replies
View Related
Feb 7, 2011
My D-Link won't allow my laptop to connect to the Internet through an Ethernet connection. I set up the router using a standard Ethernet patch cable and cloned the laptop's MAC address to connect through the Mediacom modem. I then decided to test out the wireless and got that all set up, works perfect. Now I cannot connect to the Internet using the Ethernet cable.
View 1 Replies
View Related
Mar 21, 2011
I just bought a "DLink Xtreme N Gigabit Router DIR-655" I configured it correctly. It works well for the wireless connection but my Lan connection (wired connection) does not work. The Lan computer connects to the router but cannot access the internet. All of my machines work OK with a Netgear G router, including the Lan computer.
View 9 Replies
View Related
Oct 6, 2011
This router has to be rebooted every 12-24hrs to re-establish the internet connection.
View 14 Replies
View Related
May 21, 2012
I have a DIR-655, hardware B1, firmware 2.03NA. Sporadically, generally after the router has been on for 24 hours, I lose wireless Internet (WAN) connectivity. I can still connect just fine to the router interface. And if I plug in hardwired Ethernet, I can access the Internet just fine.I previously had a DIR-615 in operation with no problems.
-ISP modem Motorola SB6121 (stand-alone cable modem)
-QoS/traffic shaping off; also disabled advanced DNS (tried OpenDNS as well as Comcast defaults)
-DNS relay enabled
-Using reserved IP addresses on the local network, all devices are set to DHCP
-Enabled/disabled UPnP/multicast
-Tried all firewall options, including disabling
-Wireless using Mixed 802.11n/g; tried channel width 20/40 and just 20. Disabled auto channel scan and forced to -ch11. No other wireless interfering. Using WPA2 only, AES, with a 63char key.
-Disabled WISH
-Disabled WLAN partition, WMM enable, short GI.
-Cat6 between modem and router
Again, hardwired LAN connection seems to be fine. I've already RMA'd the router once.When wireless Internet doesn't work, it seems to be all affected devices (iPhone/iPad/MacOS/WinXP/Roku).
View 6 Replies
View Related
Aug 28, 2012
So I have a DIR-655 and my internet connection drops every day. I have replaced the DIR-655 with a linksys just to try it and it works fine. This has happened with more than 1 of these 655''s. Also I have clients calling saying the wireless drops and it will not let them reconnect until I reboot the router. I have updated to the newest firmware with the same issues. I know its not bad cause I have more than 1 655 doing the same thing at a different location as well.
View 1 Replies
View Related
Feb 16, 2011
I had to reboot my Dir 655 because my 2 wireless laptops wouldn't connect to the internet. Once I reset all of my static IP settings in the dlink admin tool the wireless laptops work fine. The problem now is that I can't connect to the internet on the computer that is hard wired into the router. I recall once before having to adjust the TCP/IP settings in the Network settings, but don't remember exactly what it was the I had to do.
View 15 Replies
View Related
Oct 25, 2011
I bought a DIR-655 about 8 months ago. I had no problems connecting to the internet for the first couple of months. Then I would get a random connection problem where I would reset my modem or the router and all would be fine for a while. Then about a month and a half ago it started getting worse and worse and about 3 weeks ago it got to a point that I was resetting the router or modem daily to get a initial connection to the internet. And that would last until the next day when we would try to access the internet. Ocassionally, if I had a good initial connection, I would get a random loss of the connections a minute or two after I started surfing the web. Initially a modem or router reset would clear this up too. This happening both over wireless and through the hard wired connection. So it doesn't matter how I am using the Router. AND, most recently resets may not even get me a solid connection to the internet. So, I have bypassed the router for now.
The router was set up with changes to only passwords, network name, a changed router IP address and not broadcasting the wireless it has worked fine. After the reset, I left the router IP address as the default but changed the above security settings. Nothing else was changed. I have never had any issues logging into the router menus through the default or my defined IP addresses.
In doing some troubleshooting, I performed a reset on the modem several times, none of which resolved the problem, I was still losing the connection. Then I bypassed the router and did a direct connection to the modem and all is good and I have not had a connection issue since. I even tried changing the Ethernet connection on the back of the home computer to a different computer port but that changed nothing. I am currently trying a different cable. I am using the standard connection scheme:Cable from outside to modem, modem to router via Ethernet into the proper router port, Router to static computer via Ethernet. And a laptop accesses through the wireless. All cables have been working fine and are home built CAT 5e cables
It is really frustrating and I am not sure where to start now. Currently, I am running without the router for internet but I need it for the wireless to a laptop in another room. I use Time Warner Cable and have a Atlantic Scientific DPC2100 cable modem.
View 5 Replies
View Related
Jan 28, 2011
I have had a Dlink dir 615 for some time now and always had a few issues, but nothing a reboot of the router couldn't solve. This time the problem is persisting, though. The wireless signal keeps blinking and on my laptop it says No internet connection. I've rebooted the router, restored the router, rebooted the modem, and nothing seems to work.
View 1 Replies
View Related
Nov 18, 2012
I've recently bought a TL-WR1043ND & i'm trying to connect my Sky+ box to the Internet. When I connect the box directly to my broadband router all works OK. When I connect via an Ethernet connection on my TP-Link router - it get's an IP address from the router but it will not connect to the internet.
View 4 Replies
View Related
Aug 18, 2011
i just bought and installed tp link wireless G usb adapter TL-wn422G.
i was tring to connect to the internet but after about 30 second the connection to the internet was terminated, and i need to unplug the device and replug it , in order it will work again (for about 30 seconds more).
i have an edimax router and all my other devices are connect perfectly (laptop, iphone , galaxy s)
View 6 Replies
View Related
May 24, 2011
We have a D-Link DI-524 wireless router that has had no problems until today. Our laptops (with Windows XP), iPods, and iPhones all show that there is an excellent wireless network connection (as usual), but none of the computers or devices will connect to the Internet. I tried resetting, rebooting, and unplugging the modem and router. The router and modem seem to be fine. When we disconnect the router and plug the laptop directly into modem, we have Internet connection (i.e., it's not the IP).
View 4 Replies
View Related
Jan 14, 2013
Region : UnitedStates
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.13.9 Build 120201 Rel.54965n
ISP : TDS
Currently I am using 2 WA5210Gs and a WR941ND to send my wireless connection from one home to another. The original home utilizes a TDS DSL modem/router combo. Everything works great, but then generally withing 24 hours I will randomly drop my internet connection in the second home, but the network is still up and running strong. The modem is not the problem, because I am able to grab a faint signal from the WA5210G AP connected to the modem and access the internet, and the client WA5210G AP is running at full signal. If I power down the router and restart it, the problem is fixed, but happens again within 24 hours. Originally I changed the IP on the WR941 thinking it was an IP conflict with the modem/router, but the problem occurred again. I also tried switching to unicast DHCP, but the problem still persisted. I looked for a firmware update, but couldn't find a newer version..
View 5 Replies
View Related
Feb 9, 2013
Region : Poland
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.13.9 Build 120201 Rel. 54965n
ISP : Toya Lodz
This is already my second model of the router, which got under warranty. The first model had a problem because it brokes off Internet connections. This second model also breaks the connection. I'm going to give it to complain. Before I do it I would like to ask if there are any ways to improve the router without the need to dispose of the device.
View 14 Replies
View Related
Nov 24, 2011
I upgraded then downgraded from 2.00 to 2.03 back down to 2.00, and whenever I'm doing about 600kB/s+ it resets itself. Drops connection drops wireless, wired, and the globe internet icon goes Lambert/orange. I've reset the router to default and it still does that. What could be the cause?
I've done a lot of changing around, disabling unicast, changing from WPA Auto to WPA2, etc etc, I just changed the router to Netgear WGR614 v7 and it works perfectly fine now.
View 14 Replies
View Related
Jan 29, 2011
In our company, there are some 10 WAP is installed. Just I have bought a laptop and want to install wireless internet connection.
View 5 Replies
View Related
Feb 16, 2011
I setup a D-Link DIR-825, VB1, Firmware V2.00NA about a month ago. We have 3 Macs here at home - 1 brand new iMac, a G4 Powerbook, and an old G4 / 933 Tower. The G4 tower is connected via ethernet. The other two through Wi-Fi. My problem is that I can barely use the internet for even a few minutes on the G4 tower, connected via Ethernet, without losing my connection. I can be in the middle of loading a page or an image, and suddenly it will say "Waiting for xxx.com". Then if I try to go to Google.com or something I will invariably get "Looking up xxx.com". The connection usually returns on it's own, but it can take up to 3 or 5 minutes. When I get this message on the ethernet G4 tower, I will also have lost connection on the wireless Macs. For the first couple of weeks the tower was not connected and we were just using the two wireless Macs, and they were working well. It seems that as soon as I hooked up the G4 tower via ethernet, connections became very flaky and intermittent all of a sudden.All the Macs are configured for DHCP. We have a Time Warner cable modem. The G4 tower had previously been used at my office with it's own dedicated DSL modem / router, and it worked flawlessly for months at a time without dropping a connection. I've tried rebooting the modem, then the router, then turning all the Macs back on, several times. Same result. I just tried loading the new firmware but it didn't work. Said the Gateway was too crowded or something.
View 1 Replies
View Related
Apr 14, 2013
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
Region : Netherlands
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.13.9 Build 120201 Rel.54965n
ISP : Ziggo
I currently have a issue with my TP-link WR941N.When I first connected the router I had a good internet speeds of about 70 mbps. My max provided by the ISP is 120Mbps but 70 was acceptable for me. Recently however the connection is terrible. I regularly have a speeds of 6Mbps via the router, When i directly to the modem via kabel I get a speed of 120Mbps. Therefore I ruled out that the connectivity problem is due to my ISP.
View 1 Replies
View Related
Jan 23, 2013
Region : Malaysia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 121106
ISP : unifi
i just bought this router and upgraded the firmware. but i cant seem to get Internet connection up and running. it says connected but its not. tried both 121106 and 121226 firmware, still the same. when i checked the connection it says DNS server not responding.
View 7 Replies
View Related
May 14, 2013
Region : UnitedStates
Model : TL-WR841N
Hardware Version : V8
ISP : ATT
I get this new router TL-WR841N from amazon.com, I get no signal/internet connection on my computer when I install/connect the router using the installation min CD (same procedure at listed here: url...The DSL connection is good, since I get internet connection when I connect my modem directly (without the router) to my computer. My modem is the old Siemens SpeedStream 4100 with IP Address of 192.168.0.1 from ATT.Is my router deficit ?
View 2 Replies
View Related
Nov 14, 2011
Im using a Tp-link wireless router and I have a modem attached to my pc. I just noticed that if I turn off my router, the Ethernet light on my modem turns off, but the power and dsl lights are still on. Is there a way for me to use my pc even if my router is turned off? If I remember right, i've tried it before and it worked... But now, I have to turn on my router just for me to be able to connect to the net on my pc.
View 3 Replies
View Related
Nov 1, 2011
Can 't connect to the free internet connection, but can on secured and that one have weak signal. What is problem?
View 7 Replies
View Related
Jul 3, 2012
I have a Samsung RV510 laptop computer running Windows 7 that is about 6 months old. It has worked well until the last couple of days. Despite the fact that it shows an active wireless internet connection, I cannot get web pages to open. I have tried both IE and Firefox with no luck. I have tried many different websites including microsoft, msn, google and yahoo and none have connected. Other devices connected to the same wireless network include a laptop running XP, a MacBook pro, an iPhone, an iPad, and several android smart phones and all have been functioning without issue. An XP desktop is also connected to the router with an ethernet cable with no issues. This laptop is the only device running Windows 7.
When I run the windows network diagnostics tool I get the message "Problem found The remote device or resource won't accept the connection". I have tried most of the recommended actions associated with the linkI have successfully pinged www.google.com and www.yahoo.com. I have also tried several other things that i found while doing research on this problem with no success.[CODE]
View 6 Replies
View Related
Mar 4, 2012
got an old computer to use from a family member and it is not alowing me to connect to the internet. it shows all my wireless connections but wont alow me to connect and use the internet. how do i fix this problem?
View 1 Replies
View Related
Oct 21, 2011
A few weeks ago I tried to install vmware to my toshiba laptop to play around with is and eventually install Windows server 2008 virtually. Well I didnt complete the installation and set up because I forgot to write down the registration key #. Ever since then I have had a terrible time getting my network reconfigured and have tried everything with Verizon network support over the phone. I am now unable to get a valid Ip address or default gateway with either my Wireless or my LAN connections. I have done all types of troubleshooting, resetting netgear router, modem, ip config /reset /renew,netsh winsock reset catalog commands and etc . . . STILL NOTHING WORKS ! I have another machine that is a mac book on my home wirless network that connects just fine, the only problem is my machine. And I have also taken this machine to my job and try connect to the wireless public network and all I get is "limited access" I ran the network test that Kadar provided and this is what I get:
Windows IP Configuration
Host Name . . . . . . . . . . . . : JerryDiaz-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code].....
View 2 Replies
View Related
Feb 21, 2013
Region : India
Model : TL-WR740N
Hardware Version : V4
Firmware Version :
ISP :
how to setup an adhoc network using TPLINK WR740N without using any internet connection?I want to setup a WLAN connection between my Desktop and 2 other Laptops for file transfer and sharing.... how to search and connect to other available wifi networks using my router?
View 3 Replies
View Related
Jan 4, 2012
I have been having difficulty connecting to the internet at my new place, I'm starting to think that the network card I recently bought (D-Link DWA-552 XtremeN Desktop Adapter) might have a problem, but I am not sure. I am currently using my landlord's internet, so I don't have access to the router to turn it on and off, which Windows suggests doing constantly, but I don't think that's the problem because I have internet on all my other wireless devices (Phone, PS3, Xbox).I am able to see the router most times and connect to it, but I am unable to connect to the internet, the networking image in the bottom corner has a yellow warning sign. Also, after a certain amount of time, the wireless card is unable to detect any wireless signal, the networking image in the bottom corner has a red X through it. I disabled all networking interfaces besides the wireless card because of an error message that I thought may have been caused by it: "This computer is continuously switching between two or more wireless access points or routers", but disabling the other interfaces did nothing and the message still appears after troubleshooting.
View 1 Replies
View Related
Nov 17, 2012
I have a d-link n150 model (wireless router) that i cannot get to pick up the signal of an 3G mobile broadband optus prepaid stick when pluged in. I have reset the router settings multiple times and nothing. Nether had a router before this one .How do i fix this problame and is it possible that the problame is in the settings of the internet stick?
View 3 Replies
View Related
May 13, 2013
Region : India
Model : TL-WR841N
Hardware Version : Not Clear
Firmware Version :
ISP :
i bought the TL-WR841N a week back. the problem is that the internet connection has a web based login( wherin i have to go the "login.hathway.com" and enter a username and password provided by the service provider). i was wondering if there is anything i can do so that the wifi router on its own can log on to my account automatically every time i connect a device to the router. This would save alot of time for me.
View 1 Replies
View Related
Mar 26, 2013
Region : India
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : BSNL
I Bought thisTD-W8968 a month back.. It was working alright till a few days back. From the past 3days i'm experiencing internet light and DSL light going off...The DSL light is not constant even for 5min...When the DSL light comes up, the internet light takes almost 5min to comeup or before internet light come up the DSL light goes off.There wasn't problem with my old UT star modem..I already checked,its running fine without disconnection..When i replace it with TD-W8968 router ,the problem continues.. When my internet connection was good...The SNR margin was like 25 for upstream and 31 for downstream...After 2 days it went mad. here are the images shows about current reading..Fluctuates between 0.2 - 100 upstream and 2-35 for downstream
View 1 Replies
View Related
Nov 7, 2012
Region : Denmark
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : Waoo, fiber
i just bought a WDR4300. tried the quick start, then tried to manually set it up like my old Router. but i cant connect to the internet. when i check the status. it often says that WAN is unplugged, no cable. But when i use same cabels and settings on my old router it works fin.
View 2 Replies
View Related
