got an old computer to use from a family member and it is not alowing me to connect to the internet. it shows all my wireless connections but wont alow me to connect and use the internet. how do i fix this problem?
View 1 RepliesEA4500 Linksys router stopped allowing vizio Internet apps to connect from two different TV's. Problem, Just got brand new EA4500 router and Motorola SURFboard DOCSIS 3.0 High-Speed Cable Modem Model: 575319-019. I have 2 new vizio big screen tv's with internet apps. All was working fine and had no problems but occasional drops or limited access.
One day BOTH TV's could no longer connect. However, The tv's will connect to another access point. therefore the problem does not exist in the TV/s and has to be a problem in my access point (I.E. Router allowing access). Additionally, all other devices connect and work fine. I have already unplugged everything for an extended period of time. Checked for updates on firmware and verified no software needed to be updated. Rebooted router... Am using wpa-psk and feel i shouldn't have to go weep as it was working fine...
I recently saw it for a good price online, and required a new router (had a netgear that died, and my backup was a really buggy Belkin which I'm currently using).I'm having an issue with the internet, in that when I connect my ADSL modem to the WAN port it seems to work fine, however the PC can't connect to the internet. When I go into the settings it says that the WAN connection is OK and even shows my external IP. I have it set via the stardard DHCP setup.Should I have done anything specific to my ADSL modem before plugging it into the RV180W? The Modem (D-Link 320B) also has a DHCP server on it, however I assume that this causes no issues when connected to the RV180W.
View 1 Replies View RelatedI've got an 1841 router acting as the firewall for a LAN. It also does NAT and acts as the dialer for a PPPoE DSL line to the internet.
All is working fine, except now I need to allow a Tivo device to connect to certain ports on the Tivo servers on the internet. I want only the Tivo to be able to do this. The problem is that NAT is happening before my outbound ACL is checked, so even though I've got rules to allow the Tivo's LAN address out on all ports, it never works. I've verified this using a syslog server, and can see my external DSL IP trying to connect to the Tivo servers and being denied.
I've done things like this at work by NATting the appropriate internal host to its own external static IP address, which allows me to write rules allowing only that external address to do stuff. But I don't have multiple external addresses to work with here.
I tried applying my outbound ACL to the LAN interface of the router in the "in" direction (and removing the same ACL from the Dialer interface in the "out" direction), but that broke other things like the router's own ability to ping out to the LAN or to see a TFTP server on the LAN. I could maybe fix all of that with rule changes and inspect statements on traffic going out toward the LAN (not sure of this, think so), but I'm wondering:
Is there a better way to let just the Tivo makes outgoing connections to certain ports?
Config pasted below:
!
! Last configuration change at 17:15:10 CDT Sun Jul 15 2012
! NVRAM config last updated at 16:27:14 CDT Sun Jul 15 2012 by someguy
!
[Code].....
I have a Cisco 1811W that after several years in service suddenly stopped allowing any wireless connection to laptops on the domain. It allows hard wired connections and devices that are just using the wireless hot spot like iPads and Iphones but not devices on the domain. These same laptops connect wirelessly without issue at our other facilities which use the same hardware.
Here is the config file of the router in question...
router#show run
Building configuration...
Current configuration : 11776 bytes
[Code].....
We recently had the Aironet 3502i APs installed in our infrastructure and are having a bad time with hosts connecting to them. The controller sees them, they have an IP, they are showing a solid green light, but you cannot get devices to connect. If you reboot the device you get about 5 seconds of connection and then it disconnects. The only cure seems to be rebooting the APs, but I am baffled why this keeps happening. The installer is blaming our devices, but it is happening to laptops, thin clients, and even cell phones. From what I've seen, everything works fine until, i believe, the device tries to refresh it's lease and is unable to do so.
View 6 Replies View RelatedMy Netgear wireless router had been working just fine and then inexplicably stopped allowing wireless internet access. My modem is fine. I contacted my internet service provider, and no luck. I unplugged the router's power source and plugged it back it in. Still not working. I switched the power on and off. Nothing. I do not know what to try next.
View 1 Replies View RelatedThe following diagram represents my current network.
I would like for the Phone and the Laptop both on wireless to have internet access but not access to the other PCs/shares.
I have access to routing tables in both the cable router 10.0.0.1 and the wireless router
wired : ASUS RX3042H
wireless : Linksys WRT54G (default Firmware)
I have a 100mb conection and regularly get 90mb plus speed when conected direct to the modem. If I conect via the E4200 I only get 50mb ? I have tried disabling the firewall and QOS but this has had no effect. I am using a wired conection and the latest firmware. Its almost as the E4200 is capped at 50mb throughput.
View 6 Replies View RelatedI have 5508 controller in my lab. I am working on a project to set up a public internet but with some condition.
- User should able to connect to the SSID without any authentication.
- Once user will connec to the SSID it should redirect to an external URL which indicates terms and condition and email address field.
- User should enter his/her email address in email addrss filed and click I accept button.
- Once that is done then he/she is allowed to access internet.
We are not sure how can we achive this as I do not know what should be the return value for WLC to allow that user to go through or what should be the settings on the WLC to redirect to the page.
I have seen a settings on web authentication for external URL but I guess it is only for username passwor or Radius authentication. While in this case I do not want to use any authentication just an accept buttor or Decline button and all good to go.
We have a cisco 2800 router and are now required to allow users to be able to connect to another company's extranet. Having tried this it wont allow this connection so I have added this to the access-list 101
access-list 101 remark SDM_ACL Category=0
access-list 101 permit ip any host 192.168.0.246
access-list 101 permit ip any host 192.168.0.247
[Code].....
I dont think the gre is being allowed back in. I have attached a cut down copy of the config. I have just general experience of cisco routers and not cisco qualified.
There is a problem with my WLC, it is not allowing an specific client to connect. It gives an 802.1x failure log but I am not using it, anyways the WLC puts this client in the excluded clients list and I didn't add it manually, in fact is a new laptop.
I attached a couple of screens from my WLC.
IOS is 7.0.98.0
My internet speeds are 45 Mbps DL and 1 Mbps UL and my various wireless connections (3 laptops in my household) were achieving speeds anywhere from 25-40 Mbps DL. My router started acting up and wasn't letting anyone connect via wifi so I did a factory reset and set it up the same way I did before (as best as I could), it started working fine again but now the speeds on all the devices that are connecting to at are capped at 18 Mbps. A simple speed test shows that no matter what they won't pass 18 Mbps, I am almost 100% certain this is the router and I was wondering what I might have done wrong or what is causing this.
View 5 Replies View RelatedI just bought the 655, mainly for school/Xbox. My parents use it also, but I bought it for myself mainly (shh). I set it up correctly and got connected, but suddenly I wasn't allowed Internet access. The router connects to my laptop, but won't get Internet access. I called customer service and he didn't know what to do. We tried everything he knew and nothing worked. I don't want to return the router cause I read it was very good, but I need internet for school. I have Rev. A and F/W 2.00.
View 8 Replies View RelatedI have a nac guest server 3315 appliance with 4 NICs. I want to connect each NIC to 4 different networks without allowing traffic between them. So RADIUS interface will be different from sponsor/admin interface to the NGS. how to achieve this. I have created and assigned a static IP address using system-config-network, but when i do ifconfig i dont see the remaining 3 NICs and the web interface doesnt seem to have provision to create this interfaces.
View 3 Replies View RelatedI have created a RA VPN with a 5505 using Anyconnect client. My VPN functions perfectly, but now I am trying to limit access so that only one single host on my network can connect. To do this I tried creating an ACL permiting the host and denying all other traffic, but it does not work it seems every one can connect. how I can limit the outside access to a single host?
View 3 Replies View RelatedBelkin N450 Router. I want to restrict Internet access completely but allow LAN access to a shared drive for a particular computer on my wireless network. I have gone into the web based set up page and under access controls have enabled and added this computer to the list. I have blocked http, https, ftp and nntp. I don't know if this is enough. The reason I am asking is that I am in Iraq right now and I want to allow my fellow team members access to the wireless for using viber on their iphones but one cat even though he has hardwired internet wants to continuously suck off my wireless for his computer to download stuff since I paid for faster internet. I am trying to do this quietly and still allow him access to the shared drives on the LAN. Sooooo If I block him just outright will he still have access to the drives or do I need to pick and choose like I did above and if I need to pick and choose did I miss anything other then pop3 email and imap?
View 2 Replies View RelatedI'm a college student working on a lab involving a Cisco PIX 501 Firewall.
My project involves 1 computer and a firewall. My goal is to use the firewall to allow access to the internet for that computer which uses a static IP 192.168.1.5 and ONLY for that IP address. The firewall is connected to the internet.
I have the computer hooked up to the firewall with the serial and using hyper terminal to enter commands. I think I need to use access lists in order to deny traffic on those ports for those particular hosts. I can't figure out exactly how I need to set it up.
What I need to do is permit internet access for 192.168.1.5 alone. Any other IP should not be able to access the internet.
I tried:
access-list 1 permit tcp host 192.168.1.5 any eq 80
access-group 1 in interface inside
I cannot access the internet using the computer with 192.168.1.5. The goal is to be able to access with that IP and no other.
In our company, there are some 10 WAP is installed. Just I have bought a laptop and want to install wireless internet connection.
View 5 Replies View RelatedInstalled new N600 router and every box in the house can access the internet - except for my Vista powered laptop. My network shows up as Unidentified network with 'locla only' access. Ben scouring message boards all day. Can't find a solution at Microsoft.
View 3 Replies View RelatedI have a Linksys router (model BEFSR41) and I all the outputs going to two computers and two gaming systems (X360 and PS3). I have had the router for over a year and it works fine, but I recently decided to attempt to have my 360 access the media on my computer by linking the two together through the Media Center. To do this, I needed to enable my router to allow UPnP (according to Microsoft help). When I did enable this, the router would disconnect me every 2-5 seconds from the internet, then would reconnect me right away.I have no clue why it was doing this (it occured across all of my devices) so I just disabled UPnP and things went back to normal. How to fix this so that I can have a consistent and stable connection when I have UPnP enabled?
View 1 Replies View RelatedCan 't connect to the free internet connection, but can on secured and that one have weak signal. What is problem?
View 7 Replies View RelatedI have a Samsung RV510 laptop computer running Windows 7 that is about 6 months old. It has worked well until the last couple of days. Despite the fact that it shows an active wireless internet connection, I cannot get web pages to open. I have tried both IE and Firefox with no luck. I have tried many different websites including microsoft, msn, google and yahoo and none have connected. Other devices connected to the same wireless network include a laptop running XP, a MacBook pro, an iPhone, an iPad, and several android smart phones and all have been functioning without issue. An XP desktop is also connected to the router with an ethernet cable with no issues. This laptop is the only device running Windows 7.
When I run the windows network diagnostics tool I get the message "Problem found The remote device or resource won't accept the connection". I have tried most of the recommended actions associated with the linkI have successfully pinged www.google.com and www.yahoo.com. I have also tried several other things that i found while doing research on this problem with no success.[CODE]
A few weeks ago I tried to install vmware to my toshiba laptop to play around with is and eventually install Windows server 2008 virtually. Well I didnt complete the installation and set up because I forgot to write down the registration key #. Ever since then I have had a terrible time getting my network reconfigured and have tried everything with Verizon network support over the phone. I am now unable to get a valid Ip address or default gateway with either my Wireless or my LAN connections. I have done all types of troubleshooting, resetting netgear router, modem, ip config /reset /renew,netsh winsock reset catalog commands and etc . . . STILL NOTHING WORKS ! I have another machine that is a mac book on my home wirless network that connects just fine, the only problem is my machine. And I have also taken this machine to my job and try connect to the wireless public network and all I get is "limited access" I ran the network test that Kadar provided and this is what I get:
Windows IP Configuration
Host Name . . . . . . . . . . . . : JerryDiaz-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code].....
I bought this router a couple of months ago and it was working fine until this morning. I tried to use the internet and there was no connection at all (wired or wireless). I tried power cycling but that didn't work. I finally decided to call my DSL provider and we changed the setup from the router connecting to PPPOE to the modem connecting to PPPOE. Now, my two computers (wired) can access the internet but all my wireless devices (Android and BB) connect to the SSID (unique) but can't actually access the net.I called DLink but they decided to stop assisting me once I told them that my computers could connect but not the wireless devices. They said I need to call the manufacturers of my wireless devices - I really doubt that all 4 of my wireless devices are faulty.
View 11 Replies View RelatedI want to connect to the internet with a wireless connection on a new computer. When I connect I am asked the security code that I do not know where to look.
View 1 Replies View RelatedIm using a Sony vaio laptop with windows vista. My Internet used to work perfectly and suddenly today my wireless will connect but I can't use the Internet. My iPhone and my aunts laptop can connect and work fine, it's just my laptop that has the problem. I've tried a system restore and a few other things but nothing seems to work
View 1 Replies View RelatedI'm using my home desktop to make this post. This is issue is with my Dell laptop that--up till an hour ago--had a wireless area connection icon in the lower right corner and a Wireless Area Network option when I went to "Network Connections" (I still have my LAN option.) I was using a Driver Whiz program to update all my drivers when it said I needed some Intel Wireless Config program. So I downloaded it but at the end I had no Internet access and no icon, etc. So I uninstalled that program but it was too late. I've even tried a system restore to a few hours prior to this mistake of mine to no avail. My husband says I need to connect hardwire to the Internet and download a WAN driver...is that correct?
View -1 Replies View RelatedI just bought a new E3000 router less than 2 weeks ago. I spent hours with my tech guy setting up the router so that I was getting excellent internet speed and the connection between my computer and my nas was maximized. In the process of setting up the router my laptop (Windows 7) and the basement laptop (Vista) were set up to access the router. Both work perfectly.These are now the only two devices in the house that can get internet access.The other devices that should connect are:
-2 Laptops (both Vista)
-1 iPhone 4
-2 iPhone 3gs
-1 Printer
I can't get them to connect. I spent an hour with a guy at Cisco tonight who just couldn't seem to get past the idea that it was not the laptop that was the problem.
I just set up a new router/modem from Centurylink (C1000A) and am having a problem connecting wirelessly to the internet on my laptop. I have a Dell 1390 Mini-card. The laptop shows that I have excellent wireless connectivity. Is there a setting that I need to change to get my internet to stay connected?
View 8 Replies View RelatedI have had a problem with my WRT400N wireless Linksys router. Whenever my router restarts or if the DHCP lease expires, I'm unable to connect to internet. During this time I can access the router, but not the internet. Oddly something that seems to "fix" this is if I use my nintendo wii to access my wireless internet at that time, all computers on my network are able to access the internet. However this is annoying to do since this happens once a day from DHCP lease expiring. Using any other computer to attempt to access the internet at this time would be unable to get a connection until I do the "fix" with the Wii. WRT400N
View 8 Replies View RelatedI just bought a E1000 and connected it to my cable modem. I can connect to the internet with my wired PC and wired Xbox 360 with no problems. For some reason on my wireless laptop I can only connect to the internet by the Guest connection. When I connect to the regular router SSID I get local only access, no internet.
View 2 Replies View RelatedReciently I bought a WRT120N Router to get a better internet connection and to have more capacity to connect different wireless devices, because the modem from my internet provider company is extremely restrictive.
I use an iMac, a Notebook with Windows 7 and a Netbook with Ubuntu 11.04, besides different devices (iPhone, iPod, PS3, Kindle). Although when I configured the router I connected every devices simultaneasly, with better signal quality than before, after using it for a couple of days I found that it disconnects itself, I can't access internet, and my only solution it's to switch it off and on.