Unresponsive Router - Stopped Allowing Wireless Internet Access

Nov 3, 2012

My Netgear wireless router had been working just fine and then inexplicably stopped allowing wireless internet access. My modem is fine. I contacted my internet service provider, and no luck. I unplugged the router's power source and plugged it back it in. Still not working. I switched the power on and off. Nothing. I do not know what to try next.

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: E4200 - Stopped Allowing Traffic Through Ports Completely

Apr 24, 2013

I posted my complaint on Amazon.com recently.  My E4200 router stopped allowing traffic through ports completely.  I was able to unplug the power and allow the router to cool, and the router would work for a while then stop after about 10 minutes.  I assume that the unit was overheating, but I do not have the equipment of a test facility.I bought a Belkin AC 1200 router which is a bit of an upgrade from Amazon.com.  I do not think that there is anything that Linksys can do for me as my warranty expired.  I just thought that when I spent what was to me a lot of money the router should have lasted longer.

View 5 Replies View Related

D-Link DIR-655 :: Router Not Allowing Internet Access?

Jan 14, 2012

I just bought the 655, mainly for school/Xbox. My parents use it also, but I bought it for myself mainly (shh). I set it up correctly and got connected, but suddenly I wasn't allowed Internet access. The router connects to my laptop, but won't get Internet access. I called customer service and he didn't know what to do. We tried everything he knew and nothing worked. I don't want to return the router cause I read it was very good, but I need internet for school. I have Rev. A and F/W 2.00.

View 8 Replies View Related

Local Access Only - Router Not Allowing Access To Internet?

May 18, 2011

Abruptly internet access disappeared. It's a router issue, none of the computers here can connect. Further, I can't access the router through a browser - 192.168.0.1 results in a "Firefox cannot connect" message. I've tried resetting the DNS to no avail. I'm typing via cell phone and it's annoying, but I'm willing to try about anything.

View 4 Replies View Related

Cisco :: 1811W Stopped Allowing Wireless Connection Of Domain Laptops

Nov 8, 2011

I have a Cisco 1811W that after several years in service suddenly stopped allowing any wireless connection to laptops on the domain. It allows hard wired connections and devices that are just using the wireless hot spot like iPads and Iphones but not devices on the domain. These same laptops connect wirelessly without issue at our other facilities which use the same hardware.
 
Here is the config file of the router in question...
 
router#show run
Building configuration...
Current configuration : 11776 bytes

[Code].....

View 2 Replies View Related

Linksys Wireless Router :: WRT310N Stopped Permitting Internet Access To Device

Aug 19, 2011

My WRT310N linksys wireless router has recently stopped permitting internet access to devices connected to it, both wired and wirelessly. I have connected my broadband modem directly to a single computer (which is how I am posting this) and evidently there is nothing wrong with my internet service. I have tried restarting my modem, the router, and the computers I am trying to access the internet with, and it has not worked. Note that local communications work fine, I was able to ping another device connected to the router, and even establish a TCP connection.It is possible that the settings on the router have been changed without my knowledge, if so, however, I do not know which setting could be causing this.

View 1 Replies View Related

ASUS RX3042H - Allowing Wireless Internet But Restricting LAN Access

Mar 20, 2011

The following diagram represents my current network.

I would like for the Phone and the Laptop both on wireless to have internet access but not access to the other PCs/shares.

I have access to routing tables in both the cable router 10.0.0.1 and the wireless router

wired : ASUS RX3042H
wireless : Linksys WRT54G (default Firmware)

View 2 Replies View Related

Cisco Wireless :: 5508 - Allowing User To Access Internet After Entering Email Address

May 25, 2013

I have 5508 controller in my lab. I am working on a project to set up a public internet but with some condition.
 
- User should able to connect to the SSID without any authentication.

- Once user will connec to the SSID it should redirect to an external URL which indicates terms and condition and email address field.

- User should enter his/her email address in email addrss filed and click I accept button.

- Once that is done then he/she is allowed to access internet.
 
We are not sure how can we achive this as I do not know what should be the return value for WLC to allow that user to go through or what should be the settings on the WLC to redirect to the page.
 
I have seen a settings on web authentication for external URL but I guess it is only for username passwor or Radius authentication. While in this case I do not want to use any authentication just an accept buttor or Decline button and all good to go.

View 2 Replies View Related

Linksys Wireless Router :: E2000 Not Allowing Access To Other Devices

Nov 5, 2011

I just set up my e2000 on a PC using Windows 7.  I am additionally trying to set up additional devices on the network.  The two that I am currently working with are:Dell Latitude d240 running Windows XP.HTC Evo smartphone running Android
 
I can't get these on the network through the e2000.  They can access the internet through the e2000 but only as a guest and therefore don't have the same level of security.  What do I need to do to successfully put the above devices on the network?

View 2 Replies View Related

Belkin Routers :: N450 - Blocking Internet But Allowing LAN Access?

Nov 16, 2012

Belkin N450 Router. I want to restrict Internet access completely but allow LAN access to a shared drive for a particular computer on my wireless network. I have gone into the web based set up page and under access controls have enabled and added this computer to the list. I have blocked http, https, ftp and nntp. I don't know if this is enough. The reason I am asking is that I am in Iraq right now and I want to allow my fellow team members access to the wireless for using viber on their iphones but one cat even though he has hardwired internet wants to continuously suck off my wireless for his computer to download stuff since I paid for faster internet. I am trying to do this quietly and still allow him access to the shared drives on the LAN. Sooooo If I block him just outright will he still have access to the drives or do I need to pick and choose like I did above and if I need to pick and choose did I miss anything other then pop3 email and imap?

View 2 Replies View Related

Cisco Firewall :: Allowing Internet Access Only For Specific Computers On PIX 501?

Jan 8, 2012

I'm a college student working on a lab involving a Cisco PIX 501 Firewall.
 
My project involves 1 computer and a firewall. My goal is to use the firewall to allow access to the internet for that computer which uses a static IP 192.168.1.5 and ONLY for that IP address. The firewall is connected to the internet.
 
I have the computer hooked up to the firewall with the serial and using hyper terminal to enter commands. I think I need to use access lists in order to deny traffic on those ports for those particular hosts. I can't figure out exactly how I need to set it up.
 
What I need to do is permit internet access for 192.168.1.5 alone. Any other IP should not be able to access the internet.
 
I tried:
 
access-list 1 permit tcp host 192.168.1.5 any eq 80
access-group 1 in interface inside
 
I cannot access the internet using the computer with 192.168.1.5. The goal is to be able to access with that IP and no other.

View 6 Replies View Related

Belkin Routers :: N600 - Vista Not Allowing Internet Access - Local Only?

Apr 14, 2013

Installed new N600 router and every box in the house can access the internet - except for my Vista powered laptop. My network shows up as Unidentified network with 'locla only' access. Ben scouring message boards all day. Can't find a solution at Microsoft.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Not Allowing Full Internet Bandwidth

Oct 16, 2011

I have a 100mb conection and regularly get 90mb plus speed when conected direct to the modem. If I conect via the E4200 I only get 50mb ? I have tried disabling the firewall and QOS but this has had no effect. I am using a wired conection and the latest firmware. Its almost as the E4200 is capped at 50mb throughput.

View 6 Replies View Related

Linksys Wireless Router :: EA4500 - Allowing Vizio Internet Apps To Connect From Two Different TV's

May 28, 2012

EA4500 Linksys router stopped allowing vizio Internet apps to connect from two different TV's. Problem, Just got brand new EA4500 router and Motorola SURFboard DOCSIS 3.0 High-Speed Cable Modem Model: 575319-019. I have 2 new vizio big screen tv's with internet apps. All was working fine and had no problems but occasional drops or limited access.
 
One day BOTH TV's could no longer connect. However, The tv's will connect to another access point. therefore the problem does not exist in the TV/s and has to be a problem in my access point (I.E. Router allowing access). Additionally, all other devices connect and work fine. I have already unplugged everything for an extended period of time. Checked for updates on firmware and verified no software needed to be updated. Rebooted router... Am using wpa-psk and feel i shouldn't have to go weep as it was working fine...

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: TD-VG3631 - Router Unresponsive After Upgrade

Mar 1, 2013

Region : France
Model : TD-VG3631
Hardware Version : V1
Firmware Version :
ISP :

I tried to upgrade a TD-VG3631 that came with firmware version TD-VG3631_V1_120929 to the latest TD-VG3631_V1_130108 version.[url]...Is there a recovery procedure to flash back a firmware?

View 2 Replies View Related

Linksys Wireless Router :: EA4500 Unresponsive While Transferring Large Files

Aug 9, 2012

I got a refurbished EA4500 (directly from Cisco) last week. I have been having a few issues, which I have found (not too great) workarounds for. However, the latest issue has me stumped, and is unacceptable.Whenever I am transferring files between 2 computers, I get kind of OK speed (5 MB/s). However, while this transfer happens, no other device can connect to the net. Actually, even trying to go to router home page (192.168.1.1) times out.The clients still say they are connected to the router, but I just can't get anywhere.As soon as the file transfer finishes, everything goes back to normal.EA4500 replaced a WRT54G. Never had any problems with that router. It was such a workhorse. Just needed to upgrade to a n-router.I am on the latest non-cloud firmware.I have reduced the MTU size to 1200. Not sure that matters.

View 9 Replies View Related

Internet Access Stopped - Other PC's On LAN Working OK / General Failure

Aug 19, 2012

I have a new Alienware X51 running Win 7. It's connected to a home LAN, both wired and wirelessly. For the prior two days internet connectivity has been fine. Today, the PC will not connect to the internet. The Network and Sharing center in control panel shows that the PC is connected to both the wireless network and the wired network, but with no internet connectivity. All other computers and devices in the house are able to connect to the internet. Tried restarts, virus scans, router power off/on, ipconfig /release and renew, all with no luck. When I try and ping other computers in the LAN or the router I get a "General Failure" message.

View 8 Replies View Related

Computer Connects To Wifi But Internet Access Stopped After 5-10 Minutes

Mar 31, 2012

My computer connects to an unscured wifi near my home and i have internet acces for a few minuets, then it just stoppes. Sometimes if i reconnect it will run for a few more minuets 5-10. I have tried two different computers with same results. about a month ago the connection worked fine. This just started recently.I can connent and access internet at other public places with no problem. It seems only this network i have trouble with, why?I am running XP on one, and Win 7 on other, same results.I have read alot of things and tried them all,

-resetting internet options
- changing tcp/ip
- system restore with no results.

View 4 Replies View Related

Cisco Switching/Routing :: 2950 Disabling Windows Firewall / Allowing Access Through The Router

Dec 18, 2012

i bought a cisco 2950 series switch to play around with and im trying to set it up to SSH. I have google'd a bit on how to do this and i've sort of hit a wall... i have downloaded the cryptographic image from cisco's website, installed a TFTP server (think this is where my issue lies) but when i do the copy tftp flash global command i keep getting the error accessing "xxxx" message.I have tried allowing the server through windows firewall, disabling windows firewall, allowing access through the router..

View 6 Replies View Related

Linksys Wireless Router :: E3000 Internet Comm Stopped Now Can't Connect?

Jul 6, 2011

Woke up this morning to the friendly 'No Internet access' message in the system tray. Thought it was the laptop but it wound up being the router (I guess).I can connect directly to internet via the cable modem (Comcast) but can't get a connection through the router.There are no IP addresses listed on the router admin page.Renew IP doesn't work.Everything was ok last night. I've had the router for a year or so and except for having to reset it every week or 2 for WiFi connection issues,it's worked pretty well.I soft-reset the router but then couldn't connect to 192.168.1.1.Hard-reset and still can't connect to 192.168.1.1.I do see connection lights. Just can't get to it. 

View 9 Replies View Related

Linksys Wireless Router :: WRT120N Suddenly Stopped Connecting To Internet

Jul 5, 2011

Well, I have a WRT120N Router for 11 months to now. I never had a problem with the Router, but since 2 days ago, It didnt connect to the internet.
 
My network is: Internet > Cable Modem > WRT120N > Computers
 
As I said, the problem is that the Router doesnt has Internet Connection.
 
Things to take in consideration: The Cable MODEM ISN'T the problem Because if i connect the modem directly to a computer, I have Internet connection without problems.I Diconnected and Connected both Modem and Router in several ways and several times, and it doesnt work.I also tryed clonning my PCs MAC address to the Router and it was the same.The Router Indeed receives the External IP Address from the Modem, and also, it changes if i restart the modem (as my ISP IP is DHCP). But there is NO internet conection.The Router had the 1.0.05 Firmware, and i upgraded to 1.0.06, and the problem persists.  Another thing to take in account is that if I turn off my modem and the I turn it On, sometimes, the router receives Internet connection, but in matter of Seconds (minutes as much), the internet connection falls.
 
This is NOT an ISP problem, because as I said, if I connect the Modem Directly to any PC, i have a perfectly normal Internet Connection, And also, I called my ISP and they Said me that there werent any problem on their network.
 
I have also tryed with the "Router Dianostics" (the Ping and Traceroute options that are in the Router's Webend and also, no conection. So its NOT a Cables problem.

View 1 Replies View Related

Linksys Wireless Router :: WRT54GH Internet Port Has Stopped Working

Sep 13, 2012

i am a using a WRT54GH linksys router.. which was working fine for a year.. there was thunderstorm and lightning a few days back.. since then my routers internet port (the first port which says internet in yellow) has stopped working..

View 5 Replies View Related

Linksys Wireless Router :: E4200 Internet Stopped Working On Laptop

Jul 11, 2012

I purchased an e4200 about 6 months ago and it worked great until the other night the Internet stopped working on my laptop (wireless). I tried unplugging both my modem (Motorola Surfboard) and router and plugging them back in, but no luck. I can accesss the Internet when plugged directly into the router (with both my PC and laptop), so it looks like the issue is with the e4200. To make matters worse (and I fear much worse), I can't even access the admin page to the router through either the Cisco Connect software or through the IP address. I've tried resetting it, I've tried the 30/30/30 reset (holding the reset button while doing an unplug and pluging back in), and reinstalling the Cisco Connect software, all to no avail.
 
I've found threads where others have not been able to access the admin page, but they still had access to the Internet url... I haven't found a similar thread where the router doesn't seem to work at all. A few other bits of information I can think of (let me know if there's other information I can provide):The Cisco logo light flashes slowly after reset which I believe is expected.The lights in back of the router seem to work as intended.Running Windows 7 Diagnostics finds the connection "doesn't have a valid IP configuration" and "The default gateway is not available."

View 9 Replies View Related

Linksys Wired Router :: BEFSR41 Disconnected From Internet While Allowing UPNP

Oct 29, 2011

I have a Linksys router (model BEFSR41) and I all the outputs going to two computers and two gaming systems (X360 and PS3). I have had the router for over a year and it works fine, but I recently decided to attempt to have my 360 access the media on my computer by linking the two together through the Media Center. To do this, I needed to enable my router to allow UPnP (according to Microsoft help). When I did enable this, the router would disconnect me every 2-5 seconds from the internet, then would reconnect me right away.I have no clue why it was doing this (it occured across all of my devices) so I just disabled UPnP and things went back to normal. How to fix this so that I can have a consistent and stable connection when I have UPnP enabled? 

View 1 Replies View Related

Wireless Connection Not Allowing To Connect To Internet

Mar 4, 2012

got an old computer to use from a family member and it is not alowing me to connect to the internet. it shows all my wireless connections but wont alow me to connect and use the internet. how do i fix this problem?

View 1 Replies View Related

TL-WR542G - Tplink Router Became Unresponsive?

Jun 18, 2012

So I am an owner of this router for the last 2 years: TL-WR542G - Welcome to TP-LINK . Today it died on me. All of its leds are lightning up, but it doesn't provide a wifi network, and won't give me an interface when i try to access it through 192.168.1.1 on my desktop . There seems to be nothing I can do about it , I tried pushing the reset button on it's back but it does nothing at all.

Do I have any other options to get some life back into it?

View 1 Replies View Related

Cisco WAN :: 871 - Getting Locked Out Of The Router / Unresponsive

Mar 13, 2013

I am attempting to replace my actiontec router with the Cisco 871 I have little expirience with CLI-IOS so I was trying to use sdm express that failed to load and when I finally got it to load it still didnt work and I ended up getting locked out of the router it was totally unresponsive.  So I did a reset and now am attempting to use the Cisco Configuration Assistant to set up my wan connection but it have been loading security related data for 15 minutes and I have a feeling it's not doing anything at all.  I don't understand what I'm doing wrong....  Any advice.... I just was trying to get a default set up that would give me internet access Im not trying to enable any of the security functionality at this point.

View 0 Replies View Related

Cisco Firewall :: ASA 5520 - Allowing Guest Wireless Network Access To Internal Subnets

Jan 23, 2012

We have a Cisco wireless infrastructure in place that includes a guest network with its own subnet that is a sub interface of the inside interface on our ASA 5520.  There are no routes for it to be allowed access to the internal subnets.  So it can only access the internet.  This is primarily used by the public, but we have several non employee personnel that we only want to give internet access and force them to access the internal network through our clientless SSL vpn portal or through other internet facing internal resources such as webmail.I have done packet traces from within the ASA and the break appears to be there is no ACL allowing the traffic back into the network once the web resource replies to the request and the traffic is attempting to come back into the network from the web resource.  Is that as clear as mud?
 
I know that this has to be a common problem and a way around this is to allow the guest wireless network access to the internal network but only for the select resources that they require.  And that this can be done seemlessly by network specific routes and or alternate DNS entries, but I would like to keep this simple and just allow them to access the web resource, webmail and VPN, from the guest wireless using internet DNS servers without route trickery.

View 8 Replies View Related

Router And Internet Stopped Communicating?

Apr 27, 2011

My wireless router stopped working. When I plug directly into the modem the internet works finely.

View 2 Replies View Related

Multiple Private Networks Allowing Access To Printer?

Apr 10, 2013

I am looking to create an office network with each person having internet access but on a private network. however everyone will need to be able to access a communal printer. would they be able to see it if they were all on a different subnet or would i need to set up vlans?

View 4 Replies View Related

Cisco Firewall :: Allowing FTPS Access In ASA5510

Apr 13, 2012

We had an ASA 5510 as a firewall in our environment, and there is a requirement to access an ftps server from our location. Currently from the server location they configured everything by allowing our public ip to their server and gave the following details to access ftp.Please suggest which traffic needs to be allowed in our ASA to access the ftp server address as mentioned above. From my initial analysis, it's found that 989 port is also enabled for the access, but that was not mentioned by them.

View 1 Replies View Related

Cisco Firewall :: ASA 5550 - Acl Allowing Guest Access

Jan 26, 2012

I have an ASA 5550 at our main site with an external ethernet interface to our ISP for internet access.  I would like to allow 10.100.41.x/24 http / https access but block this network's access to all other internal networks including 172.17.x.x,,  10.100.1 - 40.x, and others.  I'm having trouble identifying what IP address to use as the desitination for the permit rule for access to the internet.  The rule that comes after the permit is to deny 10.100.41.x/24 access to internal network addresses. 

View 1 Replies View Related

Linksys Wireless Router :: WRT54GH-SG Not Allowing To Logon

Nov 16, 2010

I'm not able to logon to WRT54GH-SG over 192.168.1.1. I'm using correct password & have NOT forgotten. I'm hitting 401 page. The support rep told me reset the router which I do not want to before I explore any possibilities.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved