Linksys Wireless Router :: E4200 - Stopped Allowing Traffic Through Ports Completely

Apr 24, 2013

I posted my complaint on Amazon.com recently.  My E4200 router stopped allowing traffic through ports completely.  I was able to unplug the power and allow the router to cool, and the router would work for a while then stop after about 10 minutes.  I assume that the unit was overheating, but I do not have the equipment of a test facility.I bought a Belkin AC 1200 router which is a bit of an upgrade from Amazon.com.  I do not think that there is anything that Linksys can do for me as my warranty expired.  I just thought that when I spent what was to me a lot of money the router should have lasted longer.

View 5 Replies


ADVERTISEMENT

Linksys Cable / DSL :: WAG120N Router Has Stopped Working Completely

Jun 26, 2012

My WAG120N router has stopped working completely. None of the Ethernet ports or the wi-fi signal button is lit,power light continues to blink for 10 odd mins and then comes to a rest. Tried to login to admin portal without any success, tried to reset it pressing the reset button in the back without any success.Tried the 30-30-30 reset method without success too.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Completely Quits Periodically

Sep 14, 2011

I purchased an E4200 from a retail store about ten days ago.It completely quits periodically. Even the managment interface is gone. It seems to just die. The only fix is to unplug it, count to ten and plug it back in.router also gets extremely hot. I have tried locating it in several places, no matter where I put it, it still gets very hot. Right now I have it straddling a trash can so that it has about two feet of air space under it. It is still uncomfortable to the touch.
 
When I contacted technical support all they would do is walk me through setting it up from scratch again. I've done that many times, and I do not want to do it agian. Setting the router up agian will not make it cool down.
 
1. Exchange this for another one, probably from the same batch, at the store?
2. Fight with Linksys tech support to get a waranty return? (Any input on how to get them to do this?)
3. Return this router altogether (paying the retailer's 15% restocking fee) and look for another brand?

View 8 Replies View Related

Linksys Wireless Router :: E4200 Not Allowing Full Internet Bandwidth

Oct 16, 2011

I have a 100mb conection and regularly get 90mb plus speed when conected direct to the modem. If I conect via the E4200 I only get 50mb ? I have tried disabling the firewall and QOS but this has had no effect. I am using a wired conection and the latest firmware. Its almost as the E4200 is capped at 50mb throughput.

View 6 Replies View Related

Linksys Wireless Router :: E4200 Can Wireless Be Turned Off Completely?

Dec 18, 2011

On the E4200, can the wireless be turned off completely? I am no longer using any wireless devices and thought that if I can turn off or disable all wireless functionality it might be more secure and run cooler.  Short of that...what settings can I use that would prevent any wireless device from gaining access?

View 2 Replies View Related

Linksys Wireless Router :: Allowing PPTP Traffic To Server Behind WRT320n?

Mar 7, 2012

I am trying to allow PPTP traffic through my Linksys WRT320n to a PPTP VPN server on my home network.The Linksys WRT320n is running firmware 1.0.05 build 002Mar 31, 2011.I have created a Port Forwarding rule on the Linksys to allow TCP & UDP port 1723 through to my internal IP of the PPTP VPN server,but everytime I try to connect with a PPTP client from outside of my network I get a connection error on the client.Checking the PPTP VPN servers logs I see the following errors (Please note all IP's have been masked) Mar 2 11:15:07 ap-01 pptpd[5300]: CTRL: Client x.x.x.x control connection startedMar 2 11:15:07 ap-01 pptpd[5300]: CTRL: Starting call (launching pppd, opening GRE)Mar 2 11:15:07 ap-01 pppd[5301]: pppd 2.4.4 started by root, uid 0Mar 2 11:15:37 ap-01 pppd[5301]: Exit.Mar 2 11:15:37 ap-01 pptpd[5300]: GRE: read(fd=8,buffer=41fe30,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logsMar 2 11:15:37 ap-01 pptpd[5300]: CTRL: PTY read or GRE write failed (pty,gre)=(8,9)Mar 2 11:15:37 ap-01 pptpd[5300]: CTRL: Reaping child PPP[5301]Mar 2 11:15:37 ap-01 pptpd[5300]: CTRL: Client x.x.x.x control connection finished
 
From looking at the above errors, it seems as if the Linksys isn't forwarding GRE through to my PPTP server.I have tried various settings, including enabling and disabling the PPTP Passthrough option on the Linksysbut still can't get PPTP to work.What is the correct way to get GRE traffic forwarded through the Linksys?

View 4 Replies View Related

Unresponsive Router - Stopped Allowing Wireless Internet Access

Nov 3, 2012

My Netgear wireless router had been working just fine and then inexplicably stopped allowing wireless internet access. My modem is fine. I contacted my internet service provider, and no luck. I unplugged the router's power source and plugged it back it in. Still not working. I switched the power on and off. Nothing. I do not know what to try next.

View 1 Replies View Related

D-Link DIR-655 :: Router Stopped Working Completely

Jul 21, 2011

I bought the DIR-655 less than a year ago in Amazon, shipping it to NY. And then I came back to Uruguay. Almost 3 months ago the router stopped working completely and I started to search for support in Uruguay.After calling US support I was told I should contact the local or regional D-Link (which I later found is D-Link LA). And via DLinkLA.com I found the company TELEDATA S.A. url... who does the official support for D-Link in Uruguay. They told me the router couldn't be fixed, and told me DLinkLA, which is based in Chile, would either send me a working one (they also told me the service/warrany was already approved), or send me the money and gave me their contact details.After two weeks of contacting them, trying to get their attention, they finally told me it was not their responsibility because it was bought in the US. And now they don't return my e-mails.

View 5 Replies View Related

Linksys Wireless Router :: E4200 Internet Stopped Working On Laptop

Jul 11, 2012

I purchased an e4200 about 6 months ago and it worked great until the other night the Internet stopped working on my laptop (wireless). I tried unplugging both my modem (Motorola Surfboard) and router and plugging them back in, but no luck. I can accesss the Internet when plugged directly into the router (with both my PC and laptop), so it looks like the issue is with the e4200. To make matters worse (and I fear much worse), I can't even access the admin page to the router through either the Cisco Connect software or through the IP address. I've tried resetting it, I've tried the 30/30/30 reset (holding the reset button while doing an unplug and pluging back in), and reinstalling the Cisco Connect software, all to no avail.
 
I've found threads where others have not been able to access the admin page, but they still had access to the Internet url... I haven't found a similar thread where the router doesn't seem to work at all. A few other bits of information I can think of (let me know if there's other information I can provide):The Cisco logo light flashes slowly after reset which I believe is expected.The lights in back of the router seem to work as intended.Running Windows 7 Diagnostics finds the connection "doesn't have a valid IP configuration" and "The default gateway is not available."

View 9 Replies View Related

Linksys Wireless Router :: E4200 Wired Connections Stopped Working?

Jul 31, 2012

My router was working just fine forever, the only computer that will connect VIA wire is my desktop, everything else for it to connect to my network it has to go wireless. Things like my blu ray player just will not connect. I am not an expert at all, but why is only the wireless working? I can use the Cisco connect and adjust the settings if need be.

View 5 Replies View Related

Linksys Wireless Router :: E4200 Gigabit Ports Not Working?

Feb 17, 2011

I just upgraded to an E4200 from a D-Link DIR-655.  I cannot seem to get my desktop to connect to the E4200 at 1 GBS.  My adapter is set to "auto negotiate" but will only connect at 100 MBS.  If I try forcing the adapter setting to 1 GBS, it never connects.  I can swap out my E4200 with the DIR-655 and it will connect at 1 GBS just fine.  I am using a CAT 5E cable.  Is there something I'm missing here or is the E4200 just more finicky than the the DIR-655?

View 9 Replies View Related

Linksys Wireless Router :: E4200 Gigabit Ports Connecting To PC And NAS

Jan 19, 2012

Have the issue of connecting a pc an NAS to a E4200 and when transferring from pc to NAS, only getting < 10 mbps transfer rates? NAS is Dlink 321. PC has Gigabit ethernet card. cables are cat 6. Even when I force the NAS and pc network card speeds to 1.0 GBps full duplex, I only transfer files at < 10 Mbps.

View 3 Replies View Related

Linksys Wireless Router :: Open Specific Ports On E4200?

Mar 5, 2012

How do I go about opening specific ports on an E4200?I'm having disconnect issues with a particular game, and the Customer Service drone thinks the ports required for the game aren't open. Nevermind the fact that it's worked fine for 6 months now, and the problem only started a few days ago.I figured I'd humor the idiot and open the ports, but all I can find is information on forwarding, not making sure the ports are open

View 3 Replies View Related

Linksys Wireless Router :: E4200 Ethernet Ports Stop Working?

Oct 27, 2011

I've lost connectivity with all but one of the ethernet ports on my E4200 router.  My desktop PC was connected to Port 1 but stopped working.  Network troubleshooting via my Windows 7 Dell 8300 said I was not connected and to check the cable.  I did that with several different cables and tried the usual router and modem reset.  Only through trial and error did I find that I could connect to port 4 which is why I am able to write this post.  What could have changed to disable ports 1-3 and can I get them working again?  No issues with wireless connectivity.

View 3 Replies View Related

Linksys Wireless Router :: E4200 - Force A Specific Speed For The Local Ports?

Sep 14, 2011

Is there a way to force a specific speed for the local ports?  I'd prefer not to rely on the autonegotiation. 

View 5 Replies View Related

Cisco :: 1811W Stopped Allowing Wireless Connection Of Domain Laptops

Nov 8, 2011

I have a Cisco 1811W that after several years in service suddenly stopped allowing any wireless connection to laptops on the domain. It allows hard wired connections and devices that are just using the wireless hot spot like iPads and Iphones but not devices on the domain. These same laptops connect wirelessly without issue at our other facilities which use the same hardware.
 
Here is the config file of the router in question...
 
router#show run
Building configuration...
Current configuration : 11776 bytes

[Code].....

View 2 Replies View Related

Wifi Has Completely Stopped Working?

Sep 11, 2011

I currently own a Sony Vaio Laptop that has been working fine for the last 2 years, I was happily on facebook when all of a sudden, my laptop started lagging massively and it disconnected me from wifi, I was shocked to find that when I tried reconnecting, the laptop decided to stop working for a second and my wifi stopped working completely, every time I disconnect the Ethernet cable from my laptop even though my wireless switch is on, it won't even pick up my Virgin Media superhub I have about 5 meters from my laptop, it indicates that there is NO wifi anywhere, just the ascending bars with a big red X on it

View 1 Replies View Related

Linksys Wireless Router :: Configure One Of GigE Ports On E4200 To Only Work On Guest Network

Mar 17, 2012

Is there a way to configure one of the GigE ports on the E4200 to only work on the "guest" network?  Basically I have a need to setup one of those ports to get to the Internet, but I don't want it to be able to get to anything else on the private side. 

View 1 Replies View Related

Linksys Wireless Router :: E4200 Loose Ability To Use Internet On Wired / Wifi Ports

Sep 6, 2011

As soon as i modify my wireless to be unsecured, I looy ability to usse me the internet on all wired ports as well as all wireless.  From the routers point of view it still has a good solid internet connection.  Passes traceroute, but wont allow any wired or wireless connections on the internet.  I'm trying to get a Linksys WRE54G v1 to work with this so my parents can have internet once more.  If i manualy remove the security to allow the one touch Auto configuration button to work i loose my ability to surf until i run the Cisco Connection software to turn back on the passwords.

View 7 Replies View Related

Connected But Internet Completely Stopped Working?

Nov 5, 2011

I was surfing the web one night and noticed that it was getting late so I turned my computer off.... I get back on in the morning after to find that my internet has completely stopped working. I tried everything like restarting, system restore[CODE]

View 1 Replies View Related

Linksys Wireless Router :: E4200 Rebooting Every Time It Sees Traffic On Any Port

Jun 15, 2012

My E4200 is rebooting every time it sees traffic on any port, including the internet port. It does not reboot itself if there is nothing plugged in.
 
Already tried: soft reset (power off for 30 seconds), soft reboot via back panel button, hard reset (press reset for 30, unplug and hold reset for 30, plug in while holding reset for 30).

View 9 Replies View Related

Linksys Wireless Router :: E4200 Allow VPN Connection / No Traffic Passes Can't Ping Across Tunnel

Oct 28, 2011

I have recently purchased a E4200 i have flashed it with the latest Firmware 1.0.03 and Hard Reset the Router so the Media issue was resolved i was having. After upgrading the firmware to the latest version my Nortel VPN IPSEC Client no longer will work. The tunnel is connected and it passes traffic for about 15 seconds then nothing.  The connection remains connected but no traffic passes cant ping across tunnel.  I have checked all the settings and VPN - IPSEC - Passthru is enabled.   I have put the client in DMZ mode and tried that same thing.

View 7 Replies View Related

Linksys Wireless Router :: E4200 Block Traffic At Certain Times Uses Both Parental Controls / Internet Access Polices

Oct 21, 2011

I have configured my e4200 to block traffic at certian times uses both the Parental Controls and the Intenet Access Polices.  Neither one seems to work though.  [code] I have the same MAC addresses specified in each rule.  Initally I had only the first two rules.  Those didn't work, so I added rule 3 and 4 (they do the same thing as rules 1 and 2 but from the opposite direction).  There are no compliaints, but they don't stop any traffic. 
 
I started with the Parental Controls, they didn't work either.  The page in there that lets you pick which machines you want to block seemed next to worthless.  I have about four rows listed as "Network Device."  REALLY LAME!  As the MAC addresses are accesible and these weren't working I went to the IAP. 

View 5 Replies View Related

Turn Off Wireless Network Of Linksys E4200 And Use Only 4 Ports?

Feb 23, 2012

Can I turn off the wireless network of linksys E4200 and use only the 4 ports? using the router like a 4 port switch?

View 2 Replies View Related

Linksys Wireless Router :: WRT300N Dropped Connection Completely

Jul 4, 2011

I've had this WRT300N for several years and it has worked very well.It suddenly dropped all wireless connections and no one can re-connect.  My main pc is hard wired directly to the router and works perfectly as always.  3 wireless pc's and 3 handheld devices suddenly can't connect. I've powered down my modem and router for several minutes, but nothing changed.  The firmware was upgraded a long time ago and there are no other upgrades available.

View 7 Replies View Related

Linksys Wireless Router :: E2000 Firmware Update Crashed It Completely?

Mar 3, 2011

I've just been on the phone with tech support and it appears that the latest firmware that Cisco Connect is stating that one should install is faulty and is bricking routers.
 
I've tried resetting it, holding the reset button while powering up for over 5 minutes with no change.
 
All the router does now is the power light is blinking but no access to the router is possible at all.

View 2 Replies View Related

Linksys Wireless Router :: WRT54G Signal Vanishes Completely / Keeps Dropping Connection?

Dec 26, 2012

My old WRT54G V8 router has been acting up lately. It keep dropping the connection out of the blue. Sometimes I'd be browsing the Internet when the router's signal vanishes completely, it disappears from the list of available wireless networks on not just my computer, but my smartphone and all other devices in the household! Other times I keep connected to the network but there's no access to the Internet. Everything seems fine on the ISP's part, I can connect just fine directly from my modem, so I'm certain the problem is with the router. Besides, these problems are solved by just power cycling the router.

View 4 Replies View Related

Linksys Wireless Router :: WRT54GS - Reset Security Button Completely Shut Out Connection

Oct 3, 2011

I was in the Wireless tab>Basic Wireless Settings and then I clicked the "Reset Security" button.  I don't know what that did but I've been completely shut out of my connection ever since and I don't know how to fix it. I tried doing the install sequence of the router just now (Clone MAC address, then release and renew DHCP, power cycle modem, router, and PC) but it still didn't work.

View 1 Replies View Related

Linksys Wireless Router :: WRT54GH-SG Not Allowing To Logon

Nov 16, 2010

I'm not able to logon to WRT54GH-SG over 192.168.1.1. I'm using correct password & have NOT forgotten. I'm hitting 401 page. The support rep told me reset the router which I do not want to before I explore any possibilities.

View 8 Replies View Related

Linksys Wireless Router :: E2000 Not Allowing Access To Other Devices

Nov 5, 2011

I just set up my e2000 on a PC using Windows 7.  I am additionally trying to set up additional devices on the network.  The two that I am currently working with are:Dell Latitude d240 running Windows XP.HTC Evo smartphone running Android
 
I can't get these on the network through the e2000.  They can access the internet through the e2000 but only as a guest and therefore don't have the same level of security.  What do I need to do to successfully put the above devices on the network?

View 2 Replies View Related

Cisco :: Allowing Traceroute Traffic Through ASA?

Apr 24, 2012

I need to allow traceroute traffic through ASA running version 8.0.2.This traffic is natted. what configuration is required on ASA to allow this natted traceroute traffic.Traffic is coming from inside and going outside.Also can we capture this traceroute traffic on asa using capture feature.

View 12 Replies View Related

Linksys Wireless Router :: EA3500 USB Not Allowing External Hard Drives?

Jun 12, 2012

Similar to this issue with the EA4500 - I have the same issue with maping the drives from both PC and Mac - the USB drive is recognized, admin/user names are coreated appropriately, the folder structure is imported into the admin control..similar issue with EA4500 user here

View 3 Replies View Related

Linksys Wireless Router :: EA4500 USB Not Allowing External HD Only Flash Drives?

Apr 16, 2012

Recently purchased an EA4500 router and it is connected to the Internet.  One of the reasons we purchased this router was to take advantage of the usb port (only 2.0 unfortunately) to be able to share media across the network.  I spent over two hours on the phone (4/16/2012) with Linksys Tech support trying to get this feature to work.  When using a little flashdrive I can easily find the connected usb device.  However, when trying to connect to an external hard drive, it will not connect.  I tried three different external hard drives, a Western Digital 500 GB Elements drive, a Western Digital 2 TB My Book Elements drive and even a portable 1.5 TB Seagate FreeAgent drive.  Every drive had the same result.  In fact after plugging each one into the EA4500 and then selecting Safely Eject and then plugging them into my computer, each one had to go through the Fix process in order to work again.  I tried this several times.  Linksys Tech Support could not get it to work either, and they even used remote access.  When going into the web interface of the EA4500, the router sees the external drives attached to it.  However, only the little 16GB flash drive can be seen by the computer.  I know there is a list for approved devices that work with a different device, the E4200 [URL]
 
It looks like my devices are there but nonetheless its not working.  Really not sure why the router can see all of the devices but only the computer can see the flash drive.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved