Cisco :: 1811W Stopped Allowing Wireless Connection Of Domain Laptops

Nov 8, 2011

I have a Cisco 1811W that after several years in service suddenly stopped allowing any wireless connection to laptops on the domain. It allows hard wired connections and devices that are just using the wireless hot spot like iPads and Iphones but not devices on the domain. These same laptops connect wirelessly without issue at our other facilities which use the same hardware.
 
Here is the config file of the router in question...
 
router#show run
Building configuration...
Current configuration : 11776 bytes

[Code].....

View 2 Replies


ADVERTISEMENT

Unresponsive Router - Stopped Allowing Wireless Internet Access

Nov 3, 2012

My Netgear wireless router had been working just fine and then inexplicably stopped allowing wireless internet access. My modem is fine. I contacted my internet service provider, and no luck. I unplugged the router's power source and plugged it back it in. Still not working. I switched the power on and off. Nothing. I do not know what to try next.

View 1 Replies View Related

Linksys Wireless Router :: E4200 - Stopped Allowing Traffic Through Ports Completely

Apr 24, 2013

I posted my complaint on Amazon.com recently.  My E4200 router stopped allowing traffic through ports completely.  I was able to unplug the power and allow the router to cool, and the router would work for a while then stop after about 10 minutes.  I assume that the unit was overheating, but I do not have the equipment of a test facility.I bought a Belkin AC 1200 router which is a bit of an upgrade from Amazon.com.  I do not think that there is anything that Linksys can do for me as my warranty expired.  I just thought that when I spent what was to me a lot of money the router should have lasted longer.

View 5 Replies View Related

Cisco Wireless :: 4400 - Laptops Unable To Access Domain

Dec 22, 2011

We have a several cisco 4400 wireless controllers and a cisco WLC. All clients autheticate to an AAA server. Acces points are cisco LWAP 1242. Security is PEAP TKIP ms-chap. Machine and user authetication. Settings are pushed out through grou policy. A new user can log on to a laptop (without cached credetials) and get all their network settings....most of the time. Randomly we have laptops that after being restarted, recieve "yourdomain.com is not availalbe" error message. The laptops will work fine for weeks and then random laptops start to get this error. If we wire them into the network, run a gpupdate, they logon fine. Shutdown, unplug, and the wireless works fine again.. I am not sure if this is an ms group policy issue or a wireless issue. Any setting change or a gp setting that I may have missed??
 
Clients are mostly windows 7 some XP Domain Windows 2008r2
 
ACS 4.2
 
Group policy settings - wifi config settings enabled and configured correctly Always wait for network enabled.allow fast reconnect disabled (was recommended by a cisco tech) Disabled computer passwords for domain about 2 months ago to see if the computers reseting their passwords were an issue.

View 8 Replies View Related

Cisco WAN :: 1811W Connection Won't Come Up

Jul 24, 2011

Cisco 1811 device.  Working great with connection from TWTELCOM, trying to add 2nd connection from BRTHOUSE set SLA's and metrics but config still isn't working.  The connection won't come up and when I do show ip route ip address it doesn't show a metric so neither connection has a priority and the connection fails.  I want brighthouse to have priority as shown with SLA's but if brighthouse fails I want it to go back to twtelcom. [code]

View 1 Replies View Related

Wireless Connection Not Allowing To Connect To Internet

Mar 4, 2012

got an old computer to use from a family member and it is not alowing me to connect to the internet. it shows all my wireless connections but wont alow me to connect and use the internet. how do i fix this problem?

View 1 Replies View Related

Wireless Connection Between Two Laptops?

Dec 22, 2012

I would like to use internet connection by using one modem between two laptop. How can I do that?

View 1 Replies View Related

D-Link DIR-655 :: No Internet Connection On PC But Fine On Wireless Laptops

Feb 16, 2011

I had to reboot my Dir 655 because my 2 wireless laptops wouldn't connect to the internet.  Once I reset all of my static IP settings in the dlink admin tool the wireless laptops work fine.  The problem now is that I can't connect to the internet on the computer that is hard wired into the router. I recall once before having to adjust the TCP/IP settings in the Network settings,  but don't remember exactly what it was the I had to do.

View 15 Replies View Related

D-Link DIR-615 :: Wireless Laptops Loose Network Connection?

Jun 30, 2011

I have battling this issue since I bought this router, at least 2 years.

Using:

DIR-615
PC XP Wired
2 Acer laptops Vista wireless
All DHCP reserved
Security using wpa_psk

Not sure what other router info you need. All are connected to the internet, but can't see each other on the LAN. We can see each other from time to time. Sharing is allowed. Passwords are shared. I can power off the router and the network will be fine for about a day, then gone again. Workgroups are the same.

View 14 Replies View Related

Changed Password To Wireless Connection - Can't Do It In Laptops Network Settings

Jan 29, 2013

I changed my password to my wireless connection and now I can't change it in my laptops network settings

View 7 Replies View Related

Wireless Router - Enable Both Laptops To Use The Internet Connection At The Same Time?

Jun 15, 2011

I have two laptops which connect to the router via wireless. This router is wired to the modem. I can connect each laptop to the router then make an internet connection. This works fine. But if one laptop is connected to the internet, then the other cannot. I have to disconnect the first laptop then reconnect with the second.

I have had this scenario working in the past and can't remember what I have to do to enable both laptops to use the internet connection at the same time.

View 4 Replies View Related

Cisco WAN :: 2800 - Allowing Vpn Connection Out To Extranet

Aug 25, 2011

We have a cisco 2800 router and are now required to allow users to be able to connect to another company's extranet. Having tried this it wont allow this connection so I have added this to the access-list 101

access-list 101 remark SDM_ACL Category=0
access-list 101 permit ip any host 192.168.0.246
access-list 101 permit ip any host 192.168.0.247

[Code].....
 
I dont think the gre is being allowed back in. I have attached a cut down copy of the config. I have just general experience of cisco routers and not cisco qualified.

View 2 Replies View Related

Wireless Connection Suddenly Stopped Working In One Room

Aug 8, 2012

Three nights ago, around 9:30 P.M PST, my wireless connection to my router began constantly dropping every few seconds/minutes. This happens to all of my wireless devices only while I am in my bedroom, nowhere else. In every other room, my connection is stable.

Connection Issue: Wireless
ISP: Comcast
Router Model: Netgear N300 Wireless Gigabit Router WNR3500U/WNR3500L

[Code].....

View 5 Replies View Related

Netgear Dg834Gv3 - Wireless Connection Has Stopped Working?

Oct 31, 2011

My internet went down temporarily last week and ever since my computer has not been able to maintain a connection. It will pick up the signal intermittently but produce painfully slow internet and then promptly lose the signal all together. The wireless connection is working perfectly on laptops and smart phones, even when in the same position from the router as my PC.

Router: Netgear Dg834Gv3
Wireless Adapter: Netgear WG111v3 USB
Computer: Dell Vostro 200
ISP: AOL

View 2 Replies View Related

Cisco Switching/Routing :: RV180W Not Allowing Internet Connection?

Mar 4, 2013

I recently saw it for a good price online, and required a new router (had a netgear that died, and my backup was a really buggy Belkin which I'm currently using).I'm having an issue with the internet, in that when I connect my ADSL modem to the WAN port it seems to work fine, however the PC can't connect to the internet. When I go into the settings it says that the WAN connection is OK and even shows my external IP. I have it set via the stardard DHCP setup.Should I have done anything specific to my ADSL modem before plugging it into the RV180W? The Modem (D-Link 320B) also has a DHCP server on it, however I assume that this causes no issues when connected to the RV180W.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G Wired Connection Stopped Working?

Jun 24, 2012

I have the WRT54G router for years and use it to provide both a wireless network for our home computers and a wired network for by internet phone that connects me to my office phone system and for my work computer and printer. Last week, the wired network stopped working. I checked the wiring and plugged my wire into all four of the ports in the back of the router with no success.  I followed the troubleshooting procedure that I found and changed the MTU setting.  I tried to update the firmware but the screen seemed to lock up and I was unable to complete the task.

View 9 Replies View Related

Linksys Wireless Router :: WRT400N Stopped Working With Ethernet Connection?

Jul 28, 2011

I've had the WRT400N for about a year and a half now and just last night it stopped sending out data when connected to my cable modem. I've tried connecting the modem directly to my Mac and it works just fine (that's how I'm sending this message now). But when the modem is connected to the router, I get no data. It connects to both the 5 Ghz and 2.4 Ghz networks, but it refuses to send data through the pipe. I've tried power cycling both the modem and the router to no avail.

View 1 Replies View Related

Cisco Wireless :: 1811W Router - Convert To Lightweight?

Nov 11, 2012

We have a couple of smaller remote locations running cisco 1811W routers (built in switch ports & wireless).Now I have been tasked with determining if the wireless portion can be converted to Lightweight or not; if so what is required.
 
I am running
WCS 7.0.230.0
WLC 5508 (same code)

View 3 Replies View Related

Cisco Wireless :: Base Configuration For 1811w Router?

Mar 2, 2009

Need basic wireless configuration for a SOHO Cisco 1811W router?  I just need the wireless to connect to the base wired LAN - with both WEP and MAC authentication.  And - can the MAC auth. parameters be configured via CLI and not have to use either SDM or CP?  I can access the router via SDM - but the Wirless Application will not fire up - and CP doesn't work at all.

View 18 Replies View Related

2 Laptops - 1 Keeps Losing Connection

Jan 29, 2011

I have 2 Laptops connected wirelessly, 1 Vista, the other Windows 7. The Vista laptop seems to be dropping the connection,when I look at 'Network & Sharing Centre on the Vista laptop, it's telling me signal strength excellent but with a red cross indicating there is a break between me and the internet. HOWEVER, the windows 7 laptop (on it now) is working perfectly OK!!

View 3 Replies View Related

Cisco Wireless :: Setting Up 1811w Router For Accessing Internet

Oct 19, 2012

I am setting up 1811w router for accessing internet.DHCP is configured on it but it is not providing IP to laptop connected on port fa6. [code]

View 3 Replies View Related

Cisco Wireless :: Guest-mode Command In 1811W Router

Oct 22, 2012

Need to confirm purpose of command below
  
dot11 ssid TEST                             
   vlan 4                                            
   authentication open
   authentication key-management wpa
   guest-mode    ?????
 
Why we need guest-mode command in above config?

View 5 Replies View Related

Cisco Wireless :: Sh Dot11 Associations Client Command On 1811w?

Oct 23, 2012

Wireless is working ok on 1811W.Need to know from command output below what values are considered  good for power and signal strenghts
 
1811w#sh dot11 associations all-client
Address           : 40fc.894e.c48c     Name             : NONE
IP Address        : 192.168.98.2       Interface        : Dot11Radio0
Device            : unknown            Software Version : NONE

[code].....
 
Also what is Association ID  mean in above output?

View 5 Replies View Related

Same LAN Laptops Disconnected And Cannot Regain Connection?

Aug 26, 2011

I have a small network, about 35 computers.There is 20 LAN PC computers (they use dns, active directory, dhcp), and there is 10 laptops. They connect on same D-Link wireless router( radius server authentication).After most of laptops is operational(connected on wireless router and on domain ), same two laptops always disconnect, and they can't regain connection . All laptops also get their ip addresses through dhcp.I tried all kind of wireless router configuration, I don't think it is dhcp or dns server problem, remote access policy is also very simple

View 13 Replies View Related

LAN Connection Doesn't Work With Other Laptops?

Oct 12, 2012

We recently acquired an internet connection. Connecting via LAN works fine for me but not to my room mates. We're all using Windows 7. Windows troubleshoot it and says "Local Area Connection doesn't have a valid IP configuration" on their laptops. What should we do?

View 5 Replies View Related

Laptops Internet Connection Keeps Fluctuating

Jun 5, 2012

my computer is a laptop and its about 3 years old. Ive been experiancing problems with my internet connection...It seems that it is fluctuating between local and internet to just local every 5 minutes or less. Usually I fix problems with my software no problem this time

View 11 Replies View Related

Laptops Losing Connection On My Office Network?

May 17, 2011

I have 2 older xp pro tough books that connect to my domain via a pair of versa vx 400 access points. automobile technicians use these computers to communicate with cars via a separate wireless card and WiFi device (SPX MVXI) that broadcasts a wireless signal.they always connect just fine to the network but sometimes they drop there connection and don't rejoin which screws up my scheduled tasks (nightly upload). They will reacquire the connection every time if i select it again manually in the windows wireless config.here is what I have done so far

1. set up exclusion range in DHCP distribution on my DC

2. set the laptops up with static IP's within the exclusion range.

3. configured the laptops to auto connect to the network even when its not broadcasting

4. set the access points on channel 7, and the devices on 1 and 11.

I have done a lot of research on this issue, a rep from versa told me that Intel proset wireless isn't very compatible with there product which i this is BS since it does the same with with the netgear WiFi PC cards.

View 11 Replies View Related

Various Laptops Will Not Connect To Wifi / Local Connection Only

Dec 12, 2011

Me and my girlfriend moved into our new flat in September and since then we've been sharing my laptop as her laptop refuses to connect to our Wi-Fi, we are with Virgin Media and I have had literally no connection problems whatsoever but hers gives us various errors like 'No Internet Access' 'Local Connection Only' and sometimes it will connect for about 4 minutes and then just disconnects again, the only Anti-Virus she has running is AVG. It has also happened with friends who have brought there laptops over.

View 8 Replies View Related

Home Network :: Bandwidth In Adhoc Connection Between 3 Laptops

Jul 20, 2011

I have three laptops (running ubuntu with different kernel versions) with wireless adapter Intel Corporation PRO/Wireless 3945 ABG. Laptop A ----- Laptop B ----- Laptop CI created an adhoc connection in laptop A with: Essid: 'ad_hoc', IP address: 10.42.43.1, Subnet: 255.255.255.0, Gateway: 0.0.0.0, Now the laptops B and C can see the wireless connection 'ad_hoc' and I can connect to them after setting IP 10.42.43.1 and 10.42.43.2 respectively. So, I created the adhoc connection between 3 laptops. Now, I wanted to check the bandwidth between the different paths. The tool iperf was what I used for TCP bandwidth calculation. The bandwidth between A and B was around 4.5 Mbps , between A and C was around 4.0 Mbps but the bandwidth between B and C (B being server) was 677 kbps whereas C being server was 3.99. I don't understand how can the bandwidth drop so high when B was made the server. The system adapters are identical.

View 1 Replies View Related

Laptops Disconnects Internet Connection On Belkin Router

Dec 30, 2011

I have a belkin wireless router/modem running our home network. We connect using 3 android devices, a wii and wireless printer with no problems. However, when connecting using either a windows 7 or windows XP laptop the internet connection is lost after a couple of minutes. I can't work out the cause of the problem but resetting the router gives a couple of minutes of browsing before it goes again. I have tried using static IP addresses for the laptops but this hasn't worked, furthermore I have tried a winsch reset.

View 2 Replies View Related

Internet Connection Sharing Through Laptops PCMIA Modem?

Feb 8, 2011

Is there a way for me to connect my desktop PC to my laptop, & use the laptops EDGE/GPRS modem in the PCMIA slot of the laptop to access the Internet? I also have a wireless router that is not being used for anything, however, I use the laptop to get online, & I'd like to share that connection with my desktop at home.

View 1 Replies View Related

Losing Internet Connection On Desktop After Power Failures But Not On Laptops?

Jan 29, 2011

I leave on one of my computers on all the time, an Acer desktop with Windows XP. I also have two laptops. I have Verizon DSL and a linksy wireless G router. When we have a power outage the Acer desk top loses it's internet connection. Trying to reconnect the connection takes hours. Even when we finally get it back we have no idea how we did it. The laptops which of course were off have no problem.

View 2 Replies View Related

Connection Between Two PC's Stopped Suddenly

Aug 11, 2012

I have connected two PC's(xp & win 7) using cross over cable.I configured all the things. I was able to share my folders from one pc to another. Also i was sharing internet connection.But one day it suddenly stopped working. I changed IP address and tried all that i could do. Nothing worked.Now when I ping a PC from another it replies only once out of four and if I try to ping one more time , reply never comes.When i reboot both PC's and scan using angry IP, it shows other pc only once.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved