Linksys Wireless Router :: WRT54G Signal Vanishes Completely / Keeps Dropping Connection?

Dec 26, 2012

My old WRT54G V8 router has been acting up lately. It keep dropping the connection out of the blue. Sometimes I'd be browsing the Internet when the router's signal vanishes completely, it disappears from the list of available wireless networks on not just my computer, but my smartphone and all other devices in the household! Other times I keep connected to the network but there's no access to the Internet. Everything seems fine on the ISP's part, I can connect just fine directly from my modem, so I'm certain the problem is with the router. Besides, these problems are solved by just power cycling the router.

View 4 Replies


ADVERTISEMENT

Linksys Wireless Router :: WRT54G Keeps Dropping Internet Connection?

Aug 1, 2012

Wired connection to the router works fine. But it drops all the wireless devices (PC, phone, tablet) multiple times each day, sometimes only 30-60 minutes after reconnecting. Power cycling the router "fixes" the router and allows reconnection. There are 2 topics in the FAQ section that looked good: Getting poor or no signal from a wireless routerTop causes of dropping wireless connection on a Linksys routerbut clicking on those does not bring up anything.

View 9 Replies View Related

Linksys Wireless Router :: WRT54G Keeps Dropping Internet Connection

Dec 22, 2006

I have a WRT54G conected to a desktop through a wire, and conected to a laptop wirelessly. It starts working fine, and after a while i get no internet connection in my laptop nor my desktop. After this happens i disconect the power source from the router, i conect it back again and it starts working.

View 9 Replies View Related

Linksys WRT54G V5 Router / Transfers Start Fast Then Almost Halt Completely?

Mar 14, 2011

Linksys WRT54G v5 Router
Arris TM502G/CT Modem

Whether it be downloading or just trying to watch a video on youtube. For some reason everytime I try to download something it appears to start fast but then it basically just stops. I'm running windows Vista and I've tried going into the router security settings and unchecking Block Anonymous Internet Requests.

View 1 Replies View Related

Linksys WRT54G Keeps Dropping The Connection?

Dec 26, 2012

My old WRT54G V8 router has been acting up lately. It keep dropping the connection out of the blue. Sometimes I'd be browsing the Internet when the router's signal vanishes completely, it disappears from the list of available wireless networks on not just my computer, but my smartphone and all other devices in the household! Other times I keep connected to the network but there's no access to the Internet. Everything seems fine on the ISP's part, I can connect just fine directly from my modem, so I'm certain the problem is with the router. Besides, these problems are solved by just power cycling the router.

Who is your Internet Service Provider (ISP)?

Amnet Costa Rica

What type of Broadband connection are you using?

Cable

What is the exact Make and Model of your Modem, Router or Modem/Router Combo Linksys WRT54G V8 What is the Name of the Anti-Virus, Security or Firewall Software Windows Security Essentials and Windows Firewall on all computers.Below is my ipconfig and Wi-Fi diagnostics from Xirrus Inspector attached.

Code:
Windows IP Configuration

Host Name . . . . . . . . . . . . : VAIO
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

[code]....

View 7 Replies View Related

Linksys Wireless Router :: WRT300N Dropped Connection Completely

Jul 4, 2011

I've had this WRT300N for several years and it has worked very well.It suddenly dropped all wireless connections and no one can re-connect.  My main pc is hard wired directly to the router and works perfectly as always.  3 wireless pc's and 3 handheld devices suddenly can't connect. I've powered down my modem and router for several minutes, but nothing changed.  The firmware was upgraded a long time ago and there are no other upgrades available.

View 7 Replies View Related

Linksys Wireless Router :: E2500 - Signal Dropping

Mar 28, 2012

I just bought and set up an E2500 wireless router this evening. Using the default settings (as applied by the Cisco setup CD), I was experiencing pitiful range, with signal dropping to 2 out of 4 bars just one room (about 20 feet away). (Previously, using the exact same physical setup with the same computer and a single-band Belkin n150 router, I always had 4 out of 4 bars in that room).
 
I entered an online live tech chat, and after some back and forth, the tech rep had me change the settings as follows:
(1) Rename the SSID to separate the two bands: One network SSID for the 5GHz band, another for the 2.4GHz.
(2) Turn off auto-channel for both networks: Set 5GHz to stay on channel 36. Set 2.4GHz to stay on channel 1.
(3) The 5GHz is set to use 20/40 MHz width, while the 2.4GHz is set to use only 20MHz width, but I believe those were the defaults already in place.
 
Then he promptly ended the chat, so we didn't get to finish. Nonetheless, with these settings in place, I am now getting a steady, uninterrupted 4 bars in the next room, using the 5GHz network SSID. Because we were disconnected, I have a few questions remaining:
 
(1) Is it normal to get such terrible range using the default settings (that's make for a lot of unhappy customers and a lot of extra calls to tech support)? Or does this indicate a problem with my router? (This was a Cisco certified refurbished model) 
(2) Which change 'fixed' the problem: Was it separating the two bands into different SSIDs, or locking the channels rather than using Auto channel? 
(3) Was this just intended as a test to troubleshoot the problem, or am I supposed to leave the router configured this way? (Since we were disconnected, I didn't get to follow up with the tech rep after changing the settings.) With it configured this way, I'm connecting devices that can find the 5GHz network to the 5GHz network's SSID, and the other devices that can't find it, I'm connecting to the separate SSID for the 2.4GHz network. Seems unnecessarily messy to have 2 SSIDs.

View 4 Replies View Related

Linksys Wireless Router :: E2500 Constantly Dropping Signal

Jun 20, 2012

My E2500 Linksys has never been consistant with its signal to my MacBook Pro.

View 8 Replies View Related

Linksys Wireless Router :: WRT160N V2 Signal Dropping For Few Seconds

Nov 24, 2011

I have Linksys WRT160N v2 wifi router that I have been using for over a year now, till two months back I was very happy with the router, speed was good without any signal issues though in last couple of weeks I have noticed that the router has started to create problems like the browsing will stop it self for a few seconds without any reason (specially I notice this when I am on youtube playing a video that will stop after 2 or 3 minutes).

View 7 Replies View Related

Linksys Wireless Router :: WRT54G Keeps Dropping Internet

Aug 5, 2011

I have a WRT54G wireless router and it goes through periods where it constantly has to be reset cause it keeps dropping the internet connection. Once you do a power cycle it starts working right again. But sometimes goes out 5mins later.I have the router hooked up to a Windows XP computer via an ethernet cable...and I have 1 Windows Vista laptop, 2 Android phones and a PS3 connected via wireless.The PS3 is set up following these directions: (not sure if this is what's screwing it up)
 
"Step 1:Open a web browsersuch as Internet Explorer.

Step 2:Go to the Address bar and enter your router's IP address ("192.168.1.1" is the default IP of most Linksys routers) then press [Enter].

Step 3:When the router's web-based setup page appears, click Applications& Gaming then click DMZ.

Step 4:Select Enable on DMZ and under DMZ Host IP Address enter the PlayStation®3's IP address.

- Try 192.168.1.10 or 192.168.1.20 Save Settings.
- This IP address will need to typed in manually during online setup on ps3. I think its the first address you enter (I think this is the game's IP address).
- Use 192.168.1.1 for the wireless router's IP address on your PS3.

Step 5:Now, click Administration and Disable UPnP. Make sure you also disable UPnP on your ps3 online setup. Save Settings.

Step 6:Click Status. Write down the DNS 1: dns number and DNS 2: dns number on a piece of paper. You will enter these for DNS 1 and DNS 2 numbers during online ps3 setup. NOTE: The IP address listed on the Status page for your wireless router is not used for any setup on your ps3. Remember, to get into ps3 online setup, you have to choose Manual during setup so you can enter these numbers.

Step 7:The WP key crap and whatever during online setup should be skipped unless you specifically setup some kind of password for your wireless router when you installed it. I didn't and just left that part blank and skipped over it.That should get your wireless router and game setup. If you're still stuck, drop me a message.And, remember to do this setup after that:Linksys has a great tech support at their site. url...

I have a ps3 and did all of the wireless and ps3 online setup for it using their site technical support. Doing that seemed to throw a monkey wrench into my internet connection a while after that. I just left all of my game settings in place and did this: Logon on to your wireless router. To do this, you will probably go to url.. by typing this address into your address box on your internet explorer. Logon. If you don't know how to logon, go to and follow the instructions in technical support.

View 1 Replies View Related

Linksys Wrt54g Router - Inconsistent Wireless Signal?

Jun 6, 2012

I have a linksys wrt54g wireless router and a few weeks ago my wireless connection started to become inconsistent, it would randomly drop service or be very slow, and now it has become very inconsistent and slow, all the while the wireless signal would be 4-5 bars.On my windows 7 desktop, often times the yellow triangle with the exclamation mark pops up over the signal strength indicator when its at 4-5 bars.I've tried changing to 2 different routers and its the same, and the problem is persistent for all computers in the house.I've connected directly via ethernet to the modem and router and service was fine.There are a few wireless networks in the area,some with quite strong signals, but I downloaded the xirrus wifi inspector and it says I'm not sharing a channel (channel 1) and though I'm ~15ft from the router, the signal is ~65dbm, which seems low and is almost equivalent to neighbor's wireless strength.

View 2 Replies View Related

Linksys Wireless Router :: Low Signal Strength With Wrt54g?

Oct 16, 2011

My wireless router has been spotty since my cable company installed a new modem for cable internet.  I have powercycled several times, downloaded new firmware, rebooted and am still having problems.  Lately when I do finally get on the internet with a wireless device, the signal strength is very low.  It is low on my iphone, on my Mac laptop and also on my Samsung Bluray player.  Lately a window keeps popping up when I am trying to watch netflix that states my band width is too low, even though it has been working fine for 2 months.  Is my router outdated?

View 5 Replies View Related

Linksys Wireless Router :: WRT400n Has Started Dropping Signal 4 To 5 Times A Day

Jan 27, 2012

My WRT400n has started dropping the wireless signal 4 to 5 times a day. Somet times it fixes itself but most of the time I have to re-boot the router to connect a wireless signal.I looked for a firmware upgrade but there hasn't been one since 2009.

View 4 Replies View Related

Linksys Wireless Router :: WRT54G - Signal Won't Reach Laptop From Far Away

Mar 25, 2013

it might be good to point out first that this was never a problem before i began fixing a completely irrelevant problem (screen broke) with my laptop, which took around three weeks. i could at that time use the internet a couple of rooms away from the router just fine, but now it's a no-go. .
 
the model is WRT54G, and the serial number is CDFD1F9CJ507.

View 1 Replies View Related

Linksys Wireless Router :: WRT54GS - Reset Security Button Completely Shut Out Connection

Oct 3, 2011

I was in the Wireless tab>Basic Wireless Settings and then I clicked the "Reset Security" button.  I don't know what that did but I've been completely shut out of my connection ever since and I don't know how to fix it. I tried doing the install sequence of the router just now (Clone MAC address, then release and renew DHCP, power cycle modem, router, and PC) but it still didn't work.

View 1 Replies View Related

Linksys Wireless Router :: Configure WRT54G As Repeater Signal Of WRT120N?

Jan 2, 2013

Is it possible to configure the WRT54G as a repeater signal of the WRT120N?

View 1 Replies View Related

Linksys Wireless Router :: WRT54G - See Signal But Can't Connect With Computer Or Iphones?

Oct 17, 2011

I am having problems connecting to my wireless internet.  We were getting a poor signal so we moved our router to our living room where we always are, but now we can't connect.  We tried resetting everything, turned on and off several times.  Went to the linksys wireless set up page, changed SSID and password.  Still can't connect with the computer or our iphones.  It shows our SSID is there but won't connect.  My internet when plug directly to the computer works fine (I am using it now).  My computer can connect to the router Linksys WRT54G, we just can't get it to connect to the wireless.

View 1 Replies View Related

Linksys Wireless Router :: Ea4500 Wifi Signal Weaker Than Old Wrt54g

Aug 27, 2012

I recently bought the top end ea4500 hoping its "high end" claims would get a better wifi signal in my bedroom(on my iphone 4s) than what i was getting with my WRT54G.The end result is it constantly drops signal completely or shows my network but when I try to connect says "cannot connect to wireless network" even though it's staring me right in the face.  When I hook my WRT54G up, I get a signal.. all be it weak, but at least it doesn't drop out on me.Did I just waste almost $200 on a high end router that can't push a signal out stronger than my almost 7 year old WRT54G? or am i missing some setting that will make this EA4500 worth its claims? settings info:everything is pretty much on "default" aside from the SSIDs for the different bands and the corresponding WPA passwords.
 
also another problem, it seems like the router itself craps out every 60-120 minutes, no leds lit up on the router and my modem (Cisco DCP3010) shows no "link". Yet when hooked directly to the PC there is a "link", so pretty sure its the router and not the modem.

View 9 Replies View Related

Linksys Wireless Router :: WRT54G Signal Frequently Disconnects Then Recovers Automatically

Jul 31, 2012

I have a LinkSys WRT54G Wireless-G Broadband Router located in my basement office. My IBM T42 ThinkPad running Windows XP Pro has an Intel(R) PRO Wireless 2200BG Network Connection adaptor. The signal strength on the main floor of our townhouse is ~ 80%. My problem is the signal frequently disconnects then recovers automatically causing frustration when browsing the internet. My question: Should I upgrade to a new Wireless N router OR purchase a WiFi Range Extender? since my laptop has a Wireless-G adaptor would a Wireless-N router provide a stronger signal?

View 4 Replies View Related

Linksys Wireless Router :: WRT54G Signal Strength Bounce After Firmware Upgrade

Dec 10, 2012

Have two WRT54G Wireless Routers.
 
-One WRT54G ver. 6, Firmware Version v1.028
-One WRT54G ver. 6, Firmware Version v2.x 
 
With the WRT54G ver. 6, Firmware Version v1.028.When I ran the android app WiFi Analyzer, I get mixed results.On my Samsung Galaxy S3, I saw my signal on Channel 2, and others around me (two on Channel 6 and two on Channel 11).On my ASUS Transformer Prime TFT201 I see the same signals, but my router signal bounces continously between the baseline (-100dBm?) and about -35dBm.
 
Plugged in the WRT54G ver. 2, Firmware Version v2.x  Channel 8.Hooked it up and got good steady signal strength. It Had 'WPA - Shared Key' but did not have the 'WPA - Personal' that was on the ver. 6. So, I had to go and screw things up. I've upgraded this to Firmware Version: v4.21.5 and guess what? I now have 'WPA - Personal'. I also have a signal is bouncing on BOTH units.
 
On my ASUS, I can see both routers. The ver. 2 AND the ver. 6 are bouncing between baseline and -35dBm, in unison. Apprently something in the ASUS does not like the later Firmwares.On my Samsung I can see the two signals - the ver. 2 on Channel 8 is stable as a rock and the ver. 6 on Channel 2 is also bouncing, but at a much slower rate! Running Speedtest.net a PC hardwired to the ver. 2 - I get 5.34 Mb/s Download and 0.47 Mb/s upload (yeah, my Internet sucks!) Running Speedtest.net through the ASUS/WiFi to the ver. 2 -  I get 2.43 Mb/s Down and 0.65 Mb/s Up.Running Speedtest.net through the Samsung/WiFi to the ver. 2 - I get 5.07 Mb/s Down and 1.07 Mb/s Up.

View 6 Replies View Related

Linksys Wireless Router :: Setup Wrt54g As Access Point To Extend Signal?

Aug 17, 2011

how do i setup a wrt54g router as a wireless access point to extend wifi signal from e3200 which is broadcasting the internet?
 
everyone keeps saying to remove the stock firmware and instal the dd-wrt firmare to do this. can i do this with the stock firmware?

View 1 Replies View Related

Linksys Wireless Router :: Use WRT54G Router With The Newer WRT310N To Extend Signal?

Aug 27, 2008

Can you use your WRT54G router with the newer WRT310N router to extend your wireless signal? How?

View 7 Replies View Related

Completely Blocking Wireless Signal?

Mar 17, 2012

I am getting wireless signal in every room except one of the bedrooms.I have upgraded to a better router Buffalo N450 AND added a wireless USB on to laptop.Here is the weird thing.I have 100% signal strength all the way to the bedroom door. One step inside signal drops to 20%, further inside it can get to Zero BUT if I just take ONE step into the bathroom which is in the bedroom.. signal goes back up to 100%... one step either way goes from 100 to Zero... What the heck?I live in an Apartment building.. What could possibly be upstairs or in the roof thats only blocking signals in this one room!

View 1 Replies View Related

Linksys WRT54G2 / 4th Router But Still Dropping Signal To Laptop?

Feb 14, 2011

i am on my 4th router but still dropping signal to laptop. if I unplug the router and plug back in it works. but not for long. am getting very upset.

View 3 Replies View Related

Use A Linksys WRT54G Router To Get A Signal For Desktop?

Aug 6, 2012

Can I use a Linksys WRT54G router to get a signal for my desktop? I am using a modem that has wifi downstairs and want to get a signal for a desktop I have in the kids room upstairs

View 4 Replies View Related

Linksys Wrt54g - Supply 3 Pc's With One Wifi Signal From Usb Wireless Adapter?

May 15, 2011

My cable went out and my neighbor and I have decided to split her at$t broadband, the phone/modem/router is a 2wire.

I have 3 windows 7 computers but only one wireless g usb wireless adapter from tenda. I also have a linksys wrt54g wireless router that I can use.

I have tried to set up the router as a wireless bridge by loading a DD-WRT bin on my linksys but it seemed way buggy -results - I was only able to get 2 of 3 online and if I restarted any of them I lost the connection completely.

Went back to stock firmware and tried to set up a lan between the 3 towers with the linksys then just bridge the two connections on the main pc - results -no internet at all on 2nd and 3rd pc... and when the connection to the wifi network is started I loose my networking to the 2 pc's on the linksys.

Im not sure if im not setting these up correctly as im just following guides and such but since im fairly good with computers this is making me crazy...to be able to set three computers up on 1 good clear wifi should be an easy task but it's just not working out..

View 1 Replies View Related

Linksys Wireless Adapters :: WRT54G - Network Signal Very Low Throughout The House?

Feb 4, 2011

I have a Linksys wireless-g broadbrand router ( WRT54G ) in my bedroom along with my cable modem and everything runs fine in my room. But I also have a pretty old computer in another bedroom about maybe 15 or 20 feet away from the current setup. On that computer I have a wireless g adapter that's connect through a usb port and has very low signal strength. I sometimes use that computer and I'm always getting kicked off I'm guessing because the signal cuts out. So, today I plugged in the adapter in my room with my setup and had amazing signal. What can I do to give that other computer a good boost? I know I should update that computer but I'm guessing I also need to somehow boost the signal somehow.

View 6 Replies View Related

WNR1000V3 Router - Wireless Signal Dropping?

Jan 12, 2012

I have a Dell Studio 1745 Laptop and its only a few years old, I recently upgraded my router to be wireless a year or so ago and have had a few d/c issues here and there but mostly has not been a problem.Recently I have had tons of d/c issues while playing warcraft or browsing the internet in general, anything really.So I made the mistake of recently updating my WNR1000V3 router's firmware from my laptop's wireless connection. After I did this I saw all sorts of warnings (none built into the firmware itself, sigh) that this was a big no no.

Since then my d/c issues have been horrible but what it does now is my connection will be completely normal then all of a sudden my wireless access point will switch to 'No Internet Access' and it will drop my internet.The only way I can get it back is to go into the other room and reset the router by either unplugging it, or pressing the reset button on the back, once it reboots and everything, my laptop sees the connection again, and it has Internet Access fine.Soo I went and made the problem much worse, the lame part of the situation is before I had this firmware issue I was getting this problem anyways.

I decided if I could flash a older version of firmware to the router using my desktop that is wired to the router I could then reupdate it to the current version,I found a old firmware version on netgear.com and went to upload it through the router login for my router, it then said the file format was unrecognizable or not the right one (it was a .img file). I even tried to mount the file and explore it, no go. I found another firmware version older than that and attempted to flash that to the router and it began to update, then gave me a warning that this firmware was older than my current, I click yes and my internet drops and the update never happens.

So if I did screw the modem up this way I have no idea how to fix it now I have reset it to factory settings but this doesn't affect the firmware version. I suspect the firmware has something to do with the recent problems because I have seen the 'Congratulations, You have setup your router and are connected to the internet" like 20 times these past 48 hrs.I downloaded Xirrus wifi inspector and have it running now.I tried the ip flush and release stuff, and a bunch of tricks ive seen on other forums.My system is Windows 7 with a Intel wi-fi link 5100 AGN network adapter. I have tried rolling back that network driver and messing with the advanced and tcp/ip settings.

View 14 Replies View Related

Cisco Wireless :: Sporadic Signal Lost With Linksys WRT54G Routers

Jul 11, 2011

I have a office that was converted from a older townhouse.  The building has 3 floors with the distant of each floor expands no more than about 60 - 75 feet from end to end of the building.  Not sure what's in the walls as the building is at least 20-25 years old.  Total number of users is about 20 - 25. 
 
Here is the problem..
 
I have a WRT54G wireless router setup to provide wireless coverage for this office, located on the 2nd floor,  For some reason, about 10 - 15 feet from the opposite end of the building, the signal drops off big time. Regardless of the floor.  So to assist with the signal, I installed a wireless 300N Gain extender on the same floor on the opposite end of the building where the signal was weak.  At first, it seemed to work by boosting the signal, but then it seems to show the same issue as before.. sporatic signal loss, signal fluctuation, etc.
 
My question is should I replace the wireless booster with multiple wireless APs located throughout each floor... maybe 1 per floor?  If so, is there a trick to configuring all 3 APs to have the same SSID and same encryptionsso it will be seamless to the users?  Since the first AP works fine, I wanted to get 2 additional WRT54G units.

View 2 Replies View Related

Linksys Wireless Router :: E1550 Dropping Connection?

Feb 16, 2012

I replaced a WRT54G2 V1 with a E1550 earlier this week. This router connects a sub-net of our office to the main network of our office. When the WRT54 was in place everything worked without a hitch, but the E1550 keeps dropping us from a server we have on the main network. The WRT54 is back in play until I can figure this out.

View 1 Replies View Related

Linksys Wireless Router :: New E2500 Dropping Connection?

Dec 8, 2011

I purchased an E2500 router today and it worked perfectly for about 4 hours.  Now it drops my internet connection constantly. I can connect and load maybe 2 pages before that little yellow triangle of doom appears.  Then after 2 or 3 minutes I am good and can reconnect. This cycle just keeps happening. 

View 1 Replies View Related

Linksys Wireless Router :: Wrt54g V6 - Way To Get Connection?

Jan 12, 2012

I'm trying to set up my sons  I pod touch to my router i have the wrt54g v6 and it won't connect?

View 7 Replies View Related

Linksys Wireless Router :: Two WRT54G And One DSL Connection?

Feb 19, 2013

Situation:  I have one Internet connection and I have need of two networks.  One filtered with OpenDNS and the other unfiltered.  I have a Speedstream DSL router provided by ISP for connecting to Internet.  I have two WRT54G's and would like to utilize them to form two networks.  The Speedstream is a router with a gateway address of 192.168.1.254.
 
From that Speedstream (only one network plug) I would like to go to a 5port switch.  From that switch, I would like to configure the two WRT's to be two different networks (one using OpenDNS settings for filtering) with one having a 192.168.1.x address scheme and the other (no Internet filtering) having a 192.168.10.x scheme.  Both would have DHCP enabled for their networks and the Speedstream would have DHCP disabled.  There is not a need (at this point) to have the networks communicate.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved