My WRT400n has started dropping the wireless signal 4 to 5 times a day. Somet times it fixes itself but most of the time I have to re-boot the router to connect a wireless signal.I looked for a firmware upgrade but there hasn't been one since 2009.
View 4 Replies
The wireless drops specifically from my laptop constantly at random times. When the wireless drops in order for me to be able to reconnect i have to restart the router itself. There are also random times where the Wi-Fi stops broadcasting altogether. I have a computer connected via Ethernet and it does not lose connection during these times. All the computers are running Windows 7 and the Router is up to date on firmware.
View 5 Replies View RelatedMy wrt400n was working great but since last few days internet keeps dropping. My modem is all good and up and running. Its just router keeps dropping internet. SO i have reset the router and than it works.
View 6 Replies View RelatedUpgraded to 1.0.04 from .03 and caused some problems. Worked great at first-upgrade was flawless-no problems there. THen it started dropping wireless connections. THen no wireless or wired connections. COuld not pull an IP address.Pulled power to router couple times and it worked great at first again then degraded like before.Held reset button for 5 secs to reset to factory defaults, now the setup display is missing all the html coding-no menu list. All in raw format.Am connected to port 1 via cat 5 to my laptop with no connections except the internet connection to the cable modem. Something has gone really wrong with my .04 software.Tried to find the .03 version, but the zip file is HUGE. Whats in it anyway?
View 1 Replies View RelatedSo I bought this new E4200v1 about a week ago and since yesterday it started dropping connection terribly. After checking Cisco Connect it seemed to have a Firmware update which I did and after it was done I decided to do a factory reset since I read somewhere that it works. When the router came back on for a second I saw an unsecured SSID, but then it turned into an SSID called panelist-ssid with a password called google-4panel which is definitely not the default. Also, when I try to access the router webpage to configure it, the password is not the old one nor the default Username: blank Password: admin credentials. I am currently connected to it via the button on the back that allows me to connect without password. Another thing is that I uninstalled Cisco Connect and when I try to install at 25% it says it cannot find my router and ask for SSID + password which I input yet it fails.
View 9 Replies View RelatedI have an EA3500 that I installed recently to replace an old NetGear Router, everything works fine like a charm and suddenly is like the router goes down, both wired and wireless connections go down, no connection at all to the router, no internet, no nothing, the power stays on, but you can see the Leeds on the back blinking like when you do a reboot, then after a couple minutes everything comes back again, till the next drop...it happens several times a day, sometimes 3 to five times in an hour, some other times just happen 2 or 3 times a day... I have tried everything possible, changing the settings, factory defaults, firmware upgrade and roll back, MTU, different channels, even different power outlets to no avail.I wonder is I have a lemon, the worse part is I can't return to the store since the UPC code is gone (rebate) and links says they can't take it back as RMA.
View 3 Replies View Relatedmy E4200 is dropping connections several times a day. I'd be working on my laptop, go to a webpage and bang, no connection. A minute or so later it would reconnect. It even appears to be doing this with a computer that is hardwired to one of the ports. So it doesn't seem limited to just wireless. Happens to both N and g channels as well.
View 9 Replies View RelatedFor some reason my ps3 wont connect,the signal strength is 100% but it just times out.it will randomly connect BUT cant stream anything or connect online.Or it will get disconnected if someone turns on my mine computer in the other room/Should i DMZ the ps3?Routers a WRT610N dual N Firmware Version: 2.00.00 B05 cant upgrade to 3.00 because of "upgrade failed" error.
View 9 Replies View RelatedHad an E4200 for a couple of months now and have not been able to resolve an issue with the router dropping an Apple iPad 2 at random times.The E4200 is replacing a Cisco Aironet 1200, which never dropped any clients, iPad 2 or others, and never displayed any of the issues below.
TECH DETAILS:The E4200 is being used purely as an access point. All extras are not in use and are disabled.
Firmware 1.0.03
Hardware version 1.
BASIC ISSUE:The E4200 drops an Apple iPad 2 off the 2.4 Ghz Mixed (B, G, N) network. The user must then select the network to rejoin. Rejoining occurs without incident. The same issue occurs when the network is restricted to B, G. The drops occur at what appears to be random intervals - sometimes 10 minutes apart, sometimes hours apart. We can have as many as 6 drops in an hour. A ping to the apple ipad shows the device stops responding to pings about 10 seconds before the user is prompted to rejoin a network. Meanwhile, a ping to the E4200 itself from a laptop connected via the E4200 on the same radio as the ipad continues to work without fail during this incident.
1. The iPad 2's cannot connect to the 5Ghz radio. I believe iPad 2's are supposed to support 5Ghz.
2. Both our Apple TVs do not connect to the 5Ghz radio: they fail with a "There was an error connecting to the network. Check your settings and try again. (-3914)" error. Apple TV supports 5Ghz.
3. The admin interface for the E4200 is very slow sometimes. Probably over 20 seconds to render some pages when it gets really bad. As a comparison, Internet-based pages on fast sites that delivered via the E4200 itself load in less than 2 seconds.
4. The HTTPS version of the admin interface can only be connected to via Safari browers. Both Internet Explorer 9 and Chrome 16 fail to connect with a "Connection reset" error. In Chome, it says "Error 101 (net::ERR_CONNECTION_RESET): The connection was reset." This is across multiple devices. There is no issue with straight HTTP.
All other devices - including Macs and PCs - connect fine with the E4200 on both 5Ghz and 2.4 Ghz radios, even if they cannot access its admin interface via HTTPS.I've presented quite a few issues above, but the main one is the drop outs for the iPad 2 devices. I'd present logs on drops, but the thing doesn't record any useful logs.
Basic wireless config:
5Ghz:
Network Mode: Wireless-N Only
Channel width: Auto (20 or 40 Mhz)
Channel: Auto (DFS)
SSID Broadcast: Enabled
[URL]
I just bought and set up an E2500 wireless router this evening. Using the default settings (as applied by the Cisco setup CD), I was experiencing pitiful range, with signal dropping to 2 out of 4 bars just one room (about 20 feet away). (Previously, using the exact same physical setup with the same computer and a single-band Belkin n150 router, I always had 4 out of 4 bars in that room).
I entered an online live tech chat, and after some back and forth, the tech rep had me change the settings as follows:
(1) Rename the SSID to separate the two bands: One network SSID for the 5GHz band, another for the 2.4GHz.
(2) Turn off auto-channel for both networks: Set 5GHz to stay on channel 36. Set 2.4GHz to stay on channel 1.
(3) The 5GHz is set to use 20/40 MHz width, while the 2.4GHz is set to use only 20MHz width, but I believe those were the defaults already in place.
Then he promptly ended the chat, so we didn't get to finish. Nonetheless, with these settings in place, I am now getting a steady, uninterrupted 4 bars in the next room, using the 5GHz network SSID. Because we were disconnected, I have a few questions remaining:
(1) Is it normal to get such terrible range using the default settings (that's make for a lot of unhappy customers and a lot of extra calls to tech support)? Or does this indicate a problem with my router? (This was a Cisco certified refurbished model)
(2) Which change 'fixed' the problem: Was it separating the two bands into different SSIDs, or locking the channels rather than using Auto channel?
(3) Was this just intended as a test to troubleshoot the problem, or am I supposed to leave the router configured this way? (Since we were disconnected, I didn't get to follow up with the tech rep after changing the settings.) With it configured this way, I'm connecting devices that can find the 5GHz network to the 5GHz network's SSID, and the other devices that can't find it, I'm connecting to the separate SSID for the 2.4GHz network. Seems unnecessarily messy to have 2 SSIDs.
My E2500 Linksys has never been consistant with its signal to my MacBook Pro.
View 8 Replies View RelatedI have Linksys WRT160N v2 wifi router that I have been using for over a year now, till two months back I was very happy with the router, speed was good without any signal issues though in last couple of weeks I have noticed that the router has started to create problems like the browsing will stop it self for a few seconds without any reason (specially I notice this when I am on youtube playing a video that will stop after 2 or 3 minutes).
View 7 Replies View RelatedRecently, i bought a LinkSys WAG120N ANNEX-A to replace my old speedstrem4200. Well everything was fine, but after 2 days of it installed, it started to drop my ADSL connection.
Sometimes, it remain connected for 4-5 hours, then drop, or sometimes, it drop every 30min-1hour.I tried upgrading the firmware to 1.00.16, but no luck, it still drop the connection.I have 3 computer plugged to the router via cable(wired) plus 1 netbook(wireless) and 1 ipod (wireless).Sometimes, when 1 computer is turned off, it seem to make the ADSL connection drop when the LAN light turn off. I noticed everytime it drop the ADSL connection, in the logs, i get this:
Mon, 2010-11-08 22:24:57 - Terminating on signal 15. Mon, 2010-11-08 22:24:57 - Enter: tdb_store. Mon, 2010-11-08 22:24:57 - tdb_store: calling tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_store. Mon, 2010-11-08 22:24:57 - tdb_store: calling tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_store. Mon, 2010-11-08 22:24:57 - tdb_store: calling tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_update. Mon, 2010-11-08 22:24:57 - Couldn't increase MTU to 1500. Mon, 2010-11-08 22:24:57 - Couldn't increase MRU to 1500 Mon, 2010-11-08 22:24:57 - LCP down. Mon, 2010-11-08 22:24:58 - Modem hangup Mon, 2010-11-08 22:24:58 - Connection terminated. Mon, 2010-11-08 22:24:58 - Connect time 215.0 minutes. Mon, 2010-11-08 22:24:58 - Sent 50496235 bytes, received 212267122 bytes. Mon, 2010-11-08 22:24:58 - Enter: tdb_store. Mon, 2010-11-08 22:24:58 - tdb_store: calling tdb_update. Mon, 2010-11-08 22:24:58 - Enter: tdb_update. Mon, 2010-11-08 22:24:58 - Doing disconnect Mon, 2010-11-08 22:24:58 - Exit.
I tried changing the MTU settings in the router to 1492 (my ISP default) but didnt work.
Tried changing the MTU to 1492 on every computer and still got the same problem.For now im using the WAG120N in bridge mode, and still using my old speedstream4200 as ADSL modem.
My old WRT54G V8 router has been acting up lately. It keep dropping the connection out of the blue. Sometimes I'd be browsing the Internet when the router's signal vanishes completely, it disappears from the list of available wireless networks on not just my computer, but my smartphone and all other devices in the household! Other times I keep connected to the network but there's no access to the Internet. Everything seems fine on the ISP's part, I can connect just fine directly from my modem, so I'm certain the problem is with the router. Besides, these problems are solved by just power cycling the router.
View 4 Replies View Relatedi am on my 4th router but still dropping signal to laptop. if I unplug the router and plug back in it works. but not for long. am getting very upset.
View 3 Replies View RelatedI have an airlink ar525w wireless router. My wireless connection drops out every few hours and I have to reset my router to get it up again. My wired connections work perfectly. Also, I am able to see my network as available and with full signal strength from windows but connecting to it doesn't do anything (just says connecting forever). This is not isolated to one computer. I have tried it with laptops, desktops and smartphones. The strange thing is that it works perfectly (hasn't dropped a connection for one month) if I have wireless security disabled.I have tried different types of security (WEP, WPA, WPA2), different channels (all 11 channels), assigning static IP addresses to all my devices and turning off the DHCP server on my router. But none of these settings fix the problem. would be willing to buy another router, but I was reading through reviews on newegg and every router that I saw reviews for has a few people experiencing the same problem that I described here. Is this a widespread problem that I have to live with or does this have something to do with my router specifically?
View 3 Replies View RelatedI have a Dell Studio 1745 Laptop and its only a few years old, I recently upgraded my router to be wireless a year or so ago and have had a few d/c issues here and there but mostly has not been a problem.Recently I have had tons of d/c issues while playing warcraft or browsing the internet in general, anything really.So I made the mistake of recently updating my WNR1000V3 router's firmware from my laptop's wireless connection. After I did this I saw all sorts of warnings (none built into the firmware itself, sigh) that this was a big no no.
Since then my d/c issues have been horrible but what it does now is my connection will be completely normal then all of a sudden my wireless access point will switch to 'No Internet Access' and it will drop my internet.The only way I can get it back is to go into the other room and reset the router by either unplugging it, or pressing the reset button on the back, once it reboots and everything, my laptop sees the connection again, and it has Internet Access fine.Soo I went and made the problem much worse, the lame part of the situation is before I had this firmware issue I was getting this problem anyways.
I decided if I could flash a older version of firmware to the router using my desktop that is wired to the router I could then reupdate it to the current version,I found a old firmware version on netgear.com and went to upload it through the router login for my router, it then said the file format was unrecognizable or not the right one (it was a .img file). I even tried to mount the file and explore it, no go. I found another firmware version older than that and attempted to flash that to the router and it began to update, then gave me a warning that this firmware was older than my current, I click yes and my internet drops and the update never happens.
So if I did screw the modem up this way I have no idea how to fix it now I have reset it to factory settings but this doesn't affect the firmware version. I suspect the firmware has something to do with the recent problems because I have seen the 'Congratulations, You have setup your router and are connected to the internet" like 20 times these past 48 hrs.I downloaded Xirrus wifi inspector and have it running now.I tried the ip flush and release stuff, and a bunch of tricks ive seen on other forums.My system is Windows 7 with a Intel wi-fi link 5100 AGN network adapter. I have tried rolling back that network driver and messing with the advanced and tcp/ip settings.
I am trying to troubleshoot my own router (Linksys) issues with using Lync and accessing some sharepoint sites that are internal to my company's network. I am connecting to the Internet using a Linksys router (WRT400N). When I have my work laptop using RESCUE GFE hardwired directly to the modem - and then connecting to VPN - I can connect to Lync and work normally. However, when I move connection via the router - I can no longer connect to Lync nor access some Sharepoints. I can access VPN fine but with Lync I get an error stating "Your Lync account does not allow access from outside your organization's network. Please connect to your organization's network and try again. However, I am connected via the VPN.this connection worked with a prior laptop using WinXP (I am no on Win7) and the connection thru router and using VPN worked with Communicator.I unfortunately had to reset my router - so I cannot recall if there were port settings established from the last time I had to set up the network. I didn't save the configuration; note to self - save configuration in future.
View 1 Replies View RelatedI just did a reformat on my laptop, therefore I had to reconnect with my router. I put in the correct encryption key.. however as soon as i got connected, it just kept saying *Authenticating* for about 5-10 minutes then it disconnects me.. What i can do to stop this?The router itself was installed on a shared computer (I live with several roomates) and that particular computer got replaced.. does that matter to the router? the new one doesn't have the program installed.
View 1 Replies View RelatedRecently upgraded to WRT400N from older 54G. Opened ports to my Linksys IP Cameras and can access via DynDNS address (using Modem addressort) from inside my network but not remotely. If I disable SPI Firewall it works from outside my network ... am I missing a step ... never had this problem with 54G and although I run software firewall on my computers I like the thought of added security of a firewall on my router.
View 2 Replies View RelatedBeen having random connection drops for the past few weeks where I would see the network connections to the router just drop either on a wireless connection or a wired cat 5 connection. As of tonight I cant connect to the router at all. If I disconnect and reconnect the power after 30 seconds it will come up for a short time but then I will lose it again. linksys as my router is out of warrenty. I'v searched around for similiar problems people have been having, but it seems like mostly involve just the internet connection. I still have the same firmware for the routers as the day I purchased it and the router sits on my desk in a ventilated area not overheating. I can do to further diagnose the problem, I have even tried resetting to factory defaults. I try to diagnose the problem or see if my router is just dead.
View 3 Replies View RelatedI was able to connect to the n portion of the router with the xboxs fine until last friday. now i can see the n network ssid fine but the xbox won't connect to it.
my pc connects just fine, i've powered cycle the router, tried renaming the router, opened all the required ports, reflashed the router to the current firmware.
Check to see if there is a firmware upgrade and there is. Well I updated it with the newest and only one out there. I did the upgrade, said sucessful and now it will just random reboot or something........ every few minutes the power light starts flashing....... then all the light go out, then power flashes again and it comes back up. I have tried many times to reflash it with that new firmware but no avail. I wish I had the old firmware back because it was working fine till I did this upgrade.
View 5 Replies View RelatedI cannot get internet Wake on LAN to work via my wrt400n . (It works fine on my LAN - so I know that the pc is configured properly. Further, I know that port forwarding is set up correctly, as other applications are using forwarded ports and are working correctly). The issue seems to be that the magic packets are being blocked by the router or they are received but the router doesn't know where to route them. I monitor the network and the never see the magic packet on my subnet. how do I set up a static ARP route on the wrt400n? I suspect that I may need to create a static ARP to resolve the issue.
View 1 Replies View RelatedI would like to configure it as an access point on my LAN, similar to the way my WAP55AG works.My research on the Internet and on these forums indicate that I have to disable DHCP on the router as well as use the LAN ports to connect it to my network.I am able to turn off DHCP, but assigning it a static IP address is challenging.I can set the IP address, but I am unable to set the subnet mask to 255.255.254.0 as I am only getting a set of SM in a drop down list whick are all 255.255.255.x
View 9 Replies View RelatedI have a WRT400N and approximately every 30-45 minutes the router will drop all connections (wired and wireless), all the lights will go out and then power light (far right light) will flash for a minute or so. I have tried connecting directly to my modem and I have no problems at all.
View 7 Replies View RelatedI have a WRT400N that loses connections for my PC and other devices in my house (IPHONE, IPAD etc.).Sometimes it fixes itself other times I need to to a hard reset to boot the router and then evryone can signin again
The Firmware Version: 1.0.01 B19
The operating system on my PC is WIndows 7
I have been experiencing intermittent issues with download speeds of 1-3 MB and ironically upload speeds of almost 10MB. When everything is working fine I get download speeds of about 35MB and upload speeds of 5MB which is normal. This issue comes and goes. I had Comcast come out several times and we finally pinpointed it back to the WRT400N router. The Comcast modem is a Cisco DPC3008 model. I know there are known issues with the Cisco WRT400N but have had a hard time finding the information. Any known issues for this model and if so what are the fixes. BTW, the firmware is up to date.
View 2 Replies View RelatedI'm having a little trouble connecting a new computer to my wireless network. I have a WRT400N router and I'm connecting an older computer to it. The computer runs off Windows XP and the router itself is a WUS854G. We can get the adapter to say that it is connected to the network, but the router will not assign it a new IP address or even acknowledge that it is connected on the MAC client list. We manually forced a new IP, which allowed the computer to connect (though, again, the router did not show that it had been connected to.) but despite the connection being "Excellent" we could not access the internet. Furthermore when we tried to refresh the connection the IP address reverted to the original setting.
View 2 Replies View RelatedJust bought a WRT400N and set it up using 5ghz and 2.4ghz bands, and using WPA TKIP for both. Problem is that both my laptop and my iphone occassionally lose connectivity and my iPhone says that my WPA key isn't valid.
View 4 Replies View RelatedMy E4200 recently started to randomly shut down. To say the least this is very aggravating. Nothing has changed, location still the same and it seems to be overheating or in the very least getting warm. In the last It will also shut down multiple times a day too. I have done some reading and am beginning to regret this purchase.
View 8 Replies View RelatedHaving a problem with port forwarding on their WRT400N? I'm forwarding one service (https) and this stops working if it's not accessed after a 10 days or so. The only way to get it to work again is to reboot the router. I’m running the “latest" firmware, which is an oxymoron considering it's been over 12 MONTHS since Linksys updated the code... Which is appalling considering this appears to be their flagship wireless N router.
View 5 Replies View RelatedI have the WRT400N router with the latest firmware. Recently I have noticed a device in my DHCP that I do not recognize. It is not device I own (believe me, I have racked my brain and confirmed) as it shows as an Acer pc. I cannot ping the IP address however. I have rebooted my router several times thinking maybe it's a former connected device but saved in memory but it keeps coming back. I am thinking possibly it is someone hi-jacking my Internet, but not sure. I am using WEP security but it shows a LAN connection which is strange for a wireless device. The only hard wired pc is my HP.
View 3 Replies View Related
